The DKW-1 R is Nady's unique tower-design VHF wireless receiver included in the DKW1HT handheld wireless mic system and the DKW1LT lavaliere wireless system. A perfect entry level unit, the DKW-1 R features jumbo LED power on, transmitter on and audio peak indicators. And despite its low price, the DKW-1 R offers high-band VHF (170-216 MHz) operation, advanced companding circuitry for a wide dynamic range, and a typical operating range of up to 500+ feet line-of-sight. An ideal replacement or backup unit for systems belonging to auctioneers, teachers, and aerobic instructors.
Available on selected frequencies in the VHF high-band (171-216 MHz) for interference-free, long-range performance
Half-rack receiver design with retractable front panel antennas
Unique snap-out panel locking tabs for optional single receiver rackmounting or dual receiver (side-by-side) rackmounting
RF and AF 5-LED displays for monitoring incoming signal strength and audio level; balanced XLR and unbalanced adjustable ¼” jack output
Noiseless transmitter On/Off switching
Operates up to 15 hours on a single 9V alkaline battery
Locking 3.5mm mini-jack provides secure connection for removable microphone or instrument cable
Easily accessible Input Level Adjust for optimal sound
Choice of three transmitters: WHT, WLT/WGT, or WPM-1V
WHT Handheld Microphone Transmitter:
Operates on a separate single frequency in the VHF 170-216MHz band
Features the Nady DM-10D unidirectional neodymium dynamic cartridge for optimum true sound, maximum feedback rejection and minimal handling noise
Off/Standby/On switch allows convenient audio muting with transmitter on
Low-battery LED indicator flashes once for Unit On; lights steady for low-battery alert
Uses one 9V alkaline battery for 15+ hours operation
WLT/WGT Bodypack Transmitters:
Choice of instrument, Headmic or lapel microphone bodypack transmitter for use with LM-14O omnidirectional or LM-14U unidirectional lapel microphone or Headmic Series microphones
Off/Standby/On switch allows convenient audio muting with the transmitter on
Input level adjust
Locking 3.5mm jack
LED status indicator flashes once for unit on, lights steady for low-battery alert
The Nady Encore 2 R is the full diversity VHF wireless receiver found in both the Encore II LT/U lavaliere and the Encore II HT handheld wireless mic system. Compatible with both the WLT-15 body-pack transmitter (for use with lavaliere or headband mics), or the WHT-15 handheld transmitter, the Encore 2 delivers top quality high band VHF transmission to within 250-500 feet. The Encore 2 features both unbalanced 1/4" and balanced XLR outputs on the back panel, as well as RF signal and audio level indicators on the front. Perfect as a backup unit or for expanding a current system, the Encore 2 is also equipped with snap out panel locking tabs for easy daisy chain-type setups.
The Audio-Technica ATW-R250 VHF Receiver is designed for use with the Audio-Technica FreeWay series wireless systems. The single channel VHF receiver features dual dipole antennas for greater range and minimal RF noise. The receiver also features Power, AF and RF LED indicators on the front panel. The rear panel features a 1/4" phone output jack. Reliable VHF Transmission The ATW-R250 receiver features a VHF dipole antenna system that maximizes range while minimizing interference. 1/4" Phone Output Jack The 1/4" phone output connector is completely compatible with inputs on mixers, amplifiers, etc.
Type of Receiver: ATW-R250 RF Carrier Frequency Range: VHF high band, 169 MHz to 172 MHz Approx. Working Range: 200' (typical) Overall Frequency Response: 80Hz to 13kHz Signal-to-Noise Ratio: 80dB at 10kHz deviation (IEC-weighted), maximum modulation 15 kHz Of Channels: Single Channel (T2 / 169.505 MHz) Type of Output(s): 1/4" Phone Headphone Monitoring: No Power Requirements: 100-240VAC (50/60 Hz) to 12VDC 1A (center positive) switched mode external power supply Battery Type/Approx. Life: No Display: No Mounting Options: Not Specified By Manufacturer Antenna Type: Dual Dipole Dimensions (WxHxD): 7.48 x 1.65 x 5.12" (190 x 42 x 130mm) Weight: 11.0 oz (311 g)
The Audio-Technica ATW-R250 VHF Receiver is designed for use with the Audio-Technica FreeWay series wireless systems. The single channel VHF receiver features dual dipole antennas for greater range and minimal RF noise. The receiver also features Power, AF and RF LED indicators on the front panel. The rear panel features a 1/4" phone output jack.
Reliable VHF Transmission The ATW-R250 receiver features a VHF dipole antenna system that maximizes range while minimizing interference.
1/4" Phone Output Jack The 1/4" phone output connector is completely compatible with inputs on mixers, amplifiers, etc
Type of Receiver: ATW-R250 RF Carrier Frequency Range: VHF high band, 169 MHz to 172 MHz Approx. Working Range: 200' (typical) Overall Frequency Response: 80Hz to 13kHz Signal-to-Noise Ratio: 80dB at 10kHz deviation (IEC-weighted), maximum modulation 15 kHz Of Channels: Single Channel (T8 / 171.905 MHz) Type of Output(s): 1/4" Phone Headphone Monitoring: No Power Requirements: 100-240VAC (50/60 Hz) to 12VDC 1A (center positive) switched mode external power supply Battery Type/Approx. Life: No Display: No Mounting Options: Not Specified By Manufacturer Antenna Type: Dual Dipole Dimensions (WxHxD): 7.48 x 1.65 x 5.12" (190 x 42 x 130mm) Weight: 11.0 oz (311 g)
Audio-Technica's System 8 Wireless Systems with their smooth, contemporary, stackable styling are designed for consistent performance, simple setup and clean, natural sound quality. Available in handheld, headworn, guitar, lavalier and body-pack configurations, these single-channel, fixed-frequency systems are available in three traveling VHF frequencies (169.505, 170.245, and 171.905 MHz).
Other features include advanced dipole antenna systems for extended operational range; Power, RF and AF Peak indicators; a volume control, 1/4-inch output jack and user-adjustable squelch; rugged unidirectional dynamic element on the handheld microphone/transmitter; variable microphone trim control and multi-color battery/power indicator (with AA operation on transmitters); and professional locking connector on the UniPak bodypack transmitter. You can find these and many more Audio Technica Products at Worldmusicsupply.com!
Features:
Easy operation and clear, natural sound quality
Reliable performance and durable construction
Advanced dipole antenna system for extended operating range
Power, RF, and AF Peak indicators
Volume control, 1/4" output jack and user-adjustable squelch
Rugged unidirectional dynamic element on handheld microphone/transmitter
Variable microphone trim control and multi-color battery/power indicator, AA operation on transmitters
Professional locking connector on UniPak body-pack transmitter
Available in 7 system configurations
Receiving System Non-diversity, single-channel, dual antenna system Image Rejection 50 dB minimum RF Sensitivity 20 dBuV at 60 dB S/N ratio (50 ohms termination) Audio Output 1/4" (6.3 mm), unbalanced: 700 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load), nominal Power Supply 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply Dimensions 7.48" (190.0 mm) W x 1.82" (46.2 mm) H x 5.06" (128.5 mm) D Net Weight 11.8 oz (335 grams) Accessory Included Power supply
The Audio-Technica ATW-R250 VHF Receiver is designed for use with the Audio-Technica FreeWay series wireless systems. The single channel VHF receiver features dual dipole antennas for greater range and minimal RF noise. The receiver also features Power, AF and RF LED indicators on the front panel. The rear panel features a 1/4" phone output jack. Reliable VHF Transmission The ATW-R250 receiver features a VHF dipole antenna system that maximizes range while minimizing interference.
1/4" Phone Output Jack The 1/4" phone output connector is completely compatible with inputs on mixers, amplifiers, etc.
Type of Receiver: ATW-R250 RF Carrier Frequency Range: VHF high band, 169 MHz to 172 MHz Approx. Working Range: 200' (typical) Overall Frequency Response: 80Hz to 13kHz Signal-to-Noise Ratio: 80dB at 10kHz deviation (IEC-weighted), maximum modulation 15 kHz Of Channels: Single Channel (T3 / 170.245 MHz) Type of Output(s): 1/4" Phone Headphone Monitoring: No Power Requirements: 100-240VAC (50/60 Hz) to 12VDC 1A (center positive) switched mode external power supply Battery Type/Approx. Life: No Display: No Mounting Options: Not Specified By Manufacturer Antenna Type: Dual Dipole Dimensions (WxHxD): 7.48 x 1.65 x 5.12" (190 x 42 x 130mm) Weight: 11.0 oz (311 g)
The ENCORE DUET R is a half rack VHF wireless 2 channel receiver that Nady includes in its Encore Duet wireless microphone packages. Operating on a 171-216 MHz transmission band, the ENCORE DUET R ensures long range, low interference reception with any two WHT-15 handheld or WLT-15 bodypack transmitters. The ENCORE DUET additionally features balanced XLR outputs on the back panel, as well as RF signal and audio level indicators on the front. A snap out panel with locking tabs is also included for easy daisy chain-type setups
Clear channel UHF operation for optimum interference-free performance in any application or locale
Half-rack receiver design with folding front panel dual antennas
Unique snap-out panel locking tabs for optional single receiver rackmounting or dual receiver (side-by-side) rackmounting
Nady’s proprietary companding circuitry for an industry best 120dB dynamic range, and the clearest, most natural sound available
Tone Squelch for locking out potential interference
UHF-3 receiver with DigiTRU Diversity for maximum range and dropout protection, full LED indicators, ¼” unbalanced and XLR balanced outputs; special circuitry for noiseless transmitter On/Off switching
Choice of two transmitters: UH-3 or UB-3
UH-3 Handheld Microphone Transmitter:
Features the Nady DM-10D unidirectional neodymium dynamic cartridge for optimum true sound, maximum feedback rejection and minimal handling noise
Audio mute switch allows convenient audio muting with the transmitter on
Battery status LED (red) indicator flashes once for Battery OK; lights steady for low-battery alert
TX LED (green) indicator lights steady
Uses two AA alkaline or NiMH batteries
Rugged, all-metal housing
UB-3 Bodypack Transmitter:
Choice of instrument or headworn/lavalier microphone bodypack transmitter
Audio mute switch allows convenient audio muting with the transmitter on
Bi-color LED status indicator: Unit On (green); low-battery alert (orange)
Locking 3.5mm mini-jack provides secure connection for removable microphone or instrument cable
From Audio-Technica, the ATW-T701 receiver is a compact wireless receiver for the 700 series Freeway system. The surface mounted unit features 8 selectable UHF frequencies and diversity switching antennas. The combination of UHF, diversity operation results in fewer drop outs and noise. The rear provides both balanced and unbalanced output connections for further flexibility. User Selectable Frequencies The 700 Freeway system features a user selectable UHF frequencies, up to 8 systems may be used simultaneously. Diversity Operation The ATW-R700 features diversity antenna switching, minimizing noise and drop out. Balanced and Unbalanced Outputs The receiver provides both balanced XLR and unbalanced 1/4" audio output connections.
Type of Receiver: Antenna-switching diversity RF Carrier Frequency Range: UHF band, 542.125 MHz to 561.250 MHz Approx. Working Range: 300 Feet Overall Frequency Response: 100Hz to 12kHz Signal-to-Noise Ratio: >80 dB at 10 kHz deviation (IEC-weighted), maximum deviation 25 kHz Of Channels: 8 Type of Output(s): Balanced: XLRM-type Unbalanced: 1/4" TS ("mono") phone jack Headphone Monitoring: No Power Requirements: 100-240V AC (50/60 Hz) to 12 DC 1 A (center positive) switched mode, external power supply Battery Type/Approx. Life: not applicable Display: Single Digit LED Mounting Options: Table Top Antenna Type: External 1/4 wave Dimensions: 7.48 x 1.65 x 5.12" (190 x 42 x 130mm) (WxHxD) Weight: 12.9 oz (365 g)
Do you love the sound of your trusty wired mics too much to upgrade to a new wireless system? With the PL-2 plug-on wireless transmitter system, you can finally go wireless…and keep your wired mics.
Instead of plugging mic cables to the bottom of your mics, you connect the plug-on transmitters, and the mic signals are sent wirelessly to the included receiver. The system operates in the 2.4GHz range, allowing for digital full-spectrum sound.
There are a total of 18 frequencies available and syncing is simple. The transmitters run on rechargeable batteries and can be used with microphones that require phantom power.
If you have been holding off on going wireless because you love your wired mics, hold off no longer and step into the wireless world with the PL-2.
Features:
18 operating frequencies
Sync features for quick pairing of transmitters and receiver
+48V phantom power compatible with ON/OFF switch
Individuals volume controls on each transmitter
Individual ¼” outputs
Each receiver runs on 2 AA rechargeable batteries (included)
Features 24-bit / 48kHz digital technology for incredibly accurate sound. Quickly and easily provides a clear channel using scan and sync feature. Offers true digital diversity for a rock-solid wireless signal, 900 MHz operation free from TV signal interference, and up to 5 compatible systems per frequency band. 1/4" and XLR audio outputs. X8 band.
Includes PGXD4=-X8, 2 AA batteries, and user guide.
The Shure PGXD4 receiver offers innovative 24-bit, 48 kHz digital audio technology for wireless that sounds like wired. True digital diversity means two antennas and two independent receivers are constantly working to provide rock-solid RF signal, and one touch scan finds a clear frequency instantly, making set up a snap.
Features:
24-bit / 48kHz digital technology for incredibly accurate sound
Automatic frequency selection locates a clear channel instantly
One-touch sync automatically syncs the transmitter and receiver
True digital diversity for rock-solid wireless signal reliability
Up to 5 compatible channels per frequency band
1/4" and XLR audio outputs
Included padded carrying case for portability and protection
Dimensions 40 mm H X 181 mm W X 104 mm D (1.6 x 7.125 x 4.1 in.)
Electro-Voice RE-2-H 1112 Channel Wireless Receiver with detachable 1/4 wave antennas, RF and Audio Meters. WIRELESS MICROPHONES - RE-2 UHF Wireless Series (X in the part number determines frequency band) F.01U.155.823 Features:
Electro-Voice RE-2-RCVR-D 1112 Channel Wireless Receiver with detachable 1/4 wave antennas, RF and Audio Meters. WIRELESS MICROPHONES - RE-2 UHF Wireless Series (X in the part number determines frequency band) F.01U.155.820
Features:
1112 Channel Wireless Receiver with detachable 1/4 wave antennas, RF and Audio Meters
Electro-Voice RE-2-RCVR-E 1112 Channel Wireless Receiver with detachable 1/4 wave antennas, RF and Audio Meters. WIRELESS MICROPHONES - RE-2 UHF Wireless Series (X in the part number determines frequency band) F.01U.155.822 Features:
1112 Channel Wireless Receiver with detachable 1/4 wave antennas, RF and Audio Meters
The Audio-Technica ATW-R2100a Wireless Microphone Receiver is intended for use with the Audio-Technica 2000 Series wireless microphone systems. The receiver features UHF diversity reception, 10 user selectable frequencies, automatic frequency scan and Tone Lock squelch system for interference free reception. Balanced XLR and 1/4" phone connections adapt to professional and consumer gear, and a bright LCD display delivers a comprehensive read over settings in dimly lit conditions. Features:
Serious advances in affordable professional wireless
Clear sound quality and rock-solid, dependable performance
Automatic frequency scanning
10 compatible user-switchable channels in one of two UHF frequency ranges
Antenna power available for powered antennas & other in-line RF devices
True Diversity operation selects the better signal from the two receiver sections, reducing dropouts
Tone Lock tone squelch system fights interference
Rugged metal half-rack receiver with soft-touch controls and LCD display
Balanced XLR and unbalanced 1/4" output jacks enable use with a wide variety of audio gear
Switchable transmitter power output with high and low settings offered
Includes rack-mount kit and detachable UHF antennas
Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver
Type of Receiver: ATW-R2100a UHF Diversity Half-Rack Mount Type of Outputs: Balanced: XLR-male Unbalanced: 1/4" Phone Headphone Monitoring: No Power Requirements: 12-18VDC, 500mA Battery Type/Approx. Life: AC Power Only Display: Back-lit LCD Mounting Options: Rack-Mount Adapters (Included) Antenna Type: BNC-type, 50 ohms Bias voltage 12VDC, 60mA, each Base Dimensions (WxHxD): 8.27 x 1.73 x 6.39" (210 x 44 x 162.2mm) Weight: 2.20 lbs (1.0kg)
The Audio-Technica ATW-R2100a Wireless Microphone Receiver is intended for use with the Audio-Technica 2000 Series wireless microphone systems. The receiver features UHF diversity reception, 10 user selectable frequencies, automatic frequency scan and Tone Lock squelch system for interference free reception. Balanced XLR and 1/4" phone connections adapt to professional and consumer gear, and a bright LCD display delivers a comprehensive read over settings in dimly lit conditions.
Features:
Serious advances in affordable professional wireless
Clear sound quality and rock-solid, dependable performance
Automatic frequency scanning
10 compatible user-switchable channels in one of two UHF frequency ranges
Antenna power available for powered antennas & other in-line RF devices
True Diversity operation selects the better signal from the two receiver sections, reducing dropouts
Tone Lock tone squelch system fights interference
Rugged metal half-rack receiver with soft-touch controls and LCD display
Balanced XLR and unbalanced 1/4" output jacks enable use with a wide variety of audio gear
Switchable transmitter power output with high and low settings offered
Includes rack-mount kit and detachable UHF antennas
Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver
Type of Receiver: ATW-R2100a UHF Diversity Half-Rack Mount Type of Outputs: Balanced: XLR-male Unbalanced: 1/4" Phone Headphone Monitoring: No Power Requirements: 12-18VDC, 500mA Battery Type/Approx. Life: AC Power Only Display: Back-lit LCD Mounting Options: Rack-Mount Adapters (Included) Antenna Type: BNC-type, 50 ohms Bias voltage 12VDC, 60mA, each Base Dimensions (WxHxD): 8.27 x 1.73 x 6.39" (210 x 44 x 162.2mm) Weight: 2.20 lbs (1.0kg)
Wireless Receiver with Detachable 1/4 Wave Antennas, RF and Audio Meters and All Rack Mount Hardware The RE-2 Series Wireless Microphone System brings sophisticated professional features to an affordable price point. The RE-2 is a completely programmable frequency agile system with one-touch Auto-Clear - Scan, operates over 28MHz (6 TV channels), XLR Mic or Line level output and many other features. The RE-2 PRO receiver includes all of the rack mount hardware you will need to install one or two units with front mount antennas. - Hz, 40 k - Hz deviation): Diversity: Digital Posi-Phase True Diversity Dynamic Range: greater than 100 d - B FCC Type Acceptance: Approved under Part 15 Number of channels: 1112 possible (programmable in 25k - Hz steps) per band Squelch: Tone Code plus Amplitude Case Material Features:
1112 Channel Wireless Receiver
detachable 1/4 wave antennas, RF and Audio Meters and all rack mount hardware
Electro-Voice RE-2PRO-RCVR-D 1112 Channel Wireless Receiver with detachable 1/4 wave antennas, RF and Audio Meters and all rack mount hardware. WIRELESS MICROPHONES - RE-2PRO UHF Wireless Series (X in the part number determines frequency band) F.01U.118.399 Features:
RCVR-D, 1112 Channel Wireless Receiver
detachable 1/4 wave antennas, RF and Audio Meters and all rack mount hardware
The Audio-Technica M2R Wireless Receiver is intended for use with the Audio-Technica Wireless In-Ear Monitoring System. The transmitter features XLR & 1/4" phone combi-connector inputs and XLR loop-through outputs to feed an audio console. There are 100 selectable frequencies, and up to 10 systems can operate simultaneously on each band. An easy to read graphic LED display on the transmitter provides all necessary information, and defeatable limiter eliminates sudden peaks in audio signal.
Features:
High-fidelity sound with clean, articulate mix allows you to hear yourself better at lower volume
100 selectable UHF channels
Up to 10 simultaneous systems per frequency band
Three receiver modes: Personal Mix, stereo, and mono
Personal Mix Control allows volume and mix control of two independent signals at the receiver
RF Carrier Frequency Range: Band L: 575.000 to 608.000 MHz Selectable Channels: 100 Compatible Channels: 10 Operating Range: 100m (300'), typical Frequency Response: 60Hz to 13kHz (+/- 3 dB) Signal-to-Noise Ratio: Not Specified By Manufacturer Channel Separation: 25kHz RF Output Power: 10 mW/30 mW (switchable internally), 50 ohms Limited to 10 mW within 863 MHz to 865 MHz Frequency Selection: Not Specified By Manufacturer Frequency Indicators: LED Antenna: Antenna Input: SMA-type, 50 ohms Audio Input Connectors: XLRF-type/6.3mm stereo (1/4") combination connector Nominal Input Level: XLRF-type/6.3mm stereo, (1/4") balanced: +26dBu 6.3mm (1/4") mono, unbalanced: +26dBu Maximum Input Level: Not Specified By Manufacturer Input Pad Switch: No Phantom Power Protection: No Loop In/Out Connectors: XLR Loop-Through Limiting: Defeatable Limiter Power Requirements: 12-18V DC, 600 mA Weight: 870 g (30.7 oz), without accessories Dimensions: 8.30 x 5.20 x 1.70" (210 x 132 x 44mm)
The Audio-Technica M2R Wireless In-Ear Receiver is designed to be used with the M2 Wireless In-Ear Monitoring System. Talent can create their own personal monitoring mixes using the intuitive controls on the M2R.
There is a 3.5mm mini output for the headphones (not included) and the M2R is powered on just 2 AA batteries. There are 100 selectable frequencies, and up to 10 systems can operate simultaneously on each band.
Features:
High-fidelity sound with clean, articulate mix allows you to hear yourself better at lower volume
100 selectable UHF channels
Up to 10 simultaneous systems per frequency band
Three receiver modes: Personal Mix, stereo, and mono
Personal Mix Control allows volume and mix control of 2 independent signals at the receiver
RF Carrier Frequency Range: Band M: 614.000 to 647.000MHz Selectable Channels: 100 Compatible Channels: 10 Operating Range: 300' (100 m), typical Frequency Response: 60Hz - 13kHz (±3dB) Signal-to-Noise Ratio: Not Specified by Manufacturer Channel Separation: 25kHz RF Output Power: 10/30mW (switchable internally), 50 Ohms Limited to 10mW within 863-865MHz Frequency Selection: Not Specified by Manufacturer Frequency Indicators: LED Antenna: Antenna Input: SMA-type, 50 Ohms Input Pad Switch: No Phantom Power Protection: No Limiting: Defeatable Limiter Power Requirements: 2 x AA Batteries Dimensions (HxWxD): 2.76 x 0.98 x 4.33" (70 x 25 x 110mm) Weight: 30.7 oz (870g), without accessories
UHF Synthesized Wireless Mic Receiver The FMR-500 brings professional features and performance to the small and medium sized wireless microphone installs that are so popular today. One touch Auto ClearScan selects the clearest channel in the clearest group of compatible channels in just seconds with the push of one button.
Telex FMR-500 Wireless Systems Optimized channel frequencies allow up to 20 systems to operate simultaneously by combining channels from three available bands, or up to 10 within one band. 1122-Channel Frequency Agile system with Clearscan auto channel selection allows quick setup, transmitter matching, and new channel selection if RF conditions change. Handheld transmitter includes Electo-Voice N/DYM 767a dynamic microphone element or RE410 Condenser element. Digital Posi-Phase Diversity receiver technology provides clear, drop-out free audio. Front panel Battery Level, RF and audio meters with XLR Balanced Mic or Adjustable Line Level output plus 1/4" Unbalanced Line output on back panel. Rack mount hardware included.
FMR-500 UHF Wireless Microphone System The FMR-500 brings professional features and performance to the small and medium sized wireless microphone installs that are so popular today. One touch Auto ClearScan selects the clearest channel in the clearest group of compatible channels in just seconds with the push of one button. The new HT-500 programmable handheld microphone transmitter is the smallest Telex has ever built and it has a screw-on battery cover that also hides the controls, and an LCD display. Choose the EV N/D 767a dynamic microphone or the EV RE410 condenser microphone for high quality vocal performance. The WT-500 bodypack transmitter features a cell phone style beltclip, dual latching battery door, and a TA4 connector with a wide variety of lapel and headworn microphone options. The combination of sound and RF features are hard to beat at twice the price. Features: Up to 10 systems can operate simultaneously from the pre-set groups of channels in one operating band. Groups of 16 coordinated channels between the two bands are also pre-set. Advanced ClearScanTand one touch Auto ClearScan automatic group and channel selections, for quick and easy system setup. Completely programmable in 25kHz steps across 28MHz for 1112 possible frequencies Backlit receiver LCD display shows the Group/Channel, Frequency, transmitter battery status, diversity operation, and RF and Audio level meters. Balanced XLR audio output for Microphone or Line level signals and a 1/4 inch line level jack to match any application. Fourth generation Posi-PhaseTdiversity and advanced audio circuits provide maximum range and professional sound quality. "Smart" battery circuit means there is no way to put the battery in wrong. Tone Code plus Amplitude squelch with one button on/off.
This stereo bodypack receiver is part of the M3M Wireless In-Ear Monitoring System. Any number of units can be operated on the same frequency with a single M3T stereo transmitter. It offers Personal Mix Control, which allows you to adjust your own mix on stage, and features a backlit LCD display so you can set your own preferences.
Receiving System: Double conversion superheterodyne RF Sensitivity: 20 dBuV (at 60 dB S/N ratio, 50 ohms termination) Headphone Output Connector: 3.5 mm TRS stereo phone jack Headphone Output Power: 65 mW (at 32 ohms) Antenna Input: SMA-type, 50 ohms Aux Input Connector: 3.5 mm TRS stereo phone jack Batteries: 2 x 1.5V AA (not included) Battery Life: 8 hours (alkaline) depending on battery type and use pattern Dimensions (WxHxD): 2.76" x 0.98"D x 4.33" Net Weight: 4.7 oz., without batteries Accessories Included: EP3 Earphone, flexible antenna
The Audio-Technica ATW-R1810 is a single channel diversity receiver for the 1800 series wireless microphone system. The receiver features True Diversity UHF receivers with an internal Antenna/Splitter amplifier. The compact ATW-R1810 is powered with 6 AA batteries, one of the internal receivers may be turned off to preserve battery life.
Balanced Output The receiver features a balanced audio output. Frequency Agile/Auto Scanning The 1800 series wireless systems feature up to 996 Auto-Scanning frequencies and simultaneous operation of up to 10 systems. True Diversity Each receiver features true diversity operation for minimal drop out and radio frequency noise. True Diversity Operation Each receiver features true diversity operation for minimal drop out and radio frequency noise.
Independent Receiver Shut Off One of the dual internal receivers may be shut off in order to preserve battery life.
Receiver: Type of Receiver: Dual independent RF sections, automatic-switching diversity Type of Outputs: 3-pin Mini XLR (TA3) Headphone Monitoring: 3.5mm TRS, signals on both Tip and Ring Power Requirements: 12V DC nominal, 500mA Battery Type/Approx. Life: 4x 1.5V AA alkaline (not included) Dual-channel Operation: 6 hours typical Single-channel Operation: 10 hours typical Display: LCD frequency and battery status display with back-light Antenna and AF Peak LED indicators Mounting Options: No Antenna Type: Dual BNC Dimensions (WxHxD): 2.95 x 4.92 x 1.25" (75 x 125 x 32mm) Weight: 10.5 oz (300 g)
Bodypack Receiver for M3L Wirelesss In-Ear Monitor System
This stereo bodypack receiver is part of the M3L Wireless In-Ear Monitoring System. Any number of units can be operated on the same frequency with a single M3T stereo transmitter. It offers Personal Mix Control, which allows you to adjust your own mix on stage, and features a backlit LCD display so you can set your own preferences.
Receiver Specifications: Receiving System: Double conversion superheterodyne RF Sensitivity: 20 dBuV (at 60 dB S/N ratio, 50 ohms termination) Headphone Output Connector: 3.5 mm TRS stereo phone jack Headphone Output Power: 65 mW (at 32 ohms) Antenna Input: SMA-type, 50 ohms Aux Input Connector: 3.5 mm TRS stereo phone jack Batteries: 2 x 1.5V AA (not included) Battery Life: 8 hours (alkaline) depending on battery type and use pattern Dimensions (WxHxD): 2.76" x 0.98"D x 4.33" Net Weight: 4.7 oz., without batteries Accessories Included: EP3 Earphone, flexible antenna
The Audio-Technica ATW-R1810 is a single channel diversity receiver for the 1800 series wireless microphone system. The receiver features True Diversity UHF receivers with an internal Antenna/Splitter amplifier. The compact ATW-R1810 is powered with 4 AA batteries, one of the internal receivers may be turned off to preserve battery life.
Balanced Output The receiver features a balanced audio output. Frequency Agile/Auto Scanning The 1800 series wireless systems feature up to 996 Auto-Scanning frequencies and simultaneous operation of up to 10 systems.
True Diversity Operation Each receiver features true diversity operation for minimal drop out and radio frequency noise. Independent Receiver Shut Off One of the dual internal receivers may be shut off in order to preserve battery life.
Receiver: Type of Receiver: Dual independent RF sections, automatic-switching diversity Type of Outputs: 3-pin Mini XLR (TA3) Headphone Monitoring: 3.5mm TRS, signals on both Tip and Ring Power Requirements: 12V DC nominal, 500mA Battery Type/Approx. Life: 4x 1.5V AA alkaline (not included) Dual-channel Operation: 6 hours typical Single-channel Operation: 10 hours typical Display: LCD frequency and battery status display with back-light Antenna and AF Peak LED indicators Mounting Options: No Antenna Type: Dual BNC Dimensions (WxHxD): 2.95 x 4.92 x 1.25" (75 x 125 x 32mm) Weight: 10.5 oz (300 g)