INSIGNIA20 *Display product no box* Discontinued item, guaranteed to work. Final Sale.*
The Insignia 2.0 is a 5-channel DMX barrel scanner. It features separate color and gobo wheels, is fully programmable, and has Gobo Bounce. The unit contains built-in beat activated and automatic programs, and automatically enters stand alone when no DMX signal is present. The Insignia 2.0 is linkable with the Insignia, Intimidator, Intimidator 2.0 and Intimidator 2.0 HTI.
Features:
5-channel DMX-512 scanner
Pan: 180° / tilt: 360°
Color wheel: 11 colors + white, 1 quad color, 1 tri color & Rainbow color spin effect
VioROLL LED The American DJ VioROLL LED is a high output, low maintenance Moonflower effect with a smooth, stepper motor driven scanning barrel mirror. It’s 10-watt Quad LED source produces dozens of red, green, blue and white (RGBW) beams from it’s exciting built-in programs.
The VioROLL LED has three operational modes (DMX, Master/Slave, Sound Active), has a Pan/Tilt Inversion Mode and a long-life 30,000 hour rated LED. This unit offers many useful features not found on other effect lighting in this price range, such as: 4-button DMX menu, 1.8 degree stepper motors, IEC AC IN/OUT on rear to daisy chain power, ADJ UC3 easy-to-use controller compatibility and a safety hook.
LED DMX-512 barrel mirrored scanner with sharp Red, Green, Blue & White Beams Bright 10W RGBW Quad LED 2 DMX Channel Modes (1 Channel or 5 Channels) 4-Button menu system LED Display making it easy to navigate 3 Operational modes: DMX controller, Master/Slave & Sound Active Exciting built-in lighting programs Pan/Tilt Inversion Mode: when using 4 scanners in Master/Slave Scanner 1 & 3 sync opposite Scanner 2 & 4 Manual focusing lens Dimming: 0-100% Strobe effect Beam angle: 30-degrees X/Y mirror movement 1.8 degree Stepper motors with micro stepping Hanging Bracket + safety hook included Compatible with American DJ UC3 Series easy-to-use controllers (sold Separately) Run all night – No duty cycle – Unit stay cool all night No cooling fan required - Very little maintenance needed IEC AC IN/OUT on rear to daisy chain power Extreme long lifetime of the LED (30,000 hr. rating) LUX @ 3M: Red = 177; Green = 493; Blue = 11; White = 620 Power consumption: 34W max Multi-voltage operation: AC 100V~240V 50/60Hz- IEC socket Dimensions (LxWxH): 16.5"x6.5"x6.75" / 420x161x172mm Weight: 10 lbs. / 4.2kg.
Very low power consumption - connect more units in a single circuit
Runs extremely cool! - NO Duty Cycles! - Run all night!
Razor sharp beams
Output based on visual side-by-side comparison with halogen fixtures
LED DMX-512 flat mirrored scanner with sharp Red, Green, Blue & White Beams 52 total LEDs: 16 Red, 12 Green, 12 blue and 12 White 4 DMX Channels 4-Button LCD DMX Display Linkable via XLR connections Output similar to a 250W Halogen lamp Wide beam spread covers a large area Beam angle: 21-degreees 3 operation modes: DMX, Sound Active & Master/Slave Sound active from built-in programs Strobe function Manual focusing lens Very low power consumption (Power Draw: 12W) Extreme long lifetime of the LEDs (100,000 hr. rating) Includes hanging bracket 1/4” input for optional UC-3 remote control (sold separately) Multi-voltage input: 100V-265V, 50/60Hz Dimensions: 17” x 6” x 6” / 429 x 154 x 150 mm Weight: 7 lbs. / 2.8 kgs.
Very low power consumption - connect more units in a single circuit
Runs extremely cool! - NO Duty Cycles! - Run all night!
Razor sharp beams *Output based on visual side-by-side comparison with halogen fixtures
LED DMX-512 barrel mirrored scanner with sharp Red, Green, Blue & White Beams 52 total LEDs : 16 Red, 12 Green, 12 blue and 12 White 4 DMX Channels 4-Button LCD DMX Display Linkable via XLR connections Output similar to a 250W Halogen lamp Wide beam spread covers a large area Beam angle: 21-degreees 3 operation modes: DMX, Sound Active & Master/Slave Sound active from built-in programs Strobe function Manual focusing lens Very low power consumption (Power Draw: 12W) Extreme long lifetime of the LEDs (100,000 hr. rating) Includes hanging bracket 1/4” input for optional UC-3 remote control (sold separately) Multi-voltage input: 100V-265V, 50/60Hz Dimensions: 17” x 6” x 6” / 429 x 154 x 150 mm Weight: 7 lbs. / 2.8 kg
VioSCAN LED The American DJ VioScan LED is a high output, low maintenance Moonflower effect with a smooth, stepper motor driven scanning mirror. It’s 10-watt Quad LED source produces dozens of red, green, blue and white (RGBW) beams from it’s exciting built-in programs.
The VioScan LED has three operational modes (DMX, Master/Slave, Sound Active), has a Pan/Tilt Inversion Mode and a long-life 30,000 hour rated LED. This unit offers many useful features not found on other effect lighting in this price range, such as: 4-button DMX menu, 1.8 degree stepper motors, IEC AC IN/OUT on rear to daisy chain power, ADJ UC3 easy-to-use controller compatibility and a safety hook.
LED DMX-512 flat mirrored scanner with sharp Red, Green, Blue & White Beams Bright 10W RGBW Quad LED 2 DMX Channel Modes (1 Channel or 5 Channels) 4-Button menu system LED Display making it easy to navigate 3 Operational modes: DMX controller, Master/Slave & Sound Active Exciting built-in lighting programs Pan/Tilt Inversion Mode: when using 4 scanners in Master/Slave Scanner 1 & 3 sync opposite Scanner 2 & 4 Manual focusing lens Dimming: 0-100% Strobe effect Beam angle: 30-degrees X/Y mirror movement 1.8 degree Stepper motors with micro stepping Hanging Bracket + safety hook included Compatible with American DJ UC3 Series easy-to-use controllers (sold Separately) Run all night – No duty cycle – Unit stay cool all night No cooling fan required - Very little maintenance needed IEC AC IN/OUT on rear to daisy chain power Extreme long lifetime of the LED (30,000 hr. rating) LUX @ 3M: Red = 288; Green = 713; Blue = 32; White = 958 Power consumption: 34W max Multi-voltage operation: AC 100V~240V 50/60Hz- IEC socket Dimensions (LxWxH): 16.5"x6.5"x6.75" / 420x161x172mm Weight: 10 lbs. / 4.2kg.
It’s a compact LED scanner with plenty of features to enhance any show. It has awesome sound-activated programs which dance to the beat of the music as well as easy access to built-in automated programs for generating a synchronized show in master/slave mode.
Its combined color/gobo wheel creates 7 saturated projections. The electronic dimming and strobe feature operates silently and you can power link up to 16 units to save time running cables and extension cords.
Features:
Compact LED scanner with plenty of features to enhance any show
The T-Rex is a 250 W scanner featuring a quad angled mirror for aggressive mid-air effects and a combined color/gobo wheel offering multiple colors and a full array of 19 gobo patterns.
An awesome force has evolved…and it’s the most dangerous threat yet to lower light forms.
King of its habitat, the T-Rex is the aggressive new companion to Martin’s other famous predator, the Raptor. Together they form a deadly new partnership.
Fast and furious, the T-Rex deploys its unique quad angled mirror to create a devastating salvo of effects: light beams with razor sharp intensity slice through the air, changing color and direction to the beat of the music.
And being a cold-blooded monster, the T-Rex remains cool at all times. Its high-speed cooling fan means the T-Rex is ready for action all night long. Features:
250 W halogen lamp
1000 hour lamp included
Combined color and gobo wheel
12 gobos
19 gobos plus open
Faceted rotating parabolic reflector
Safety approvals CE
Rigorously tested for total reliability
Music triggered
Continuous operation - no cool down time needed
Physical Length: 490 mm (19.3 in.) Width: 164 mm (6.5 in.) Height: 190 mm (7.5 in.) Weight: 7.5 kg (16.5 lbs.)
Lamp Type: 250 W, 24 V ELC halogen Fitted as standard: Philips ELC 10H 250 W (1000 hrs.) Socket: GX 5.3 Approved alternative lamp(s): Osram ELC 24 V/250 W (50 hrs.), Osram ELC-7/X 24 V/250 W (700 hrs.)
Optics Manual focus: 2 m (6.6 ft.) - 20 m (65.6 ft.)
Control and Programming Control: Music trig, automatic level sensitivity adjustment
Construction Housing: Steel and aluminum
Installation Mounting points: Adjustable floorstand/mounting bracket Orientation: Any
Connections AC power input: 3-pin IEC male socket
Electrical AC power: 110-120 V, 50/60 Hz (US model) AC power: 230-240 V, 50/60 Hz (EU model) Main fuse: US model 5.0 AT, EU model 2.5 AT (both slow blow)
Typical Power and Current 110 V, 60 Hz: 270 W, 2.4 A 120 V, 60 Hz: 270 W, 2.2 A 230 V, 50 Hz: 270 W, 1.2 A Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Thermal Cooling: Forced air Maximum ambient temperature (Ta max.): 40° C (104° F) Maximum surface temperature, steady state, Ta=40° C: 60° C (140° F) Total heat dissipation (calculated, +/- 10%): 920 BTU/hr.
It’s a bright, compact LED scanner with tons of features, like built-in movement macros and move-in-black features, silent electronic dimming and strobe features, awesome sound-activated programs and easy access to built-in automated programs to generate a synchronized show in master/slave mode. Its high-frequency LED dimming allows for flicker-free video operation, plus you can power link up to 8 units to save time running cables and extension cords.
Features:
Bright and compact LED scanner with tons of features to enhance any show
7 gobos plus 7 separate, saturated colors allow extra flexibility and effects
Built-in movement macros and move-in-black features minimize programming time
Electronic dimming and strobe feature delivers silent operation
Individual reset of pan/tilt, color and gobo allows the show to continue no matter what happens
High-frequency LED dimming allows for flicker-free video operation
Power link up to 8 units to save time running cables and extension cords
Included double-bracket yoke doubles as a floor stand to increase mounting positions
Awesome sound-activated programs dance to the beat of the music
Easy-access to built-in automated programs generate a synchronous show for master/slave
DMX channels: 5 or 8
Pan& tilt: 180° / 90°
Colors: 7, split colors, continuous spin at variable speeds
Gobos: 7 (5 metal + 2 glass), continuous spin at variable speeds
New advanced high performance light source - 30% brighter than the original X-Scan LED 20W LED source
Improved optical system – Sharper spot and better focus
More color saturation
No color ring around the spot
High performance mobile DMX scanner with a new advanced high performance LED source 8 colors + white 8 gobos + spot Separate Color & Gobo Wheels 8 DMX Channels 4-Button menu system LED Display making it easy to navigate 3 Operational modes: DMX controller, Master/Slave & Sound Active Built-in lighting programs Pan/Tilt Inversion Mode: When using 4 scanners in master/slave scanner 1 & 3 sync opposite scanner 2 & 4 Sound Active Audio sensitivity knob Compact & portable design Manual focusing lens Gobo Shake effect 13-degree beam angle X/Y mirror movement Stepper motors with micro stepping DMX-512 protocol Fan cooled Hanging Bracket Included Power consumption: 44W Compatible with American DJ UC3 Series easy-to-use controllers (sold Separately) Multi-voltage operation: 100V~240V 50/60Hz- IEC socket Dimensions (LxWxH): 8"x6"x15.25" / 200x150x386mm Weight: 10 lbs. / 4.4 kgs.
The Mania SCX500 is a powerful yet compact 150 W halogen scanner with separate color and gobo wheels for a broad range of effects.
Features:
150 W halogen lamp
500 hour lamp included
15 solid colors plus 5 multi colors
Manual focus
15 gobos plus blackout
Strobe effect with gobo wheel
High-speed mirror
All major safety approvals CE, ETL and CETL
Rigorously tested for total reliability
DMX, stand alone (music or auto-trig) and master/slave function
Continuous operation - no cool down time needed
12 pre-programmed macros for fast start-up
Physical Length: 442 mm (17.4 in.) Width: 200 mm (7.9 in.) Height: 178 mm (7.0 in.) Height: 364 mm (14.3 in.) including bracket Weight: 6.7 kg (14.8 lbs.) including bracket Lamp Type: 150 W, 15 V MR16 halogen Fitted as standard: Philips EFR/5H JCR H5 Socket: GZ 6.35 Dynamic Effects Color wheel: 14 single colors + 5 multi-colors + open, full and split color selection Gobo wheel: 16 gobos Dimmer: 0 - 100% Motorized mirror: 180° pan and 72° tilt Optics Beam angle: 15° Manual focus: 2 m (6.6 ft.) - 20 m (65.6 ft.) Control and Programming Control options: DMX, stand-alone, synchronized (master/slave) DMX channels: 8/6 DMX address setting: Onboard control panel with 3-digit display Macro programs selectable via DMX: 12 Stand-alone trigger options: Auto trig (selectable via control panel or via DMX), music trig Stand-alone programming: Onboard control panel with 3-digit display Protocol: USITT DMX512/1990 Receiver: RS-485 Firmware update: Serial upload via DMX link Construction Housing: Steel and aluminum Installation Mounting points: Adjustable bracket, mounting plate Orientation: Any Connections AC power input: 3-pin IEC male socket DMX data in/out: 3-pin locking XLR Electrical AC power (US models): 110-120 V nominal, 60 Hz AC power (EU models): 220-240 V nominal, 50 Hz Main fuse (110-120 V power): 3.15 AT (slow blow) Main fuse (220-240 V power): 2 AT (slow blow) Typical Power and Current US model 110 V, 60 Hz: 138 W, 1.27 A 115 V, 60 Hz: 150 W, 1.30 A 120 V, 60 Hz: 159 W, 1.35 A EU model 220 V, 50 Hz: 144 W, 0.66 A 230 V, 50 Hz: 154 W, 0.66 A 240 V, 50 Hz: 164 W, 0.68 A Measurements made at nominal voltage. Allow for a deviation of +/- 10%. Thermal Cooling: Forced air Maximum ambient temperature (Ta max.): 40° C (104° F) Total heat dissipation (calculated, +/- 10%): 512 BTU/hr.
The Mania EFX500 is a powerful, “full house” 250 W halogen effect that kicks out a dizzying array of razor sharp effects and patterns.
Features:
250 W halogen lamp
1000 hour lamp included
11 gobos plus blackout
Manual focus
Strobe effect with gobo wheel
Rotating and swiveling mirror drum
All major safety approvals CE, ETL and CETL
Rigorously tested for total reliability
DMX, stand alone (music or auto-trig) and master/slave function
Continuous operation - no cool down time needed
12 pre-programmed macros for fast start-up
Physical Length: 410 mm (16.1 in.) Width: 500 mm (19.7 in.) Height: 230 mm (9.1 in.) Weight: 12.5 kg (27.6 lbs.) All dimensions and weights include the supplied mounting plate.
Lamp Type: 250 W, 24 V ELC halogen Approved lamps: Philips ELC 10H 250 W (1000 hrs.) Socket: G5.3
Dynamic Effects Motorized rotating parabolic mirror dish Gobo wheel: 11 colored gobos plus blackout Motorized mirror drum: 180° pan (swivel) and 360° tilt (continuous rotation) Electronic dimming: 0 - 100% Shutter: Strobe effect variable up to 8 Hz
Optics Manual focus: 2 m (6.6 ft.) - 20 m (65.6 ft.)
Control and Programming Control options: DMX, stand-alone, synchronized (master/slave) DMX channels: 7/9 DMX address setting: Onboard control panel with 3-digit display Macro programs selectable via DMX: 12 Stand-alone trigger options: Music trig, auto trig (both selectable via control panel or via DMX) Music trig sensitivity: Electronically adjustable Protocol: USITT DMX512/1990 Receiver: RS-485 Firmware update: Serial upload via DMX link
Construction Housing: Steel and aluminum
Installation Mounting points: Adjustable mounting bracket Orientation: Any
Connections AC power input: 3-pin IEC male socket DMX data in/out: 3-pin locking XLR
Electrical AC power: Switch-selectable 110-120 V, 60 Hz / 220-240 V, 50 Hz Main fuse: 3.15 AT (slow blow)
Typical Power and Current 110 V, 60 Hz: 229 W, 2.1 A, PF 0.997 115 V, 60 Hz: 248 W, 2.2 A, PF 0.997 120 V, 60 Hz: 264 W, 2.2 A, PF 0.997 220 V, 50 Hz: 229 W, 1.1 A, PF 0.995 230 V, 50 Hz: 247 W, 1.1 A, PF 0.995 240 V, 50 Hz: 265 W, 1.2 A, PF 0.994 Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Thermal Cooling: Forced air Maximum ambient temperature (Ta max.): 40° C (104° F) Maximum surface temperature, steady state, Ta=40° C: 100° C (212° F) Total heat dissipation (calculated, +/- 10%): 900 BTU/hr.
It’s a bright, compact LED scanner with a crisp, 3-sided prism which duplicates the beam for great effects and a larger coverage area. Its high-frequency LED dimming allows for flicker-free video operation and it’s packed with tons of features to enhance any show. It features a motorized focus for crisp gobos, sound-activated programs, and built-in automated programs for a synchronized show in master/slave mode. Plus, you can power link up to 4 units and save some time running cables and extension cords.
Features:
Bright and compact LED scanner with tons of features to enhance any show
7 interchangeable, rotating gobos plus 8 separate, saturated colors allow extra flexibility and effects
Built-in movement macros and move-in-black features minimize programming time
Motorized focus allows the gobos to be crisp when projected at almost any distance
Electronic dimming and strobe features deliver silent operation with no moving parts
Individual reset of pan/tilt, color, gobo, and focus allows the show to continue no matter what happens
High-frequency LED dimming allows for flicker-free video operation
Power link up to 4 units to save time running cables and extension cords
Awesome sound-activated programs dance to the beat of the music
Easy-access to built-in automated programs generate a synchronous show for master/slave
DMX channels: 8 or 11
Pan & tilt: 180° / 90°
Colors: 8, split colors, continuous scroll at variable speeds
Gobos: 7 (5 metal + 2 glass), interchangeable, slot-n-lock, rotating, continuous scroll at variable speeds
Gobo sizes: 23.8mm outside, 20.9mm image, 2mm max thickness
The Mania EFX800 is a 150 W discharge light with a broad sweeping flower effect and a rotating glass color paddle which gives your night an ever changing look and feel.
Features:
150 W discharge lamp
Long lamp life (6000 hrs)
Rotating and indexable color paddlewheel
12 gobos
Manual focus
Separate shutter for strobe effect
All major safety approvals CE, ETL and CETL
Rigorously tested for total reliability
DMX, stand alone (music or auto-trig) and master/slave function
The Mania SCX600 is a powerful 250 W halogen scanner with the highest quality optical system for maximum light output and true high-definition image quality.
Features:
250 W halogen lamp
1000 hour lamp included
9 interchangeable colors plus open
Manual focus
7 interchangeable rotating gobos plus open (2 glass 5 metal)
Separate shutter for strobe effect
High-speed mirror
All major safety approvals CE, ETL and CETL
Rigorously tested for total reliability
DMX, stand alone (music or auto-trig) and master/slave function
Continuous operation - no cool down time needed
12 effect plus 12 pan/tilt pre-programmed macros for fast start-up
Physical Length: 525 mm (20.7 in.) Width: 240 mm (9.4 in.) Height: 203 mm (8.0 in.) Height: 408 mm (16.1 in.) including bracket Weight: 12.3 kg (27.1 lbs.) including bracket
Lamp Type: 250 W, 24 V ELC halogen Approved lamps: Philips ELC 10H 250 W (1000 hrs.) Socket: G5.3 Dynamic Effects Color wheel: 9 interchangeable colors + open, full and split color selection Rotating gobo wheel: 7 interchangeable rotating gobos (5 metal, 2 coated glass), gobo selection, continuous rotation and shake Electronic dimming: 0 - 100% Shutter: Strobe effect, music trig, instant open and blackout Motorized mirror: 198° pan and 72° tilt Optics Beam angle: 18.3° Manual focus: 2 m (6.6 ft.) - 20 m (65.6 ft.) Control and Programming Control options: DMX, stand-alone, synchronized (master/slave) DMX channels: 7/11 DMX address setting: Onboard control panel with 4-digit display Stand-alone trigger options: Music trig (selectable via control panel or via DMX), auto trig Stand-alone programming: Onboard control panel with 4-digit display Protocol: USITT DMX512/1990 Receiver: RS-485 Firmware update: Serial upload via DMX link Construction Housing: Steel and aluminum Gobos Outside diameter: 22.5 mm (0.9 in.) + 0/- 0.3 mm (0.01 in.) Maximum image diameter: 17 mm (0.7 in.) Installation Mounting points: Adjustable bracket Orientation: Any Connections AC power input: 3-pin IEC male socket DMX data in/out: 3-pin locking XLR Electrical AC power: Switch-selectable 110-120 V, 60 Hz / 220-240 V, 50 Hz Main fuse: 3.15 AT (slow blow) Typical Power and Current 110 V, 60 Hz: 241 W, 2.2 A, PF 0.993 120 V, 60 Hz: 278 W, 2.3 A, PF 0.993 220 V, 50 Hz: 241 W, 1.1 A, PF 0.995 230 V, 50 Hz: 260 W, 1.2 A, PF 0.995 240 V, 50 Hz: 278 W, 1.2 A, PF 0.994 Measurements made at nominal voltage. Allow for a deviation of +/- 10%. Thermal Cooling: Forced air Maximum ambient temperature (Ta max.): 40° C (104° F) Maximum surface temperature, steady state, Ta=40° C: 80° C (176° F) Total heat dissipation (calculated, +/- 10% at 110 V, 60 Hz / 230 V, 50 Hz): 820 / 890 BTU/hr.
The Mania EFX700 is a dazzling 150 W discharge flower effect light with an incredibly wide spread and an array of vibrant colors to keep the dance floor jumping.
Features:
150 W discharge lamp
Long lamp life (6000 hrs)
12 colored gobos
Manual focus
Separate shutter for strobe effect
Rotating parabolic mirror dish
All major safety approvals CE, ETL and CETL
Rigorously tested for total reliability
DMX, stand alone (music or auto-trig) and master/slave function
Continuous operation - no cool down time needed
12 pre-programmed macros for fast start-up
Physical Length: 400 mm (15.7 in.) Width: 500 mm (19.7 in.) Height: 230 mm (9.1 in.) Weight: EU model 14.1 kg (31.1 lbs.), US model 16.6 kg (36.6 lbs.) All dimensions and weights include the supplied mounting plate.
Optics Manual focus: 2 m (6.6 ft.) - 20 m (65.6 ft.)
Control and Programming Control options: DMX, stand-alone, synchronized (master/slave) DMX channels: 4/6 DMX address setting: Onboard control panel with 3-digit display Macro programs selectable via DMX: 12 Stand-alone trigger options: Music trig (selectable via control panel or via DMX), auto trig Music trig sensitivity: Electronically adjustable Protocol: USITT DMX512/1990 Receiver: RS-485 Firmware update: Serial upload via DMX link
Construction Housing: Steel and aluminum
Installation Mounting points: Adjustable mounting bracket Orientation: Any
Connections AC power input: 3-pin IEC male socket DMX data in/out: 3-pin locking XLR
Electrical AC power (US models): 110-120 V nominal, 60 Hz AC power (EU models): 220-240 V nominal, 50 Hz Main fuse (110-120 V power): 3.15 AT (slow blow) Main fuse (220-240 V power): 2 AT (slow blow)
Typical Power and Current US model 110 V, 60 Hz: 189 W, 1.8 A, PF 0.963 115 V, 60 Hz: 207 W, 1.9 A, PF 0.964 120 V, 60 Hz: 226 W, 2.0 A, PF 0.957 EU model 220 V, 50 Hz: 181 W, 0.9 A, PF 0.950 230 V, 50 Hz: 197 W, 1.0 A, PF 0.926 240 V, 50 Hz: 204 W, 1.0 A, PF 0.923 Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Thermal Cooling: Forced air Maximum ambient temperature (Ta max.): 40° C (104° F) Maximum surface temperature, steady state, Ta=40° C: 80° C (176° F) Total heat dissipation (calculated, +/- 10% at 110 V, 60 Hz / 230 V, 50 Hz): 650 / 670 BTU/hr.
The Mania EFX600 is a bright, feature-rich 150 W discharge effect light with a dizzying array of razor sharp effects and patterns.
Features:
150 W discharge lamp
Long lamp life (6000 hrs)
12 colored gobos
Manual focus
Separate shutter for strobe effect
Rotating and swiveling mirror drum
All major safety approvals CE, ETL and CETL
Rigorously tested for total reliability
DMX, stand alone (music or auto-trig) and master/slave function
Continuous operation - no cool down time needed
12 pre-programmed macros for fast start-up
Physical Length: 410 mm (16.1 in.) Width: 500 mm (19.7 in.) Height: 230 mm (9.1 in.) Weight: EU model 14 kg (30.9 lbs.), US model 16.5 kg (36.4 lbs.) All dimensions and weights include the supplied mounting plate.
Optics Manual focus: 2 m (6.6 ft.) - 20 m (65.6 ft.)
Control and Programming Control options: DMX, stand-alone, synchronized (master/slave) DMX channels: 6/8 DMX address setting: Onboard control panel with 3-digit display Macro programs selectable via DMX: 12 Stand-alone trigger options: Music trig (selectable via control panel or via DMX), auto trig Music trig sensitivity: Electronically adjustable Protocol: USITT DMX512/1990 Receiver: RS-485 Firmware update: Serial upload via DMX link
Construction Housing: Steel and aluminum
Installation Mounting points: Adjustable mounting bracket Orientation: Any
Connections AC power input: 3-pin IEC male socket DMX data in/out: 3-pin locking XLR
Electrical AC power (US models): 110-120 V nominal, 60 Hz AC power (EU models): 220-240 V nominal, 50 Hz Main fuse (110-120 V power): 3.15 AT (slow blow) Main fuse (220-240 V power): 2 AT (slow blow)
Typical Power and Current US model 110 V, 60 Hz: 189 W, 1.8 A, PF 0.963 115 V, 60 Hz: 207 W, 1.9 A, PF 0.964 120 V, 60 Hz: 226 W, 2.0 A, PF 0.957 EU model 220 V, 50 Hz: 181 W, 0.9 A, PF 0.950 230 V, 50 Hz: 197 W, 1.0 A, PF 0.926 240 V, 50 Hz: 204 W, 1.0 A, PF 0.923 Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Thermal Cooling: Forced air Maximum ambient temperature (Ta max.): 40° C (104° F) Maximum surface temperature, steady state, Ta=40° C: 80° C (176° F) Total heat dissipation (calculated, +/- 10% at 110 V, 60 Hz / 230 V, 50 Hz): 650 / 670 BTU/hr.
The Mania SCX600 is a powerful 250 W halogen scanner with the highest quality optical system for maximum light output and true high-definition image quality.
Features:
250 W halogen lamp
1000 hour lamp included
9 interchangeable colors plus open
Manual focus
7 interchangeable rotating gobos plus open (2 glass 5 metal)
Separate shutter for strobe effect
High-speed mirror
All major safety approvals CE, ETL and CETL
Rigorously tested for total reliability
DMX, stand alone (music or auto-trig) and master/slave function
Continuous operation - no cool down time needed
12 effect plus 12 pan/tilt pre-programmed macros for fast start-up
Physical Length: 525 mm (20.7 in.) Width: 240 mm (9.4 in.) Height: 203 mm (8.0 in.) Height: 408 mm (16.1 in.) including bracket Weight: 12.3 kg (27.1 lbs.) including bracket Lamp Type: 250 W, 24 V ELC halogen Approved lamps: Philips ELC 10H 250 W (1000 hrs.) Socket: G5.3 Dynamic Effects Color wheel: 9 interchangeable colors + open, full and split color selection Rotating gobo wheel: 7 interchangeable rotating gobos (5 metal, 2 coated glass), gobo selection, continuous rotation and shake Electronic dimming: 0 - 100% Shutter: Strobe effect, music trig, instant open and blackout Motorized mirror: 198° pan and 72° tilt Optics Beam angle: 18.3° Manual focus: 2 m (6.6 ft.) - 20 m (65.6 ft.) Control and Programming Control options: DMX, stand-alone, synchronized (master/slave) DMX channels: 7/11 DMX address setting: Onboard control panel with 4-digit display Stand-alone trigger options: Music trig (selectable via control panel or via DMX), auto trig Stand-alone programming: Onboard control panel with 4-digit display Protocol: USITT DMX512/1990 Receiver: RS-485 Firmware update: Serial upload via DMX link Construction Housing: Steel and aluminum Gobos Outside diameter: 22.5 mm (0.9 in.) + 0/- 0.3 mm (0.01 in.) Maximum image diameter: 17 mm (0.7 in.) Installation Mounting points: Adjustable bracket Orientation: Any Connections AC power input: 3-pin IEC male socket DMX data in/out: 3-pin locking XLR Electrical AC power: Switch-selectable 110-120 V, 60 Hz / 220-240 V, 50 Hz Main fuse: 3.15 AT (slow blow) Typical Power and Current 110 V, 60 Hz: 241 W, 2.2 A, PF 0.993 120 V, 60 Hz: 278 W, 2.3 A, PF 0.993 220 V, 50 Hz: 241 W, 1.1 A, PF 0.995 230 V, 50 Hz: 260 W, 1.2 A, PF 0.995 240 V, 50 Hz: 278 W, 1.2 A, PF 0.994 Measurements made at nominal voltage. Allow for a deviation of +/- 10%. Thermal Cooling: Forced air Maximum ambient temperature (Ta max.): 40° C (104° F) Maximum surface temperature, steady state, Ta=40° C: 80° C (176° F) Total heat dissipation (calculated, +/- 10% at 110 V, 60 Hz / 230 V, 50 Hz): 820 / 890 BTU/hr.
Vizi Scan LED Pro The Vizi Scan LED Pro is a high performance DMX Scanner that features two effects in one: A hard edge spot beam or a frost (wash) effect! This fixture is powered by a high output 50W long life LED source (6500°K, 60,000 hr.) with a low power draw of 130W.
This unit is compact & light weight and offers plenty of pro features such as: 8 Dichroic Colors + white (includes UV), 7 Rotating Gobos (Interchangeable) a Prism Wheel with 3-facet and Infinite prisms, Remote Focus, Gobo Indexing, Dimming (0-100%), Strobe effect, 2 DMX channel modes (12 or 14 Ch.) and a Gobo Scroll mode.
The Vizi Scan LED Pro also features the SLOCK™ - Slide Lock gobo changing system - that makes removing and installing gobos much easier.
Features:
50W High Output LED DMX Scanner that produces a spot and a frost (wash) effect
RDMX - Remote DMX addressing (Change DMX values remotely from any DMX console)
7 Rotating, Interchangeable Gobos + Spot (5 metal + 2 glass gobos) with SLOCK™ (Slide Lock) gobo changing system
7 Colors + UV Filter + White
Independent gobo and color wheels
12 Ch. or 14 Ch. DMX Modes
4 operational modes: DMX, Master/Slave, Stand Alone & Sound Active
Prism Wheel: 3-Facet or Infinite
Frost Effect (Wash)
Pan/Tilt (8-Bit) + Fine Pan/Tilt (16-Bit)
Metal Gobo size: 27mm (22mm viewable gobo size; thickness: 0.3mm)
The Wizard Extreme is a 250 W discharge light with rapid movement, over 80 color and gobo beams and a shutter for rapid strobe effects.
Extreme output Screaming new reflector captures and throws out the total power of the Wizard Extreme deep into every corner of the night. With at least 20% more reflection the Wizard Extreme is unmatched in its shinning performance.
Extreme focus Improved focus control allows you to home in on the exact image you need to relay. Designed for minimal maintenance, the Wizard Extreme houses a high-output 250-watt discharge lamp with a 2000-hour life that guarantees long-lasting performance.
The Cluster Option A special optional multi-coupler is available to create the meanest centrepiece giving your space a total light and effect bombardment.
Box of Tricks The Wizard Extreme is DMX-intelligent and features a 7-color wheel, a gobo wheel with 13 stunning patterns (3 dichroic glass gobos) and a separate shutter for fast strobing.
Radical new gobodesign Pumping new gobo designs keeps the Wizard Extreme planted firmly in the 21st century scene! Flexing both midair and projection effects, the Wizard Extreme covers every angle of the show like no other.
Extreme lamp adjustment Broadening the Wizard's extraordinary ease of use, the new Wizard Extreme has effortless lamp adjustment located externally, so you need no other tools than the ones you’re born with!
Full Power The Wizard Extreme is powerful enough to fill the largest venues with a dazzling display of effects. A constant swarm of more than 80 color gobo beams creates the biggest explosion of color and light. There’s nothing black about this magic.
Commander The Wizard Extreme offers the best of both worlds: Extreme agility and unprecedented power. The Wizard Extreme is so versatile it can be used in any setting. Clubs, touring events, TV studios and mobile DJs.
Features:
250 W discharge lamp
Long lamp life (3000 hrs)
7 interchangeable colors plus 2 open positions and twinkle effect
13 gobos plus open (3 with dichroic reflectors)
Manual focus
Separate shutter for strobe effect
Rotating and swiveling mirror drum
All major safety approvals CE, ETL and CETL
Rigorously tested for total reliability
DMX, stand alone (music or auto-trig) and master/slave function
Continuous operation - no cool down time needed
12 pre-programmed macros for fast start-up
Physical Length: 552 mm (21.7 in.) Width: 516 mm (20.3 in.) Height: 208 mm (8.2 in.) Weight: 14.5 kg (32.0 lbs.)
Lamp Type: 250 W discharge Fitted as standard: Osram HSD 250/80 Color temperature: 8000 K Average lifetime: 3000 hours Socket: G5.3 Approved alternative lamp(s): Philips MSD 250/2, Osram HSD 250/60, Philips MSD 200
Dynamic Effects Motorized rotating parabolic mirror dish Color wheel: 8 colors + open, full and split color selection, twinkle and shake effects Color/gobo wheel: 12 gobos + open, stepped scroll to full positions or continuous rotation, shake effect Dimmer: 0 - 100% Shutter: 0 - 100% continuous dimming, variable & random strobe & pulse effects, instant open & blackout Motorized mirror drum: 180° pan (swivel) and 360° tilt (continuous rotation)
Optics Manual focus: 2 m (6.6 ft.) - 20 m (65.6 ft.)
Control and Programming Control options: DMX, stand-alone, synchronized (master/slave) DMX channels: 1/8/11 Macro programs selectable via DMX: 12 Stand-alone trigger options: Music trig, auto trig (both selectable via DIP siwtch or via DMX) DMX address setting: DIP switch Stand-alone programming: DIP switch Protocol: USITT DMX512/1990 Receiver: RS-485 Firmware update: Serial upload via DMX link
Construction Housing: Steel and aluminum Color(s): Black Protection rating: IP20
Installation Mounting points: Adjustable bracket, floor stand (accessory) multi-coupler bracket (accessory) Orientation: Any
Connections AC power input: 3-pin IEC male socket DMX data in/out: 3-pin locking XLR
Electrical AC power: User-reconfigurable 100-130/200-240 V nominal, 50/60 Hz (US model) 220-240 V nominal, 50 Hz (EU model) Main fuse: 6.3 AT (US model). 3.15 AT (EU model)
Typical Power and Current 100 V, 50 Hz: 320 W, 3.8 A 100 V, 60 Hz: 310 W, 3.4 A 120 V, 60 Hz: 310 W, 2.7 A 230 V, 50 Hz: 320 W, 1.5 A 250 V, 50 Hz: 310 W, 1.4 A Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Thermal Cooling: Forced air Maximum ambient temperature (Ta max.): 40° C (104° F) Maximum surface temperature, steady state, Ta=40° C: 80° C (176° F) Total heat dissipation (calculated, +/- 10% at 110 V, 60 Hz / 230 V, 50 Hz): 1060 / 1090 BTU/hr.
The MX-10 is a powerful 250 W discharge scanner with 12 replaceable colors, 8 interchangeable indexed-rotating gobos and a 3-facet prism for brilliant effects.
Features:
250 W discharge lamp
Long lamp life (3000 hrs)
12 interchangeable colors plus open
Motorized focus
8 interchangeable indexable rotating gobos plus open
Interchangeable 3-facet rotating prism
Separate shutter for strobe effect
High-speed mirror
All major safety approvals CE, ETL and CETL
Rigorously tested for total reliability
DMX control
Continuous operation - no cool down time needed
8 prism/gobo pre-programmed macros for fast start-up
Physical Length: 735 mm (28.9 in.) Width: 340 mm (13.4 in.) Height: 315 mm (12.4 in.) Weight: 22 kg (48.5 lbs.)
Lamp Type: 250 W discharge Fitted as standard: Philips MSD 250/2 Color temperature: 8500 K Average lifetime: 3000 hours Socket: GY 9.5 Approved alternative lamp(s): Osram HSD 250, Philips MSD 200
Dynamic Effects Color wheel: 12 colors (incl. UV transmitter) + open, full and split positions, random color, continuous rotation Rotating gobo wheel: 8 interchangeable gobos + open, indexing, continuous rotation and shake Prism: Interchangeable 3-facet rotating prism Shutter: 0 - 100% continuous dimming, variable & random strobe & pulse effects, instant open & blackout Focus: Motorized, 2 m (6.6 ft.) to 20 m (65.6 ft.) Pan: 230° Tilt: 75°
Control and Programming Control options: DMX DMX channels: 13 Setting and addressing: Control panel with LED display Macro programs selectable via DMX: 8 Protocol: USITT DMX512/1990 Receiver: Opto-isolated RS-485 Firmware update: Serial upload via DMX link
Photometric Data Beam angle: 18°
Construction Housing: Polyester-reinforced composite Color(s): Black Protection rating: IP20
Gobos Outside diameter: 22.5 mm (0.9 in.) + 0/- 0.3 mm (0.01 in.) Maximum image diameter: 17 mm (0.7 in.) Maximum thickness: 1.8 mm (0.1 in.) Glass type: High-temperature Borofloat or better Glass coating: Dichroic or enhanced aluminum Metal: Aluminum (steel for temporary use only)
Installation Orientation: Any Mounting points: Floor or adjustable mounting bracket
Connections Data connection: 3-pin locking XLR Power cable entry: 3-pin IEC
Electrical AC power: Switch-selectable 100-120/208-240 V nominal, 50/60 Hz Main fuse: 6.3 AT (slow blow)
Typical Power and Current 100 V, 60 Hz: 340 W, 4.1 A 120 V, 60 Hz: 340 W, 2.9 A 208 V, 60 Hz: 340 W, 1.8 A 230 V, 50 Hz: 360 W, 1.8 A 240 V, 50 Hz: 350 W, 1.6 A Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Thermal Maximum ambient temperature (Ta max.): 40° C (104° F) Maximum surface temperature, steady state, Ta=40° C: 50° C (122° F) Typical heat dissipation (calculated): 1230 BTU/hr.
The MX-10 is a powerful 250 W discharge scanner with 12 replaceable colors, 8 interchangeable indexed-rotating gobos and a 3-facet prism for brilliant effects.
Extreme output The latest in Martin’s popular MX series, this high-octane performer wields unrivalled brightness in a 250-watt package. A complete optical redesign achieves superb picture quality along with maximum optical efficiency. A multi-layer dichroic reflector minimizes thermal stress and delivers a beautifully even beam with smooth color distribution.
Smooth fast performance The MX-10 breaks new ground in speed and smoothness. Advanced new motor technology has resulted in improved, faster movements across all functions: pan and tilt, color and gobo rotation, prism and shutters.
Graphical effects To provide you with an unlimited source of effects, MX-10 houses 12 replaceable colors with split color possibilities, 8 rotating gobo patterns, and a rotating, 3-facet prism for more creative effects.
Endless adaptability For added flexibility, prisms, gobos and colors are all replaceable, so that MX-10 can be tailored to a wide variety of environments.
Easy maintenance and low noise formula A combination of mechanical and design factors coincide to reduce noise emission to the comfortable levels demanded by theatres and studios. Easy access to lamp and parts make MX-10 fast to clean and service. Features:
250 W discharge lamp
Long lamp life (3000 hrs)
12 interchangeable colors plus open
Motorized focus
8 interchangeable indexable rotating gobos plus open
Interchangeable 3-facet rotating prism
Separate shutter for strobe effect
High-speed mirror
All major safety approvals CE, ETL and CETL
Rigorously tested for total reliability
DMX control
Continuous operation - no cool down time needed
8 prism/gobo pre-programmed macros for fast start-up
Physical Length: 735 mm (28.9 in.) Width: 340 mm (13.4 in.) Height: 315 mm (12.4 in.) Weight: 22 kg (48.5 lbs.)
Lamp Type: 250 W discharge Fitted as standard: Philips MSD 250/2 Color temperature: 8500 K Average lifetime: 3000 hours Socket: GY 9.5 Approved alternative lamp(s): Osram HSD 250, Philips MSD 200
Dynamic Effects Color wheel: 12 colors (incl. UV transmitter) + open, full and split positions, random color, continuous rotation Rotating gobo wheel: 8 interchangeable gobos + open, indexing, continuous rotation and shake Prism: Interchangeable 3-facet rotating prism Shutter: 0 - 100% continuous dimming, variable & random strobe & pulse effects, instant open & blackout Focus: Motorized, 2 m (6.6 ft.) to 20 m (65.6 ft.) Pan: 230° Tilt: 75°
Control and Programming Control options: DMX DMX channels: 13 Setting and addressing: Control panel with LED display Macro programs selectable via DMX: 8 Protocol: USITT DMX512/1990 Receiver: Opto-isolated RS-485 Firmware update: Serial upload via DMX link
Photometric Data Beam angle: 18°
Construction Housing: Polyester-reinforced composite Color(s): Black Protection rating: IP20
Gobos Outside diameter: 22.5 mm (0.9 in.) + 0/- 0.3 mm (0.01 in.) Maximum image diameter: 17 mm (0.7 in.) Maximum thickness: 1.8 mm (0.1 in.) Glass type: High-temperature Borofloat or better Glass coating: Dichroic or enhanced aluminum Metal: Aluminum (steel for temporary use only)
Installation Orientation: Any Mounting points: Floor or adjustable mounting bracket
Connections Data connection: 3-pin locking XLR Power cable entry: 3-pin IEC
Electrical AC power: Switch-selectable 100-120/208-240 V nominal, 50/60 Hz Main fuse: 6.3 AT (slow blow)
Typical Power and Current 100 V, 60 Hz: 340 W, 4.1 A 120 V, 60 Hz: 340 W, 2.9 A 208 V, 60 Hz: 340 W, 1.8 A 230 V, 50 Hz: 360 W, 1.8 A 240 V, 50 Hz: 350 W, 1.6 A Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Thermal Maximum ambient temperature (Ta max.): 40° C (104° F) Maximum surface temperature, steady state, Ta=40° C: 50° C (122° F) Typical heat dissipation (calculated): 1230 BTU/hr.