WLT transmitter with lavalier clip-on microphone (LT)
Features:
Ideal entry-level systems — all the advantages and freedom of wireless operation without cumbersome cords
Excellent high-fidelity audio
VHF (170-216 MHz) operations for reliable, interference-free performance
150+ ft. typical operating range — up to 300+ ft. line-of-sight
Easy to use — simply plug into your audio mixer or amplifier in place of your wired microphone or instrument
Advanced audio processing circuitry for a wide dynamic range — no overloading for loud inputs or background hiss during quiet use
Complete controls and connections for easy operation
Front panel Power On/Off switch and Power On LED
Back panel ¼” audio output jack and DC power input jack for supplied AC/DC adaptor
Special circuitry to eliminate transmitter on/off “pop” noise
WGT Bodypack Transmitters:
Choice of instrument, Headmic™ or lapel microphone bodypack transmitter for use with LM-14O omnidirectional or LM-14U unidirectional lapel microphone or Headmic™ Series microphones
Off/Standby/On switch allows convenient audio muting with the transmitter on
Input level adjust
Locking 3.5mm jack
LED status indicator flashes once for unit on, lights steady for low-battery alert
The Audio-Technica 200 Series FreeWay Wireless Microphone System offers a reliable, cost-effective alternative to hardwired microphones. The system is available in a variety of configurations and this system includes an ATW-R250 VHF receiver and ATW-T201 bodypack transmitter.
The ATW-R250 VHF receiver is a single channel VHF receiver with dual dipole antennas for greater range and minimal RF noise. The receiver also features Power, AF and RF LED indicators on the front panel. The rear panel features a 1/4" phone output jack.
The ATW-T201 bodypack transmitter is a rugged miniature unit. The ATW-201 operates on a single 9V battery and features switchable RF output for increasing range when necessary.
The FreeWay systems are ideal for public address, speech and mobile DJ use.
Reliable VHF Transmission The ATW-R250 receiver features a VHF dipole antenna system that maximizes range while minimizing interference.
Bodypack Transmitter The bodypack transmitter is lightweight and portable. Compatible Audio-Technica lavalier and head-worn microphones are available for use with the transmitter.
Dual Output Power Switch The bodypack transmitter features switchable output power for increased range.
System: Type of System: VHF Bodypack RF Carrier Frequency Range: VHF high band, 169 MHz to 172 MHz Approx. Working Range: 200' (typical) Overall Frequency Response: 80Hz to 13kHz Signal-to-Noise Ratio: 80dB at 10kHz deviation (IEC-weighted), maximum modulation 15 kHz Of Channels: Single Channel (T8 / 178.905 MHz) Of Simultaneous Systems: Up to three
Receiver: Type of Receiver: ATW-R250 Type of Outputs: 1/4" Phone Headphone Monitoring: No Power Requirements: 100-240VAC (50/60 Hz) to 12VDC 1A (center positive) switched mode external power supply Battery Type/Approx. Life: No Display: No Mounting Options: Not Specified By Manufacturer Antenna Type: Internal Dimensions: 7.48 x 1.65 x 5.12" (190 x 42 x 130mm) Weight: 11.0 oz (311 g) Transmitter: Type of Transmitter: VHF Bodypack Type of Input Connector: TA3 High impedance, low impedance, bias Type of Microphone: Not Included Polar Pattern: No Applicable Interchangeable Mic Heads: No Battery Type/Approx. Life: 9V Alkaline Approximately 15 hours in High position Approximately 20 hours in Low position (depending on battery type and use pattern) Mute Switch: Not Specified by Manufacturer Level Control: Not Specified by Manufacturer Antenna Type: Internal Display: Power LED Dimensions (WxDxH): 2.56 x 1.00 x 4.33" (65.0 x 25.4 x 110mm) Weight: 2.8 oz (78 g) (without battery)
ATW-R250 receiver and ATW-T201 transmitter. Select a Wireless Essentials microphone or cable to complete the system.
Audio-Technica’s Freeway 200 Series Wireless Systems are designed to provide reliable performance, easy setup and clear, natural sound quality. Available in handheld, headworn, guitar, lavalier and body-pack configurations, the 200 Series Freeway Wireless Systems are single-channel, fixed-frequency systems available in three VHF frequencies (169.505, 170.245, and 171.905 MHz).
Each 200 Series Freeway Wireless System includes the ATW-R250 receiver and either a body-pack transmitter or handheld microphone/ transmitter. The ATW-R250 is a non-diversity, single-channel receiver with advanced dipole antenna design for extended operating range, which improves operation by providing a ground element in addition to the usual signal element. The ATW-R250 also offers volume control along with AF Peak, RF and Power indicator lights.
Features:
Easy operation and clear, natural sound quality
Reliable performance and durable construction
Advanced dipole antenna system for extended operating range
Power, RF, and AF Peak indicators
Volume control, ¼” output jack and space-saving power supply
Rugged unidirectional dynamic element on handheld microphone/transmitter
Variable microphone trim control and easily accessible On/Standby/Off switch on transmitters
Professional locking connector on UniPak body-pack transmitter
Available in 7 system configurations
Overall System Specifications: Operating Frequency: VHF high band, 169 MHz to 172 MHz Number of Channels: Fixed channel Frequency Stability: ±0.005% Modulation Mode: FM Maximum Deviation: ±15 kHz Operating Range: 200' typical Operating Temperature Range: 40° F (4° C) to 110° F (43° C) Frequency Response: 80 Hz to 13 kHz
Receiver Specifications: Receiving System: Non-diversity, single-channel, dual antenna system Image Rejection: 50 dB minimum Signal-to-noise Ratio: 80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz Total Harmonic Distortion: <=1% (10 kHz deviation at 1 kHz) Sensitivity: 20 dBµV for 60 dB S/N (IEC-weighted) Audio Output: 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load) Output Connector: 1/4" TS ("mono") phone jack Power Supply: 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply Dimensions: 7.48" (190.0 mm) W x 1.65" (42.0 mm) H x 5.12" (130.0 mm) D Net Weight: 11.0 oz (311 g) Accessory Included: Power supply
Body-pack Transmitter Specifications: RF Power Output: 10 mW High position, 2 mW Low position, typical Spurious Emissions: Under federal regulations Dynamic Range: >=90 dB, A-weighted Input Connections: High impedance, low impedance, bias Battery: 9V (NEDA type 1604) alkaline, not included Current Consumption: 30 mA typical Battery Life: Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern) Dimensions: 2.56" (65.0 mm) W x 4.33" (110.0 mm) H x 1.00" (25.4 mm) D Net Weight: 2.8 oz (78 g) (without battery)
Handheld Transmitter Specifications: RF Power Output: 10 mW High position, 2 mW Low position, typical Spurious Emissions: Under federal regulations Dynamic Range: >=90 dB, A-weighted Microphone Element: Dynamic unidirectional Battery: 9V (NEDA type 1604) alkaline, not included Current Consumption: 30 mA typical Battery Life: Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern) Dimensions: 9.50" (241.3 mm) long, 2.10" (53.3 mm) maximum diameter Net Weight: 12.7 oz (360 g) (without battery) Accessory Included: AT8456a Quiet-Flex stand clamp
ATW-R800 receiver and ATW-T801 UniPak transmitter. Select a Wireless Essentials microphone or cable to complete the system
Featuring sleek, stackable, contemporary styling, Audio-Technica's System 8 Wireless Systems are designed for reliable performance, easy setup and clear, natural sound quality. Available in handheld, headworn, guitar, lavalier and body-pack configurations, these single-channel, fixed-frequency systems are available in three traveling VHF frequencies (169.505, 170.245, and 171.905 MHz). Features:
Easy operation and clear, natural sound quality
Reliable performance and durable construction
Advanced dipole antenna system for extended operating range
Power, RF, and AF Peak indicators
Volume control, 1/4" output jack and user-adjustable squelch
Rugged unidirectional dynamic element on handheld microphone/transmitter
Variable microphone trim control and multi-color battery/power indicator, AA operation on transmitters
Professional locking connector on UniPak body-pack transmitter
Available in 7 system configurations
OVERALL SYSTEM SPECIFICATIONS Operating Frequency: VHF highband, 169 MHz to 172 MHz Modulation Mode: FM Maximum Deviation: +/-10 kHz Dynamic Range: >/=90 dB (A-weighted), typical Total Harmonic Distortion: <1% (at 1 kHz, +/-10 kHz deviation) Operating Range: 200' (60 m) typical Open range environment with no interfering signals Operating Temperature Range: 40° F (4° C) to 110° F (43° C) Battery performance may be reduced at very low temperatures Frequency Response: 80 Hz to 13 kHz
RECEIVER SPECIFICATIONS Receiving System: Non-diversity, single-channel, dual antenna system Image Rejection: 50 dB minimum RF Sensitivity: 20 dBuV at 60 dB S/N ratio (50 ohms termination) Audio Output: 1/4" (6.3 mm), unbalanced: 700 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load), nominal Power Supply: 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply Dimensions: 7.48" (190.0 mm) W x 1.82" (46.2 mm) H x 5.06" (128.5 mm) D Net Weight: 11.8 oz (335 grams) Accessory Included: Power supply
BODY-PACK TRANSMITTER SPECIFICATIONS RF Power Output: 10 mW Spurious Emissions: Following federal and national regulations Input Connections: Four-pin Locking Connector Pin 1: GND Pin 2: INST INPUT Pin 3: MIC INPUT Pin 4: DC BIAS +9V Batteries: Two 1.5V AA Alkaline (not included) Battery Life: 8 hours (alkaline) Depending on battery type and use pattern Dimensions: 2.76" (70.2 mm) W x 4.08" (103.7 mm) H x 0.98" (24.9 mm) D Net Weight: 3.0 oz (84.5 grams) (without battery)
HANDHELD TRANSMITTER SPECIFICATIONS RF Power Output: 10 mW Spurious Emissions: Following federal and national regulations Batteries: Two 1.5V AA Alkaline (not included) Battery Life: 8 hours (alkaline) Depending on battery type and use pattern Dimensions: 9.91" (251.8 mm) long, 2.11" (53.5 mm) diameter Net Weight: 9.2 oz (260 grams) (without battery) Accessory Included: AT8456a Quiet-Flex stand clamp
The Audio-Technica 200 Series FreeWay Wireless Microphone System offers a reliable, cost-effective alternative to hardwired microphones. The system is available in a variety of configurations and this system includes an ATW-R250 VHF receiver and ATW-T201 bodypack transmitter.
The ATW-R250 VHF receiver is a single channel VHF receiver with dual dipole antennas for greater range and minimal RF noise. The receiver also features Power, AF and RF LED indicators on the front panel. The rear panel features a 1/4" phone output jack.
The ATW-T201 bodypack transmitter is a rugged miniature unit. The ATW-201 operates on a single 9V battery and features switchable RF output for increasing range when necessary.
The FreeWay systems are ideal for public address, speech and mobile DJ use.
Reliable VHF Transmission The ATW-R250 receiver features a VHF dipole antenna system that maximizes range while minimizing interference. Bodypack Transmitter The bodypack transmitter is lightweight and portable. Compatible Audio-Technica lavalier and head-worn microphones are available for use with the transmitter. Dual Output Power Switch The bodypack transmitter feature switchable output power for increased range.
System: Type of System: VHF Bodypack RF Carrier Frequency Range: VHF high band, 169 MHz to 172 MHz Approx. Working Range: 200'(typical) Overall Frequency Response: 80Hz to 13kHz Signal-to-Noise Ratio: 80dB at 10kHz deviation (IEC-weighted), maximum modulation 15 kHz Of Channels: Single Channel (T3 / 170.245 MHz) Of Simultaneous Systems: Up to three
Receiver: Type of Receiver: ATW-R250 Type of Outputs: 1/4" Phone Headphone Monitoring: No Power Requirements: 100-240VAC (50/60 Hz) to 12VDC 1A (center positive) switched mode external power supply Battery Type/Approx. Life: No Display: No Mounting Options: Not Specified By Manufacturer Antenna Type: Internal Dimensions: 7.48 x 1.65 x 5.12" (190 x 42 x 130mm) Weight: 11.0 oz (311 g)
Transmitter: Type of Transmitter: VHF Bodypack Type of Input Connector: High impedance, low impedance, bias Type of Microphone: Not Included Polar Pattern: No Applicable Interchangeable Mic Heads: No Battery Type/Approx. Life: 9V Alkaline Approximately 15 hours in High position Approximately 20 hours in Low position (depending on battery type and use pattern) Mute Switch: Not Specified by Manufacturer Level Control: Not Specified by Manufacturer Antenna Type: Internal Display: Power LED Dimensions (WxDxH): 2.56 x 1.00 x 4.33" (65.0 x 25.4 x 110mm) Weight: 2.8 oz (78 g) (without battery) Level Control: Not Specified by Manufacturer Antenna Type: Internal Display: Power LED Dimensions (WxDxH): 2.56 x 1.00 x 4.33" (65.0 x 25.4 x 110mm) Weight: 2.8 oz (78 g) (without battery)
The Audio-Technica 200 Series FreeWay Wireless Microphone System offers a reliable, cost-effective alternative to hardwired microphones. The system is available in a variety of configurations and this system includes an ATW-R250 VHF receiver and ATW-T201 bodypack transmitter.
The ATW-R250 VHF receiver is a single channel VHF receiver with dual dipole antennas for greater range and minimal RF noise. The receiver also features Power, AF and RF LED indicators on the front panel. The rear panel features a 1/4" phone output jack.
The ATW-T201 bodypack transmitter is a rugged miniature unit. The ATW-201 operates on a single 9V battery and features switchable RF output for increasing range when necessary.
The FreeWay systems are ideal for public address, speech and mobile DJ use. Reliable VHF Transmission The ATW-R250 receiver features a VHF dipole antenna system that maximizes range while minimizing interference.
Bodypack Transmitter The bodypack transmitter is lightweight and portable. Compatible Audio-Technica lavalier and head-worn microphones are available for use with the transmitter. Dual Output Power Switch The bodypack transmitter feature switchable output power for increased range.
System: Type of System: VHF Bodypack RF Carrier Frequency Range: VHF high band, 169 MHz to 172 MHz Approx. Working Range: 200' (typical) Overall Frequency Response: 80Hz to 13kHz Signal-to-Noise Ratio: 80dB at 10kHz deviation (IEC-weighted), maximum modulation 15 kHz Of Channels: Single Channel (T2 / 169.505 MHz) Of Simultaneous Systems: Up to three
Receiver: Type of Receiver: ATW-R250 Type of Outputs: 1/4" Phone Headphone Monitoring: No Power Requirements: 100-240VAC (50/60 Hz) to 12VDC 1A (center positive) switched mode external power supply Battery Type/Approx. Life: No Display: No Mounting Options: Not Specified By Manufacturer Antenna Type: Internal Dimensions: 7.48 x 1.65 x 5.12" (190 x 42 x 130mm) Weight: 11.0 oz (311 g)
Transmitter: Type of Transmitter: VHF Bodypack Type of Input Connector: High impedance, low impedance, bias Type of Microphone: Not Included Polar Pattern: No Applicable Interchangeable Mic Heads: No Battery Type/Approx. Life: 9V Alkaline Approximately 15 hours in High position Approximately 20 hours in Low position (depending on battery type and use pattern) Mute Switch: Not Specified by Manufacturer Level Control: Not Specified by Manufacturer Antenna Type: Internal Display: Power LED Dimensions (WxDxH): 2.56 x 1.00 x 4.33" (65.0 x 25.4 x 110mm) Weight: 2.8 oz (78 g) (without battery)
The Nady DKW-8 GT wireless system represents an unprecedented value in a single-channel UHF instrument system with interference-free operation in any application or locale on select UHF frequencies from 794-805 Mhz. Compact, simple set up to operate simply plug in instead of your instrument cable. All the advantages and freedom of wireless operation without cumbersome cords.
The DKW-8U GT features Nady's proprietary companding circuitry for an industry best 120dB dynamic range, and the clearest, most natural sound available with 150+ feet typical operating range up to 300+ feet line-of-sight. Also features power, signal, AF LED status indicators, and an adjustable audio output level for optimal sound. Externally powered by DC power adapter (included).
ATW-R250 receiver, ATW-T201 transmitter and Hi-Z instrument input cable.
Audio-Technica’s Freeway 200 Series Wireless Systems are designed to provide reliable performance, easy setup and clear, natural sound quality. Available in handheld, headworn, guitar, lavalier and body-pack configurations, the 200 Series Freeway Wireless Systems are single-channel, fixed-frequency systems available in three VHF frequencies (169.505, 170.245, and 171.905 MHz).
Each 200 Series Freeway Wireless System includes the ATW-R250 receiver and either a body-pack transmitter or handheld microphone/ transmitter. The ATW-R250 is a non-diversity, single-channel receiver with advanced dipole antenna design for extended operating range, which improves operation by providing a ground element in addition to the usual signal element. The ATW-R250 also offers volume control along with AF Peak, RF and Power indicator lights.
Features:
Easy operation and clear, natural sound quality
Reliable performance and durable construction
Advanced dipole antenna system for extended operating range
Power, RF, and AF Peak indicators
Volume control, ¼” output jack and space-saving power supply
Rugged unidirectional dynamic element on handheld microphone/transmitter
Variable microphone trim control and easily accessible On/Standby/Off switch on transmitters
Professional locking connector on UniPak body-pack transmitter
Available in 7 system configurations
Overall System Specifications: Operating Frequency: VHF high band, 169 MHz to 172 MHz Number of Channels: Fixed channel Frequency Stability: ±0.005% Modulation Mode: FM Maximum Deviation: ±15 kHz Operating Range: 200' typical Operating Temperature Range: 40° F (4° C) to 110° F (43° C) Frequency Response: 80 Hz to 13 kHz
Receiver Specifications: Receiving System: Non-diversity, single-channel, dual antenna system Image Rejection: 50 dB minimum Signal-to-noise Ratio: 80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz Total Harmonic Distortion: <=1% (10 kHz deviation at 1 kHz) Sensitivity: 20 dBµV for 60 dB S/N (IEC-weighted) Audio Output: 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load) Output Connector: 1/4" TS ("mono") phone jack Power Supply: 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply Dimensions: 7.48" (190.0 mm) W x 1.65" (42.0 mm) H x 5.12" (130.0 mm) D Net Weight: 11.0 oz (311 g) Accessory Included: Power supply
Body-pack Transmitter Specifications: RF Power Output: 10 mW High position, 2 mW Low position, typical Spurious Emissions: Under federal regulations Dynamic Range: >=90 dB, A-weighted Input Connections: High impedance, low impedance, bias Battery: 9V (NEDA type 1604) alkaline, not included Current Consumption: 30 mA typical Battery Life: Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern) Dimensions: 2.56" (65.0 mm) W x 4.33" (110.0 mm) H x 1.00" (25.4 mm) D Net Weight: 2.8 oz (78 g) (without battery)
Handheld Transmitter Specifications: RF Power Output: 10 mW High position, 2 mW Low position, typical Spurious Emissions: Under federal regulations Dynamic Range: >=90 dB, A-weighted Microphone Element: Dynamic unidirectional Battery: 9V (NEDA type 1604) alkaline, not included Current Consumption: 30 mA typical Battery Life: Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern) Dimensions: 9.50" (241.3 mm) long, 2.10" (53.3 mm) maximum diameter Net Weight: 12.7 oz (360 g) (without battery) Accessory Included: AT8456a Quiet-Flex stand clamp
ATW-R800 receiver and ATW-T801 UniPak transmitter with AT-GcW guitar/instrument input cable.
Featuring sleek, stackable, contemporary styling, Audio-Technica's System 8 Wireless Systems are designed for reliable performance, easy setup and clear, natural sound quality. Available in handheld, headworn, guitar, lavalier and body-pack configurations, these single-channel, fixed-frequency systems are available in three traveling VHF frequencies (169.505, 170.245, and 171.905 MHz).
Features:
Easy operation and clear, natural sound quality
Reliable performance and durable construction
Advanced dipole antenna system for extended operating range
Power, RF, and AF Peak indicators
Volume control, 1/4" output jack and user-adjustable squelch
Rugged unidirectional dynamic element on handheld microphone/transmitter
Variable microphone trim control and multi-color battery/power indicator, AA operation on transmitters
Professional locking connector on UniPak body-pack transmitter
Available in 7 system configurations
OVERALL SYSTEM SPECIFICATIONS Operating Frequency: VHF highband, 169 MHz to 172 MHz Modulation Mode: FM Maximum Deviation: +/-10 kHz Dynamic Range: >/=90 dB (A-weighted), typical Total Harmonic Distortion: <1% (at 1 kHz, +/-10 kHz deviation) Operating Range: 200' (60 m) typical Open range environment with no interfering signals Operating Temperature Range: 40° F (4° C) to 110° F (43° C) Battery performance may be reduced at very low temperatures Frequency Response: 80 Hz to 13 kHz RECEIVER SPECIFICATIONS Receiving System: Non-diversity, single-channel, dual antenna system Image Rejection: 50 dB minimum RF Sensitivity: 20 dBuV at 60 dB S/N ratio (50 ohms termination) Audio Output: 1/4" (6.3 mm), unbalanced: 700 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load), nominal Power Supply: 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply Dimensions: 7.48" (190.0 mm) W x 1.82" (46.2 mm) H x 5.06" (128.5 mm) D Net Weight: 11.8 oz (335 grams) Accessory Included: Power supply BODY-PACK TRANSMITTER SPECIFICATIONS RF Power Output: 10 mW Spurious Emissions: Following federal and national regulations Input Connections: Four-pin Locking Connector Pin 1: GND Pin 2: INST INPUT Pin 3: MIC INPUT Pin 4: DC BIAS +9V Batteries: Two 1.5V AA Alkaline (not included) Battery Life: 8 hours (alkaline) Depending on battery type and use pattern Dimensions: 2.76" (70.2 mm) W x 4.08" (103.7 mm) H x 0.98" (24.9 mm) D Net Weight: 3.0 oz (84.5 grams) (without battery)
HANDHELD TRANSMITTER SPECIFICATIONS RF Power Output: 10 mW Spurious Emissions: Following federal and national regulations Batteries: Two 1.5V AA Alkaline (not included) Battery Life: 8 hours (alkaline) Depending on battery type and use pattern Dimensions: 9.91" (251.8 mm) long, 2.11" (53.5 mm) diameter Net Weight: 9.2 oz (260 grams) (without battery) Accessory Included: AT8456a Quiet-Flex stand clamp
The Audio-Technica 200 Series FreeWay Wireless Microphone System offers a reliable, cost-effective alternative to hardwired microphones. The system is available in a variety of configurations and this system includes an ATW-R200 VHF receiver, ATW-T201 bodypack transmitter and AT-GCW 1/4" phone instrument cable for guitar, keyboards, etc.
The ATW-R200 VHF receiver is a single channel VHF receiver with dual dipole antennas for greater range and minimal RF noise. The receiver also features Power, AF and RF LED indicators on the front panel. The rear panel features a 1/4" phone output jack.
The ATW-T201 bodypack transmitter is a rugged miniature unit with 1/4" phone instrument cable for adapting electric guitars keyboards, etc. The ATW-201 operates on a single 9V battery and features switchable RF output for increasing range when necessary.
The Audio-Technica FreeWay wireless instrument system offers reliable wireless operation for guitarists and keyboard players on stage.
Reliable VHF Transmission The ATW-R200 receiver features a VHF dipole antenna system that maximizes range while minimizing interference.
Bodypack Transmitter with Guitar Cable The bodypack transmitter includes the AT-GCW guitar cable for connecting electric guitars, keyboards, etc.
Dual Output Power Switch The bodypack transmitter feature switchable output power for increased range.
System: Type of System: VHF Bodypack Lavalier RF Carrier Frequency Range: VHF high band, 169MHz to 172MHz Approx. Working Range: 200-feet (typical) Overall Frequency Response: 80Hz to 13kHz Signal-to-Noise Ratio: 80dB at 10kHz deviation (IEC-weighted), maximum modulation 15 kHz Of Channels: Single Channel (T2 / 169.505 MHz) Of Simultaneous Systems: Up to three
Receiver: Type of Receiver: ATW-R250 Type of Outputs: 1/4" Phone Headphone Monitoring: No Power Requirements: 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply Battery Type/Approx. Life: No Display: No Mounting Options: Not Specified By Manufacturer Antenna Type: Internal Dimensions (WxHxD): 7.48 x 1.65 x 5.12" (190 x 42 x 130mm) Weight: 11.0 oz (311 g) Transmitter: Type of Transmitter: VHF Bodypack Type of Input Connector: High impedance, low impedance, bias Type of Microphone: ATW-GC Guitar Cable Polar Pattern: Not Applicable Interchangeable Mic Heads: No Battery Type/Approx. Life: 9V Alkaline Approximately 15 hours in High position Approximately 20 hours in Low position (depending on battery type and use pattern) Mute Switch: Not Specified by Manufacturer Level Control: Not Specified by Manufacturer Antenna Type: Internal Display: Power LED Dimensions (WxDxH): 2.56 x 1.00 x 4.33" (65.0 x 25.4 x 110mm) Weight: 2.8 oz (78 g) (without battery)
Audio-Technica's UniPak system is designed to provide reliable performance, easy setup and clear, natural sound quality. This professional VHF wireless system includes an ATW-R250 receiver, ATW-T201 transmitter and Hi-Z instrument input cable. A novel dipole antenna system on the receiver improves operation by providing a ground element in addition to the usual signal element. The ATW-251/G-T3 has a traveling frequency of 170.245 MHz. Features:
Easy operation and clear, natural sound quality
Reliable performance and durable construction
Advanced dipole antenna system for extended operating range
Power, RF, and AF Peak indicators
Volume control, 1/4" output jack and space-saving power supply
Professional locking connector on UniPak body-pack transmitter
The Audio-Technica 200 Series FreeWay Wireless Microphone System offers a reliable, cost-effective alternative to hardwired microphones. The system is available in a variety of configurations and this system includes an ATW-R200 VHF receiver, ATW-T201 bodypack transmitter and AT-GCW 1/4" phone instrument cable for guitar, keyboards, etc.
The ATW-R200 VHF receiver is a single channel VHF receiver with dual dipole antennas for greater range and minimal RF noise. The receiver also features Power, AF and RF LED indicators on the front panel. The rear panel features a 1/4" phone output jack.
The ATW-T201 bodypack transmitter is a rugged miniature unit with 1/4" phone instrument cable for adapting electric guitars keyboards, etc. The ATW-201 operates on a single 9V battery and features switchable RF output for increasing range when necessary.
The Audio-Technica FreeWay wireless instrument system offers reliable wireless operation for guitarists and keyboard players on stage.
Reliable VHF Transmission The ATW-R200 receiver features a VHF dipole antenna system that maximizes range while minimizing interference. Bodypack Transmitter with Guitar Cable The bodypack transmitter includes the AT-GCW guitar cable for connecting electric guitars, keyboards, etc.
Dual Output Power Switch The bodypack transmitter feature switchable output power for increased range
System: Type of System: VHF Bodypack Lavalier RF Carrier Frequency Range: VHF high band, 169MHz to 172MHz Approx. Working Range: 200-feet (typical) Overall Frequency Response: 80Hz to 13kHz Signal-to-Noise Ratio: 80dB at 10kHz deviation (IEC-weighted), maximum modulation 15 kHz Of Channels: Single Channel (T8 / 171.905 MHz) Of Simultaneous Systems: Up to three
Receiver: Type of Receiver: ATW-R250 Type of Outputs: 1/4" Phone Headphone Monitoring: No Power Requirements: 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply Battery Type/Approx. Life: No Display: No Mounting Options: Not Specified By Manufacturer Antenna Type: Internal Dimensions (WxHxD): 7.48 x 1.65 x 5.12" (190 x 42 x 130mm) Weight: 11.0 oz (311 g)
Transmitter: Type of Transmitter: VHF Bodypack Type of Input Connector: High impedance, low impedance, bias Type of Microphone: ATW-GC Guitar Cable Polar Pattern: Not Applicable Interchangeable Mic Heads: No Battery Type/Approx. Life: 9V Alkaline Approximately 15 hours in High position Approximately 20 hours in Low position (depending on battery type and use pattern) Mute Switch: Not Specified by Manufacturer Level Control: Not Specified by Manufacturer Antenna Type: Internal Display: Power LED Dimensions (WxDxH): 2.56 x 1.00 x 4.33" (65.0 x 25.4 x 110mm) Weight: 2.8 oz (78 g) (without battery)
The Nady Encore II GT is loaded with top professional operating features. Designed specifically forwireless, cable-free transmission of guitar or bass, this system also works with other instrumentsthat have standard 1/4" instrument jacks.
Encore II VHF Receiver Available on selected frequencies in the VHF high-band (171-216 MHz) for interference-free, long-range performance. Convenient half-rack receiver design with retractable front panel antennas. Includes both RF and AF 5-LED displays for monitoring incoming signal strength and audio level. The receiver has balanced XLR and unbalanced adjustable 1/4" jack outputs to work with any amplifier, mixer or PA system. Includes a unique snap-out panel locking tabs for single receiver or dual receiver (side-by-side) optional rack mounting.
The Encore II receiver includes Nady's proprietary DigiTRU Diversityâ„¢ digital processing circuitry to eliminate dropouts and maximize operating range. A specially designed circuit provides noiseless transmitter ON/OFF switching to avoid "pop".
WGT-15 Bodypack Transmitter The included WGT-15 transmitter connects directly to your guitar, bass or other instrument and clips ontothe strap or your belt for convenient access. A locking 3.5mm mini-jack provides a secure connection for the removable microphone instrument cable. An OFF/STANDBY/ON swith allows convenient audio muting withthe transmitter "ON". There is also an easily accessible input level adjust control for optimum sound. A low battery LED indicator flashes once for unit "ON"; lights steady for low battery alert.Operates on a single 9V alakline battery operation (15+ hours).
Unprecedented value in a full-featured, single-channel UHF wireless mic system
Interference-free operation in any application or locale on select UHF frequencies
Half-rack receiver design with folding front panel dual antennas
Unique snap-out panel locking tabs for optional single receiver rackmounting or dual receiver (side-by-side) rackmounting
Tone Squelch™ for locking out potential interference
Nady’s proprietary companding circuitry for an industry-best 120dB dynamic range, and the clearest, most natural sound available
UHF-4 receiver with DigiTRU Diversity™ for maximum range and dropout protection; full LED indicators; ¼” unbalanced and XLR balanced outputs; special circuitry for noiseless transmitter On/Off switching
Choice of two transmitters: UH-4 or UB-4
UB-4 Bodypack Transmitter:
Choice of instrument, headworn or lavalier mic operating modes in a single bodypack transmitter
Off/Standby/On switch allows convenient audio muting while transmitter on
Status LED indicator flashes once for Unit On; lights steady for low-battery alert
Locking 3.5mm mini-jack provides secure connection for removable microphone or instrument cable
The Shure Beta 57A is a high output supercardioid dynamic microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off–axis tone coloration.
Excellent for acoustic and electric instruments as well as for vocals, the extremely versatile Beta 57A dynamic microphone provides optimal warmth and presence. Typical applications include drums, guitar amplifiers, brass, woodwinds and vocals.
Features:
Tailored frequency response provides drums, guitars, vocals, and horns with studio quality sound
Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off–axis sound
Hardened steel mesh grille that facilitates use of proximity effect and resists wear and abuse
Neodymium magnet for high signal–to–noise ratio output
Minimally affected by varying load impedance
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
Legendary Shure quality and reliability
Type: Dynamic (moving coil) Frequency Response: 50 to 16,000 Hz Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency. Output Level (at 1,000 Hz): Open Circuit Voltage -51 dBV/Pa* (2.8 mV) , *1 Pa = 94 dB SPL Impedance: Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z. Phasing: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3. Connector: Three-pin professional audio connector (male XLR type). Case: Silver blue enamel-painted die cast metal with hardened, matte-finished steel mesh grille. Adjustable Stand Adapter: Slip-in, adjustable through 180 degrees, with standard 5/8"-27 thread. Net Weight: 275 grams (9.6 oz)
Musicians want freedom when playing their instrument - freedom to express themselves, and freedom to move. But when it comes to miking instruments, it usually means being tethered down by audio cables.
With the U-Series Wireless Instrument System, you don’t have to sacrifice your freedom anymore.
The wireless transmitter easily attaches to your instrument and can run up to 12 hours on a single AAA battery. The sturdy base receiver can run on AC power or batteries for unlimited placement options. The diversity receiver design protects against signal drop-outs for total reliability. Since there are 16 user-selectable operating frequencies, up to four systems can be used simultaneously.
Features:
Diversity receiver design eliminates dropouts caused by multipathing and interference
16 operating channels allow for multiple sets to be used simultaneously
Operating range of up to 150 feet
Adjustable squelch control to minimize outside interference
TS ¼” audio output
3 LEDs display power, battery, and antenna link status
Receiver can operate on 2 AA batteries or included DC power adapter
Receiver can be paired with one of five transmitters: UG-3, UG-9, UF-3, US-3, UV-3
Rear Panel Connections: Power adapter input ¼” output
Musicians want freedom when playing their instrument - freedom to express themselves, and freedom to move. But when it comes to miking instruments, it usually means being tethered down by audio cables.
With the U-Series Wireless Instrument System, you don’t have to sacrifice your freedom anymore.
The wireless transmitter easily attaches to your instrument and can run up to 12 hours on a single AAA battery. The sturdy base receiver can run on AC power or batteries for unlimited placement options. The diversity receiver design protects against signal drop-outs for total reliability. Since there are 16 user-selectable operating frequencies, up to four systems can be used simultaneously.
Features:
Diversity receiver design eliminates dropouts caused by multipathing and interference
16 operating channels allow for multiple sets to be used simultaneously
Operating range of up to 150 feet
Adjustable squelch control to minimize outside interference
TS ¼” audio output
3 LEDs display power, battery, and antenna link status
Receiver can operate on 2 AA batteries or included DC power adapter
Receiver can be paired with one of five transmitters: UG-3, UG-9, UF-3, US-3, UV-3
Rear Panel Connections: Power adapter input, ¼” output
The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It has become a leading choice among vocalists and touring professionals worldwide.
The Beta 58A maintains a true supercardioid pattern throughout its frequency range. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille.
Features:
Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound
Neodymium magnet for high signal–to–noise output
Hardened steel mesh grille that resists wear and abuse
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
Minimally effected by varying load impedance
Legendary Shure quality and reliability
Type: Dynamic (moving coil) Frequency Response: 50 to 16,000 Hz Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency. Output Level (at 1,000 Hz): Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV) , *1 Pa = 94 dB SPL Impedance: Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z Phasing. , Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3. Case: Silver blue enamel-painted die cast metal with hardened, matte-finished, spherical steel mesh grille. Adjustable, Stand Adapter: Slip-in microphone mounting, unbreakable, adjustable through 180 degrees with standard 5/8"-27 thread, black finish. Dimensions: See User Guide. Net Weight: 278 grams (9.92 oz)
The Shure Beta 56A microphone has a frequency response specifically tailored for drums and instruments. Its extremely uniform supercardioid pickup pattern provides high gain-before-feedback and excellent rejection of unwanted noise.
A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation. The stand adapter keeps the microphone securely in place, even if it is struck by a drumstick. Typical Beta 56A applications include close miking of tom-toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds.
Features:
Tailored frequency response provides drums, amplified instruments, and horns with studio quality sound
Built–in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility
Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off–axis sound
Compact design reduces stage clutter
Tailored frequency response provides drums, amplified instruments, and horns with studio quality sound
Built–in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility
Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off–axis sound
Compact design reduces stage clutter
Type: Dynamic (moving coil) Frequency Response: 50 to 16,000 Hz Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency Output Level (at 1,000 Hz): Open Circuit Voltage -51 dBV/Pa (2.8 mV) , (1 Pa = 94 dB SPL) Impedance: Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 Connector: Three-pin professional audio connector (male XLR type) Case: Silver blue enamel-painted die cast metal with hardened, matte-finished steel mesh grille Adjustable, Locking Stand Adapter: Integral, dynamic locking, adjustable through 180 degrees with standard 5/8"-27 thread Net Weight: 468 grams (16.7 oz)
The RE920Tx is a cardioid condenser microphone designed for wireless use with musical instruments via its specially designed instrument-mount clip assembly. Although terminated in a TA4F connector for use with EV and Telex bodypack transmitters, it can be made hard-wired with the additional TXA XLR preamp.
Features:
Designed for House of Worship, Performance & Sports Venues, Stadium Systems, Studio, and other applications.
Unidirectional horn/drum mic
Back electret condenser element
Wired with TA4F connector
Smooth audio response and high SPL handling
Custom clip for securely mounting on a variety of instruments
The Nady Encore GT Guitar Wireless System includes the Nady Encore Duet Receiver, and 2 WGT Bodypack Transmitters. This versatile VHF wireless system allows simultaneous operation of two instruments on separate channels.
Nady Encore Duet Receiver The Nady Encore Duet Receiver has a half-rack dual receiver design (Channel A and Channel B) with retractable front panel dual antennas. Dual RF and AF 5-LED displays monitor incoming signal strength and audio level on both channels. Outputs include dual balanced XLR and unbalanced adjustable 1/4" jacks. A dual mute immediately kills sound when needed. Unique snap-out panel locking tabs allow for single receiver or double receiver (side‑by-side) rack mounting if desired. The Encore Duet Receiver is externally powered by an AC/DC power adapter (included).
WGT Microphone Bodypack Transmitter The Nady WGT Bodypack transmitter lets you plug into the guitar or bass of your choice. An OFF/STANDBY/ON switch allows convenient audio muting with the transmitter "ON". The Low battery LED indicator flashes once for unit "ON" and lights steady for a low battery alert. A locking 3.5mm mini-jack provides secure connection for removable microphone cables. The input level adjust control is easily accessible for optimum sound control.
The supplied IC-V1 Instrument cable has a factory installed capacitor inside the 1/4" plug. This capacitor provides first order filtering of the RF signal from the cord into the guitar and eliminates virtually all scratchy noises. The WGT is provided with a 3.5 mm LOCKING JACK for connecting the instrument cable.
Unique HDAP (High Definition Audio Performance) technology ensures the best possible, most realistic sound at any time.
The SR 40 Mini2 receiver provides three status LEDs each for channels 1 and 2, indicating ON/OFF status, received signal strength (RF OK), and audio clipping (AF CLIP). The VOLUME control sets the level at the ¼" output jack. Each receiver comes with a universal 12-V switched mode power supply with EU, UK, and US adapters. The illuminated ON/OFF button switches both channels on and off simultaneously.
The PT 40 Mini bodypack is probably the smallest and lightest transmitter in its class. A reliable mini XLR input allows you to connect every compatible AKG miniature microphone. Battery life is the same legendary 30 hours off a single AA battery as for the standard WMS 40 models, reducing the need to replace batteries and thus saving real money in the long run.
The system includes an SR 40 MINI2 receiver, 2 PT 40 MINI bodypack transmitters, 2 MKG L instrument cables, a universal power supply with US/UK/EU adapters, and 2 AA size dry batteries.
The Shure Beta 98A is a precision-engineered compact, high-output miniature condenser microphone for professional sound reinforcement and studio recording. An extremely uniform cardioid polar pattern provides excellent gain-before-feedback and off-axis rejection of unwanted noise.
Both Beta 98A configurations feature high sound pressure level capability (SPL). Beta 98A/C is recommended for a variety of acoustic or amplified instruments including drums, piano, reed, wind, and strings.
Features:
Uniform cardioid polar pattern provides maximum gain-before-feedback and rejection of off-axis sound for smooth high-end response and control
Frequency response tailored for drums and percussion applications with a wide dynamic range for use in high SPL environments
Precision-engineered design for unobtrusive microphone footprint
Beta 98A models ship with external in-line preamplifier for discrete cable placement, snap-fit windscreen, and zipper pouch
Beta 98A/C ships with RK282 shock mount swivel adapter for attachment to any standard microphone stand
Type: Electret Condenser Frequency Response: 20 to 20,000 Hz Polar Pattern: Cardioid Output Impedance: 179 Ohms Sensitivity (at 1 kHz, open circuit voltage): –48.0 dBV/Pa (4.0 mV) Maximum SPL (1 kHz at 1% THD): 1000 Ohm load: 144 dB Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): 64 dB , S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise, A-weighted Dynamic Range (at 1 kHz): 1000 Ohm load: 114 dB Common Mode Rejection (20 Hz to 20 kHz): > 50 dB Clipping Level (1 kHz at 0.25% THD): 1000 Ohm load: 1.0 dBV (1.26 V) , THD of microphone preamplifier when applied input signal is equivalent to cartridge output at specified SPL Self-Noise (typical, equivalent SPL, A-weighted): 30 dB SPL Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 Weight: Net: 12 g (0.6 oz.) Connector: Three-pin professional audio (XLR), male, balanced Power Requirements: 11-52 Vdc phantom, 3.6 mA
A 100-channel receiver and bodypack transmitter for electric instruments.
The Nady UWS-100 GT Headset Wireless System includes a UWS-100 receiver and a WGT bodypack transmitter.
The Nady UWS-100 receiver is a 100-channel, select UHF Wireless System with 100 frequencies per 24MHz wide band, that are manually selectable or by autoscan feature for open channels. The UWS-100 offers unsurpassed state-of-the-art PLL UHF performance with 120dB dynamic range and operation up to 500' line-of-sight.
Other UWS-100 features include: ASC (Auto-Sync Channels) download which sends selected Group/Channel information to the transmitter using the IR sender for easy frequency synchronization; Tone Squelch circuitry for protection from RF interference; Front Panel Touch control buttons for ease-of-channel selection; ASC operation; and DigiTRU Diversity for maximum range and dropout protection.
The Nady WGT bodypack transmitter works perfectly with the UWS-100 and is designed for use with electric guitars and basses.
Features:
Unsurpassed state-of-the-art PLL UHF performance with 120dB dynamic range and operation, up to 500 ft. (line-of-sight)
100 user-switchable UHF frequencies per band, or automatic open channel selection with convenient auto-scan feature
ASC (Auto-Sync Channels) download feature sends selected Group/Channel information to transmitter via IR sender for easy frequency synchronization
Front panel touch control buttons for ease of channel selection and ASC operation
Tone Squelch circuitry for protection from RF interference
DigiTRU Diversity for maximum range and dropout protection
AF level displays and folding dual antennas
Front panel On/Off button (with Power On LED indicator); full LED indicators including A/B diversity, Group/Channel selected, ASC transfer status, and bi color (green/red)
Back panel balanced XLR fixed Mic Level and adjustable unbalanced ¼" jack audio Line Level outputs; squelch (RF mute) adjust; DC input jack; volume control for ease of operation
Externally powered with included DC adapter (15 VDC 400 mA)
Rugged all-metal receiver designed for long-term durability.
WGT Bodypack Transmitters:
Off/Standby/On switch allows convenient audio muting with the transmitter on
Input level adjust
Locking 3.5mm jack
LED status indicator flashes once for unit on, lights steady for low-battery alert
Two discrete UHF wireless receivers in one housing for simultaneous operation of two transmitters
Back panel balanced XLR Mic Level outputs; unbalanced ¼” jack Line Level sum output; separate volume and external adjustable mute controls for each channel
Front panel LED display indicates TX signal received and 5-segment AF Level displays for each channel
Front panel dual telescoping retractable antennas
Exclusive patented companding circuitry and highest quality audio for unsurpassed 120dB dynamic range
Tone Squelch circuitry eliminates On/Off “pop” and provides protection from RF interference
Unique snap-out panel locking tabs for optional single receiver rackmounting or dual receiver (side-by-side) rackmounting
Externally powered with DC adapter (15VDC/0.4A) included
Choice of two transmitters: UH-4 or UB-4
UB-4 Bodypack Transmitter:
Choice of instrument, headworn or lavalier mic operating modes in a single bodypack transmitter
Off/Standby/On switch allows convenient audio muting while transmitter on
Status LED indicator flashes once for Unit On; lights steady for low-battery alert
Locking 3.5mm mini-jack provides secure connection for removable microphone or instrument cable
16 user-selectable PLL frequencies for interference-free operation
Up to 250 ft. operating range, line-of-sight
Infrared ASC Auto-Sync Channels transfer from receiver to transmitter for instant setup
Battery operated receiver and transmitter
MGT-16 Receiver:
Compact, portable, "pedal style" receiver
Dual 1/4 wave antennas
Infrared sync with transmitter for instant setup
Unbalanced 1/4" line out jack
Power On/Off/Mute switch; Volume Control; LED indicators for Power On, Low Battery Alert, and RF Reception; DIP-switch channel selection with IR sync to transmitter
Powered by DC adapter (included) or two AA alkaline batteries for portability (up to 8 hours battery life)
MT-16R Transmitters:
Choice of two transmitter housings: MT-16A with 30 degree angled 1/4" plug for use with either recessed or surface mounted jacks, or MT-16R with 90 degree angled 1/4" plug for surface mounted jacks only
Up to eight hours of battery life from a single AAA alkaline or NiMH rechargeable battery
Infrared channel sync with receiver for instant setup
Power On/Off switch; Power/Low Battery LED indicators; IR Sync LED; Input Level attenuation switch; internal Audio Level control trim-pot
16 user-selectable PLL frequencies for interference-free operation
Up to 250 ft. operating range, line-of-sight
Infrared ASC Auto-Sync Channels transfer from receiver to transmitter for instant setup
Battery operated receiver and transmitter
MT-16A Transmitters:
Choice of two transmitter housings: MT-16A with 30 degree angled 1/4" plug for use with either recessed or surface mounted jacks, or MT-16R with 90 degree angled 1/4" plug for surface mounted jacks only
Up to eight hours of battery life from a single AAA alkaline or NiMH rechargeable battery
Infrared channel sync with receiver for instant setup
Power On/Off switch; Power/Low Battery LED indicators; IR Sync LED; Input Level attenuation switch; internal Audio Level control trim-pot
Condenser: Lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances. Powered by battery or phantom power supply.
The Beta 98H/C and the wireless version WB98H/C are premium cardioid condenser instrument microphones that clamp onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the mic to be easily positioned and secured, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.
Features:
The Beta 98 H/C and WB98 H/C feature transformerless preamplifier circuitry which improves linearity across the full frequency range.
The pickup pattern provides high gain-before-feedback and excellent rejection of unwanted noise.
Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments.
The Beta98H/C features a 3 m (10 ft.) high-flex cable with attached preamplifier (XLR connection)
The WB98H/C features a 1.6 m (5.3ft) high-flex cable terminating in a 4-pin mini-connector, for use with wireless bodypack transmitters
Tailored frequency response for open, natural sound reproduction
Compact, lightweight construction provides a low degree of visibility
Gooseneck, ratcheting swivel joint and gooseneck angle brace allow for optimum placement and fixed positioning
Legendary Shure ruggedness and reliability
Interchangeable replacement cartridges:
RPM108 : Cardioid
RPM110 : Supercardioid
Type: Condenser (electret bias) Frequency Response: 20 to 20,000 Hz Polar Pattern: Unidirectional (cardioid) Output Impedance: Rated at 150.0 ohms (actual) Recommended minimum load impedance: 1 kilohm. May be used with loads as low as 150 ohms with reduced clipping level. Output Level (0 dB = 1 volt per Pascal): Open Circuit Voltage: -56 dB (1.6 mV) Output Clipping Level (at 1kHz, THD < 1%): 2.5 kilohm load: 11 dBV (3.5 V), 1.0 kilohm load: 3 dBV (1.4 V) Maximum SPL: 2.5 kilohm load: 163 dB, 1.0 kilohm load: 155 dB Dynamic Range (maximum SPL to A-weighted noise level): 132 dB (2.5 kilohm load) Signal-to-noise ratio: 63 dB at 94 dB SPL (IEC 651) Polarity: Positive pressure on microphone diaphragm produces positive voltage on pin 2 relative to pin 3 of preamplifier output connector. Recommended Operating Voltage: 11 to 52 Vdc Phantom Environmental Conditions: Operating temperatures: -7 degrees C to 49 degrees C (20 degrees F to 120 degrees F), Storage temperatures: 29 degrees C to +74 degrees C (-20 degrees F to 165 degrees F), Relative Humidity: 0 to 95% Net Weight: Microphone w/cable and preamplifier: 156 g (5.5 oz.)
Musicians want freedom when playing their instrument - freedom to express themselves, and freedom to move. But when it comes to miking instruments, it usually means being tethered down by audio cables.
With the U-Series Wireless Instrument System, you don’t have to sacrifice your freedom anymore.
The wireless transmitter easily attaches to your instrument and can run up to 12 hours on a single AAA battery. The sturdy base receiver can run on AC power or batteries for unlimited placement options. The diversity receiver design protects against signal drop-outs for total reliability. Since there are 16 user-selectable operating frequencies, up to four systems can be used simultaneously. Features:
Diversity receiver design eliminates dropouts caused by multipathing and interference
16 operating channels allow for multiple sets to be used simultaneously
Operating range of up to 150 feet
Adjustable squelch control to minimize outside interference
TS ¼” audio output
3 LEDs display power, battery, and antenna link status
Receiver can operate on 2 AA batteries or included DC power adapter
Receiver can be paired with one of five transmitters: UG-3, UG-9, UF-3, US-3, UV-3
Rear Panel Connections: Power adapter input, ¼” output
Musicians want freedom when playing their instrument - freedom to express themselves, and freedom to move. But when it comes to miking instruments, it usually means being tethered down by audio cables.
With the U-Series Wireless Instrument System, you don’t have to sacrifice your freedom anymore.
The wireless transmitter easily attaches to your instrument and can run up to 12 hours on a single AAA battery. The sturdy base receiver can run on AC power or batteries for unlimited placement options. The diversity receiver design protects against signal drop-outs for total reliability. Since there are 16 user-selectable operating frequencies, up to four systems can be used simultaneously.
Features:
Diversity receiver design eliminates dropouts caused by multipathing and interference
16 operating channels allow for multiple sets to be used simultaneously
Operating range of up to 150 feet
Adjustable squelch control to minimize outside interference
TS ¼” audio output
3 LEDs display power, battery, and antenna link status
Receiver can operate on 2 AA batteries or included DC power adapter
Receiver can be paired with one of five transmitters: UG-3, UG-9, UF-3, US-3, UV-3
Rear Panel Connections: Power adapter input, ¼” output
Musicians want freedom when playing their instrument - freedom to express themselves, and freedom to move. But when it comes to miking instruments, it usually means being tethered down by audio cables.
With the U-Series Wireless Instrument System, you don’t have to sacrifice your freedom anymore.
The wireless transmitter easily attaches to your instrument and can run up to 12 hours on a single AAA battery. The sturdy base receiver can run on AC power or batteries for unlimited placement options. The diversity receiver design protects against signal drop-outs for total reliability. Since there are 16 user-selectable operating frequencies, up to four systems can be used simultaneously.
Features:
Diversity receiver design eliminates dropouts caused by multipathing and interference
16 operating channels allow for multiple sets to be used simultaneously
Operating range of up to 150 feet
Adjustable squelch control to minimize outside interference
TS ¼” audio output
3 LEDs display power, battery, and antenna link status
Receiver can operate on 2 AA batteries or included DC power adapter
Receiver can be paired with one of five transmitters: UG-3, UG-9, UF-3, US-3, UV-3
Rear Panel Connections: Power adapter input, ¼” output
The Shure Beta 98A is a precision-engineered compact, high-output miniature condenser microphone for professional sound reinforcement and studio recording. An extremely uniform cardioid polar pattern provides excellent gain-before-feedback and off-axis rejection of unwanted noise.
Both Beta 98A configurations feature high sound pressure level capability (SPL). Beta 98AD/C includes A98D drum mount with flexible gooseneck that makes it an essential, accurate choice for toms, snares, and percussion.
Features:
Uniform cardioid polar pattern provides maximum gain-before-feedback and rejection of off-axis sound for smooth high-end response and control
Frequency response tailored for drums and percussion applications with a wide dynamic range for use in high SPL environments
Precision-engineered design for unobtrusive microphone footprint
Beta 98A models ship with external in-line preamplifier for discrete cable placement, snap-fit windscreen, and zipper pouch
Beta 98AD/C ships with A98D drum mount featuring a flexible gooseneck for precise placement and secure attachment
Type: Electret Condenser Frequency Response: 20 to 20,000 Hz Polar Pattern: Cardioid Output Impedance: 179 Ohms Sensitivity (at 1 kHz, open circuit voltage): –48.0 dBV/Pa (4.0 mV) Maximum SPL (1 kHz at 1% THD): 1000 Ohm load: 144 dB Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): 64 dB , S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise, A-weighted Dynamic Range (at 1 kHz): 1000 Ohm load: 114 dB Common Mode Rejection (20 Hz to 20 kHz): > 50 dB Clipping Level (1 kHz at 0.25% THD): 1000 Ohm load: 1.0 dBV (1.26 V) , THD of microphone preamplifier when applied input signal is equivalent to cartridge output at specified SPL Self-Noise (typical, equivalent SPL, A-weighted): 30 dB SPL Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 Weight: Net: 12 g (0.6 oz.) Connector: Three-pin professional audio (XLR), male, balanced Power Requirements: 11-52 Vdc phantom, 3.6 mA
ATW-701 Unipak Transmitter Select A Wireless Essentials Microphone Or Cable To Complete The System
Audio-technica’s 701 Series Freeway Wireless Delivers Professional Features And Sound Quality Unheard Of In Its Class. These Easy-to-use Wireless Systems Feature Eight Selectable Frequency-coordinated Channels, Diversity Operation For Increased Range/Reliability, Automatic Frequency Scanning, Tone Lock Squelch And More. 701 Series Freeway Systems Come Equipped With Your Choice Of Handheld, Headworn, Or Lavalier Microphones; Or Choose A System Designed For Guitar Hookup. For Multiple-mic Applications, As Many As Eight Systems May Be Used Together.
Features:
8 Selectable Frequency-coordinated Uhf Channels
Use Up To 8 Simultaneous Systems—all Channels Compatible
Automatic Frequency Scanning
Diversity Operation For Increased Range/Reliability
Led Channel Display Plus Antenna, Af Peak Indicators
Balanced Xlr And Unbalanced ¼” Output Connectors
Tone Lock Squelch System Eliminates Interference When Transmitter Is Off
Unipak Transmitter Features: Separate Guitar/Mic Trim Control, Switchable High/Low Rf Power, Internal Channel Selector, Multi-color Battery/Power Indicator, Aa Operation
Handheld Transmitter Features: Variable Trim Control, Internal Channel Selector, Multi-color Battery/Power Indicator, Aa Operation
Freeway Body-pack Systems Are Compatible With All Audio-technica Wireless Essentials Microphones And Cables
Operating Frequencies: Uhf Band, 542.125 Mhz To 561.250 Mhz Number Of Channels: 8 Frequency Stability: ±0.005%, Phase Lock Loop Frequency Control Modulation Mode: Fm Maximum Deviation: ±25 Khz Operating Range: 200' Typical Operating Temperature Range: 40° F (4° C) To 110° F (43° C) Frequency Response: 100 Hz To 12 Khz
Receiver Specifications: Receiving System: Antenna-switching Diversity Image Rejection: 55 Db Minimum Signal-to-noise Ratio: >80 Db At 10 Khz Deviation (Iec-weighted), Maximum Deviation 25 Khz Total Harmonic Distortion: <=1% (10 Khz Deviation At 1 Khz) Sensitivity: 25 Dbµv (S/N 60 Db At 10 Khz Deviation, Iec-weighted) Audio Output: Unbalanced: 211 Mv (-13.5 Dbv) (1 Khz Modulation, 10 Khz Deviation) Balanced: 150 Mv (-16.5 Dbv) (1 Khz Modulation, 10 Khz Deviation) Output Connectors: Unbalanced: 1/4" Ts ("Mono") Phone Jack Balanced: Xlrm-type Power Supply: 100-240v Ac (50/60 Hz) To 12 Dc 1 A (Center Positive) Switched Mode, External Power Supply Dimensions: 7.48" (190.0 Mm) W X 1.65" (42.0 Mm) H X 5.12" (130.0 Mm) D Weight: 12.9 Oz (365 G) Accessory Included: Power Supply
Body-pack Transmitter Specifications Rf Power Output High: 10 Mw; Low: 5 Mw Spurious Emissions Under Federal Regulations Dynamic Range >100 Db, A-weighted Input Connections High Impedance, Low Impedance, Bias Batteries Two 1.5v Aa Alkaline (Not Included) Current Consumption High: 140 Ma; Low: 130 Ma, Typical Battery Life Approximately 8 Hours (High); 10 Hours (Low), Depending On Battery Type And Use Pattern Dimensions 2.56" (65.0 Mm) W X 4.13" (105.0 Mm) H X 0.73" (18.5 Mm) D Net Weight 2.8 Oz (80 G) Handheld Transmitter Specifications: Rf Power Output: 10 Mw Spurious Emissions: Under Federal Regulations Dynamic Range: >100 Db, A-weighted Microphone Element: Dynamic, Unidirectional Batteries: Two 1.5v Aa Alkaline (Not Included) Current Consumption: 120 Ma, Typical Battery Life: Approximately 12 Hours, Depending On Battery Type And Use Pattern Dimensions: 9.65" (245.0 Mm) Long, 2.11" (53.5 Mm) Diameter Net Weight: 9.1 Oz (257 G) (Without Batteries) Accessory Included: At8456a Quiet-flex Stand Clamp
Audio-Technica’s 700 Series Freeway wireless delivers professional features and sound quality unheard of in its class. These easy-to-use wireless systems feature eight selectable frequency-coordinated channels, diversity operation for increased range/reliability, automatic frequency scanning, Tone Lock squelch and more. 700 Series Freeway systems come equipped with your choice of handheld, headworn, or lavalier microphones; or choose a system designed for guitar hookup. For multiple-mic applications, as many as eight systems may be used together.
Features:
8 selectable frequency-coordinated UHF channels
Use up to 8 simultaneous systems—all channels compatible
Automatic frequency scanning
Diversity operation for increased range/reliability
LED Channel display plus Antenna, AF Peak indicators
Balanced XLR and unbalanced ¼” output connectors
Tone Lock squelch system eliminates interference when transmitter is off
UniPak transmitter features: separate guitar/mic trim control, switchable high/low RF power, internal channel selector, multi-color battery/power indicator, AA operation
Handheld transmitter features: variable trim control, internal channel selector, multi-color battery/power indicator, AA operation
Freeway body-pack systems are compatible with all Audio-Technica Wireless Essentials microphones and cables
OVERALL SYSTEM: Operating Frequencies: UHF band, 542.125 MHz to 561.250 MHz Number of Channels: 8 Frequency Stability: ±0.005%, Phase Lock Loop frequency control Modulation Mode: FM Maximum Deviation: ±25 kHz Operating Range: 200' typical Operating Temperature Range: 40° F (4° C) to 110° F (43° C) Frequency Response: 100 Hz to 12 kHz
RECEIVER SPECIFICATIONS: Receiving System: Antenna-switching diversity Image Rejection: 55 dB minimum Signal-to-noise Ratio: >80 dB at 10 kHz deviation (IEC-weighted), maximum deviation 25 kHz Total Harmonic Distortion: <=1% (10 kHz deviation at 1 kHz) Sensitivity: 25 dBµV (S/N 60 dB at 10 kHz deviation, IEC-weighted) Audio Output: Unbalanced: 211 mV (-13.5 dBV) (1 kHz modulation, 10 kHz deviation) Balanced: 150 mV (-16.5 dBV) (1 kHz modulation, 10 kHz deviation) Output Connectors: Unbalanced: 1/4" TS ("mono") phone jack Balanced: XLRM-type Power Supply: 100-240V AC (50/60 Hz) to 12 DC 1 A (center positive) switched mode, external power supply Dimensions: 7.48" (190.0 mm) W x 1.65" (42.0 mm) H x 5.12" (130.0 mm) D Weight: 12.9 oz (365 g) Accessory Included: Power supply
BODY-PACK TRANSMITTER SPECIFICATIONS: RF Power Output: High: 10 mW; Low: 5 mW Spurious Emissions: Under federal regulations Dynamic Range: >100 dB, A-weighted Input Connections: High impedance, low impedance, bias Batteries: Two 1.5V AA alkaline (not included) Current Consumption: High: 140 mA; Low: 130 mA, typical Battery Life: Approximately 8 hours (High); 10 hours (Low), depending on battery type and use pattern Dimensions: 2.56" (65.0 mm) W x 4.13" (105.0 mm) H x 0.73" (18.5 mm) D Net Weight: 2.8 oz (80 g)
HANDHELD TRANSMITTER SPECIFICATIONS: RF Power Output: 10 mW Spurious Emissions: Under federal regulations Dynamic Range: >100 dB, A-weighted Microphone Element: Dynamic, unidirectional Batteries: Two 1.5V AA alkaline (not included) Current Consumption: 120 mA, typical Battery Life: Approximately 12 hours, depending on battery type and use pattern Dimensions: 9.65" (245.0 mm) long, 2.11" (53.5 mm) diameter Net Weight: 9.1 oz (257 g) (without batteries) Accessory Included: AT8456a Quiet-Flex stand clamp
Audio-Technica's second-generation 2000 Series is a 10-channel frequency-agile UHF wireless system designed to suit a variety of applications, including MI/live performance, fixed installation, public address, A/V rental houses and places of worship. It offers all the advantages of a high-quality, professional wireless system at an extremely affordable price. New professional features switchable antenna power. Includes ATW-R2100a receiver and ATW-T210a UniPak transmitter. Select a Wireless Essentials microphone or cable to complete the system. Offering 10 selectable channels in one of two UHF frequency ranges and True Diversity UHF wireless technology, the 2000 Series features automatic frequency scanning. At the touch of a button, this function automatically determines and sets the best available frequency. Any of the 2000 Series’ 10 channels may be used together without any frequency coordination problems or group selection issues. The 2000 Series also incorporates Audio-Technica's digital Tone Lock squelch plus an easy-to-read LCD information display.
Features:
Serious advances in affordable professional wireless
10 compatible user-switchable channels in UHF frequency ranges
Antenna power available for powered antennas & other in-line RF devices
True Diversity operation selects the better signal from the two receiver sections, reducing dropout
Tone Lock tone squelch system fights interference
Rugged metal half-rack receiver with soft-touch controls and LCD display
Balanced XLR and unbalanced 1/4" output jacks enable use with a wide variety of audio gear
Audio-Technica's second-generation 2000 Series is a 10-channel frequency-agile UHF wireless system designed to suit a variety of applications, including MI/live performance, fixed installation, public address, A/V rental houses and places of worship. It offers all the advantages of a high-quality, professional wireless system at an extremely affordable price. New professional features switchable antenna power. Includes ATW-R2100a receiver and ATW-T210a UniPak transmitter. Select a Wireless Essentials microphone or cable to complete the system. Offering 10 selectable channels in one of two UHF frequency ranges and True Diversity UHF wireless technology, the 2000 Series features automatic frequency scanning. At the touch of a button, this function automatically determines and sets the best available frequency. Any of the 2000 Series’ 10 channels may be used together without any frequency coordination problems or group selection issues. The 2000 Series also incorporates Audio-Technica's digital Tone Lock squelch plus an easy-to-read LCD information display.
Features:
Clear sound quality and rock-solid, dependable performance
Automatic frequency scanning finds an open channel at the touch of a button
All 10 user-switchable channels are compatible, for easy use with multiple systems
9 hours average battery life, 2 x AA alkaline (not included)
True Diversity operation selects the better signal from the two receiver sections, reducing dropout
Tone Lock tone squelch system fights interference
Rugged metal half-rack receiver, soft-touch controls, RF and AF metering
Overall System Specifications: Operating frequency: 656.125 to 678.500 MHz Number of channels: 10 total Modulation mode: FM Maximum deviation: ±40 kHz Dynamic range: > 110 dB (A-weighted), typical T.H.D.: < 1% (at 1 kHz, ±20 kHz deviation) Operating range: 100 m (300') typical; open range environment with no interfering signals Operating temperature range: 41º F to 113º F (5º C to 45º C) Frequency response: 100 Hz to 15 kHz (+1 dB, -3 dB)
Receiver Specifications: Receiving system: True diversity Image rejection: 60 dB nominal, 55 dB minimum RF sensitivity: 20 dBuV at 60 dB, S/N ratio (50 ohms termination) Antenna input: BNC-type, 50 ohms Bias voltage 12V DC, 60 mA, each Power requirements: 12-18V DC, 500 mA Dimensions: 8.27" W x 6.39" D x 1.73" H (210.0 x 162.2 x 44.0 mm), not including BNC connectors or feet Maximum output level: XLR, balanced