2 LOCATIONS TO SERVE YOU
WARREN, MI
(586) 582-0871 		GARDEN CITY, MI
(734) 427-7177
Online Sales: (800) 357-8991
Welcome Guest
LiveZilla Live Help

Pro AudioBrands

Drums & Percussion
Gooseneck Lights
Guitars & Bass
Headphones
Microphones
PA Mixers
PA Packages
PA Racks, Cases & Bags
Power Amplifiers
Power Conditioners
Signal Processors
Speakers & Subwoofers
Specials
Stands

Recently Viewed Categories

Power Conditioners

Sort By: Name | Price
E-398_Thumb.jpg

E-398
$2.00
Compare
Furman
E-398

Rack Mount System

The Furman E-398 is the perfect low cost AC power solution for many rack mount systems, featuring a 15 amp load, and 9 outlets.
ZB-GNL_Thumb.jpg

ZB-GNL
$2.05
Compare
American Audio
ZB-GNL

  • ZB-GNL , Gooseneck Light allows you to perform in dimly lit areas
  • 14-inch flexible gooseneck fits the American DJ XDM-242, XDM-352 & the XDM-3633”Commander
  • Comes with one lamp
  • Connection: 12V DC BNC
PC-4_Thumb.jpg

PC-4
$14.99
Compare
American DJ
PC-4

4 Channels A/C Power Center designed to eliminate messy cables. 4 Lighted power switches on the front panel control 4 A/C 3-prong outlet on the rear panel. Ideal for switching lighting and sound equipment on and off. 15 amps/1800 watts maximum draw. Built-In 15 amp circuit breaker.
E-107_Thumb.jpg

PL-07
$20.99
Compare
Eliminator
E-107  - PL-07

The E-107 is a reliable rack mount power center. This unit has 8 light switches that control 8 individual sockets on the rear of the unit. When a power switch is glowing, the power outlet on the rear of the unit that matches the switch will be active. The unit can handle a maximum of 15 amps. A 15-amp breaker on the rear of the unit protects any power surges or grounding problems you may encounter.
PC08_Thumb.jpg

PC08
$29.99
Compare
Chauvet
Power Panel

The PC-08 and PC-09 features 8 switches that control individual Edison plugs in the rear of the unit that are fused by a 15 amp circuit breaker mounted into the front of the unit. Both units are 19" rack ready, taking up just one rack space, and provide individual switch solutions for smaller effect lights. The PC-08 features a black body with red switches, and the PC-09 features a silver and black body with blue switches.

Features:
  • 8 switches, 15 amps
  • All switches independently controlled and grounded
  • 1 rack space
PC-100A_Thumb.jpg

PC-100A
$29.99
Compare
American DJ
PC-100A

FEATURES:
  • A must for every DJ!
  • A/C power center designed to eliminate extension cords and messy wires
  • 8 lighted switches on front panel
  • 15A resetable circuit breaker on front panel
  • Eight 120V, 3-prong plug sockets on rear of the unit
  • Ideal for switching lights and sound equipment
  • 6 ft. power cord
  • Maximum load: 15 amps or 1800 watts
  • Dimensions: 19" x 2" x 5" - single space rm
  • Weight: 4 lbs.
  • 120V/60Hz operation only
SS-6B_Thumb.jpg

SS-6B
$39.95
Compare
Furman
SS-6B PRO SURGE SUPPRESSOR

Features:
  • 6 outlet block
  • Heavy duty metal construction
  • 15 foot power cord
  • Illuminated ON/OFF switch
  • Circuit breaker
  • EMI/RFI noise attenuation
RRM-1-PRES_Thumb.jpg

RRM-1 PRES
$39.95
Compare
Furman
RRM-1 PRES

The Furman RRM-1 PRES is the perfect low cost AC power solution for many rack mount systems, featuring a 15 amp load, and 9 outlets.
PB4X4_Thumb.jpg

PB4X4
$49.00
Compare
ART
PB4X4

Power Distribution System

PB 4x4 features ART's "4x4" distribution on the back of the unit -- four of the eight rear outputs are 1.25 inches apart. This allows the user to plug in wide power cables and multiple wall wart devices, and still have eight total power outlets to choose from.

Built into the PB 4x4 is a Surge and Spike Protection System, designed to protect powered equipment from harmful electric surges and spikes. The unit also has RFI and EMI filtering.

The PB 4x4 also features a front-located on/off power switch (which lights up when turned on), and a front-mounted circuit breaker reset switch. The unit has a total power capacity of 1800 watts, and has a front-mounted, 15 amp circuit breaker.

The rugged, all-steel chassis occupies 1U rack spaces and is intended for installation into standard 19" equipment racks. Applications for the PB 4x4 include Live Sound Systems/PA, Permanent or Fixed Installations, Church, Club and Practice PA Systems, DJ Sound Systems, Home and Project Recording Systems, and Monitor Systems.

The PB 4x4 features a one-year warranty.
D10-PFP_Thumb.jpg

D10-PFP
$49.00
Compare
Furman
Power Distributor

The D10-PFP is a sturdy, rack-mountable power distributor. Featuring 10 rear panel outlets with circuit breaker, it offers a convenient way to power a rack full of equipment up to a 15 amp load.

The sturdy, all steel construction and heavy-duty 6 foot (14 AWG) three conductor cord provide ultimate durability and longevity.

Note that the D10-PFP is a power distributor only, and offers no surge protection or conditioning functions, making it an ideal extension to an existing branch circuit.

Features:
  • 10 rear panel outlets for your equipment
  • Sturdy one rack space design
  • Heavy duty 6 foot, 14 AWG Cord
  • Circuit breaker protected
  • Rated 15 amps
  • All steel construction
PLUGLOCK-PFP_Thumb.jpg

PLUGLOCK-PFP
$49.95
Compare
Furman
PlugLock-PFP
Circuit-Breaker Protected Locking Outlet Strip

The PLUGLOCK-PFP circuit-breaker protected locking outlet strip provides enough wall wart spacing for five bulky transformers and can be safely mounted out of sight, in the rear of your rack.

Secure clamping design "locks" your transformers and conventional plugs in place, ensuring you never get disconnected from your power source. Adjustable clamps accommodate transformers and plugs from 0.4" to 2.1" above outlet.

The sturdy, all steel construction and heavy-duty 5 foot (14 AWG) three conductor cord provide ultimate durability and longevity.

Features:

  • Wall Wart Spacing for Bulky Transformers
  • Clamps Securely Lock Wall Warts in Place
  • Clamps Secure Regular Plugs As Well
  • Mounts Safely Out of Sight in Rear of Rack
  • Heavy Duty 5 Foot, 14 AWG Cord
  • Circuit-breaker Protected
  • Rated 15 Amps
  • All Steel Construction
RRM-2-UPS_Thumb.jpg

RRM-2 UPS
$59.95
Compare
Furman

RRM-2 UPS

Furman RRM-2 Rack Mount Ears

Use Furman RRM-2 Rack Mount Ears for rack mounting your AR-1220/1230/2330/2330D, AR-PRO, and IT-1210/1220/1230 units.

  • Use genuine Furman parts and accessories
PST-2+6_Thumb.jpg

PST-2+6
$60.00
Compare
Furman
PST-2+6
POWER STATION SERIES

For over 30 years, Furman has pioneered the development of AC power products for the most demanding audio, video, and broadcast professionals. With Furman’s Power Station Series, everyone can reap the benefits of unrivaled power purification and unequalled surge protection.

Features:
  • Advanced surge suppression with zero ground contamination
  • Offers superior protection over a standard power strip
  • Cable satellite and Telco connectors deliver advanced protection
  • Audible alarm indicates excessive power surge
  • Compact design enables discrete placement
M-8x2_Thumb.jpg

M-8x2
$64.95
Compare
Furman
Power Conditioner
A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-8x2 in to the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load. The M-8x2 is designed for applications where lights are not required.

Features:
  • Noise Filtration: AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)
  • Surge Protection: Spike & surge protection ensures equipment stays safe and your power stays clean
  • 9 Total Outlets: 8 rear panel outlets and 1 front panel outlet
  • 15 Amp Rating: 15 amp rating, with circuit breaker
  • "Protection OK" Indicator: Front panel indicator LED lets you know that your equipment is being protected
  • Wall Wart Spacing Indicator: Rear outlets have been spaced to accommodate even the bulkiest of wall warts and adapters
RRM-2_Thumb.jpg

RRM-2
$69.00
Compare
Furman

RRM-2

Rear Rack Ears for AR-1220 AC Line Voltage Regulator

The RRM-2 from Furman are optional, adjustable rear rack ears for the AR-1220 line voltage regulator, allowing the 35 lb unit to be securely attached both in the front and in the back.
MIW-SURGE_Thumb.jpg

MIW-SURGE
$69.95
Compare
Furman
MIW-SURGE
IN-WALL SURGE PROTECTION SYSTEM

MIW-SURGE delivers safe, protected AC power to flat panel displays, ceiling mounted video projectors and powered sub-woofers. Discreetly hides behind electronic equipment for a neat, clean, code compliant and professional installation.

Features:
  • Provides surge protection
  • Ultra-thin profile can allow equipment to hang less than one inch from the wall
  • Compatible with most standard electrical boxes.
  • Accommodates optional installation solutions by using: Decora Adapter, Pass-Through Insert, Keystone 2-port adapter, MIW Signal Line Modules
    (MIW modules sold separately)
  • CSA Certified for code compliant installations.
  • 3 Year Product Warranty
PDP-850_Thumb.jpg

PDP-850™
$69.99
Compare
American Audio
PDP-850 - Power Distribution Panel

  • Power Distribution panel with seven 3-prong power plugs and pop-up lights for your rack.
  • 7 protected switched A/C grounded outlets on rear of unit, & 1 A/C unswitched outlet on rear of unit
  • 1 A/C outlet switched on front of panel
  • 15A per outlet/20A protection breaker button on front panel
  • Dual L.E.D. pop-out lights with dim control knob
  • USB receptical on front panel
  • Great for lighting up racks
  • Protection: 20A breaker
  • Dimensions: 19" x 1.75" x 6.5" - single space rack mount
  • Weight: 7 lbs. / 3 kgs.
PCL-810_Thumb.jpg

PCL-810
$69.99
Compare
Nady
PCL-810

Power Line Conditioners

Features:
  • Triple mode varistor surge and spike protection
  • Eight rear outlets (with room for four “wall warts”) controlled by front panel switch
  • 15 amp rating (1800W) with rear panel circuit breaker (UL)
  • Two added front panel slide-out, swiveling lights for rack illumination and dimmer controls to adjust lamp brightness
  • Large LED numeric meter that displays incoming AC line voltage
  • Rugged single-rack space metal housing for maximum reliability
PB4X4PRO_Thumb.jpg

PB4X4PRO
$85.00
Compare
ART
PB4X4PRO

Power Distribution System

Presenting the 4x4 PRO SERIES Power Distribution Systems from ART. Built on the foundation of the popular 4x4s, the PRO SERIES are durably constructed, reliable power conditioners for use in many applications. Wherever power management system is required, the 4x4 PRO SERIES provide the surge protection you need to keep your rack safe from unwanted disruption.

All PRO SERIES models have an additional internal discrete module called APF™ (Advanced Power Filtering) which filters out digital and dimmer hash as well as any high frequency noise that is above the audio range. Some off-the-shelf add-on modules saturate and lose their filtering effectiveness as the load increases, but by using a high power discrete design we were able to create a filter that stays effective over the full operating range.

By using both Common Mode and Differential Mode topologies in series for the filter design we are able to block virtually all of the unwanted noise that is between the AC line and ground, and also the two sides of the AC line. This has the additional benefit of reducing ground loop problems in your system. High frequency noise currents in particular are highly attenuated in both directions so that any line noise that could be generated by one of your components is not allowed to get back into your main A.C. wiring so if you use a number of PRO SERIES Power Conditioners in your setup, you can distribute and isolate the noisy components from the sensitive components in your system. Additionally, any signals above 10kHz are filtered from the line with over 40dB of attenuation above 100kHz and beyond.

Every PRO SERIES power conditioner is designed with a power capacity of 1800 Watts, surge/spike protection, APF with EMI & RFI filtering, front-mounted unswitched power outlet and an adjustable rear-mounted gooseneck light source for bright illumination behind the rack. The spacing and alignment of the rear outlets to accommodate various size power plugs and AC adapters.

Features:
  • APF - Advanced Power Filtering
  • Power Capacity of 1800 Watts
  • Surge & Spike Protection
  • EMI & RFI Filtering
  • 8 Rear Outlets with Power Adapter Friendly Positioning
  • One Front-mounted Unswitched Power Outlet
  • Rear Mounted Gooseneck Light Source
PCL-815_Thumb.jpg

PCL-815
$89.99
Compare
Nady
PCL-815

Power Line Conditioners

Features:
  • Triple mode varistor surge and spike protection
  • Eight rear outlets (with room for four “wall warts”) controlled by front panel switch
  • 15 amp rating (1800W) with rear panel circuit breaker (UL)
  • Two added front panel slide-out, swiveling lights for rack illumination and dimmer controls to adjust lamp brightness
  • Large LED numeric meter that displays incoming AC line voltage
  • Two voltage condition indicators — standard voltage and over voltage
  • Rugged single-rack space metal housing for maximum reliability
PST-6_Thumb.jpg

PST-6
$95.00
Compare
Furman
PST-6
POWER STATION SERIES

For over 30 years, Furman has pioneered the development of AC power products for the most demanding audio, video, and broadcast professionals. With Furman’s Power Station Series, everyone can reap the benefits of unrivaled power purification and unequalled surge protection.

Features:
  • Advanced surge suppression with zero ground contamination
  • Offers superior protection over a standard power strip
  • Cable satellite and Telco connectors deliver advanced protection
  • Compact design enables discrete placement
  • Sturdy Aluminium chassis
SP4X4_Thumb.jpg

SP4X4
$99.00
Compare
ART
SP4X4

Metered Power Dist. System

The SP 4x4 features a backlit linear meter to monitor input voltage, which gives the user a familiar analog style readout when monitoring voltage from a power source.

The SP 4x4 also features ART's "4x4" distribution on the back of the unit -- four of the eight rear outputs are 1.25 inches apart. This allows the user to plug in wide power cables and multiple wall wart devices, and still have eight total power outlets to choose from. Built into the SP 4x4 is a surge and spike protection system, designed to protect powered equipment from harmful electric surges and spikes.

The unit also has RFI and EMI filtering, a 15 amp breaker, and a total power capacity of 1800 watts. The SP 4x4 also features a front-located on/off power switch (which lights up when turned on), and a front-mounted circuit breaker reset switch. The rugged, all-steel chassis occupies 1U rack spaces and is intended for installation into standard 19" equipment racks.

Applications for the SP 4x4 include Live Sound Systems/PA, Permanent or Fixed Installations, Church, Club and Practice PA Systems, DJ Sound Systems, Home and Project Recording Systems, and Monitor Systems.

The SP 4x4 features a one-year warranty.
MIW-POWER-PRO-PFP_Thumb.jpg

MIW-POWER-PRO-PFP
$99.95
Compare
Furman
MIW-POWER-PRO-PFP
IN-WALL POWER MANAGEMENT

Two recessed AC receptacles deliver power to remotely located devices. Enlarged faceplate (4.5" x 4.5") accommodates oversized wall cutouts. Line fault LED to indicate an overvoltage condition with the power to the MIW-POWER -PRO-PFP. Power ON LED indicates power is being supplied to the MIW-POWER-PRO-PFP outlets.
MP-20Q_Thumb.jpg

MP-20Q
$99.95
Compare
Furman
Quad Box Power Relay Accessory

The 20-amp MP-20Q provides a pair of remotely-activated, relay-controlled outlets, set up for mounting in any standard electrical quad box, either directly or with a "mud ring" attached. Due to the space limitations of a quad box, the MP-20Q has a smaller feature set than the MP-20.

The MP-20Q has no internal power supply; a maintained 8-15 VDC supply capable of providing 10mA is required to turn on the outlets. This can be supplied by a Furman PowerLink, or an ASD-120.
M-8Lx_Thumb.jpg

M-8Lx
$99.95
Compare
Furman
Power Conditioner
A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-8x in to the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load. The M-8x is designed for applications where lights are not required.

Features:
  • Noise Filtration: AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)
  • Surge Protection: Spike & surge protection ensures equipment stays safe and your power stays clean
  • 9 Total Outlets: 8 rear panel outlets and 1 front panel outlet
  • 15 Amp Rating: 15 amp rating, with circuit breaker
  • "Protection OK" Indicator: Front panel indicator LED lets you know that your equipment is being protected
  • Wall Wart Spacing Indicator: Rear outlets have been spaced to accommodate even the bulkiest of wall warts and adapters
RC8_Thumb.jpg

RC8
$99.95
Compare
Numark
Rack-mount power conditioner. Install the RC-8 in the top of your rack and use the eight switched AC outlets on the rear panel to power all of your equipment, up to a full 15-amp load. The line voltage monitor displays incoming voltage, and the two slide-out, swiveling light fixtures provide illumination of your gear, adjustable via the front-panel dimmer control.

The RC-8 supports 8 grounded AC jacks on its rear panel, activated via a large lit power switch on the front panel. The RC-8 offers superb surge and transient suppression, so all power outputs are clean and noise-free.


The unit features a large front-panel LED display that shows current AC line voltage for informed power management. Also on the front panel, the RC-8 contains two pull-out light bars that have their own separate on/off switch and dimmer-control knob.

Features:
VOLTAGE METER & POWER CONDITIONER
  • The RC-8 protects your delicate electronic equipment with a highvoltage surge and transient suppressor and an RFI/EMI interference filter. The fast-acting suppression circuit responds in less than a nanosecond, clamping transient voltages to safe levels. The filter works to prevent noise from fluorescent lights, certain dimmers, radio transmitters, and similar sources of “electronic pollution” from entering the AC line, and, from there, leaking into sensitive audio, video, or computer circuits.

OUTLETS
  • The RC-8 has eight AC outlets located on its rear panel, controlled by a front panel master switch which glows when the power is on. The circuit breaker-protected outlets are rated at 15 amps, which is equivalent to 1800 watts at 120 volts.

PULL-OUT RACK LIGHTS
  • The RC-8's lamps are easy to pull out and aim. A switch on the left side of the front panel turns them on and off, and the brightness is adjusted by the nearby dimmer control.
PS4X4_Thumb.jpg

PS4X4
$109.00
Compare
ART
PS4X4

Dual Metered Power Distribution System

The PS 4x4 features a backlit linear meter to monitor input voltage, which gives the user a familiar analog style readout when monitoring voltage from a power source. The PS 4x4 has a backlit linear Ammeter showing Load Current in amperes. This additional meter gives an analog "real-world" look at how much power you are using ...hence the term "power station". While the associated voltmeter stays relatively stable and varies slightly with line voltage and house wiring, the ammeter varies much more, as power is consumed. For example, if the unit is in a rack with digital equipment and preamps, it may not vary a lot (even if you had 8 200 watt network computers hooked up, it would show if all are up and running). However, if it is in a rack with one or more power amps, the meter's indicator may be bouncing all around - and providing a great indication of output.

The PS 4x4 also features ART's "4x4" distribution on the back of the unit -- four of the eight rear outputs are 1.25 inches apart. This allows the user to plug in wide power cables and multiple wall wart devices, and still have eight total power outlets to choose from.

Built into the PS 4x4 is a surge and spike protection system, designed to protect powered equipment from harmful electric surges and spikes. The unit also has RFI and EMI filtering, a 15 amp breaker, and a total power capacity of 1800 watts. The PS 4x4 also features a front-located on/off power switch (which lights up when turned on), and a front-mounted circuit breaker reset switch. The rugged, all-steel chassis occupies 1U rack spaces and is intended for installation into standard 19" equipment racks.

Applications for the PS 4x4 include: Live Sound Systems/PA, Permanent or Fixed Installations, Church, Club and Practice PA Systems, DJ Sound Systems, Home and Project Recording Systems, and Monitor Systems.

The PS 4x4 features a one-year warranty.
MP-15_Thumb.jpg

MP-15
$119.95
Compare
Furman
Power Relay Accessory

The MINIPORT-15 Power Relay is a NRTL-C TUV listed, 15 amp, relay switched 120 VAC outlet, with a terminal strip that allows remote control via safe, inexpensive, low voltage Class 2 wiring. It includes an internal 12 VDC supply, and can be controlled from a remote location with maintained or momentary contact switches.

Multiple MINIPORTs may be connected together so that all are controlled by a single switch closure, and may be linked so that all turn on simultaneously or one by one, in a delayed sequence. If delayed, the delay interval between the turn-on of one MINIPORT and the next is approximately 3 seconds. (Delayed turn-on is useful in avoiding large inrush currents that can trip house circuit breakers, that would otherwise occur if all amps were turned on simultaneously.) Turn-off always occurs simultaneously, however.

A Furman PowerLink can also be used to control MINIPORT(s). In this use, the MINIPORT(s) are connected to terminals on the PowerLink, which provide the necessary control functions. MINIPORTs are similarly compatible with the Furman PowerPort and ASD-120 Sequenced Power Distro. With the addition of a PS-REL AC Relay to provide control, a MINIPORT can be used to extend the capacity of any other Furman power product — or, for that matter, any product with a switched outlet, such as a receiver/ amp controlled with a wireless remote. When used in this manner, the MINIPORT is switched on or off when the outlet that the PS-REL is plugged into goes on or off.

The MINIPORT-15 comes equipped with two knockout holes for permanent installation with 1/2' conduit — one on the top surface, the other on the bottom. Use of the bottom knockout hole requires removing the AC cord. According to the National Electrical Code, 1/2' conduit can accommodate up to five 20 amp circuits using ten THWN 12 gauge stranded wires; however, local codes should be checked for exact requirements.

MINIPORTs are housed in rugged steel enclosures and come equipped with a heavy duty, 10 foot AC cord. The MINIPORT-15 is fused. The MINIPORT-15 is NRTL-C TUV listed.
PDP-950_Thumb.jpg

PDP-950
$119.99
Compare
American Audio
PDP-950 - Power Distribution Panel

  • Power Distribution panel with seven 3-prong power plugs and pop-up lights for your rack.
  • 7 protected switched A/C grounded outlets on rear of unit, & 1 A/C unswitched outlet on rear of unit
  • 1 A/C outlet switched on front of panel
  • Incoming Line Voltage Meter
  • 15A per outlet/20A protection breaker button on front panel
  • Dual L.E.D. pop-out lights with dim control knob
  • USB receptical on front panel
  • Great for lighting up racks
  • Protection: 20A breaker
  • Dimensions: 19" x 1.75" x 6.5" / 482x44x165mm - single space rack mount
  • Weight: 7 lbs. / 3 kgs
M8DX_Thumb.jpg

M8DX
$124.99
Compare
FURMAN
M8DX

Power Conditioner with Pull Out Lights with Digital Voltmeter

A Merit X Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-8x, M-8Lx, or M-8Dx in to the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load.

M-8Dx Power Conditioner
A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-8Dx into the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load. The M-8Dx features two slide out, swiveling light fixtures to provide discreet illumination of your equipment on stages, in studios, and in other dark places. A dimmer knob lets you adjust the lamp brightness to just the right level.The M-8Dx also features a bright red, three-digit LED voltmeter that displays incoming voltage.

M-8Dx_Thumb.jpg

M-8Dx
$129.95
Compare
Furman
Power Conditioner with Digital Meter
A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-8Dx into the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load. The M-8Dx features two slide out, swiveling light fixtures to provide discreet illumination of your equipment on stages, in studios, and in other dark places. A dimmer knob lets you adjust the lamp brightness to just the right level.The M-8Dx also features a bright red, three-digit LED voltmeter that displays incoming voltage.

Features:
  • Noise Filtration: AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)
  • Surge Protection: Spike & surge protection ensures equipment stays safe and your power stays clean
  • 9 Total Outlets: 8 rear panel outlets and 1 front panel convenience outlet
  • Digital Voltmeter: Digital voltmeter display incoming line voltage
  • 15 Amp Rating: 15 amp rating, with circuit breaker
  • "Protection OK" Indicator: Front panel indicator LED lets you know that your equipment is being protected
  • Wall Wart Spacing Indicator: Rear outlets have been spaced to accomodate even the bulkiest of wall warts and adapters
  • Front Panel Pull-out Lights: Two retractable incandescent light fixtures with dimmer control for convenient rack illumination
SC-100_Thumb.jpg

SC-100
$129.99
Compare
Nady
SC-100

Power Controllers

Features:
  • Convenient 1U rack unit for controlling sequenced AC power, On/Off for up to ten pieces of audio equipment
  • Rear panel outlets with front panel LED indicators are sequenced with 1-second delay, allowing for smooth power up and down of power amplifiers, mixer consoles, wireless equipment, etc.
  • Controller provides a gradual turn on process and turns off in reverse order
  • Ten each 3-prong AC outlets are multi-national style compatible with standard US plugs and round European plugs
  • Key lock On/Off switch with bypass for secure operation
  • Internal filtering to reduce noise and spikes
  • Both Hot/Neutral AC lines are interrupted for maximum safety
  • Heavy-duty internal relays for superior reliability
SP4X4PRO_Thumb.jpg

SP4X4PRO
$145.00
Compare
ART
SP4X4PRO

LED Metered PDS

Presenting the 4x4 PRO SERIES Power Distribution Systems from ART. Built on the foundation of the popular 4x4s, the PRO SERIES are durably constructed, reliable power conditioners for use in many applications. Wherever power management system is required, the 4x4 PRO SERIES provide the surge protection you need to keep your rack safe from unwanted disruption.

All PRO SERIES models have an additional internal discrete module called APF™ (Advanced Power Filtering) which filters out digital and dimmer hash as well as any high frequency noise that is above the audio range. Some off-the-shelf add-on modules saturate and lose their filtering effectiveness as the load increases, but by using a high power discrete design we were able to create a filter that stays effective over the full operating range.

By using both Common Mode and Differential Mode topologies in series for the filter design we are able to block virtually all of the unwanted noise that is between the AC line and ground, and also the two sides of the AC line. This has the additional benefit of reducing ground loop problems in your system. High frequency noise currents in particular are highly attenuated in both directions so that any line noise that could be generated by one of your components is not allowed to get back into your main A.C. wiring so if you use a number of PRO SERIES Power Conditioners in your setup, you can distribute and isolate the noisy components from the sensitive components in your system. Additionally, any signals above 10kHz are filtered from the line with over 40dB of attenuation above 100kHz and beyond.

Every PRO SERIES power conditioner is designed with a power capacity of 1800 Watts, surge/spike protection, APF with EMI & RFI filtering, front-mounted unswitched power outlet and an adjustable rear-mounted gooseneck light source for bright illumination behind the rack. The spacing and alignment of the rear outlets to accommodate various size power plugs and AC adapters.

Features:
  • APF - Advanced Power Filtering
  • Pull Out Light Pipes with AutoOff and Dimmer
  • Easy to read LED Input Voltage Metering
  • Power Capacity of 1800 Watts
  • Surge & Spike Protection
  • EMI & RFI Filtering
  • 8 Rear Outlets with Power Adapter Friendly Positioning
  • One Front-mounted Unswitched Power Outlet
  • Rear Mounted Gooseneck Light Source
PST-8_Thumb.jpg

PST-8
$149.00
Compare
Furman
PST-8
POWER STATION SERIES

For over 30 years, Furman has pioneered the development of AC power products for the most demanding audio, video, and broadcast professionals. Furman’s Series Multi-Stage Protection (SMP) delivers the purest AC power and the most comprehensive protection available — going far beyond what is found in traditional surge strips. With Furman’s Power Station Series, everyone can reap the benefits of unrivaled power purification and unequalled surge protection.
MIW-XT_Thumb.jpg

MIW-XT
$149.95
Compare
Furman
MIW-XT
In-Wall POWER AND SIGNAL LINE CORD MANAGEMENT

MIW-XT extends noise free, safe power from Panamax / Furman Power Management components to remote panel displays, ceiling mounted video projectors and powered sub-woofers. Discreetly hides behind electronic equipment for a neat, clean, code compliant and professional installation.

Features:
  • Ultra-thin profile can allow equipment to hang less than one inch from the wall.
  • EMI/RFI noise filtration built into outlet receptacle.
  • Power and signal lines are hidden in the wall behind panel displays for a clean, tidy and professional installation.
  • Extend Connected Equipment Policy to remote equipment when used with Panamax/Furman Power Management components.
  • Accommodates optional MIW Signal Line Modules
    (sold separately, contact Panamax or Furman).
  • Compatible with most standard electrical boxes.
  • CSA Certified for code compliant installations.
  • 3 Year Product Warranty
RPB486-Phantom-Hex_Thumb.jpg

RPB486 Phantom Hex
$150.00
Compare
Rolls
RPB486 Phantom Hex

The RPB486 powers up to 6 condenser microphones with 48 volts of ultra clean phantom power. The outputs are 1/4" Tip-Ring-Sleeve balanced for easy connection to a digital multi-track recorder. To eliminate the possibility of any DC voltages, the RPB486 features pull-down resistors and isolation capacitors on all outputs.

Features:
  • XLR Input, 1/4" TRS Balanced Output.
  • +48 Volt Regulated Phantom Power.
  • LED "In Use" Indication.
  • Perfect for digital multitrack use.
PS4X4PRO_Thumb.jpg

PS4X4PRO
$155.00
Compare
ART
PS4X4PRO

Dual LED Metered PDS

Presenting the 4x4 PRO SERIES Power Distribution Systems from ART. Built on the foundation of the popular 4x4s, the PRO SERIES are durably constructed, reliable power conditioners for use in many applications. Wherever power management system is required, the 4x4 PRO SERIES provide the surge protection you need to keep your rack safe from unwanted disruption.

All PRO SERIES models have an additional internal discrete module called APF™ (Advanced Power Filtering) which filters out digital and dimmer hash as well as any high frequency noise that is above the audio range. Some off-the-shelf add-on modules saturate and lose their filtering effectiveness as the load increases, but by using a high power discrete design we were able to create a filter that stays effective over the full operating range.

By using both Common Mode and Differential Mode topologies in series for the filter design we are able to block virtually all of the unwanted noise that is between the AC line and ground, and also the two sides of the AC line. This has the additional benefit of reducing ground loop problems in your system. High frequency noise currents in particular are highly attenuated in both directions so that any line noise that could be generated by one of your components is not allowed to get back into your main A.C. wiring so if you use a number of PRO SERIES Power Conditioners in your setup, you can distribute and isolate the noisy components from the sensitive components in your system. Additionally, any signals above 10kHz are filtered from the line with over 40dB of attenuation above 100kHz and beyond.

Every PRO SERIES power conditioner is designed with a power capacity of 1800 Watts, surge/spike protection, APF with EMI & RFI filtering, front-mounted unswitched power outlet and an adjustable rear-mounted gooseneck light source for bright illumination behind the rack. The spacing and alignment of the rear outlets to accommodate various size power plugs and AC adapters.

Features:
  • APF - Advanced Power Filtering
  • Pull Out Light Pipes with AutoOff and Dimmer
  • Easy to read LED Input Voltage and Current Metering
  • Power Capacity of 1800 Watts
  • Surge & Spike Protection
  • EMI & RFI Filtering
  • 8 Rear Outlets with Power Adapter Friendly Positioning
  • One Front-mounted Unswitched Power Outlet
  • Rear Mounted Gooseneck Light Source
MP-20_Thumb.jpg

MP-20
$159.95
Compare
Furman
Power Relay Accessory

The MINIPORT-20 Power Relay is a NRTL-C TUV listed, 20 amp, relay switched 120 VAC outlet, with a terminal strip that allows remote control via safe, inexpensive, low voltage Class 2 wiring. It includes an internal 12 VDC supply, and can be controlled from a remote location with maintained or momentary contact switches.

Multiple MINIPORTs may be connected together so that all are controlled by a single switch closure, and may be linked so that all turn on simultaneously or one by one, in a delayed sequence. If delayed, the delay interval between the turn-on of one MINIPORT and the next is approximately 3 seconds. (Delayed turn-on is useful in avoiding large inrush currents that can trip house circuit breakers, that would otherwise occur if all amps were turned on simultaneously.) Turn-off always occurs simultaneously, however.

A Furman PowerLink can also be used to control MINIPORT(s). In this use, the MINIPORT(s) are connected to terminals on the PowerLink, which provide the necessary control functions. MINIPORTs are similarly compatible with the Furman PowerPort and ASD-120 Sequenced Power Distro. With the addition of a PS-REL AC Relay to provide control, a MINIPORT can be used to extend the capacity of any other Furman power product — or, for that matter, any product with a switched outlet, such as a receiver/ amp controlled with a wireless remote. When used in this manner, the MINIPORT is switched on or off when the outlet that the PS-REL is plugged into goes on or off.

The MINIPORT-20 comes equipped with two knockout holes for permanent installation with 1/2” conduit — one on the top surface, the other on the bottom. Use of the bottom knockout hole requires removing the AC cord. According to the National Electrical Code, 1/2" conduit can accommodate up to five 20 amp circuits using ten THWN 12 gauge stranded wires; however, local codes should be checked for exact requirements.

MINIPORTs are housed in rugged steel enclosures and come equipped with a heavy duty, 10 foot AC cord. The MINIPORT-20 is equipped with a precision magnetic circuit breaker. The MINIPORT-20 isNRTL-C TUV. Note: Because of its 20 amp rating, the MINIPORT-20 uses a 20 amp AC plug with perpendicular (not parallel) blades. If in doubt regarding your installation, please consult an electrician or call the factory. The MINIPORT-20 is an upgrade of an earlier Furman MINIPORT. The primary differences are the ability to use momentary switches, the delayed turn-on option, and the additional knockout holes.
PST-8-DIG_Thumb.jpg

PST-8 DIG
$185.00
Compare
Furman
PST-8 D
POWER STATION SERIES

Today’s overworked, outdated power grid delivers poor quality AC power. When connecting sensitive equipment to regular power outlets, AC noise masks and distorts critical signal information which cripples performance. This is why it’s more important that ever to purify or clean the AC powering your sensitive audio/video equipment.
PL-8C_Thumb.jpg

PL-8C
$189.95
Compare
Furman
Power Conditioner
The Classic Series from Furman brings together superior protection and outstanding performance in a sturdy, rack-mountable design. The Classic Series features Furman’s revolutionary Series Multi-Stage Protection (SMP), Linear Filtering Technology (LiFT), and Extreme Voltage Shutdown (EVS). Together, these technologies comprise what is, without question, one of the world's most advanced and comprehensive transient voltage surge supressors.

Features:
  • Surge Protection: Furman's exclusive SMP technology provides the highest level of surge & spike protection available.
  • Noise Filtration: LiFT offers AC power filtering to ensure clean power for unequaled audio & video clarity.
  • Voltage Protection: Advanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions.
  • Pull-out Lights: Dual smooth track retractable LED lights illuminate equipment in your rack.
  • Diagnostic Lights: LED status indicators warn you when voltage is outside of nominal range or when protection has been compromised.
  • Isolated Banks: Isolated outlet banks minimize inter-component interference and noise contamination.
  • Wall Wart Spacing: Three widely spaced outlets accommodate bulky AC power transformers.
  • 15 AMP Rating: 15 Amp rating featuring a high inrush magnetic circuit breaker for added protection.
  • Nine Total Outlets: Nine total outlets (8 rear panel outlets and one front panel convenience outlet).
  • BNC Lamp Connector: Rear panel BNC connector powers any standard gooseneck lamp for rear rack illumination.

Sort By: Name | Price
Results 1-40 of 6512
 
 

BRAND STORE

 View All
 
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
 
New in Store
Polytune Mini
$89.99