• Frequency Response: 4 kHz to 27 kHz
• Average Sensitivity: 94 dB 1 Watt / 1 meter
• Maximum Power Handling Capacity: 75 W (EIA RS426)(8 Ohm system reference)
• Maximum Voltage: 15 v rms continuous 35 v rms intermittent
• Maximum Temperature: 80ºC
• Typical Impedance: Appears as a .13 µF capacitor
• Overall Dimensions 3.34 x 3.34 x 2.69 (H x W x D)
• Weight Unpacked: 0.15 lb(0.067 kg)
• Weight Packed: 0.15 lb(0.067 kg)
• Width Packed: 3.25"(8.255 cm)
• Height Packed: 3.25"(8.255 cm)
• Depth Packed: 2.75"(6.985 cm)

COMP-4D-MX

Titanium Diaphragm for Comp-4-MX

• Replacement diaphragm kit for 14XT™driver
• Weight Unpacked: 0.13 lb(0.06 kg)
• Weight Packed: 0.21 lb(0.095 kg)
• Width Packed: 3.75"(9.525 cm)
• Height Packed: 4.25"(10.795 cm)
• Depth Packed: 1.5"(3.81 cm)

COMP-4D-CL

PETP film Diaphragm for Comp-4CLS and Comp-4CLB

MD20018DIA

Eminence Replacement diaphragm for the MD-2001 driver, 8 Ohms.

Eminence MD2001-8DIA Replacement diaphragm for the MD-2001 driver, 8 Ohms.
Made in the USA

COMP-4MX

1” Exit Titanium Diaphragm Compression Driver

1 inch - Exit Titanium Diaphragm Compression Driver / 1.75 inch Voice Coil - Screw-On Version

MD200116DIA

Eminence Replacement Diaphragm 16 Ohm 1" Throat Size

Eminence MD2001-16DIA Diaphragm 16 Ohm 1" Throat Size

• Replacement diaphragm kit for RX22 driver
• Weight Unpacked: 1.10 lb(0.499 kg)
• Weight Packed: 2.20 lb(1 kg)
• Width Packed: 2"(5.08 cm)
• Height Packed: 4.62"(11.7348 cm)
• Depth Packed: 4.62"(11.7348 cm)

• 1.4"
• Throat Parameter: .938" / 23.8 mm
• Nominal Impedance: 8 Ohms
• Minimum Impedance: 7.1 Ohms
• DC Resistance: 6.8 Ohms
• Power Capacity 1000 Hz to 20,000 Hz: 120 W peak60 W program30 W continuous
• Sensitivity: 104 dB SPL 1 Watt at 1 meterOn-axis on 90º H x 45º V horn
• Nominal Efficiency: 30%
• Frequency Response: 1.5 kHz to 20 kHz
• Recommended Crossover: 1,800 Hz at 12 dB / Octave
• Lowest Recommended Crossover: 2,000 Hz at 12 dB / Octave
• Diaphragm: Commercially pure titanium
• Voice Coil Diameter: 1.4" / 34.4 mm
• Voice Coil Material: Edge-wound ribbon withhigh temp Kapton bobbin
• Flux Density: 11,500 gauss (1.15T)
• Dimensions: 3.54" (90 mm) diameterx 2.40" (61 mm) depth
• Horn Coupling Diameter: .938" (23.8 mm)
• Horn Coupling Threads: Standard 1 3/8" / 18"
• Net Weight: 33.6 oz.
• Shipping Weight: 38 oz.
• Voice Coil Cooling: Ferrofluid
• Weight Unpacked: 2.26 lb(1.024 kg)
• Weight Packed: 2.26 lb(1.024 kg)
• Width Packed: 4.25"(10.795 cm)
• Height Packed: 4.25"(10.795 cm)
• Depth Packed: 3.25"(8.255 cm)

• 1.4"
• Throat Parameter: 1" / 25 mm
• Nominal Impedance: 8 Ohms
• Minimum Impedance: 7.1 Ohms
• DC Resistance: 6.8 Ohms
• Power Capacity 1000 Hz to 20,000 Hz: 100 W peak 50 W program 25 W continuous
• Sensitivity: 102 dB SPL 1 Watt at 1 meter On-axis on 90º H x 45º V horn
• Nominal Efficiency: 30%
• Frequency Response: 1 kHz to 18,000 Hz
• Recommended Crossover: 1,800 Hz at 12 dB / Octave
• Lowest Recommended Crossover: 1,000 Hz at 12 dB / Octave
• Diaphragm: Commercially pure titanium
• Voice Coil Diameter: 1.4" / 35.5 mm
• Voice Coil Material: Edge-wound ribbon with high temp Kapton bobbin
• Flux Density: 11,500 gauss (1.15T)
• Dimensions: 3.500" (91.44 mm) diameter x 2.75" (69.85 mm) depth
• Horn Coupling Diameter: 1.0" (25.4 mm)
• Horn Coupling Threads: Standard 1 3/8" - 18"
• Net Weight: 33.3 oz.
• Shipping Weight: 37 oz.
• Weight Unpacked: 2.05 lb(0.928 kg)
• Weight Packed: 2.16 lb(0.982 kg)
• Width Packed: 3.75"(9.525 cm)
• Height Packed: 3.75"(9.525 cm)
• Depth Packed: 3.25"(8.255 cm)