Podium Mics

Sort By: Name | Price

Podium Mics

596LB

$49.00

Compare

596LB

List Price: ~~$53.00~~

Your Price: $49.00

Vendor Name

596LB

Quantity:

Shure

Voice Communication Microphone

Designed for communication systems — mobile and fixed station — including police, fire, utilities, transportation, commercial, and industrial applications.

Additional Recommended Uses:

Intercom
Two-Way Radio

Features:

Frequency response designed for voice communications
Omnidirectional mic element
Double-pole, single-throw PTT switch
Four conductor, shielded, bare-ended (no connector) coil cord
Does not require DC power for operation
Mounting bracket included

(Test conditions unless otherwise specified: audio output measured between white lead and green lead; PTT switch depressed; dc voltmeter 10 megohms or greater input impedance; ac voltmeter 1 megohm or greater input impedance.)
Type: Dynamic
Frequency Response: 200 to 5,000 Hz
Polar Pattern: Omnidirectional
Impedance (at 1,000 Hz): 400 ohms
Output Level (at 1,000 Hz): -33 dB +/- 3.0 dB,(0 dB = 1 V/10 Pascal. 1 Pa = 94 dB SPL)
Hum Sensitivity: 36 dB maximum equivalent SPL per 1 mOe electromagnetic field
Environmental Conditions: Operating Temperature: -40 degrees to 74 degrees C (-40 degrees to 165 degrees F), Storage Temperature: -54 degrees to 85 degrees C (-65 degrees to 185 degrees F), Relative Humidity: 0 to 95% (non-condensing)
Switch: Double-pole, double-throw, push-to-talk, normally open
Cable: 1.5 m (5 ft) extended length, 4-conductor (2 shielded), vinyl-jacketed coil-cord
Construction: Case Black textured high-impact ARMO-DUR
Net Weight: 260 grams (9.17 oz) with cable

515SDX

$60.20

Compare

515SDX

List Price: ~~$64.00~~

Your Price: $60.20

Vendor Name

515SDX

Quantity:

Shure

Unidirectional Dynamic Microphone

The Shure Model 515SDX is a dual-impedance, cardioid (unidirectional) dynamic microphone that is suitable for speech pickup in schools, churches, and meeting rooms. Its unidirectional polar pattern greatly reduces feedback.

The 515SDX includes a locking ON/OFF switch and an internal impedance selection socket mounted on the XLR connector for switching between high and low impedance. A slip-in swivel adapter is supplied for stand-mounted use.

Features:

Rolled-off low-frequency response combined with a smooth high-frequency rise for clear and intelligible voice pickup
Symmetrical cardioid pickup pattern minimizes feedback
Neodymium magnet for high signal-to-noise ratio
Shock-mounted cartridge that minimizes handling noise
Lockable ON/OFF switch
Dual impedance selectable by internal socket
Slip-in swivel adapter for stand-mounted use
Three-pin professional audio connector, the industry standard, for maximum interchangeability of cables
Tough, die-cast grille resists wear from constant use and handling
Field serviceable and backed by the Shure 2-year warranty

Type: Dynamic
Frequency Response (Figure 1): 80 to 15,000 Hz
Polar Pattern (Figure 2): Cardioid (unidirectional)
Phasing: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 in both HI Z and LO Z modes
Switch: Built-in ON/OFF switch, lockplate to lock switch ON
Connector: Three-pin professional (male XLR) type
Cartridge Shock Mount: Internal rubber vibration-isolator
Swivel Adapter: Positive action, break-resistant, adjustable through 180, slip-out removal for handheld use, designed for mounting on stand with 5/8 in.–27 thread
Case: Platinum beige enamel die casting with platinum beige die-cast grille and stainless steel screen

588SDX

$70.00

Compare

588SDX

List Price: ~~$74.00~~

Your Price: $70.00

Vendor Name

588SDX

Quantity:

Shure

The Model 588SDX is a ball-type, dual-impedance, cardioid (unidirectional) dynamic microphone that provides excellent voice reproduction. Its spherical grille is a very effective wind and pop filter which is especially good when used for closeup vocal miking. This microphone is highly suited for speech or music pickup in schools, churches, and meeting rooms. Its unidirectional polar pattern greatly reduces feedback problems, permitting operation closer than usual to loudspeakers without the annoying squeal or howl caused by feedback. The microphone is equipped with a lockable ON/OFF switch and an internal impedance selection socket located on the XLR connector for switching between high and low impedance. A slip-in swivel adapter is supplied for the convenience of stand-mounted use.

588SDX with swivel adapter and on-off switch. Cable not included.

Features:

Controlled low-frequency response combined with a smooth high-frequency rise for clear and intelligible voice pickup
Symmetrical cardioid pickup pattern minimizes feedback
Spherical grille provides effective filtering out of breath noise and popping when used for closeup vocals, and of wind noise when used outdoors
Neodymium magnet for high signal-to-noise ratio
Shock-mounted cartridge for quiet operation and low stand/ handling noise
Lockable ON/OFF switch
Dual impedance selectable by internal socket
Break-resistant, slip-in swivel adapter for stand-mounted use
Three-pin professional audio (XLR) connector
Tough, steel-mesh grille resists wear from constant use and handling; die-cast handle
Field serviceable and backed by the Shure 2-year warranty

Type: Dynamic (moving coil)
Frequency Response: 80 to 15,000 Hz
Polar Pattern: Cardioid (unidirectional) symmetrical about axis
Impedance: LO Z: Microphone rated impedance is 150 ohms (270 ohms actual) for connection to microphone inputs rated low impedance, HI Z: Microphone impedance is "High" for connection to high-impedance microphone inputs
Sensitivity (at 1,000 Hz): LO Z: Open Circuit Voltage* -55.5 dBV/Pa (1.7 mV), HI Z: Open Circuit Voltage* -37.0 dBV/Pa* (14.1 mV), (*1 Pascal=94 dB SPL)
Polarity: Positive pressure on the diaphragm produces positive voltage on pin 2 relative to pin 3 in both HI Z and LO Z modes
Switch: Built-in ON/OFF switch, lockplate to lock switch ON
Connector: Three-pin professional (male XLR) type
Cartridge Shock Mount: Internal rubber vibration-isolator
Swivel Adapter: Positive action, break-resistant, adjustable through 180 degrees, slip-out removal for handheld use, designed for mounting on stand with 5/8-in.-27 thread
Case: Platinum beige enamel die casting with platinum beige steel grille
Net Weight: 315 grams (11.1 oz)

514B

$70.00

Compare

514B

List Price: ~~$75.00~~

Your Price: $70.00

Vendor Name

514B

Quantity:

Shure

Intercom
Two-Way Radio

Features:

Frequency response designed for voice communications
Omnidirectional mic element
Rugged, high impact ARMO-DUR case
Double-pole, single-throw PTT switch designed for constant usage
Four conductor, shielded, bare-ended (no connector) coil cord
Does not require DC power for operation
Mounting bracket included

Type: Dynamic
Frequency Response: 100 to 6,000 Hz
Impedance: Microphone rating impedance is 150 ohms (200 ohms actual) for connection to microphone inputs rated at 19 to 300 ohms.
Output Level: Open Circuit Voltage (-36.5 dB (15 mV))(-56.5 dBV/Pa (1.5 mV))
Switch: Push-to-talk, leaf-type switch to actuate microphone circuit and relay or switching circuit. Microphone circuit normally open.
Cable: 1.5 m (5 ft) extended, four-conductor, two-conductors shielded, neoprene-jacketed, coiled cable
Case: Matte black ARMO-DUR
Net Weight: 200 grams (7 oz)
Packaged Weight: 372 grams (13 oz)

527B

$77.00

Compare

527B

List Price: ~~$83.00~~

Your Price: $77.00

Vendor Name

527B

Quantity:

Shure

Intercom
Two-Way Radio

Features:

Frequency response designed for voice communications
Omnidirectional mic element
Rugged, high impact ARMO-DUR case
Double-pole, single-throw PTT switch designed for constant usage
Four conductor, shielded, bare-ended (no connector) coil cord
527B does not require DC power for operation; 527C requires DC power for operation (4 to 35 Vdc @ 16mA)
Mounting bracket included

Note: The 527B does not require DC power for operation; however, the 527C requires DC power (4 to 35 Vdc @ 16mA).

Type: Dynamic
Frequency Response: 60 to 11,000 Hz
Polar Pattern: Cardioid (unidirectional) - uniform with frequency, symmetrical about axis
Impedance: Dual. Microphone rating impedance is 150 ohms (260 ohms actual) for connection to microphone inputs rated at 19 to 300 ohms and "High" for connection to high-impedance microphone inputs. Switch is in high-impedance position as supplied. To change impedance, see sections on lmpedance Selection and Connections in User Guide.
Sensitivity (AT 1,000 Hz): LOW: Open Circuit Voltage* -57.5 dB Ref. 1V/Pascal (1.3 mV), HIGH: Open Circuit Voltage* -38.5 dB Ref. 1V/Pascal (12 mV)
Switch: Press-to-Talk Switch - locking or nonlocking operation to actuate microphone circuit and an external relay or control circuit. Microphone circuit normally shorted in both high and low impedance.
Impedance Selection Switch - double-pole double- throw slide switch in microphone base to provide either high- or low-impedance operation.
Cartridge Shock Mount: Internal rubber vibration-isolator
Cable: 2.1 m (7 ft) four-conductor, two conductors shielded non-detachable
Case: Two-tone gray ARMO-DUR with dull-chrome-plated steel screen
Net Weight: 736 grams (1 Ib 10 oz)
Shipping Weight: 1020 grams (2 Ib 4 oz)

515SBGX

$79.80

Compare

515SBGX

List Price: ~~$86.00~~

Your Price: $79.80

Vendor Name

515SBGX

Quantity:

Shure

The Shure Model 515SBGX microphones are low-impedance dynamic microphones designed to be mounted on flexible goosenecks or fixed pips. Optimized frequency response and a unidirectional (cardioid) pickup pattern makes them ideal for language labs, paging applications, and base station communications. They are also recommended for use as talkback or cuing microphones in TV, film, and recording studios. Because of their low impedance, these microphones retain their level and response characteristics even when long lengths of cable are used.

All three models are supplied with a push-to-talk button and a four-conductor cable (two conductors shielded).

Features:

Frequency response optimized for announcing, narration, and paging applications
Cardioid pickup pattern symmetrical about axis
Neodymium magnet for high signal-to-noise ratio
Shock-mounted cartridge for quiet operation and low stand/handling noise
Tough diecast locking grille and handle
Built-in push-to-talk button controls microphone circuit and relay or control circuit
45.7 cm (18 in.) gooseneck and mounting flange supplied (515SBG-18X and 515SBG-18XF only)

Type: Dynamic (moving coil)
Frequency Response: 80 to 15,000 Hz (see Figure 1)
Polar Pattern: Cardioid (unidirectional). Effective rejection of sound at rear of microphone is uniform at all frequencies, while front pickup characteristics are uniform about axis (see Figure 2).
Impedance: 150 O rated (180 O actual)
Phasing: Positive pressure on diaphragm produces positive voltage on RED cable relative to BLACK cable lead
Switch: Built-in, leaf-type, non-locking, push-to-talk
Shock Mount: Internal rubber vibration isolator
Case: Silver finish die casting with black enamel diecast grille and stainless steel screen

APEX145

$79.99

Compare

APEX145

List Price: ~~$99.99~~

Your Price: $79.99

Vendor Name

APEX145

Quantity:

Apex

APEX145

Dynamic Desktop

Designed for the boardroom, for conference rooms, seminars or press conferences and any other application where the person speaking has to be able to switch their own microphone on and off.

Ideal for any situation where a desktop or podium microphone cannot be permanently installed.

Features:

Integrated Stand & Gooseneck
Cardioid Pick-up Pattern
Push to Talk Switch

Type: Desk Microphone
Element: Dynamic
Frequency Response: 100Hz - 12kHz
Sensitivity: -75dB
Impedance: 500 ohms
S/N: >65dB
Max SPL: 130dB
Connection: XLR-M
Dimensions: 6.4 x 4.4 x 18.5 in / 162 x 112 x 470 mm
Weight: 4.2 oz / 119 g

527C

$81.20

Compare

527C

List Price: ~~$87.00~~

Your Price: $81.20

Vendor Name

527C

Quantity:

Shure

Intercom
Two-Way Radio

Features:

Frequency response designed for voice communications
Omnidirectional mic element
Rugged, high impact ARMO-DUR case
Double-pole, single-throw PTT switch designed for constant usage
Four conductor, shielded, bare-ended (no connector) coil cord
527B does not require DC power for operation; 527C requires DC power for operation (4 to 35 Vdc @ 16mA)
Mounting bracket included

Note: The 527B does not require DC power for operation; however, the 527C requires DC power (4 to 35 Vdc @ 16mA).

104C

$84.00

Compare

104C

List Price: ~~$90.00~~

Your Price: $84.00

Vendor Name

104C

Quantity:

Shure

Voice Communication Microphone with Carbon Element

Designed for demanding outdoor and indoor communication systems — mobile and fixed station — including police, fire, utilities, forestry, mining, drilling, transportation, and industrial applications.

Recommended Uses:

Industrial Intercom
Emergency Voice Communication System
Two-Way Radio

Features:

Frequency response specifically designed for voice communications
Dependable in extreme environmental conditions
Rugged, high-impact ARMO-DUR® case, comfortable to the touch in hot or cold weather
Double-pole, single-throw PTT switch designed for rigorous conditions and constant usage
Four conductor, bare-ended (no connector) coil cord with rubber jacket
Requires DC power for operation (5 to 24 Vdc @ 50 mA)
Mounting bracket included

Note: The 104C works only with an input designed for a carbon microphone. The 104C will not operate with public address or paging systems that require a dynamic mic element.

Type: Carbon
Frequency Response: 300 to 4,000 Hz
Recommended Load Impedance: 50 to 100 ohms
Actual Impedance: 30 ohms (with 50 mA current)
Output Sensitivity: 5 dB below 1V for 100 microbar signal (voltage measured across 100-ohm load)
Recommended Operating Current: 50 mA (20 mA minimum, 120 mA maximum)
Switch: Double-pole, single-throw, leaf-type to control microphone and relay circuits
Cable: Non-detachable, 1.8m (6 ft), four-conductor, coiled cable
Case: Gray high-impact ARMO-DUR
Mounting Bracket: Supplied
Dimensions: See User Guide
Net Weight: 510 grams (1 Ib, 2 oz)
Shipping Weight: 624 grams (1 lb, 6 oz)

515BSLX

$84.00

Compare

515BSLX

List Price: ~~$90.00~~

Your Price: $84.00

Vendor Name

515BSLX

Quantity:

Shure

Unidirectional Microphone

The Shure Model 515BSLX is a dynamic (moving coil), low-impedance, cardioid (unidirectional) microphone designed for mounting on a gooseneck or fixed pipe with a 5/8 in.-27 thread. The cardioid pickup pattern provides excellent voice reproduction with effective rejection of feedback and background noise. The 515BSLX is especially suitable for use in communications, paging, and talkback systems. The microphone is supplied with a slide switch controlling the microphone audio and a relay circuit, permitting hands-free operation. The microphone comes with a 1.8 m (6 ft) four-conductor, two conductors shielded, cable.

The 515BSLX is wired with the microphone circuit normally open for use in parallel-wired microphone installations.

Features:

Rolled-off low-frequency response combined with a smooth high-frequency rise for clear and intelligible voice pickup
Symmetrical cardioid pickup pattern minimizes feedback
Shock-mounted cartridge for quiet operation and low stand/handling noise
Neodymium magnet for high signal-to-noise ratio
Heavy-duty zinc, die-cast, locking, metal grille protects cartridge and resists wear
Built-in slide switch controls both microphone circuit and relay or control circuit
Backed by the Shure 2-years warranty

Type: Dynamic (moving coil)
Frequency Response (Figure 1): 80 to 15,000 Hz
Polar Pattern (Figure 2): Cardioid (unidirectional). Effective rejection of sound at rear of microphone is uniform with frequency; front pickup characteristics
are symmetrical about axis.
Impedance: 150 O rated (180 O actual)
Polarity Positive pressure on diaphragm produces positive voltage on the RED lead with respect to the BLACK lead
Switch: Built-in, double-pole double-throw slide switch. Lockplate to lock switch ON
Shock Mount: Internal rubber vibration isolator
Cable: 1.8 m (6 ft) cable with effective hum shielding, four conductors (two shielded), plastic jacketed
Case: Black finish die casting with black enamel diecast grille and stainless steel screen

562

$85.40

Compare

562

List Price: ~~$121.00~~

Your Price: $85.40

Vendor Name

562

Quantity:

Shure

"Close-Talk" Voice Communication Microphone

Designed for indoor communication systems, including transportation, restaurant, and industrial applications. Suitable for environments with high levels of background noise.

Additional Recommended Uses:

Intercom
Voice Recognition

Features:

Frequency response tailored for voice communications
Directional microphone element
Minimal pick-up of background noise due to close-talk design
Attaches to flexible gooseneck arm (not included)
Two conductor, shielded, bare-ended (no connector), straight cable
Does not require DC power for operation

Note: For proper operation, mouth-to-microphone distance should be 2 inches (5 cm) or less.

Type: Noise-canceling Dynamic
Frequency Response: 100 to 6,000 Hz
Impedance: 150 Ohms, rated (180 Ohms, actual). Designed for connection to inputs rated 19 to 300 Ohms.
Output Level (at 1,000 Hz): Open Circuit Voltage -64 dBV/Pa (0.6 mV) (1 Pa = 94 dB SPL)
Polarity: Positive pressure on diaphragm produces positive voltage on the white cable lead relative to the black lead.
Cable: 1.2m (4 ft.), non-detachable, two-conductor shielded
Stand Thread: Suitable for mounting on stand or gooseneck with 5/8" -27 thread.
Case: Silver and black aluminum with stainless steel grille
Net Weight: 128 grams (4.5 oz.)
Packaged Weight: 241 grams (8.5 oz.)

561

$93.80

Compare

561

List Price: ~~$101.00~~

Your Price: $93.80

Vendor Name

561

Quantity:

Shure

Voice Communication Microphone

Designed for indoor communication systems, including transportation, restaurant, and industrial applications.

Additional Recommended Uses:

Intercom
Voice Recognition

Features:

Frequency response tailored for voice communications
Omnidirectional microphone element
Attaches to flexible gooseneck arm (not included)
Two conductor, shielded, bare-ended (no connector), straight cable
Does not require DC power for operation

Type: Dynamic
Frequency Response: 40 to 10,000 Hz
Polar Pattern: Omnidirectional
Impedance: Rated at 150 Ohms (200 Ohms actual). Designed for connection to inputs rated at 19 to 300 Ohms.
Output Level (at 1,000 Hz): Open Circuit Voltage -57.5 dBV/Pa (1.33 mV)
Polarity: Positive pressure on diaphragm produces positive voltage on the white cable lead relative to the black lead.
Cable: 1.2 m (4 ft.) two-conductor, shielded, unterminated.
Stand Thread: Suitable for mounting on stand or gooseneck with 5/8"-27 thread.
Case: Silver and black aluminum with stainless steel grille.
Net Weight: 142 grams (5 oz.)
Packaged Weight: 255 grams (9 oz.)

1 Pa = 94 dB SPL

515SBG-18X

$98.00

Compare

515SBG-18X

List Price: ~~$105.00~~

Your Price: $98.00

Vendor Name

515SBG-18X

Quantity:

Shure

The Shure Model 515SBG-18X microphones are low-impedance dynamic microphones designed to be mounted on flexible goosenecks or fixed pips. Optimized frequency response and a unidirectional (cardioid) pickup pattern makes them ideal for language labs, paging applications, and base station communications. They are also recommended for use as talkback or cuing microphones in TV, film, and recording studios. Because of their low impedance, these microphones retain their level and response characteristics even when long lengths of cable are used.

All three models are supplied with a push-to-talk button and a four-conductor cable (two conductors shielded).

Features:

Frequency response optimized for announcing, narration, and paging applications
Cardioid pickup pattern symmetrical about axis
Neodymium magnet for high signal-to-noise ratio
Shock-mounted cartridge for quiet operation and low stand/handling noise
Tough diecast locking grille and handle
Built-in push-to-talk button controls microphone circuit and relay or control circuit
45.7 cm (18 in.) gooseneck and mounting flange supplied (515SBG-18X and 515SBG-18XF only)

CBL410 PCC black

$99.00

Compare

CBL410 PCC black

List Price: ~~$119.00~~

Your Price: $99.00

Vendor Name

3177H00010

Quantity:

AKG

CBL410 PCC black

The CBL410 PCC black is a simple to use, plug and play desktop microphone for use with any PC or Laptop. It improves audio quality incredibly when making a conference via VOIP. The microphone reproduces the voice with a clear and natural sound.

With its 3,5 mm stereo jack it is a 100% plug and play device. No drivers are needed.

Its ability to be cascaded makes the CBL410 PCC black the perfect tool for modern communication for both single person use in the office and/or multi-person use in a modern meeting room.

This microphone provides optimum intelligibility and audio quality for your meetings.
The CBL410 PCC black is also an excellent choice for recording applications.

Features:

Plug and play via 3,5 mm stereo jack
Omnidirectional capsule
Cascadable for multi-person use (up to 5 units)
Wide frequency range

Type: condenser permanent load, omnidirectional
Polar pattern: omnidirectional
Frequency range: 20 Hz to 20 kHz
Sensitivity: 3,88mVPa (-48dbV)
Max. SPL: 120 dB (for 1%THD)
Signal/noise ratio: 58 dBA
Impedance: 2000 ohms
Supply voltage: 1.5 to 5 V DC
Connector: 3,5 mm stereo jack
Cable: 100 cm (39.4 in.)
Finish: black / white
Dimensions: 114 x 114 x 21 mm (4.5 x 4.5 x 0.8 in.)
Net weight: 159 g (5.6 oz.)

CBL410 PCC white

$99.00

Compare

CBL410 PCC white

List Price: ~~$119.00~~

Your Price: $99.00

Vendor Name

3177H00020

Quantity:

AKG

CBL410 PCC white

The CBL410 PCC white is a simple to use, plug and play desktop microphone for use with any PC or Laptop. It improves audio quality incredibly when making a conference via VOIP. The microphone reproduces the voice with a clear and natural sound.

With its 3,5 mm stereo jack it is a 100% plug and play device. No drivers are needed.

Its ability to be cascaded makes the CBL410 PCC white the perfect tool for modern communication for both single person use in the office and/or multi-person use in a modern meeting room.

This microphone provides optimum intelligibility and audio quality for your meetings.
The CBL410 PCC white is also an excellent choice for recording applications.

Features:

Plug and play via 3,5 mm stereo jack
Omnidirectional capsule
Cascadable for multi-person use (up to 5 units)
Wide frequency range

515SB-G18XF

$101.00

Compare

515SB-G18XF

List Price: ~~$101.00~~

Your Price: $101.00

Vendor Name

515SBG-18XF

Quantity:

Shure

515SB-G18XF

The Shure 515BSM is a rugged handheld microphone intended for mounting on standard microphone stands with a 5/8"-27 thread. The frequency response is tailored to eliminate low frequency noise and capture speech with maximum intelligibility. The cardioid polar pattern suppresses feedback and noise from the off-axis sections of the capsule. The 515BSM features a permanently attached cable with a professional 3-pin XLR connection. The microphone is a perfect choice for paging and other communication applications.

Optimized Frequency Response

The 515BSM is intended for capturing speech and the frequency response is ptimized to maximize intelligibility.

Cardioid Polar Pattern

The cardioid polar pattern effectively minimizes noise and off-axis feedback.

Shock-Mounted Cartridge

The shock-mounted cartridge minimizes handling noise.

Transducer: Dynamic
Polar Pattern: Cardioid
Frequency Response: 80Hz to 15kHz
Power Requirements: Dynamic Microphone, External Power Not Required
Output Impedance: 150 ohms rated (180 ohms actual)
Output Connectors: 3-pin XLR
Pad: No
Low Frequency Roll-Off: No
Dimensions: Microphone: (6.5 x 1.5") (16.5 x 3.75cm) (Length x Diameter)
Cable: 6' (1.8m) (Length)
Gooseneck Length: 18" (45.72cm)
Weight: 315 g (11.1 oz)

503BG

$105.00

Compare

503BG

List Price: ~~$113.00~~

Your Price: $105.00

Vendor Name

503BG

Quantity:

Shure

Intercom
Voice Recognition

Features:

Frequency response tailored for voice communications
Directional microphone element
Minimal pick-up of background noise due to close-talk design
Hum-bucking coil reduces induced noise from computer displays
Attaches to flexible gooseneck arm (not included)
Two conductor, shielded, bare-ended (no connector), straight cable
Does not require DC power for operation

Note: For proper operation, mouth-to-microphone distance should be 2 inches (5 cm) or less.

Type: Dynamic, unidirectional (cardioid), close-talking
Frequency Response: 100 to 7,000 Hz
Impedance: 170 ohms actual
Output Level (Open Circuit Voltage): -61.5 dBV/Pa (.84mV) : 1 Pa = 94 dBSPL , -41.5 dB (8.4 mV): 0 dB = 1V/100 microbar
Polarity: Positive pressure on diaphragm produces positive voltage on white conductor with respect to black conductor
Hum Pickup: Maximum 15 dB equivalent SPL in m0e field
Cable: 1.2 m (4 ft) two-conductor shielded
Case: Aluminum with black enamel finish; stainless steel screen.
Net Weight: 128 g (4.5 oz)
Acoustic Considerations: The 503BG maximizes performance in close-talking applications through its tailored frequency response, directionality and distance discrimination. It optimizes and controls sounds within the 100 to 7000 Hz frequency range and reduces sounds outside that range. The 503BG rejects noise through its inherent directional properties and discriminates against distant sounds in favor of close-range sounds.

545SD-LC

$113.40

Compare

545SD-LC

List Price: ~~$122.00~~

Your Price: $113.40

Vendor Name

545SD-LC

Quantity:

Shure

Classic Unidyne Instrument Microphone

The predecessor to the SM57, The 545SD Classic Unidyne Instrument Microphone is a dual-impedance, unidirectional, dynamic microphone.

Shipped connected for low-impedance operation, the 545SD features a silent magnetic reed on/off switch with lock-on option. A favorite for instrument pickup and recording, the 545SD can also be used on lecterns in public address systems.

545SD-LC Cable not included

Features:

Exceptionally uniform cardioid pattern minimizes feedback
Selectable dual-impedance operation
Silent magnetic reed on/off switch with lock option
Cardioid, dynamic
Frequency response: 50 to 15,000 Hz

Type: Dynamic
Frequency Response: 50 to 15,000 Hz
Polar Pattern: Cardioid (unidirectional)--uniform with frequency, symmetrical about axis
Impedance: Dual. Microphone rating impedance is 150 ohms (250 ohms actual) for connection to microphone inputs rated at 19 to 300 ohms and "High" for connection to high-impedance microphone inputs. Wired for low impedance as supplied. To change impedance, see sections on lmpedance Selection and Connections in User Guide.
Output Level (at 1,000 Hz): LOW: Open Circuit Voltage* -58.0 dB (1.3 mV), HIGH: Open Circuit Voltage* -35.0 dB (17.6 mV), (*0 dB = 1 volt per Pascal (1 Pa = 94 dB SPL))
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 (with respect to pin 3).
Switch: Built-in magnetic reed on/off switch with lockplate.
Cartridge Shock Mount: Internal rubber vibration-isolator
Swivel Adapter: Positive action, adjustable through 90 degrees from vertical to horizontal, permits easy removal for handheld use, suitable for mounting on stand with 5/8"- 27 thread
Case: Chrome-plated die casting with ARMO-DUR grille and stainless steel screen
Net Weight (less cable): 255 grams (9 oz)

450D

$118.00

Compare

520DX

$119.00

Compare

520DX

List Price: ~~$149.00~~

Your Price: $119.00

Vendor Name

520DX

Quantity:

Shure

"Green Bullet" Harmonica Microphone

With its signature green and chrome die-cast casing, the 520DX "Green Bullet" holds a spot in history as the definitive blues harp voice.

The 520DX features a volume control knob at the base of the microphone that allows users to make adjustments to suit their needs during live performance. An attached cable with a standard 1/4-inch plug allows the microphone to be connected to a high-impedance device. Contoured to fit perfectly between harmonica and hands, it can also be used for distinct, lo-fi vocals.

Features:

520DX includes attached cable
Volume control knob allows users to adjust the volume to fit each musical situation
Rugged, dynamic cartridge with improved response
High-impedance, omnidirectional
Supplied with 1/4 inch connector
Frequency response 100 to 5,000 Hz

Type: Dynamic
Frequency Response: 100 to 5,000 Hz
Polar Pattern: Omnidirectional
Impedance: High, unbalanced
Load Impedance Range: Minimum: 100 kilohms
Output Level (at 1,000 Hz): Open Circuit Voltage -38.0 dBV/Pa (13 mV)*
Polarity: Positive sound pressure on diaphragm produces positive voltage on tip with respect to sleeve (ground) of microphone output phone plug connector
Cable: 6.1 m (20 ft) two conductor shielded with standard 1/4-inch phone plug attached (supplied wired for high-impedance, unbalanced connection)
Case: Green and chrome finished die casting
Dimensions: 63 mm (2.5 in) max diameter, 82.6 mm (3 1/4 in) long
Net Weight (with cable): 737 grams (26 oz)

MX400SMP

$119.00

Compare

522

$126.00

Compare

522

List Price: ~~$135.00~~

Your Price: $126.00

Vendor Name

522

Quantity:

Shure

Voice Communication Microphone

Designed for indoor communication systems — fixed station — including police, fire, transportation, restaurant, and industrial applications. Suitable for high noise environments.

Additional Recommended Uses:

Intercom
Two-Way Radio

Features:

Frequency response tailored for voice communications
Directional microphone element
Switch-selected dual impedance output
PTT switch that can be locked “On” for hands-free operation
Four conductor, shielded, bare-ended (no connector), straight cable
Adjustable height
Does not require DC power for operation

Type: Dynamic
Frequency Response: 60 to 11,000 Hz
Polar Pattern: Cardioid (unidirectional) - uniform with frequency, symmetrical about axis
Impedance: Dual. Microphone rating impedance is 150 ohms (260 ohms actual) for connection to microphone inputs rated at 19 to 300 ohms and "High" for connection to high-impedance microphone inputs. Switch is in high-impedance position as supplied. To change impedance, see sections on lmpedance Selection and Connections in User Guide.
Sensitivity (AT 1,000 Hz): LOW: Open Circuit Voltage* -57.5 dB Ref. 1V/Pascal (1.3 mV), HIGH: Open Circuit Voltage* -38.5 dB Ref. 1V/Pascal (12 mV)
Switch: Press-to-Talk Switch - locking or nonlocking operation to actuate microphone circuit and an external relay or control circuit. Microphone circuit normally shorted in both high and low impedance.
Impedance Selection Switch - double-pole double- throw slide switch in microphone base to provide either high- or low-impedance operation.
Cartridge Shock Mount: Internal rubber vibration-isolator
Cable: 2.1 m (7 ft) four-conductor, two conductors shielded non-detachable
Case: Two-tone gray ARMO-DUR® with dull-chrome-plated steel screen
Net Weight: 736 grams (1 Ib 10 oz)
Shipping Weight: 1020 grams (2 Ib 4 oz)

*(1 Pa = 94 dB SPL)

515BSM

$126.00

Compare

515BSM

List Price: ~~$135.00~~

Your Price: $126.00

Vendor Name

515BSM

Quantity:

Shure

Unidirectional Dynamic Microphone

The Shure Model 515BSM is a low-impedance, dynamic microphone designed for hand-held or fixed use. The unidirectional (cardioid) pickup pattern provides excellent reproduction of voice and effective rejection of feedback. The microphones are supplied with a push-to-talk switch and a four-conductor, retractable cable (2 shielded conductor).

These microphones are especially suitable for use in paging systems, public speaking, stage performance, and public address systems. They are also highly recommended for other applications requiring both hand-held and fixed installation operations. The microphones are wired with the microphone circuit normally open for use in parallel microphone installations.

Features:

Frequency response optimized for announcing, narration, and paging applications
Cardioid pickup pattern: symmetrical about axis
Neodymium magnet for high signal-to-noise ratio
Shock-mounted cartridge for quiet operation and low stand/handling noise
Tough diecast, locking grille and handle resist wear from constant use and handling
Built-in push-to-talk switch controls both microphone circuit and relay or control circuit

Type: Dynamic (moving coil)
Frequency Response: 80 to 15,000 Hz (see Figure 1)
Polar Pattern: Cardioid (unidirectional). Effective rejection of sound at rear of microphone is uniform at all frequencies, while front pickup characteristics are uniform about axis (see Figure 2).
Impedance: 150 O rated (180 O actual)
Output Level (at 1,000 Hz): Open Circuit Voltage*: –57.0 dBV/Pa* (0.14 mV)
Switch: Built-in, leaf-type, non-locking, push-to-talk
Shock Mount: Internal rubber vibration isolator
Cable: Highly durable, retractable cable with effective hum shielding, four conductors (two shielded), neoprene jacketed with 5-pin connector
Length: 330 mm (13 in.) retracted, 1.83 m (6 ft) extended
Case: Silver finish die casting with black enamel diecast grille and stainless steel screen

577B

$126.00

Compare

577B

List Price: ~~$135.00~~

Your Price: $126.00

Vendor Name

577B

Quantity:

Shure

"Close-Talk" Voice Communication Microphone

Designed for communication systems — mobile and fixed station — including police, fire, utilities, transportation, commercial, and industrial applications. Suitable for environments with high levels of background noise.

Additional Recommended Uses:

Intercom
Two-Way Radio

Features:

Frequency response designed for voice communications
Directional mic element
Minimal pick-up of background noise due to close-talk design
Rugged, high impact ARMO-DUR case
Double-pole, single-throw PTT switch designed for constant usage
Four conductor, shielded, bare-ended (no connector) coil cord
Does not require DC power for operation
Mounting bracket included

Note: For proper operation, mouth-to-microphone distance should be 1 inch (2.5 cm) or less.

Type: Dynamic, noise-canceling
Frequency Response: 100 to 5,000 Hz
Impedance (at 1000 Hz): Rated at 150 ohms (175 ohms actual) for connection to microphone inputs rated at 19 to 300 ohms.
Output Level (at 1,000 Hz, 5/16 in.): Open Circuit Voltage -66.0 dBV/Pa (0.5 mV), (0 dB = 1 volt per 1 Pascal/94 dB SPL)
Hum Sensitivity: Equivalent to 32 dB SPL in 1 millioersted field
Operating Temperature Range: -40 degrees to 74 degrees C (-40 degrees to 165 degrees F)
Switch Type: Double-pole, single-throw, leaf-type, push-to-talk
Cable: Non-detachable. 1.8m (6 ft), neoprene-jacketed coil cord, four-conductor (two conductors shielded).
Case: Two-tone gray, high-impact ARMO-DUR
Net Weight: 330 grams (11.6 oz)

565SD-LC

$126.00

Compare

565SD-LC

List Price: ~~$135.00~~

Your Price: $126.00

Vendor Name

565SD-LC

Quantity:

Shure

Classic Unisphere Vocal Microphone

The predecessor to the SM58, The 565SD Classic Unisphere Vocal Microphone is a dual-impedance, unidirectional dynamic microphone famous for its spot on the Woodstock stage.

It features highly effective wind and "pop" filter for vocals and a durable, wire-mesh front grille. Shipped connected for low-impedance operation, the 565SD provides excellent vocal or speech reproduction onstage, and can also be used with public address systems.

Available Options:

565SD-LC Cable Not Included

Features:

Versatile, high-quality microphone with sound characteristics similar to the SM58
Selectable dual-impedance operation
Silent magnetic reed on/off switch with lock-on option
Cardioid dynamic
Frequency response: 50 to 15,000 Hz

Type: Dynamic
Frequency Response: 50 to 15,000 Hz
Polar Pattern: Cardioid (unidirectional)--uniform with frequency, symmetrical about axis
lmpedance: Dual. Microphone rating impedance is 150 ohms (250 ohms actual) for connection to microphone inputs rated at 19 to 300 ohms and "High" for connection to high-impedance microphone inputs. Wired for low impedance as supplied.
Output Level (at 1,000 Hz): Low: Open Circuit Voltage* -56.0 dB (1.6 mV), High Open Circuit Voltage* -34.0 dB (20 mV), (*0 dB = 1 volt per Pascal (1 Pa = 94 dB SPL))
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 (with respect to pin 3).
Switch: Built-in magnetic reed on/off switch with lockplate.
Cartridge Shock Mount: Internal rubber vibration-isolator
Cable: 565SD-CN: 6.1 m (20 ft) two-conductor shielded, rubber-jacketed, detachable, with XLR connectors.
Swivel Adapter: Positive action, adjustable through 90 degrees from vertical to horizontal, permits easy removal for handheld use, suitable for mounting on stand with 5/8"-27 thread
Case: Chrome-plated die casting with steel mesh grille
Net Weight (less cable): 298 grams (10 1/2 oz)

U855QL

$130.00

Compare

U855QL

List Price: ~~$130.00~~

Your Price: $130.00

Vendor Name

U855QL

Quantity:

Audio Technica

U855QL

Designed for use as a high-quality talk-back, paging and dispatch microphone in entertainment, commercial and industrial applications, the U855QL features a versatile gooseneck design which allows for flexible positioning and dependable performance. Its tailored frequency response ensures excellent intelligibility in environments with excessive ambient noise. An XLRM-type connector insert at the base allows the microphone to be plugged directly into an XLRF-type panel jack or microphone cable.

Features:

Designed for use as a high-quality talk-back, paging & dispatch microphone in entertainment, commercial and industrial applications
Extremely rugged all-metal construction for long-lasting performance
Quick-mount design with 3-pin XLRM-type connector insert at base plugs into any standard XLRF-type surface or cable connector
Low-profile element provides uniform cardioid polar pattern with 120º acceptance angle
Easy-to-adjust, rugged gooseneck permits quick positioning
Frequency response tailored for excellent intelligibility in environments with excessive ambient noise
Polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Protective screen reduces wind noise and “popping” when used extremely close

Element: Dynamic
Polar Pattern: Cardioid
Frequency Response: 150-16,000 Hz
Open Circuit Sensitivity: –53 dB (2.2 mV) re 1V at 1 Pa
Impedance: 600 ohms
Weight: 278 g (9.8 oz)
Dimensions: 448.0 mm (17.64") long,
30.0 mm (1.18") head diameter,
19.0 mm (0.75") base diameter
Output Connector: Integral 3-pin XLRM-type

512

$135.00

Compare

512

List Price: ~~$135.00~~

Your Price: $135.00

Vendor Name

512

Quantity:

Shure

512

Close-Talk Microphone

Additional Recommended Uses:

Intercom
Voice Recognition

Designed for broadcast applications and communication systems. Suitable for environments with high levels of background noise.

Note: For proper operation, mouth-to-microphone distance should be 1 inch (2.5 cm) or less.

Features:

Frequency response tailored for voice communications
Directional microphone element
Minimal pick-up of background noise due to close-talk design
Earphone on left side only; right side is foam pad
Three conductor, shielded, straight cable with connectors
XLR male connector for mic; ¼” male phone plug for earphone
Does not require DC power for operation

Type
Dynamic, close-talking

Frequency Response (at 8 mm 5/16 in.)
50 to 15,000 Hz
View detailed

Polar Pattern
Cardioid (unidirectional) response uniform with frequency, symmetrical about axis

Impedance
Microphone rating impedance is 150 Ohms (200 Ohms actual) for connection to microphone inputs rated at 19 to 300 Ohms.

Output Level (closed-talked at 1,000 Hz)
Open-circuit voltage: -47.0 dB (4.5 mV), 0 dB=1 volt per 100 microbars
Power Level: -66.0 dB, 0 dB=1 milliwatt per 10 microbars

Hum Sensitivity (typical)
38.4 dB equivalent SPL in 1 millioersted field

Polarity
Positive pressure on diaphragm produces positive voltage on red lead and pin 2 of connector.

HEADPHONE

Type
Dynamic, open-air, left side only

Frequency Response
100 to 10,000 Hz, tailored for voice intelligibility

Impedance
300 Ohms at 1,000 Hz

Polarity
Positive voltage on cable conductor produces positive pressure.

Output Level (at 1,000 Hz)
94 dB SPL at ear with 1 mW input

MATERIAL

Cable
2.1 m (7 ft.) attached cables: one 2-conductor shielded with black 3-pin XLR connector (microphone) and one single-conductor shielded with 2-circuit phone plug (headphones).

Headset
Stainless steel and thermoplastic with foam earpads.

Net Weight
186 grams (6.5 oz.) including connectors

450SeriesII

$135.00

Compare

450SeriesII

List Price: ~~$135.00~~

Your Price: $135.00

Vendor Name

450SeriesII

Quantity:

Shure

450 Series II

Additional Recommended Uses:

Intercom
Two-Way Radio

Designed for indoor communication systems — fixed station — including police, fire, transportation, restaurant, and industrial applications.

Features:

Frequency response tailored for voice communications
Omnidirectional microphone element
Switch-selected dual impedance output
PTT switch that can be locked “On” for hands-free operation
Four conductor, shielded, bare-ended (no connector), straight cable
Adjustable height
Does not require DC power for operation

Type: Dynamic
Frequency Response: 200 to 5,000 Hz
Polar Pattern: Omnidirectional

Impedance (at 1,000 Hz)
High Impedance: 30,000 ohms
Low Impedance: 225 ohms

Recommended Load Impedance:
High Impedance: 100,000 ohms
Low Impedance: 1,000 ohms

Output Level (at 1,000 Hz, Open Circuit Voltage):
High Impedance: -35.0 dBV/Pa* (17.8 mV)
Low Impedance: -57.0 dBV/Pa* (1.4 mV)
*1 Pa = 94 dB SPL

Cable:
2.1 m (7 ft.) four-conductor, two conductors shielded,non-detachable

Case:
Two-tone gray ARMO-DUR

Dimensions:
See User Guide

Net Weight:
737 grams (1 lb., 10 oz.)

Switches:
Locking Press-to-Talk Switch: Activates microphone circuit and an external relay or control circuit. The microphone circuit is normally shorted.
Impedance Selection Switch: Double-pole, double-throw slide switch located in the base of the microphone.

565SD-CN

$147.00

Compare

565SD-CN

List Price: ~~$158.00~~

Your Price: $147.00

Vendor Name

565SD-CN

Quantity:

Shure

565SD-CN Includes 25' XLR-to-XLR Cable

Features:

Versatile, high-quality microphone with sound characteristics similar to the SM58
Selectable dual-impedance operation
Silent magnetic reed on/off switch with lock-on option
Cardioid dynamic
Frequency response: 50 to 15,000 Hz

MX410RLP/N

$161.00

Compare

MX410RLP/N

List Price: ~~$172.00~~

Your Price: $161.00

Vendor Name

MX410RLP/N

Quantity:

Shure

Microflex Modular Gooseneck Microphone

Microflex Modular Gooseneck microphones deliver unsurpassed style, flexibility and performance for conference rooms and similar applications. Offering desktop or mounted bases, wired or wireless options, and even interchangeable cartridges, it’s easy to get the perfect fit for your conferencing installation. Fully compatible with SLX Wireless Systems when used with MX890 Wireless Desktop Base.

Available Options:

MX410RLP/N: 0" (25.4 cm), light ring, less preamp (no microphone cartridge)

Features:

Available in 5" (12.7 cm), 10" (25.4 cm), and 15" (38.1 cm) lengths
Cardioid and supercardioid polar patterns
Bi-color status indicator or single color light ring
Programmable mute switch (desktop models only)
Logic input/output for remote LED and mute control
Surface-mount and wired or wireless desktop base options
CommShield Technology for improved RF filtering

Type: Condenser (electret bias)
Frequency Response: 50 to 17000 Hz
Polar Pattern: MX405/C, MX410/C, MX415/C: Cardioid, MX405/S, MX410/S, MX415/S: Supercardioid
Output Impedance: EIA Rated at 150 Ohms (170 Ohms actual)
Output Configuration: Active balanced
Sensitivity (at 1 kHz , open circuit voltage): Cardioid: -35 dBV/Pa (18 mV), Supercardioid: -34 dBV/Pa (21 mV),(1 Pascal=94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kilohm load): Cardioid: 121 dB, Supercardioid: 120 dB
Equivalent Output Noise (A-weighted): Cardioid: 28 dB SPL, Supercardioid: 27 dB SPL
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): Cardioid: 66 dB, Supercardioid: 68 dB
Dynamic Range (1 kilohm load at 1 kHz): 3 dB
Common Mode Rejection (10 Hz to 100 kHz): 45 dB minimum
Preamplifier Output Clipping Level (1% THD): -8 dBV (0.4 V)
Polarity: 3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector, 5-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector
Net Weight: MX410: 0.150 lbs (0.068 kg)
Logic Connections: LED IN: Active low (=1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V, LOGIC OUT: Active low (=1.0V), syncs up to 20mA, TTL compatible, Absolute maximum voltage: -0.7V to 50V (up to 50V through 3 kilohms)
Mute Switch Attenuation: -50 dB minimum
Cable: MX400DP: 20 ft (6.1 m) attached cable with shielded audio pair terminated at a 3-pin male XLR and three unterminated conductors for logic control
Environmental Conditions: Operating Temperature: -18 to 57 deg. C (0 to 135 deg. F), Storage Temperature: -29 to 74 deg. C (-20 to 165 deg. F), Relative Humidity: 0 to 95%
Power Requirements: 48 to 52 Vdc phantom, 8.0 mA

MX405RLP/N

$161.00

Compare

MX405RLP/N

List Price: ~~$172.00~~

Your Price: $161.00

Vendor Name

MX405RLP/N

Quantity:

Shure

MX405RLP/N

5" Shock-Mounted Miniature Gooseneck Microphone, Supercardioid, Less Preamplifier

Flexible in more ways than one, Microflex Miniature Gooseneck microphones deliver unsurpassed style and performance for conference rooms and similar applications. Offering desktop or mounted bases, wired or wireless options, and even interchangeable cartridges, it's easy to get the perfect fit for your conferencing installation. Fully compatible with SLX wireless systems.

Features:

Available in 5 inch (127 mm) and 10 inch (254 mm) lengths
Cardioid and SuperCardioid Polar Patterns
Bi-color status indicator or single color light ring
Programmable Mute switch (desktop models only)
Logic Input/Output for remote LED and Mute control
Surface-mount and wired or wireless desktop base options
CommShield Technology for improved RF filtering

Type: Condenser (Electret Bias)
Frequency Response: 50-17000 Hz
Polar Pattern:- MX405/C, MX410/C: Cardioid- MX405/S, MX410/S: SuperCardioid
Output Impedance: EIA Rated at 150 &Amp;#937; (170 &Amp;#937; actual)
Output Configuration: Active Balanced
Sensitivity (at 1 kHz , open circuit Voltage):Cardioid: -35 dBV/PA (18 mV)SuperCardioid: -34 dBV/PA (21 mV)1 Pascal=94 dB SPL
Maximum SPL (1 kHz at 1% THD, 1 k&Amp;#937; load):Cardioid: 121 dBSupercardioid: 120 dB
Equivalent Output Noise (A-Weighted):Cardioid: 28 dB SPLSupercardioid: 27 dB SPL
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz):Cardioid: 66 dBSupercardioid: 68 dB
Dynamic Range (1 k&Amp;#937; load at 1 kHz): 93 dB
Common Mode Rejection (10 Hz to 100 kHz): 45 dB minimum
Preamplifier Output Clipping Level (1% THD): -8 dBV (0.4 V)
Polarity:3-Pin XLR: Positive Sound Pressure on Diaphragm produces positive Voltage on pin 2 relative to pin 3 of output XLR Connector.5-Pin XLR: Positive Sound Pressure on Diaphragm produces positive Voltage on pin 4 relative to pin 2 of output XLR Connector.
Net Weight:MX405: 0.054 kg (0.119 lbs)MX410: 0.068 kg (0.150 lbs)MX400DP: 0.516 kg (1.138 lbs)MX400SMP (w/ Kit): 0.125 kg (0.275 lbs)
Logic Connections:LED IN: Active low (&Amp;#8804;1.0V), TTL compatible. Absolute maximum Voltage: -0.7V to 50V.LOGIC OUT: Active low (&Amp;#8804;1.0V), sinks up to 20mA, TTL compatible. Absolute maximum Voltage: -0.7V to 50V (up to 50V through 3k&Amp;#937;).
Mute Switch Attenuation: -50 dB minimum
Cable: MX400DP: 6.1 m (20 ft) attached cable with shielded Audio pair terminated at a 3-pin male XLR and three unterminated conductors for logic control
Environmental Conditions:Operating Temperature: -18-57 C (0-135 F)Storage Temperature: -29-74 C (-20-165 F)Relative Humidity: 0-95%
Power Requirements: 48-52 Vdc phantom, 8.0 mA

MX412/N

$169.40

Compare

MX412/N

List Price: ~~$181.00~~

Your Price: $169.40

Vendor Name

MX412/N

Quantity:

Shure

Microflex Standard Gooseneck Microphones

Microflex Standard Gooseneck microphones bring a whole new meaning to the word flexible with their fully adjustable gooseneck. Designed for easy replacement and available in cardioid, supercardioid and omnidirectional polar patterns, the interchangeable cartridges offer wide frequency response and accurate sound reproduction for a wide variety of applications, such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the Microflex product line for enhanced convenience and consistent sound.

Features:
Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive.

Gooseneck Microphones:
- 12" Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen

Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

Frequency Response: 50 to 17,000 Hz
Output Impedance: 180 ohms actual (EIA rated at 150 ohms)
Sensitivity (At 1,000 Hz, open circuit voltage*): Cardioid: -35.0 dBV/Pa (17.8 mV), Supercardioid: -33.5 dBV/Pa (21.1 mV), Omnidirectional: -27.5 dBV/Pa (42.2 mV), (All values -12 dB at 0 gain, *1 Pascal = 94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kilohm load): Cardioid: 124.2 dB, Supercardioid: 122.7 dB, Omnidirectional: 116.7 dB, (All values +6 dB at 0 gain)
Equivalent Output Noise (A-weighted): Cardioid: 28.0 dB SPL, Supercardioid: 26.5 dB SPL, Omnidirectional: 20.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL): Cardioid: 66.0 dB, Supercardioid: 67.5 dB, Omnidirectional: 73.5 dB
Dynamic Range at 1 kilohm load 96.2 dB: 100 dB at 0 gain
Common Mode Rejection: 45.0 dB minimum
Preamplifier Output Clipping Level (1% THD): -6.0 dBV (0.5 V), -12 dBV at 0 gain
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements: Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F), Relative Humidity: 0 to 95%

MX418/N

$169.40

Compare

MX418/N

List Price: ~~$181.00~~

Your Price: $169.40

Vendor Name

MX418/N

Quantity:

Shure

Microflex Standard Gooseneck Microphones

Microflex Standard Gooseneck microphones bring a whole new meaning to the word flexible with their fully adjustable
gooseneck. Designed for easy replacement and available in cardioid, supercardioid and omnidirectional polar patterns, the interchangeable cartridges offer wide frequency response and accurate sound reproduction for a wide variety of applications, such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the Microflex product line for enhanced convenience and consistent sound.

Features:

Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive.
Gooseneck Microphones:
- 18" Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

Frequency Response (Figure 1): 50 to 17,000 Hz
Output Impedance (at 1000 Hz): Rated at 150 Omega (180 Omega actual)
Sensitivity (At 1,000 Hz, open circuit voltage*): Cardioid: -35.0 dBV/Pa (17.8 mV), Supercardioid: -33.5 dBV/Pa (21.1 mV), Omnidirectional: -27.5 dBV/Pa (42.2 mV), (All values -12 dB at 0 gain, *1 Pascal = 94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kO load): Cardioid: 124.2 dB, Supercardioid: 122.7 dB, Omnidirectional: 116.7 dB, (All settings +6 dB at 0 gain)
Equivalent Output Noise (A-weighted): Cardioid: 28.0 dB SPL, Supercardioid: 26.5 dB SPL, Omnidirectional: 20.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL): Cardioid: 66.0 dB, Supercardioid: 67.5 dB, Omnidirectional: 73.5 dB
Dynamic Range at 1 kOmega Load: 96.2 dB, (100 dB at 0 gain)
Common Mode Rejection: 45.0 dB minimum
Mute Switch Attenuation (switched models only): 50.0 dB minimum
Preamplifier Output Clipping Level (1% THD): –6.0 dBV (0.5 V), (–12 dB at 0 gain)
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements: Operating Temperature Range: –18° C to 57° C (0° F to 135° F), Relative Humidity: 0 to 95%

55SH Series II

$179.00

Compare

55SH Series II

List Price: ~~$199.00~~

Your Price: $179.00

Vendor Name

55SH Series II

Quantity:

Shure

Iconic Unidyne Vocal Microphone

An unmistakable stage icon for 70 years, the Shure 55SH Series II Unidyne® Vocal Microphone features a signature satin chrome-plated die-cast casing for pure vintage look and feel with modern acoustic components to meet today's performance standards. This microphone is excellent for vocal pickup with its characteristic Shure presence peak.

The 55SH Series II microphone has a cardioid (unidirectional) polar pickup pattern that minimizes sound pickup from the rear of the microphone. This allows the Model 55SH Series II to be used in close proximity to loudspeakers without creating feedback problems, and it can perform under adverse acoustic conditions where omnidirectional microphones cannot.

55SH Series II Includes Swivel Stand Mount, On-Off Switch. Cable not included.

The 55SH Series II has a low-impedance balanced output designed for connection to microphone inputs rated at 75 to 300 ohms. The microphone features a cartridge shock mount to reduce stand noise, an On/Off switch, and an attached, self-tensioning, 5/8"-27 thread swivel mount. This microphone is ideal for public address or theater-stage sound systems, as well as for broadcasting, recording, and other sound applications where a stand-mounted microphone with a classic look is desirable.

Features:

Classic appearance, modern performance
Frequency response tailored for speech, vocals and instrumental music
Cardioid directional pattern for optimum performance in adverse acoustic environments
Shock-mounted cartridge minimizes stand-transmitted noise, ensures quiet operation
Rugged die cast casing for reliability under rigorous conditions
Self-tensioning swivel mount, permits tilting through 45 degrees forward and 80 degrees backward

Type: Dynamic
Frequency Response: 50 to 15,000 Hz
Polar Pattern: Cardioid (unidirectional), uniform with frequency, symmetrical about axis
Impedance: Microphone rating impedance is 150 ohms (270 ohms actual) for connection to microphone inputs rated at 75 to 300 ohms
Sensitivity (at 1,000 Hz): Open Circuit Voltage: -58.0 dBV/Pa (1.3 mV),(1 Pascal=94 dB SPL)
Polarity: Positive pressure on the diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector
Switch: Built-in On/Off switch, integral part of swivel mount, connector Three pin professional type, designed to mate with Cannon XL series, Switchcraft A3 (Q.G.) series, or equivalent
Case: Chrome-plated die casting
Net Weight: 624 grams (22 oz)

MX418SE/N

$183.40

Compare

MX418SE/N

List Price: ~~$197.00~~

Your Price: $183.40

Vendor Name

MX418SE/N

Quantity:

Shure

Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive.
Gooseneck Microphones:
- 18" In-Line Preamp, Shock & Flange Mount, 10' Side- (or Bottom-) Exit Cable, Snap-Fit Foam Windscreen
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

Frequency Response (Figure 1): 50 to 17,000 Hz
Output Impedance (at 1000 Hz): Rated at 150 Omega (180 Omega actual)
Sensitivity (At 1,000 Hz, open circuit voltage): Cardioid: -35.0 dBV/Pa (17.8 mV), Supercardioid: -33.5 dBV/Pa (21.1 mV), Omnidirectional: -27.5 dBV/Pa (42.2 mV), (All values -12 dB at 0 gain, *1 Pascal = 94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kO load): Cardioid: 124.2 dB, Supercardioid: 122.7 dB, Omnidirectional: 116.7 dB, (All settings +6 dB at 0 gain)
Equivalent Output Noise (A-weighted): Cardioid: 28.0 dB SPL, Supercardioid: 26.5 dB SPL, Omnidirectional: 20.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL): Cardioid: 66.0 dB, Supercardioid: 67.5 dB, Omnidirectional: 73.5 dB
Dynamic Range at 1 kOmega Load: 96.2 dB, (100 dB at 0 gain)
Common Mode Rejection: 45.0 dB minimum
Mute Switch Attenuation (switched models only): 50.0 dB minimum
Preamplifier Output Clipping Level (1% THD): –6.0 dBV (0.5 V), (–12 dB at 0 gain)
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements: Operating Temperature Range: –18° C to 57° C (0° F to 135° F), Relative Humidity: 0 to 95%

MX412SE/N

$183.40

Compare

MX412SE/N

List Price: ~~$197.00~~

Your Price: $183.40

Vendor Name

MX412SE/N

Quantity:

Shure

Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive.
Gooseneck Microphones:
- 12" In-Line Preamp, Shock & Flange Mount, 10' Side- (or Bottom-) Exit Cable, Snap-Fit Foam Windscreen
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

Frequency Response (Figure 1): 50 to 17,000 Hz
Output Impedance (at 1000 Hz): Rated at 150 Omega (180 Omega actual)
Sensitivity (At 1,000 Hz, open circuit voltage*): Cardioid: -35.0 dBV/Pa (17.8 mV) , Supercardioid: -33.5 dBV/Pa (21.1 mV),Omnidirectional: -27.5 dBV/Pa (42.2 mV), (All values -12 dB at 0 gain, *1 Pascal = 94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kO load): Cardioid: 124.2 dB, Supercardioid: 122.7 dB, Omnidirectional: 116.7 dB, (All settings +6 dB at 0 gain)
Equivalent Output Noise (A-weighted): Cardioid: 28.0 dB SPL, Supercardioid: 26.5 dB SPL, Omnidirectional: 20.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL): Cardioid: 66.0 dB, Supercardioid: 67.5 dB, Omnidirectional: 73.5 dB
Dynamic Range at 1 kOmega Load: 96.2 dB, (100 dB at 0 gain)
Common Mode Rejection: 45.0 dB minimum
Mute Switch Attenuation (switched models only): 50.0 dB minimum
Preamplifier Output Clipping Level (1% THD): –6.0 dBV (0.5 V), (–12 dB at 0 gain)
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements: Operating Temperature Range: –18° C to 57° C (0° F to 135° F), Relative Humidity: 0 to 95%

MX412S/N

$191.80

Compare

MX412S/N

List Price: ~~$205.00~~

Your Price: $191.80

Vendor Name

MX412S/N

Quantity:

Shure

Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive.
Gooseneck Microphones:
- 12" Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen, Mute Switch, LED Indicator
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

Frequency Response (Figure 1): 50 to 17,000 Hz
Output Impedance (at 1000 Hz): Rated at 150 Omega (180 Omega actual)
Sensitivity (At 1,000 Hz, open circuit voltage*): Cardioid: -35.0 dBV/Pa (17.8 mV), Supercardioid: -33.5 dBV/Pa (21.1 mV), Omnidirectional: -27.5 dBV/Pa (42.2 mV, (All values -12 dB at 0 gain, *1 Pascal = 94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kO load): Cardioid: 124.2 dB, Supercardioid: 122.7 dB, Omnidirectional: 116.7 dB, (All settings +6 dB at 0 gain)
Equivalent Output Noise (A-weighted): Cardioid: 28.0 dB SPL, Supercardioid: 26.5 dB SPL, Omnidirectional: 20.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL): Cardioid: 66.0 dB, Supercardioid: 67.5 dB, Omnidirectional: 73.5 dB
Dynamic Range at 1 kOmega Load: 96.2 dB, (100 dB at 0 gain)
Common Mode Rejection: 45.0 dB minimum
Mute Switch Attenuation (switched models only): 50.0 dB minimum
Preamplifier Output Clipping Level (1% THD): –6.0 dBV (0.5 V), (–12 dB at 0 gain)
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements: Operating Temperature Range: –18° C to 57° C (0° F to 135° F), Relative Humidity: 0 to 95%

MX418S/N

$191.80

Compare

MX418S/N

List Price: ~~$205.00~~

Your Price: $191.80

Vendor Name

MX418S/N

Quantity:

Shure

Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive.
Gooseneck Microphones:
- 18" Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen, Mute Switch, LED Indicator
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

MX410LP/C

$207.20

Compare

MX410LP/C

List Price: ~~$221.00~~

Your Price: $207.20

Vendor Name

MX410LP/C

Quantity:

Shure

MX410LP/C: 10" (25.4 cm), bi-color status indicator, less preamp (cardioid polar pattern)

Features:

Available in 5" (12.7 cm), 10" (25.4 cm), and 15" (38.1 cm) lengths
Cardioid and supercardioid polar patterns
Bi-color status indicator or single color light ring
Programmable mute switch (desktop models only)
Logic input/output for remote LED and mute control
Surface-mount and wired or wireless desktop base options
CommShield Technology for improved RF filtering

Type: Condenser (electret bias)
Frequency Response: 50 to 17000 Hz
Polar Pattern: MX405/C, MX410/C, MX415/C: Cardioid
Output Impedance: EIA Rated at 150 Ohms (170 Ohms actual)
Output Configuration: Active balanced
Sensitivity (at 1 kHz , open circuit voltage): Cardioid: -35 dBV/Pa (18 mV), (1 Pascal=94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kilohm load): Cardioid: 121 dB
Equivalent Output Noise (A-weighted): Cardioid: 28 dB SPL
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): Cardioid: 66 dB
Dynamic Range (1 kilohm load at 1 kHz): 3 dB
Common Mode Rejection (10 Hz to 100 kHz): 45 dB minimum
Preamplifier Output Clipping Level (1% THD): -8 dBV (0.4 V)
Polarity: 3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector, 5-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector
Net Weight: MX410: 0.150 lbs (0.068 kg)
Logic Connections: LED IN: Active low (=1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V, LOGIC OUT: Active low (=1.0V), syncs up to 20mA, TTL compatible, Absolute maximum voltage: -0.7V to 50V (up to 50V through 3 kilohms)
Mute Switch Attenuation: -50 dB minimum
Cable: MX400DP: 20 ft (6.1 m) attached cable with shielded audio pair terminated at a 3-pin male XLR and three unterminated conductors for logic control
Environmental Conditions: Operating Temperature: -18 to 57 deg. C (0 to 135 deg. F), Storage Temperature: -29 to 74 deg. C (-20 to 165 deg. F), Relative Humidity: 0 to 95%
Power Requirements: 48 to 52 Vdc phantom, 8.0 mA

MX405LP/C

$207.20

Compare

MX405LP/C

List Price: ~~$221.00~~

Your Price: $207.20

Vendor Name

MX405LP/C

Quantity:

Shure

MX405LP/C

5" Shock-Mounted Miniature Gooseneck Microphone, Cardioid, Less Preamplifier

Flexible in more ways than one, Microflex Miniature Gooseneck microphones deliver unsurpassed style and performance for conference rooms and similar applications. Offering desktop or mounted bases, wired or wireless options, and even interchangeable cartridges, it's easy to get the perfect fit for your conferencing installation. Fully compatible with SLX wireless systems.

Features: