It’s an easy-to-use strobe light with 21 white LEDs and adjustable strobe rate. Plug-and-play right out of box, it comes in a compact case and ready to use for your next mobile DJ gig, party or anywhere you need a punch of strobing white light.
Features:
Ready to go out of the box
Manually adjustable strobe rate
Light source: 21 (white) LEDs
Power and current: 120V, 60Hz: 1W, < 0.1A operating, < 0.1A inrush
City Flash is a water resistant mini Strobe Light that will screw-in to any medium screw base light bulb socket (indoor/outdoor use)
Great for bands, DJs, home parties or special effects & theatre productions
Includes replaceable clear dome
Optional dome colors sold separately: Yellow (City Dome/Y), Green (City Dome/G), Blue (City Dome/B), or Red (City Dome/R)
3 Flash Modes: Slow Flash (1 flash per 3 second), Fast Flash (3 flashes per second), Police Flash (11 flashes per second followed by 2 second intervals)
The Techno Strobe is a 75-watt strobe that is adjustable from 1 to 20 flashes per second. A two-position switch on the rear of the unit is used to enter one of two modes of operation: sound active or manual speed. The strobes are linkable via mono cable, chasing enabled via optional controller, and DMX controllable via optional converter.
Features: 75 watts, 1-20fps 2-position switch:
Sound active
Manual speed
Linkable via mono cable (EST-MONO25FT) Chasing via optional controller DMX via optional converter
OPTIONAL CONTROLLERS
Strobe Controller (CH-751)
Light Source: CH-1000B
Power: Switchable 110V/230V 50/60Hz
Weight: 7.85lbs (3.5kgs)
Size: 10.5in x 8.5in x 8.5in, 267mm x 216mm x 216mm
The E-104 is a 70-watt ultra lightweight strobe light. At 3 pounds it is very lightweight, and packs a power punch. The flash rate may be controlled via the variable speed knob located on the back of the unit. Its parameters are any where from 1 to 15 flashes per second.
70W ultra light weight Strobe Light (Snap Shot) * Plastic high tech case design with hanging bracket * Variable speed control (1 - 15 flashes per seconds) * Flash different colored light by replacing the interchangeable Snap/D lamp covers (sold separately) * Linkable via 1/4" jacks * Can be controlled by the S-2A , S-4 , S-10 & S-Matrix * A great strobe light for bands, mobile DJs, clubs, or special effects productions * Lamp: ZB-70 * Dimensions: 7.75" x 7.75" x 8.25" * Weight: 3 lbs. * 120V or 220V operation
Very low power consumption - connect more units in a single circuit
No moving parts
Runs extremely cool! - NO Duty Cycles! - Run all night!
For use with or without fog
Max. Strobe Rate: 10 x per second
White LED Strobe with 234 bright LEDs Similar out to a 70W strobe 2 control modes: DMX-512; Master/slave Sound Active (when using DMX) 3 DMX Channels Strobe speed: control via DMX or knob on rear of unit 0-100% dimming: control via DMX or knob on rear of unit Built-in programs Light weight, compact case Dimensions (LxWxH): 7”x7.25”x7.25” / 180x185x185mm Weight: 3 lbs./ 1.5 kgs
The Flash, is our new LED Strobe Light that features an Ultra-bright 20-watt White Cree LED with variable speed (one to 10 flashes per second) and a high-tech plastic case with hanging bracket. Lights can be linked and controlled with most ¼" strobe controllers (1/4" in/out). 3 lb.
Features:
Ultra-bright 20-watt White Cree LED light source
1-10 flash/second variable strobe rate
Easy to control with most ¼" strobe controllers (1/4" in/out)
High-tech molded casing with rugged metal mounting bracket
Light Source: 20W Cree White LED Weight: 3 lbs Dimensions: 8.75 x 7 x 3.5 (240 x 220 x 130mm) Power: 90-230VAC 50-60Hz, 20w max
The LED Techno Strobe™ RGB is a 6-channel color mixing DMX strobe light. Along with blackout, dimmer, static, and strobe functions, full RGB color mixing, adjustable flash rate, dimmer and static are available via dipswitch settings.
Features:
6-channel DMX-512 LED strobe system
Blackout/static/dimmer/strobe
RGB color mixing with or without controller
Adjustable flash rate, dimmer and static in stand-alone via dipswitches
Built-in automated programs via master/slave or DMX
Built-in sound activated programs via master/slave or DMX
Compatible with CHAUVET® Satellite™ system
Linkable with LED Shadow™, LED Shadow™ 2, LED Techno Strobe™, LEDsplash™ 200B and LEDsplash™ 2 in stand-alone
The Mega Strobe III is a 750-watt strobe light featuring two channels of DMX control with variable electronic dimmer, variable electronic flash rate and built-in sound activated programs. Designed for larger venues, this strobe comes with the popular blinder effect, a built-in resettable circuit breaker, adjustable hanging bracket and gel frame.
Features:
2-channel DMX-512 strobe light
Variable electronic dimmer (0-100%)
Variable electronic flash rate (0-20fps)
Blinder / lightning effect
Includes gel frame and free 4-pack of gels (RGBY)
Built-in sound activated programs
Built-in resettable circuit breaker (no fuses)
Manual control of strobe rate and dimmer
Light source: CH-750B 750W 5600K 500hrs
Power and current: 120V, 60Hz: 520W, 14.3A operating, 0A inrush, PF 0.3
AC power: 115V/60Hz or 230V/50Hz
Weight: 10.6lbs (4.7kg)
Size: 15.2in x 9.3in x 11.3in / 386mm x 236mm x 287mm
LED Techno Strobe The LED Techno Strobe™ is a 3-channel white DMX strobe light. Along with blackout, dimmer, static, and strobe functions, an adjustable flash rate, dimmer and static are available via dipswitch settings.
Features:
3-channel DMX-512 LED white strobe light
Blackout/static/dimmer/strobe
Adjustable flash rate, dimmer and static in stand-alone via dipswitches
Built-in automated programs via master/slave or DMX
Built-in sound activated programs via master/slave or DMX
Compatible with CHAUVET® Satellite™ system
Linkable with LED Shadow™, LED Shadow™2, LED Techno Strobe™ RGB, LEDsplash™ 200B and LEDsplash™ 2 in stand-alone
Additional power output: max 50 units @120V (see manual for details)
Includes brackets for wall and truss mounting
Beam angle: 21° x 24°
Beam angle: 40° x 43°
Lux: 1,321 @ 1m
Light Source: 192 (white) LEDs 100,000hrs
Color temperature: 6,500° - 8,000°K
Power and current: 120V, 60Hz: 0.1A operating, 0.2A inrush
AC power: Autoswitching 100V - 240V 50/60Hz
Weight: 4.9lbs (2.2kgs)
Size: 14in x 9.75in x 6.5in, 356mm x 248mm x 165mm
A revolution in Strobe Lighting, Elation introduces the PROTRON STAR. This Strobe uses a 750 Lamp. However with its "Power Burst" Feature the PROTRON STAR projects a powerfull 1500watt ouput.
The Power Burst creates a blinder effect with its High Intesity Super fast flashes. Using thermal sensing technology the Strobe will not thermal out.
Features:
High Power Strobe Lighting Fixture• 1500Watt Power Burst
Flash Range 1-15 flasher per sec.
0-100% Dimming
Control Features:
Usitt Dmx-512
3 DMX Channels
3 pin XLR serial input/output
Dip Switches for DMX and stand alone mode
DMX Mode features:
Flash Speed
Flash Dimmer
Duration
Stand-Alone Features:
Stand Alone settings
Selectable Intensity
Selectable speed
Lamp: ZB-300 (750W) Dimensions (LxWxH): 10 x14.5 x 9.2 / 254 x 368 x 249mm Weight: 14lbs / 6.4 kgs. Fuse: 20 amp fuse Voltage: 120V Power draw: 10 amp Fan cooled: 1 axial fan for head 1 for base. Thermal Protection
A revolution in Strobe Lighting, Elation introduces the PROTRON COLOR. This Strobe uses a 750 Lamp. However with its "Power Burst" Feature the PROTRON COLOR projects a powerfull 1500watt ouput.
The Power burst creates a blinder effect with its High Intesity Super fast flashes. Using thermal sensing technology the Strobe will not thermal out. Along with the High Ouput Burst, the PROTRON COLOR includes a Scroller with 3 colors + Split colors. The PROTRON COLOR uses 5 DMX channels to operate all its features.
Features:
High Power Strobe Lighting Fixture
1500 watt Power Burst
Flash Range 1-15 flasher per sec.
0-100% Dimming
Uses standard color gels
Control Features:
USITT DMX-512
5 DMX Channels
3 pin XLR serial input/ output
Dip Switches for DMX and stand alone mode
DMX Mode features:
Flash Speed
Flash Dimmer
Duration
Color Scrolling
Motor Speed
Stand-Alone Features:
Stand Alone settings
Selectable Intensity
Selectable speed
Selectable Color or Color Scroll
Selectable Speed & Rotation
Lamp: ZB-300 (750W) Dimensions (LxWxH): 10 x 22 x 9.6 in. / 254 x 559 x 244mm Weight: 24lbs. / 10.9kgs. Fuse: 20 amp fuse Voltage: 120V Power draw: 10 amp Fan cooled: 1 axial fan for head 1 for base. Thermal Protection
The Atomic 3000 DMX is a powerful and rugged, 3000 W high-impact strobe.
The Atomic is dimmable from 0-100%. Flash duration is controllable and for ultimate flexibility and variety of effect, variable adjustment of flash rate (20ms to 2 seconds) and flash intensity is possible.
The Atomic 3000 DMX is both intense and intelligent. DMX controllable, it employs a smart, integrated heat control that eliminates the need for cool down time.
Features:
3000 W long-life Xenon lamp included
5600 K color temperature
Continuous blinder effect with auto fade
Quiet temperature-controlled fan cooling
Smart integrated heat control eliminates cool down time
Atomic Detonator remote control, socket kit for lamp change
Auto-ranging power supply (100-240 V, 50/60 Hz)
DMX, stand-alone, master/slave or Detonator remote control
Preprogrammed special effects
Physical Length: 425 mm (16.7 in.) without bracket Width: 245 mm (9.6 in.) without bracket Height: 240 mm (9.4 in.) without bracket Weight: 7.5 kg (16.5 lbs.) without bracket
Lamp Type: Xenon discharge Approved lamps: MAX-15 Xenon (200-240 V power), MAX-7 Xenon (100-120 V power)
Dynamic Effects Variable strobe: 0 - 650 ms (50 Hz supply), or 0 - 530 ms (60 Hz supply) Strobe rate: 0 - 25 flashes/second (50 Hz supply), 0 - 30 flashes/second (60 Hz supply) Blinder effect: Continuous with auto fade Strobe intensity: Blackout - maximum Special effects: Ramp up, ramp down, ramp up-down, random flash, lightning, spikes, blinder, single flash
Control and Programming Control options: DMX, stand-alone, multi-fixture chase (with Detonator remote), MC-1 DMX channels: 1, 3, and 4 channel modes Stand-alone control: Via N.O. or N.C. SPST switch Stand-alone options: Selectable flash rate or blinder effect Setting and addressing: DIP switch Protocol: DMX512 Receiver: RS-485
Construction Housing: Steel Finish: Electrostatic powder-coated Color: Black
Installation Minimum distance to combustible materials: 0.5 m (1.6 ft.) Minimum distance to illuminated surfaces: 1 m (3.3 ft.) Minimum clearance around fan and air vents: 0.1 m (0.3 ft.) Orientation: Any Mounting points: Five 12 mm (0.5 in.) holes in mounting bracket
Connections Power connection: 1.5 m (4.9 ft.) cable tail, 3 x 2.5 mm2/AWG 13 DMX data in/out: 3-pin and 5-pin XLR sockets
Electrical AC power (MAX-7 model): 100-120 V nominal, 50/60 Hz AC power (MAX-15 model): 200-240 V nominal, 50/60 Hz Peak current consumption: 33 A Typical current consumption (MAX-15, high power mode): 8 A Main fuse (all AC power voltages): 20 AT (slow blow), 250 V Power supply unit: Auto-ranging electronic switch-mode
Thermal Maximum ambient temperature (Ta max.): 40° C (104° F) Maximum lamp socket temperature: 120° C (248° F)