Sort By: Name | Price
NOTE: Transmitter and Receiver are sold separately. At least one of each is needed to make the system work.
Martin USB Duo DMX
The Martin USB Duo DMX Interface features XLR 5P female connectors and provides two DMX 512 universes from any USB enabled Windows-based PC. It communicates with Martin LightJockey (with Martin One-Key), the Maxxyz and M1 controller series, the Maxedia media server series, and Martin ShowDesigner 5 (MSD5), as well as Martin fixture software uploaders (not compatible with MUM software).The interface is configurable in terms of in/out and is perfect to link up with other Martin controller items such as the M1, Maxxyz, MaxModule, M-PC, MSD, and Maxedia.When used with the M-PC Demo, the USB Duo DMX Interface will unlock up to two DMX universes at no charge without the need for a dedicated M-PC license dongle. With an activated M-PC Basic and M-PC Pro, Multiple USB Duo DMX Interfaces can be connected to achieve more DMX outputs. .With the Martin LightJockey II One-Key License, up to three USB Duo DMX Interfaces can be connected for a total of 2048 DMX channels or 2048 out and 512 in.Note: LightJockey II DMX output will only be activated if the One-Key LightJockey license is present. This means the USB Duo DMX Interface on its own will not activate LightJockey DMX output.As part of the Martin plug-and-play concept, it comes complete with USB cable and installation notes and software.This new hardware interface has been rigorously tested and lives up to Martin’s high quality standards.Features:
Martin DMX 5.3 Splitter
The Martin DMX 5.3 Splitter is the most economical protection for DMX controllers and devices. The main purpose of the Martin 5.3 Splitter is to maintain proper data over long or several runs of DMX signal. The Splitter boosts the weak DMX signal to its original output level before it becomes too low to be read from DMX devices. Disruption of DMX is often caused by bad cables or bad connections. The Martin DMX 5.3 Splitter will help to rectify the signal.Through fully individual isolated input and 5 outputs, the Martin DMX 5.3 Splitter will protect your DMX controller and DMX fixture against voltage surge on the data line. Ground loops are common in complex lighting setups and such problems can create errors in the DMX data. The Martin 5.3 Splitter will help to prevent such situations.Another common issue with DMX communication is reflection caused by long lines, too many connections, or too many devices on the same line, etc. The Martin DMX 5.3 Splitter will prevent such reflection by dividing the load over several outputs and therefore making shorter lines with less connections and devices.Data monitoringWhile the DMX signal runs through the Martin 5.3 Splitter, a microprocessor decodes and monitors the signal. If an error is detected on the DMX line, the Splitter will illuminate an error LED.Features:
Martin RDM 5.5 Splitter
The Martin RDM 5.5 Splitter is the perfect companion to any controller or DMX/RDM device. The main purpose of the Martin 5.5 Splitter is to maintain proper data over long or several runs of DMX signal. The Splitter boosts the weak DMX signal to its original output level before it becomes too low to be read by DMX devices. Disruption of DMX is often caused by bad cables or bad connections. The Martin RDM 5.5 Splitter will help to rectify the signal.Through fully individual isolated input and 5 outputs, the Martin RDM 5.5 Splitter will protect your DMX controller and DMX fixture against voltage surge on the data line. Ground loops are common in complex lighting setups and such problems can create errors in the DMX data. The Martin 5.5 Splitter will help to prevent such situations.Another common issue with DMX communication is reflection caused by long lines, too many connections, or too many devices on the same line, etc. The Martin RDM 5.5 Splitter will prevent such reflection by dividing the load over several outputs and therefore making shorter lines with less connections and devices.Data monitoringWhile the DMX signal runs through the Martin 5.5 Splitter, a microprocessor decodes and monitors the signal. If an error is detected on the DMX line, the splitter will illuminate an error LED.RDM DataRDM (Remote Device Management) is the newly adopted standard in DMX transmission. RDM is a protocol that allows bidirectional communication between RDM capable fixtures and controllers. Most DMX splitters will not allow such data traffic to be processed.One of the unique features of the Martin RDM 5.5 Splitter is its ability to transmit RDM data either way on the DMX line. A built-in microprocessor takes care of managing this information in a very efficient way by avoiding data collisions and increasing the discover time of RDM devices on the links.Features:
3-channel: RGB control3-channel: HSV control4-channel: RGB, dimmer5-channel: RGB, dimmer, strobe6-channel: RGB control of both sides of array10-channel: RGB, ID addressing, dimmer, strobe, macro, auto/custom, dimmer curve, auto speed
0 Item
