• Dynamic Cardioid Pickup Pattern
• Low Impedance
• On/Off Switch

• Dynamic Cardioid Pickup Pattern
• Low Impedance
• On/Off Switch

• True Stereo Source Microphone
• Dual Cardioid Polar Patterns
• Extremely Small Profile
• 1/8th-inch TRS-M output for Direct Connect to Portable Recorder
• Requires 1.5-volt DC phantom power to Operate (Power Supply Optional)

• Dynamic Super-Cardioid Pickup Pattern
• Low Impedance
• On/Off Switch

• One Piece Molded Cartridge
• Cardioid Pickup Pattern
• Low Impedance
• On/Off Switch

• High sensitivity, extended smooth, full frequency response and very high SPL capability
• Transformerless design for minimal self-noise and increased dynamic range
• Rugged, turned-brass housing and internal sub-assembly shockmount for maximum reliability
• Requires 48V phantom power

• Room Acoustical Analysis, Audio Test Equipment, Reverberation and EQ Analysis,
• Time Alignment, System Setup & Tuning
• Omnidirectional Condenser Microphone
• Extremely Linear Frequency Response
• Designed for use with Real Time Analyzers, Test Equipment, Audio Analysis Software

• Rugged Secure Headband Assembly
• Flexible Microphone Gooseneck
• Handles High SPL
• Unidirectional Polar Pattern Allows Maximum Gain Before Feedback
• Ideal for Live Vocal, Announcement and Broadcast Applications
• Velcro Support Headband & Mic Windscreen Included

• Proprietary Single Piece Cartridge Design
• Dynamic Cardioid Pickup Pattern
• Switchable High or Low Impedances

• 40 to 15,000 Hz Frequency Response Ideally Suited for Instruments
• Delivers Crisp Sharp Response on Vocals
• Pneumatic shock-mount system cuts down handling noise
• Extremely Durable All Metal Body & Windscreen

• True, symmetric omni-directional pattern, high sensitivity, minimal self-noise, increased dynamic range, high SPL capability, and
• extremely smooth, linear 15Hz to 20KHz frequency response provide extremely precise measurements and transparent recordings
• Perfect for use with real-time analyzers for precise, accurate room acoustics alignments
• Ideal for highly effective, detailed recording of acoustic guitars and vocals
• Rugged construction, gold-plated XLR, and internal assembly shockmount for maximum reliability
• Includes foam windscreen for outdoor applications and mic stand clip (including ⅝" to ⅜" adapter)

• For drum overheads and percussion
• Extremely uniform and tight cardioid polar pattern for ease in mixing
• Extended frequency response for smooth, crisp, ultra-transparent reproduction
• Aluminum housing and gold-plated XLR contacts
• 9-52V phantom powered

• 2x DM-302x microphone
• 2x 15 ft. Mic Cable (XLR - 1/4”)
• 1x protective carrying case

• Low-cut off and –10dB attenuation switches for utmost versatility in all applications
• High sensitivity, extended smooth, full frequency response and very high SPL capability
• Transformerless design for minimal self-noise and increased dynamic range — 20mm electret element
• Rugged, turned-brass housing and internal sub-assembly shockmount for maximum reliability
• Requires 48V phantom power
• Includes mic stand clip and vinyl storage bag

• Ideal for all recording and broadcasting applications
• Features large-diaphragm true condenser design, transformerless low-noise/high-dynamic range output, high SPL capacity, cardioid polar pattern pickup, FET preamps, and rugged internal shock mounts
• Provides the accurate, no-compromise sound reproduction of a high-end studio mic at a fraction of the cost
• Compact and durable, with precision-turned brass housing

• Pencil Condenser
• Hypercardioid and Omnidirectional Polar Patterns

• Cardioid pickup pattern rejects off-axis sound and provides superior gain before feedback
• Frequency response tailored for vocals, with brightened mid-range and bass rolloff to control proximity effect
• Shock-mounted cartridge for exceptional ruggedness and reduced handling noise
• Built-in "pop" filter that reduces explosive breath sounds and wind noise
• Supplied stand adapter and carrying/storage bag
• Legendary Shure quality and ruggedness

• Mounts to drum rims, the edge of acoustic guitar sound holes or the bell of wind instruments for accurate sound reproduction and isolation from other instruments
• Tight cardioid polar response is highly effective in suppressing feedback and unwanted sounds
• Rubber boom shockmount design minimizes vibration and audio transference from resonant instruments or materials
• Sturdy rubber-grip spring clamp holds mic securely and prevents marring of finish
• Built-in windscreen, as well as external windscreen included, for maximum feedback and "pop" rejection
• Adjustable gooseneck and swivel joint allows optimum microphone positioning
• For use with bodypack transmitters or with standard mixers that provide 9-52V

• Cardioid pickup pattern rejects off-axis sound and provides superior gain before feedback
• Frequency response tailored for vocals, with brightened mid-range and bass rolloff to control proximity effect
• Shock-mounted cartridge for exceptional ruggedness and reduced handling noise
• Built-in "pop" filter that reduces explosive breath sounds and wind noise
• Supplied stand adapter and carrying/storage bag
• Legendary Shure quality and ruggedness

• Low Profile Pencil Condenser Microphone
• Black Low Reflective Finish
• Operates with Phantom power or internal battery (Apex191)

• Solid State Medium Diaphragm Condenser Microphone
• Cardioid Polar Pattern
• Internally Mounted -6dB 100Hz Low Frequency Roll Off Switch
• Heavy-Duty Aircraft Grade Machined Brass Body

• Large, pressure-gradient condenser, gold-sputtered diaphragm and FET preamplifier
• Internal shockmount construction for highest structural integrity and rugged reliability
• Selectable attenuation pad and omni or cardioid polar pickup pattern
• Requires 48V phantom power

• Large, pressure-gradient condenser, gold-sputtered diaphragm and FET preamplifier
• Internal shockmount construction for highest structural integrity and rugged reliability
• Cardioid pattern
• Requires 48V phantom power

• Low Profile Pencil Condenser Microphone
• Black Low Reflective Finish
• Operates with Phantom power or internal battery

• Ideal for acoustic guitar, overheads, piano and group vocals
• Condenser design for studio-quality vocal and instrument applications
• Excels in high-SPL applications
• Extended response for smooth, natural sonic characteristics
• Low-mass element for superb transient response
• Corrosion-resistant contacts from gold-plated XLRM-type connector
• Rugged design and construction for reliable performance
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

AT829mW

The Audio-Technica AT829mW is a cardioid lavalier microphone terminated with a mini 1/8" (3.5mm) connector. The microphone is intended for use with A-T PRO-88 body-pack wireless transmitters. The microphone cable measures 55" in length (1.4 m).

• Large gold-diaphragm studio condenser microphone offers pristine sound quality
• Complements a wide range of vocal and instrument applications
• FET preamp with electrically-balanced output for uncompromised tonal quality
• Perfect for all studio applications

• Stereo condenser microphones for iPhone 4, iPod Touch or iPad dock
• connection
• High-quality stereo condenser microphones - same as our
• best-selling DR-series
• recorders
• Microphones adjustable 180 degrees front to back
• Built-in analog to digital converter and microphone preamp for low
• noise recording
• 125dB SPL maximum level for recording loud shows without
• distortion
• Switchable limiter attenuates high-level signals to prevent
• recording overload
• Adjustable input level control
• Powered through iPhone, iPad or iPod Touch dock connector
• USB input allows the iPhone or iPad to be charged from a USB
• connection or
• optional TASCAM PS-P515U
• CD-quality digital recording (44.1kHz/16-bit linear PCM)
• Compact size ideal for mobile use
• Compatible with iPhone 4, iPhone 4S, iPod Touch 4G, iPad, iPad 2

• The unmatched sound of a classic ribbon (velocity) mic — rich, warm and musical
• Perfect for close miking of guitar amps and cabinets, brass instruments, strings, piano, percussion, vocals and orchestral
• ambiance. Unique, compact shape for easy, unobtrusive mic placement anywhere.
• Low-tension 45mm long, 2-micron thick aluminum ribbon design with typical “large, mellow” ribbon audio reproduction
• Smooth, natural extended low and high ends, and detailed, realistic mids
• Unparalleled overall stunning realism with fast, accurate transient response, ultra-high dynamic range and >135 dB SPL capability
• Utmost versatility in dialing in desired sound by varying mic placement. Figure-8 audio directional (pickup) pattern for both front
• and rear side, with extended sweet spots (as compared to large diaphragm condenser mics). Can be used with a second RSM-5 for
• individual recording volume control of 2 separate sources by placing each source in the principal axis of one mic and the off-axis
• null of the other.
• Manufactured with the finest materials — a machined housing with advanced internal shockmount construction for the highest
• structural integrity and rugged reliability
• Supplied with a mic clip and leatherette pouch

• Perfect Live Mic for Use on Toms, Brass and Woodwind Instruments
• Cardioid Polar Pattern Delivers Good Feedback Rejection & Predictable Proximity Response
• Handles Extremely High SPL without Distortion or Capsule Overload
• Integrated ABS Clip with Rubberized Grips Won't Damage Drum Rim or Instrument Bell
• Rubberized Integrated Shockmount Eliminates Vibration Transfer from Microphone Clip
• Reinforced Gooseneck Assembly Holds Mic Position
• Phantom Power Module Included
• Gold Plated Pins on XLR Connectors for Improved Signal Transfer

• Selectable Super Cardioid or Hyper Cardioid Pickup Pattern
• Excellent Off-Axsis Rejection
• Operates with Internal AA Battery or with Phantom Power
• Padded Carry Bag, Deluxe Microphone Clip & Foam Windscreen Included