Installation Mics

Sort By: Name | Price

Installation Mics

SGM-12

$29.99

Compare

SGM-12

List Price: ~~$39.99~~

Your Price: $29.99

Vendor Name

SGM-12

Quantity:

Nady

SGM-12

Electret condenser shotgun microphone

Features:

Ideal for a variety of sound reinforcement/recording applications: Choirs, orchestras, theatrical performances, courtrooms/conference rooms, and inside bass/kick drums
Unidirectional pickup pattern and full frequency response of 50Hz~18KHz produce top audio at any distance from the source with excellent feedback rejection
Rugged die-cast alloy housing on rubber padding minimizes mechanical coupling of surface vibrations to the microphone
Single AA alkaline or NiMH battery operation (not included)

CBM 40X

$59.99

Compare

WP-300

$69.00

Compare

WP-300

List Price: ~~$69.00~~

Your Price: $69.00

Vendor Name

WP-300

Quantity:

Electro Voice

Dynamic Plate Mic Low Z - Electro-Voice

Electro-Voice WP-300 Dynamic Plate Mic, Low Z Wired Microphones Paging and Communications Microphones 70666001 Telex EV Electrovoice EV Electro-Voice Telex WP-300 is a dynamic wall plate microphone that installs into a standard electrical, single gang wall box. The WP-300 features a dynamic element that's specifically designed to reproduce speech with enhanced detail and intelligibility. The WP-300 is ideal for security applications, drive through installation and more.

Features:

Dynamic Element The WP-300 features a dynamic element that handles high peak response without distortion.
Omnidirectional Pattern The omnidirectional polar pattern provides an even pick at the direct and off-axis sections of the microphone.
Wall Box Installation The WP-300 installs into a standard electrical, single gang wall box.

DMK-3

$79.99

Compare

WP-300S

$88.00

Compare

MXL FR-401

$97.92

Compare

MXL FR-401

List Price: ~~$119.95~~

Your Price: $97.92

Vendor Name

MXL FR-401

Quantity:

MXL Marshall

The MXL FR-401 boundary mic is designed to pickup multiple sources from a distance while avoiding unwanted sounds from behind the mic. Some common applications include recording interviews, live concerts, studio recording sessions, or plugging directly into a video camera to make sure you get all the audio on set.

Features:

Three capsule array
Built-in 15 ft XLR cable
Great for stage, live performances, interviews, podcasting and more!

Type: Boundary mic with 3-capsule array
Polar Pattern: Cardioid
Frequency Response: 40Hz - 16kHz
Pick-up Range: 20-25 Ft
Max SPL: 120 dB
Sensitivity: 45mV/Pa
Output Impedance: 200 ohms
Signal-to-Noise Ratio: 72 dB
Operating Voltage: 48V phantom power

MXL FR-402

$97.92

Compare

MXL FR-402

List Price: ~~$129.95~~

Your Price: $97.92

Vendor Name

MXL FR-402

Quantity:

MXL Marshall

The MXL FR-402 is a multipurpose boundary mic with a wide pattern and low profile. You can use this mic on a number of different sources in almost any location. It's also right at home on a conference table, recording interviews, connected to a video camera for field recording or capturing audio from a concert or play.

Features:

Three capsule array
Includes 15' mini XLR-to-XLR cable
Wide pattern for stage, live performance, interviews, podcasting, and concerts

Type: Boundary microphone
Polar Pattern: 120 degree cardioid
Frequency Response: 80Hz - 14kHz
Pick-up Range: 15 ft
Max SPL: 120 dB
Sensitivity: 40mV/Pa
Output Impedance: 200 ohms
Signal-to-Noise Ratio: 72 dB
Operating Voltage: 48V phantom power

OHCM-200

$99.99

Compare

OHCM-200

List Price: ~~$99.99~~

Your Price: $99.99

Vendor Name

OHCM-200

Quantity:

Nady

OHCM-200

Overhead cardioid pattern choir microphone with hang wire mount and 20 ft. permanently attached cable w/integrated power module/XLR connector. Available in black or white

Features:

Extended smooth, flat frequency response; ultra sensitivity and high SPL capacity for clearest audio performance in any application — from miking choral groups to stage performances
Low-mass back electret condenser element for most accurate, detailed audio
Cardioid pattern for frontal audio pickup without feedback and unwanted side and rear fill
Permanently attached 20’ (6.1M) cable with convenient integrated power module/XLR (M) connector
Rugged construction for optimum reliability. Integrated hanging wire for ease of mounting
Conveniently powered by external 9~52 phantom power, no batteries required

DMK-5

$119.99

Compare

US600EL

$129.00

Compare

US600EL

List Price: ~~$187.00~~

Your Price: $129.00

Vendor Name

US600EL

Quantity:

Electro Voice

Dynamic Noise Canceling Grip to Talk Microphone Black - Electro-Voice

The Electro-Voice Models US600EL and US602FL are low impedance handheld dynamic microphones with a pushto- talk switch. The model US600EL is an omnidirectional microphone with a tailored frequency response for high articulation speech transmission under normal ambient noise conditions. The model US602FL is a bidirectional, noise-cancelling microphone designed for high articulation speech transmission in high ambient noise conditions. The microphone can be used in noisy situations where successful voice communications would otherwise be impossible. Both microphones have a high output level and great performance stability through wide extremes of temperature and humidity, making the US600EL and US602FL an excellent choice for communications. Typical applications include amateur radio, police, marine services, commercial and paging. The US602FL noise-cancelling characteristic makes it especially effective for use in public address applications where severe feedback due to microphone position in relation to loudspeakers is a problem. The US600EL and US602FL are designed for comfortable, convenient use. The functional styling, the extremely durable Polycarbonate housing and the lifetime switch assembly all result in a microphone with superior performance, capable of long-term survival in the most demanding applications.

DMK-2

$129.99

Compare

PRO42

$140.00

Compare

PRO42

List Price: ~~$140.00~~

Your Price: $140.00

Vendor Name

PRO42

Quantity:

Audio Technica

PRO42

The PRO42's low-profile design assures inconspicuous appearance for surface-mount use in boardroom, school, government, house of worship and other installed applications. Designed for sound reinforcement, broadcasting and recording applications, the PRO42 brings crisp, intelligible audio reproduction to the podium, stage, conference table and beyond. With a wide-range condenser element and low-mass diaphragm for superior performance, the microphone is equipped with self-contained electronics, eliminating the need for external power modules.

Features:

Very low-profile design for minimum visibility
Wide-range condenser element with low-mass diaphragm for superior performance
Uniform polar pattern for maximum rejection of unwanted sounds
Rugged design and construction
25' (7.6 m) cable permanently attached between microphone and XLRM-type connector

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
Frequency Response: 70-14,000 Hz
Open Circuit Sensitivity: -38 dB (12.5 mV) re 1V at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 105 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 65 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 9-52V DC, 2 mA typical
Weight: 1.2 oz (35 g)
Dimensions: 1.44" (36.6 mm) maximum width, 2.14" (54.3 mm) maximum length, 0.61" (15.5 mm) height
Output Connector: 3-pin XLRM-type on cable
Cable: 25' (7.6 m) long, permanently attached

PRO45

$145.00

Compare

PRO45

List Price: ~~$145.00~~

Your Price: $145.00

Vendor Name

PRO45

Quantity:

Audio Technica

PRO45

With robust construction and unobtrusive appearance, the PRO45 and PRO45W offer versatile sound-reinforcement solutions for speech, theater, orchestra and choir sound reinforcement and recording. The microphones high-SPL handling is perfect for suspension over choirs and orchestras.

Features:

Hi-SPL handling is ideal for suspension over choirs and orchestras
Wide-range condenser element with low-mass diaphragm for superior performance
Self-contained electronics eliminate need for external power modules
Flat, smooth frequency response
25' (7.6 m) cable permanently attached between microphone and XLRM-type connector

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 70-16,000 Hz
Open Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 106 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 66 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 9-52V DC, 2 mA typical
Weight: 0.5 oz (15 g)
Dimensions: 2.24" (56.9 mm) long, 0.47" (12.0 mm) head diameter
Output Connector: 3-pin XLRM-type on cable
Cable: 25' (7.6 m) long, permanently attached
Accessories: AT8146(WH) windscreen; AT8451(WH) steel hanger

PRO45W

$145.00

Compare

PRO45W

List Price: ~~$145.00~~

Your Price: $145.00

Vendor Name

PRO45W

Quantity:

Audio Technica

PRO45W

With robust construction and unobtrusive appearance, the PRO 45 and PRO 45W offer versatile sound-reinforcement solutions for speech, theater, orchestra and choir sound reinforcement and recording. The microphones’ high-SPL handling is perfect for suspension over choirs and orchestras.

Features:

Hi-SPL handling is ideal for suspension over choirs and orchestras
Wide-range condenser element with low-mass diaphragm for superior performance
Self-contained electronics eliminate need for external power modules
Flat, smooth frequency response
25' (7.6 m) cable permanently attached between microphone and XLRM-type connector

ELEMENT: Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN: Cardioid
FREQUENCY RESPONSE: 70-16,000 Hz
OPEN CIRCUIT SENSITIVITY: -37 dB (14.1 mV) re 1V at 1 Pa
IMPEDANCE: 100 ohms
MAXIMUM INPUT SOUND LEVEL: 134 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical): 106 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: 66 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 9-52V DC, 2 mA typical
WEIGHT: 0.5 oz (15 g)
DIMENSIONS: 2.24" (56.9 mm) long,
0.47" (12.0 mm) head diameter
OUTPUT CONNECTOR: 3-pin XLRM-type on cable
CABLE: 25' (7.6 m) long, permanently attached
ACCESSORIES FURNISHED: AT8146(WH) windscreen; AT8451(WH) steel hanger
AUDIO-TECHNICA CASE STYLE: M21

PRO44

$145.00

Compare

PRO44

List Price: ~~$145.00~~

Your Price: $145.00

Vendor Name

PRO44

Quantity:

Audio Technica

PRO44

With its half-space unidirectional polar pattern, low-profile design, and outstanding sound quality, the PRO44 is ideal for conference tables, podiums, lecterns and other installed-sound uses. This versatile boundary mic's self-contained electronics eliminate the need for external power modules. The PRO44 is equipped with a wide-range condenser element with low-mass diaphragm for superior performance.

Features:

Low profile for minimum visibility
Wide-range condenser element with low-mass diaphragm for superior performance
Self-contained electronics eliminate need for external power modules
Rugged design and construction
25' (7.6 m) detachable cable (TA3F to XLRM-type)

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
Frequency Response: 70-16,000 Hz
Open Circuit Sensitivity: -25 dB (56.2 mV) re 1V at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 114 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 86 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 66 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 9-52V, 2 mA typical
Weight: 2.4 oz (67 g)
Dimensions: 2.87" (73.0 mm) maximum width, 3.56" (90.5 mm) maximum length, 0.59" (15.0 mm) height
Output Connector: TB3M-type
Cable: 25' (7.6 m) long, with TA3F and XLRM-type connectors

MXL FR-303

$146.80

Compare

MXL FR-303

List Price: ~~$159.95~~

Your Price: $146.80

Vendor Name

MXL FR-303

Quantity:

MXL Marshall

When the subject is further than a built-in camera mic will effectively record, you'll need a good shotgun mic like the FR-303. Measuring only 6 inches in length, the FR-303 offers clear, high-quality recordings and is perfect for videographers who want a shorter mic mounted on camera.

Features:

Perfect for the digital videographers
Built-in XLR Cable
Length: 6"
Frequency Response: 50Hz-15KHz
Sensitivity: 10mV/Pa
Impedance: 200 ohms
Max SPL: 127 dB
Signal-to-Noise Ratio: 68 dB
Dynamic Range: 101 dB
Operating Voltage: 9-52V

MX202B/N

$147.00

Compare

MX202B/N

List Price: ~~$157.00~~

Your Price: $147.00

Vendor Name

MX202B/N

Quantity:

Shure

MX202B/N

Shure MX202BN - Hanging Microphone (Black)

It's hard to believe that such small, unobtrusive microphones can produce such great sound, but it's true. Available in black or white finishes, and with in line or plate mount preamps, the Microflex Overhead condenser microphones capture Shure quality sound in a compact, adjustable package. Each model features one of the three interchangeable condenser microphone cartridges attached to a flexible, four inch gooseneck with a 30 foot cable.

The preamp options available offer easy installation in ceilings or microphone stands, and when combined with the high sensitivity cartridge's wide frequency response, these microphones provide accurate sound reproduction with a minimum of RF interference or electromagnetic hum. The new Microflex Overheads feature interchangeable cardioid, supercardioid and omnidirectional condenser cartridges that fit every model in the Microflex product line for enhanced convenience and consistent sound.

Features:

Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Balanced, transformerless output for increased immunity to noise over long cable runs
Supplied stand-mount adapter for portable applications (in-line preamplifier versions only)
White or black finish that blends unobtrusively with most surroundings.
Cardioid: "R-185B" (Black), "R-185W" (White)
Supercardioid: "R-184B" (Black), "R-184W" (White)
Omnidirectional: "R-183B" (Black), "R-183W" (White)

Transducer: Condenser
Polar Pattern: None, Must Purchase One (or More) of the Following Capsules:
Cardioid: "R-185B" (Black), "R-185W" (White)
Supercardioid: "R-184B" (Black), "R-184W" (White)
Omnidirectional: "R-183B" (Black), "R-183W" (White)
Frequency Response: 50 Hz - 17 kHz
Dynamic Range (Typical): 96.2 dB, (@ 1 kW Load)
Signal-to-Noise Ratio: Cardioid: 66 dB
Supercardioid: 67.5 dB
Omindirectional: 73.5 dB, (All Referenced @ 94 dB SPL)
Maximum Input Sound Level: Cardioid: 124.2 dB
Supercardioid: 122.7 dB
Omnidirectional: 116.7 dB
Power Requirements: Phantom, (11 - 52v DC)
Output Impedance: 150 Ohms, (180 Ohms Actual)
Output Connectors: XLR-3M Type, (from In-Line Pre Amp Out)
Pad: None
Low Frequency Roll-Off: None
Applications: Choirs and Perfomance Groups, Stage, etc.
Dimensions: Microphone: 5.69 x .46" (144.5 x 11.7mm) LxDiameter
Preamp: 4.84 x .75" (123.1 x 19mm) LxDiameter
Cable: 30' (9m)
Weight: 17.8 oz. (504.6 g) (With Cartridge Installed)

MX202WP/N

$147.00

Compare

MX202WP/N

List Price: ~~$157.00~~

Your Price: $147.00

Vendor Name

MX202WP/N

Quantity:

Shure

Microflex wverhead Microphones

Condenser: Lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances. Powered by battery or phantom power supply.

It is hard to believe that such small, unobtrusive microphones can produce such great sound, but it's true. Available in black or white finishes, and with in-line or plate mount preamps, MX202 Microflex Overhead condenser microphones capture high-quality sound in a compact, adjustable package. Each model features a choice of interchangeable cardioid or supercardioid condenser microphone cartridges attached to a flexible, four inch gooseneck with a 30 foot cable.

Available Options: MX202WP/N White mini-condenser mic; includes cable and plate-mounted preamplifier, No Cartridge

Features:

Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges that provide an optimal polar pattern choice for each application
Balanced, transformerless output for increased immunity to noise over long cable runs
Supplied stand-mount adapter for portable applications (in-line preamplifier versions only)
White or black finish that blends unobtrusively with most surroundings
Preamp options available offer easy installation in ceilings or microphone stands
When combined with the high sensitivity cartridge's wide frequency response, these microphones provide accurate sound reproduction with minimum RF interference or electromagnetic hum

Frequency Response: 50 to 17,000 Hz
Output Impedance: 180 ohms actual (EIA rated at 150 ohms)
Sensitivity (At 1,000 Hz, open circuit voltage*): Omnidirectional: -27.5 dBV/Pa (42.2 mV), All values -12 dB at 0 gain; *1 Pascal = 94 dB SPL
Maximum SPL (1 kHz at 1% THD, 1 k ohm load): Omnidirectional: 116.7 dB, All values +6 dB at 0 gain
Equivalent Output Noise (A-weighted): Omnidirectional: 20.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL): Omnidirectional: 73.5 dB
Dynamic Range at 1 k ohm load: 96.2 dB, 100 dB at 0 gain
Common Mode Rejection: 45.0 dB minimum
Preamplifier Output Clipping Level (1% THD): -6.0 dBV (0.5 V), -12 dBV at 0 gain
Polarity: Positive sound pressure on diaphragm produces positive, voltage on pin 2 relative to pin 3 of output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements: Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F), Relative Humidity: 0 to 95%
Dimensions: See User Guide

MX202W/N

$147.00

Compare

MX202W/N

List Price: ~~$157.00~~

Your Price: $147.00

Vendor Name

MX202W/N

Quantity:

Shure

Microflex wverhead Microphones

Condenser: Lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances. Powered by battery or phantom power supply.

It is hard to believe that such small, unobtrusive microphones can produce such great sound, but it's true. Available in black or white finishes, and with in-line or plate mount preamps, MX202 Microflex Overhead condenser microphones capture high-quality sound in a compact, adjustable package. Each model features a choice of interchangeable cardioid or supercardioid condenser microphone cartridges attached to a flexible, four inch gooseneck with a 30 foot cable.

Available Options: MX202W/N White mini-condenser mic, w/cable, in-line preamp, stand adapter, No Cartridge

Features:

Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges that provide an optimal polar pattern choice for each application
Balanced, transformerless output for increased immunity to noise over long cable runs
Supplied stand-mount adapter for portable applications (in-line preamplifier versions only)
White or black finish that blends unobtrusively with most surroundings
Preamp options available offer easy installation in ceilings or microphone stands
When combined with the high sensitivity cartridge's wide frequency response, these microphones provide accurate sound reproduction with minimum RF interference or electromagnetic hum

MX202BP/N

$147.00

Compare

MX202BP/N

List Price: ~~$157.00~~

Your Price: $147.00

Vendor Name

MX202BP/N

Quantity:

Shure

Microflex wverhead Microphones

Condenser: Lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances. Powered by battery or phantom power supply.

It is hard to believe that such small, unobtrusive microphones can produce such great sound, but it's true. Available in black or white finishes, and with in-line or plate mount preamps, MX202 Microflex Overhead condenser microphones capture high-quality sound in a compact, adjustable package. Each model features a choice of interchangeable cardioid or supercardioid condenser microphone cartridges attached to a flexible, four inch gooseneck with a 30 foot cable.

Available Options: MX202BP/N Black mini-condenser mic; includes cable and plate-mounted preamplifier, No Cartridge

Features:

Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges that provide an optimal polar pattern choice for each application
Balanced, transformerless output for increased immunity to noise over long cable runs
Supplied stand-mount adapter for portable applications (in-line preamplifier versions only)
White or black finish that blends unobtrusively with most surroundings
Preamp options available offer easy installation in ceilings or microphone stands
When combined with the high sensitivity cartridge's wide frequency response, these microphones provide accurate sound reproduction with minimum RF interference or electromagnetic hum

US602FL

$149.00

Compare

MXL FR-300

$155.26

Compare

MXL FR-300

List Price: ~~$169.95~~

Your Price: $155.26

Vendor Name

MXL FR-300

Quantity:

MXL Marshall

The MXL FR-300 phantom-powered shotgun microphone allows videographers to reach out to subjects for clear, high quality recording. The MXL FR-300 can also be used for general video recordings like weddings as well as for Foley work, interviews, and other times when the distance to the subject is further than the built-in camera mic will allow.

Features:

Capsule Size: 14mm
Length: 10"
FET Preamp
Frequency Response: 50Hz-18KHz
Sensitivity: 45mV/Pa
Impedance: 100 ohms
Max SPL: 123 dB
Signal-to-Noise Ratio: 75 dB
Operating Voltage: 9-52V

PRO8HEX

$159.00

Compare

PRO8HEX

List Price: ~~$159.00~~

Your Price: $159.00

Vendor Name

PRO8HEX

Quantity:

Audio Technica

PRO8HEX

Offering highly intelligible individual voice reproduction, the comfortable, lightweight PRO8HEx is ideal for guitarists, keyboard players, drummers and others who need the use of their hands during performance. Its low-visibility headband and cushioned support pads provide a stable, comfortable fit. Designed for professional quality vocal pickup with hands-free operation, the PRO8HEx features a pivot-mounted flexible mic boom that descends from either the left or right side.

Features:

Ideal for guitarists, keyboard players, drummers and others who need the use of their hands during performance
Low-visibility headband and cushioned support pads provide a stable, comfortable fit
Pivot-mounted flexible mic boom descends from left or right side
Hypercardioid polar pattern improves isolation of desired sound source
Hi-ENERGY neodymium element for articulate vocal reproduction
7.2' (2.2 m) cable permanently attached between microphone and XLRM-type connector

Element: Dynamic
Polar Pattern: Hypercardioid
Frequency Response: 200-18,000 Hz
Open Circuit Sensitivity: -55 dB (1.7 mV) re 1V at 1 Pa
Impedance: 600 ohms
Weight: 2.1 oz (60 g)
Output Connector: 3-pin XLRM-type on cable
Cable: 7.2' (2.2 m) long, 0.11" (2.8 mm) diameter miniature audio cable permanently attached between microphone and XLRM-type connector
Accessories: AT8139L large windscreen; AT8139S small windscreen; AT8439 clothing clip

MXL FR-304

$166.45

Compare

MXL FR-304

List Price: ~~$189.95~~

Your Price: $166.45

Vendor Name

MXL FR-304

Quantity:

MXL Marshall

The MXL FR-304 Shotgun Microphone is a great choice for the semi-pro or professional videographer on the go. The FR-304 can be used in a variety of situations either under its own power or via camera and is supplied with a standard AA battery with 160+ hour life.

Features:

Versatile shotgun mic with FET Preamp
Self powered via AA battery or camera supplied power
Capsule Size: 14mm
Length: 14.5"
FET Preamp
Frequency Response: 50Hz-20KHz
Sensitivity: 15mV/Pa
Impedance: 100 ohms
Max SPL: 124 dB
Signal-to-Noise Ratio: 72 dB
Dynamic Range: 102 dB
Operating Voltage: 1.5V AA Battery or 48V PPS
Battery life: 160+ hours

MX395B/O

$168.00

Compare

MX395B/O

List Price: ~~$180.00~~

Your Price: $168.00

Vendor Name

MX395B/O

Quantity:

Shure

MX395B/O

Omnidirectional Low Profile Boundary Microphone, Black, 3-Pin XLR

The Microflex Low Profile Boundary Microphone is an ideal table Microphone
when minimal presence is of high priority. Perfect for meeting rooms, these
microphones deliver exceptional Sound pickup while barely being noticed.
Choose from a selection of colors and pickup patterns for customized table
installations.

Features:

Only 1.25 inch (3.8 cm) in diameter
Cardioid, omni and Bidirectional Polar Patterns
Wide Dynamic Range and smooth Frequency Response
Available in black, white and Aluminum
Bi-color status indicator available with -LED models
Logic input for remote LED control
CommShield Technology

Type: Condenser (Electret Bias)
Frequency Response: 50-17000 Hz
Polar Pattern:MX395/O: OmnidirectionalMX395/C: CardioidMX395/BI: Bidirectional
Output Impedance: EIA Rated at 150 &Amp;#937; (170 &Amp;#937; actual)
Output Configuration: Active Balanced
Sensitivity (at 1 kHz , open circuit Voltage):Cardioid: -35 dBV/PA (18 mV)Omnidirectional: -28 dBV/PA (42 mV)Bidirectional: -37 dBV/PA (14 mV)1 Pascal=94 dB SPL
Maximum SPL (1 kHz at 1% THD, 1 k&Amp;#937; load):Cardioid: 121 dBOmnidirectional: 114 dBBidirectional: 123 dB
Equivalent output Noise (A-Weighted):Cardioid: 28 dB SPLOmnidirectional: 21 dB SPLBidirectional: 29 dB
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz):Cardioid: 66 dBOmnidirectional: 73 dBBidirectional: 65 dB
Dynamic Range (1 k&Amp;#937; load at 1 kHz):Cardioid: 93 dBOmnidirectional: 93 dBBidirectional: 94 dB
Common Mode Rejection (10 Hz-100 kHz): 45 dB minimum
Preamplifier output Clipping Level (1% THD): -8 dBV (0.4 V)
Polarity:3-Pin XLR: Positive Sound Pressure on Diaphragm produces positive Voltage on pin 2 relative to pin 3 of output XLR Connector.5-Pin XLR: Positive Sound Pressure on Diaphragm produces positive Voltage on pin 4 relative to pin 2 of output XLR Connector.
Weight :Net: 0.136 kg (0.30 lbs.)Packaged: 0.374 kg (0.825 lbs.)
Logic Connections:LED IN: Active low (&Amp;#8804;1.0V), TTL compatible. Absolute maximum Voltage:-0.7V to 50V.
Environmental Conditions:Operating Temperature: -18-57 C (0-135 F)Storage Temperature: -29-74 C (-20-165 F)Relative Humidity: 0-95%
Power Requirements:MX395: 11-52 Vdc phantom, 2.0 mAMX395-LED: 48-52 Vdc phantom, 8.0 mA

MX395AL/O

$168.00

Compare

MX395AL/O

List Price: ~~$180.00~~

Your Price: $168.00

Vendor Name

MX395AL/O

Quantity:

Shure

MX395AL/O

Omnidirectional Low Profile Boundary Microphone, Brushed Aluminum, 3-Pin XLR

The Microflex Low Profile Boundary Microphone is an ideal table Microphone
when minimal presence is of high priority. Perfect for meeting rooms, these
microphones deliver exceptional Sound pickup while barely being noticed.
Choose from a selection of colors and pickup patterns for customized table
installations.

Features:

Only 1.25 inch (3.8 cm) in diameter
Cardioid, omni and Bidirectional Polar Patterns
Wide Dynamic Range and smooth Frequency Response
Available in black, white and Aluminum
Bi-color status indicator available with -LED models
Logic input for remote LED control
CommShield Technology

MXL FR-400

$175.35

Compare

MXL FR-400

List Price: ~~$199.95~~

Your Price: $175.35

Vendor Name

MXL FR-400

Quantity:

MXL Marshall

Although it's commonly used in front of a stage to pickup concerts or theater events, the FR-400 boundary mic has a wide cardioid pattern and can be used in other applications like under the lid of a piano. The switch located on the bottom of the mic can be used to boost or cut low frequencies by 6 dB in order to balance the frequency response.

Features:

Wide cardioid pickup pattern
Ideal for stage, live performances, instrumental recordings and more!
Includes bass cut/boost switch

Type: Boundary mic with 3-capsule array
Polar Pattern: 120 degree cardioid
Frequency Response: 50Hz - 16kHz
Max SPL: 120 dB
Sensitivity: 45mV/Pa
Output Impedance: 200 ohms
Operating Voltage: 48V Phantom Power
Signal-to-Noise Ratio: 72 dB
Includes: Bass Cut/Boost switch

MX395B/C

$176.40

Compare

MX395B/C

List Price: ~~$188.00~~

Your Price: $176.40

Vendor Name

MX395B/C

Quantity:

Shure

Microflex Low Profile Boundary Microphone

The Microflex Low Profile Boundary microphone is an ideal table microphone when minimal presence is of high priority. Perfect for meeting rooms, these microphones deliver exceptional sound pickup while barely being noticed. Choose from a selection of colors and pickup patterns for customized table installations.

Available Options
MX395B/C: Black, 5-pin, XLR, logic-controlled

Features:

Only 1.25 inch (3.8 cm) in diameter
Cardioid, omni and bidirectional polar patterns
Wide dynamic range and smooth frequency response
Available in black, white and aluminum
Bi-color status indicator available with -LED models
Logic input for remote LED control
CommShield Technology

Type: Condenser (electret bias)
Frequency Response: 50 to 17000 Hz
Polar Pattern: MX395/C: Cardioid
Output Impedance: EIA Rated at 150 Ohms (170 Ohms actual)
Output Configuration: Active balanced
Sensitivity (at 1 kHz , open circuit voltage): Cardioid: -35 dBV/Pa (18 mV)
Maximum SPL (1 kHz at 1% THD, 1 kilohms load): Cardioid: 121 dB
Equivalent output Noise (A-weighted): Omnidirectional: 21 dB SPL
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): Cardioid: 66 dB
Dynamic Range (1 kilohm load at 1 kHz): Cardioid: 93 dB
Common Mode Rejection (10 Hz - 100 kHz): 45 dB minimum
Preamplifier output Clipping level (1% THD): -8 dBV (0.4 V)
Polarity: 3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector. , 5-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector.
Weight: Net: 0.136 kg (0.30 lbs.) , Packaged: 0.374 kg (0.825 lbs.)
Logic Connections: LED IN: Active low (=1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V.
Environmental Conditions: Operating Temperature: -18 to 57 deg. C (0 to 135 deg. F) , Storage Temperature: -29 to 74 deg. C (-20 to 165 deg. F) , Relative Humidity: 0 to 95%
Power Requirements: MX395: 11 - 52 Vdc phantom, 2.0 mA , MX395-LED: 48 - 52 Vdc phantom, 8.0 mA

MX395AL/C

$176.40

Compare

MX395AL/C

List Price: ~~$188.00~~

Your Price: $176.40

Vendor Name

MX395AL/C

Quantity:

Shure

MX395AL/C

Cardioid Low Profile Boundary Microphone, Brushed Aluminum, 3-Pin XLR

The Microflex Low Profile Boundary Microphone is an ideal table Microphone
when minimal presence is of high priority. Perfect for meeting rooms, these
microphones deliver exceptional Sound pickup while barely being noticed.
Choose from a selection of colors and pickup patterns for customized table
installations.

Features:

Only 1.25 inch (3.8 cm) in diameter
Cardioid, omni and Bidirectional Polar Patterns
Wide Dynamic Range and smooth Frequency Response
Available in black, white and Aluminum
Bi-color status indicator available with -LED models
Logic input for remote LED control
CommShield Technology

MX391W/O

$183.40

Compare

MX391W/O

List Price: ~~$197.00~~

Your Price: $183.40

Vendor Name

MX391W/O

Quantity:

Shure

Microflex Boundary Microphone

Equipped with features like programmable, silent membrane switches, logic inputs and outputs, and LED indicators, Microflex Boundary Microphones are the high-quality solution for a range of applications such as altars, boardrooms and distance learning centers. Every Microflex Boundary microphone features a choice of interchangeable condenser cartridges.

MX391: Includes attached 4 meter (12 ft) cable terminated with a 4-pin mini connector and separate preamplifier. A rubber strain relief is provided for applications that require removing the 4-pin mini connector and connecting the mic cable directly to screw terminals in the preamplifier.

Available Options
MX391W/O: Omnidirectional, White

Features:

Flat frequency response across the vocal range for uncolored sound
Interchangeable omnidirectional cartridges that provide optimal choice for each application
Sleek, low-profile design for unobtrusive appearance
Balanced, transformerless output for increased immunity to noise over long cable runs
Programmable on/off switch and LED on/off indicator (MX392/MX393 models only)
LED logic input and switch logic output terminals for remote control or use with automatic mixers (MX392 models only)

Polar Pattern: Omnidirectional MX391W/O
Environmental Requirements: Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F), Relative Humidity: 0 to 95%
Dimensions: See User Guide
Preamplifier Specifications MX391 Only: These specifications apply only to the MX391/MX391W microphones when used with the supplied preamplifier. All measurements taken with the microphone mounted on a 76.2 cm x 76.2 cm (30 in. x 30 in.) wooden surface and with the sound source incident at 30 degrees with respect to the surface plane.
Frequency Response: 50 to 17,000 Hz
Output Impedance (at 1000 Hz): 180 ohms actual (rated at 150 ohms)
Open Circuit Sensitivity 1 kHz ref. 1 V per Pascal: Omnidirectional: -21.5 dB (81.4 mV), All settings -12 dB at 0 gain; *1 Pascal = 94 dB SPL
Maximum Sound Pressure Level (1 kHz at 1% Total Harmonic Distortion, 1 k ohm load): Omnidirectional: 110.7 dB, All settings +6 dB at 0 gain
Signal to Noise Ratio (referenced at 94 dB SPL): Omnidirectional: 79.5 dB
Equivalent Output Noise (A-weighted): Omnidirectional: 14.5 dB SPL
Dynamic Range at 1 k ohm Load: 96.2 dB, 100 dB at 0 gain
Common Mode Rejection: 45 dB minimum, 10 Hz to 100 kHz
Preamplifier Output Clipping Level: -6 dBV (0.5 V), 12 dB at 0 gain
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the preamplifier XLR output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA current consumption

MX391/O

$183.40

Compare

MX391/O

List Price: ~~$197.00~~

Your Price: $183.40

Vendor Name

MX391/O

Quantity:

Shure

Flat frequency response across the vocal range for uncolored sound
Interchangeable omnidirectional cartridges that provide optimal choice for each application
Sleek, low-profile design for unobtrusive appearance
Balanced, transformerless output for increased immunity to noise over long cable runs
Programmable on/off switch and LED on/off indicator (MX392/MX393 models only)
LED logic input and switch logic output terminals for remote control or use with automatic mixers (MX392 models only)

Polar Pattern: Omnidirectional MX391/O
Environmental Requirements: Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F), Relative Humidity: 0 to 95%
Dimensions: See User Guide
Preamplifier Specifications MX391 Only: These specifications apply only to the MX391/MX391W microphones when used with the supplied preamplifier. All measurements taken with the microphone mounted on a 76.2 cm x 76.2 cm (30 in. x 30 in.) wooden surface and with the sound source incident at 30 degrees with respect to the surface plane.
Frequency Response: 50 to 17,000 Hz
Output Impedance (at 1000 Hz): 180 ohms actual (rated at 150 ohms)
Open Circuit Sensitivity 1 kHz ref. 1 V per Pascal: Omnidirectional: -21.5 dB (81.4 mV), All settings -12 dB at 0 gain; *1 Pascal = 94 dB SPL
Maximum Sound Pressure Level (1 kHz at 1% Total Harmonic Distortion, 1 k ohm load): Omnidirectional: 110.7 dB, All settings +6 dB at 0 gain
Signal to Noise Ratio (referenced at 94 dB SPL): Omnidirectional: 79.5 dB
Equivalent Output Noise (A-weighted): Omnidirectional: 14.5 dB SPL
Dynamic Range at 1 k ohm Load: 96.2 dB, 100 dB at 0 gain
Common Mode Rejection: 45 dB minimum, 10 Hz to 100 kHz
Preamplifier Output Clipping Level: -6 dBV (0.5 V), 12 dB at 0 gain
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the preamplifier XLR output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA current consumption

MX395B/O-LED

$184.80

Compare

MX395B/O-LED

List Price: ~~$198.00~~

Your Price: $184.80

Vendor Name

MX395B/O-LED

Quantity:

Shure

MX395B/O-LED

Omnidirectional Low Profile Boundary Microphone with Remoteable LED Ring, Black, 5-Pin XLR

The Microflex Low Profile Boundary Microphone is an ideal table Microphone
when minimal presence is of high priority. Perfect for meeting rooms, these
microphones deliver exceptional Sound pickup while barely being noticed.
Choose from a selection of colors and pickup patterns for customized table
installations.

Features:

Only 1.25 inch (3.8 cm) in diameter
Cardioid, omni and Bidirectional Polar Patterns
Wide Dynamic Range and smooth Frequency Response
Available in black, white and Aluminum
Bi-color status indicator available with -LED models
Logic input for remote LED control
CommShield Technology

DMK-7

$189.99

Compare

MX395W/O

$193.20

Compare

MX395W/O

List Price: ~~$206.00~~

Your Price: $193.20

Vendor Name

MX395W/O

Quantity:

Shure

Only 1.25 inch (3.8 cm) in diameter
Cardioid, omni and bidirectional polar patterns
Wide dynamic range and smooth frequency response
Available in black, white and aluminum
Bi-color status indicator available with -LED models
Logic input for remote LED control
CommShield Technology

Type: Condenser (electret bias)
Frequency Response: 50 to 17000 Hz
Polar Pattern: MX395/O: Omnidirectional
Output Impedance: EIA Rated at 150 Ohms (170 Ohms actual)
Output Configuration: Active balanced
Sensitivity (at 1 kHz , open circuit voltage): Omnidirectional: -28 dBV/Pa (42 mV)
Maximum SPL (1 kHz at 1% THD, 1 kilohms load): Omnidirectional: 114 dB
Equivalent output Noise (A-weighted): Omnidirectional: 21 dB SPL
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): Omnidirectional: 73 dB
Dynamic Range (1 kilohm load at 1 kHz): Omnidirectional: 93 dB
Common Mode Rejection (10 Hz - 100 kHz): 45 dB minimum
Preamplifier output Clipping level (1% THD): -8 dBV (0.4 V)
Polarity: 3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector. , 5-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector.
Weight: Net: 0.136 kg (0.30 lbs.) , Packaged: 0.374 kg (0.825 lbs.)
Logic Connections: LED IN: Active low (=1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V.
Environmental Conditions: Operating Temperature: -18 to 57 deg. C (0 to 135 deg. F) , Storage Temperature: -29 to 74 deg. C (-20 to 165 deg. F) , Relative Humidity: 0 to 95%
Power Requirements: MX395: 11 - 52 Vdc phantom, 2.0 mA , MX395-LED: 48 - 52 Vdc phantom, 8.0 mA

MX395B/C-LED

$193.20

Compare

MX395B/C-LED

List Price: ~~$206.00~~

Your Price: $193.20

Vendor Name

MX395B/C-LED

Quantity:

Shure

MX395B/C-LED

Cardioid Low Profile Boundary Microphone with Remoteable LED Ring, Black, 5-Pin XLR

The Microflex Low Profile Boundary Microphone is an ideal table Microphone
when minimal presence is of high priority. Perfect for meeting rooms, these
microphones deliver exceptional Sound pickup while barely being noticed.
Choose from a selection of colors and pickup patterns for customized table
installations.

Features:

Only 1.25 inch (3.8 cm) in diameter
Cardioid, omni and Bidirectional Polar Patterns
Wide Dynamic Range and smooth Frequency Response
Available in black, white and Aluminum
Bi-color status indicator available with -LED models
Logic input for remote LED control
CommShield Technology

MX391W/C

$198.80

Compare

MX391W/C

List Price: ~~$213.00~~

Your Price: $198.80

Vendor Name

MX391W/C

Quantity:

Shure

Flat frequency response across the vocal range for uncolored sound
Interchangeable cardioid cartridges that provide optimal choice for each application
Sleek, low-profile design for unobtrusive appearance
Balanced, transformerless output for increased immunity to noise over long cable runs
Programmable on/off switch and LED on/off indicator (MX392/MX393 models only)
LED logic input and switch logic output terminals for remote control or use with automatic mixers (MX392 models only)

Polar Pattern: Cardioid MX391W/C
Environmental Requirements: Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F), Relative Humidity: 0 to 95%
Dimensions: See User Guide
Preamplifier Specifications MX391 Only: These specifications apply only to the MX391/MX391W microphones when used with the supplied preamplifier. All measurements taken with the microphone mounted on a 76.2 cm x 76.2 cm (30 in. x 30 in.) wooden surface and with the sound source incident at 30 degrees with respect to the surface plane.
Frequency Response: 50 to 17,000 Hz
Output Impedance (at 1000 Hz): 180 ohms actual (rated at 150 ohms)
Open Circuit Sensitivity 1 kHz ref. 1 V per Pascal: Cardioid: -29.6 dB (33.5 mV), All settings -12 dB at 0 gain; *1 Pascal = 94 dB SPL
Maximum Sound Pressure Level (1 kHz at 1% Total Harmonic Distortion, 1 k ohm load): Cardioid: 118.8 dB, All settings +6 dB at 0 gain
Signal to Noise Ratio (referenced at 94 dB SPL): Cardioid: 71.4 dB
Equivalent Output Noise (A-weighted): Cardioid: 22.6 dB SPL
Dynamic Range at 1 k ohm Load: 96.2 dB, 100 dB at 0 gain
Common Mode Rejection: 45 dB minimum, 10 Hz to 100 kHz
Preamplifier Output Clipping Level: -6 dBV (0.5 V), 12 dB at 0 gain
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the preamplifier XLR output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA current consumption

MX391/C

$198.80

Compare

MX391/C

List Price: ~~$213.00~~

Your Price: $198.80

Vendor Name

MX391/C

Quantity:

Shure

Flat frequency response across the vocal range for uncolored sound
Interchangeable cardioid cartridges that provide optimal choice for each application
Sleek, low-profile design for unobtrusive appearance
Balanced, transformerless output for increased immunity to noise over long cable runs
Programmable on/off switch and LED on/off indicator (MX392/MX393 models only)
LED logic input and switch logic output terminals for remote control or use with automatic mixers (MX392 models only)

Polar Pattern: Cardioid MX391/C
Environmental Requirements: Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F), Relative Humidity: 0 to 95%
Dimensions: See User Guide
Preamplifier Specifications MX391 Only: These specifications apply only to the MX391/MX391W microphones when used with the supplied preamplifier. All measurements taken with the microphone mounted on a 76.2 cm x 76.2 cm (30 in. x 30 in.) wooden surface and with the sound source incident at 30 degrees with respect to the surface plane.
Frequency Response: 50 to 17,000 Hz
Output Impedance (at 1000 Hz): 180 ohms actual (rated at 150 ohms)
Open Circuit Sensitivity 1 kHz ref. 1 V per Pascal: Cardioid: -29.6 dB (33.5 mV), All settings -12 dB at 0 gain; *1 Pascal = 94 dB SPL
Maximum Sound Pressure Level (1 kHz at 1% Total Harmonic Distortion, 1 k ohm load): Cardioid: 118.8 dB, All settings +6 dB at 0 gain
Signal to Noise Ratio (referenced at 94 dB SPL): Cardioid: 71.4 dB
Equivalent Output Noise (A-weighted): Cardioid: 22.6 dB SPL
Dynamic Range at 1 k ohm Load: 96.2 dB, 100 dB at 0 gain
Common Mode Rejection: 45 dB minimum, 10 Hz to 100 kHz
Preamplifier Output Clipping Level: -6 dBV (0.5 V), 12 dB at 0 gain
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the preamplifier XLR output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA current consumption

MX202W/C

$198.80

Compare

MX202W/C

List Price: ~~$213.00~~

Your Price: $198.80

Vendor Name

MX202W/C

Quantity:

Shure

Microflex wverhead Microphones

Condenser: Lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances. Powered by battery or phantom power supply.

It is hard to believe that such small, unobtrusive microphones can produce such great sound, but it's true. Available in black or white finishes, and with in-line or plate mount preamps, MX202 Microflex Overhead condenser microphones capture high-quality sound in a compact, adjustable package. Each model features a choice of interchangeable cardioid or supercardioid condenser microphone cartridges attached to a flexible, four inch gooseneck with a 30 foot cable.

Available Options: MX202W/C White mini-condenser Cardioid mic, w/cable, in-line preamp, stand adapte.

Features:

Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges that provide an optimal polar pattern choice for each application
Balanced, transformerless output for increased immunity to noise over long cable runs
Supplied stand-mount adapter for portable applications (in-line preamplifier versions only)
White or black finish that blends unobtrusively with most surroundings
Preamp options available offer easy installation in ceilings or microphone stands
When combined with the high sensitivity cartridge's wide frequency response, these microphones provide accurate sound reproduction with minimum RF interference or electromagnetic hum

Frequency Response: 50 to 17,000 Hz

Output Impedance: 180 ohms actual (EIA rated at 150 ohms)

Sensitivity (At 1,000 Hz, open circuit voltage*): Cardioid: -35.0 dBV/Pa (17.8 mV), All values -12 dB at 0 gain; *1 Pascal = 94 dB SPL

Maximum SPL (1 kHz at 1% THD, 1 k ohm load): Cardioid: 124.2 dB, All values +6 dB at 0 gain

Equivalent Output Noise (A-weighted): Cardioid: 28.0 dB SPL

Signal to Noise Ratio (referenced at

MX202BP/C

$198.80

Compare

MX202BP/C

List Price: ~~$213.00~~

Your Price: $198.80

Vendor Name

MX202BP/C

Quantity:

Shure

Microflex wverhead Microphones

Condenser: Lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances. Powered by battery or phantom power supply.

It is hard to believe that such small, unobtrusive microphones can produce such great sound, but it's true. Available in black or white finishes, and with in-line or plate mount preamps, MX202 Microflex Overhead condenser microphones capture high-quality sound in a compact, adjustable package. Each model features a choice of interchangeable cardioid or supercardioid condenser microphone cartridges attached to a flexible, four inch gooseneck with a 30 foot cable.

Available Options: MX202BP/C Black mini-condenser Cardioid mic; includes cable and plate-mounted preamplifier

Features:

Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges that provide an optimal polar pattern choice for each application
Balanced, transformerless output for increased immunity to noise over long cable runs
Supplied stand-mount adapter for portable applications (in-line preamplifier versions only)
White or black finish that blends unobtrusively with most surroundings
Preamp options available offer easy installation in ceilings or microphone stands
When combined with the high sensitivity cartridge's wide frequency response, these microphones provide accurate sound reproduction with minimum RF interference or electromagnetic hum

MX202B/C

$198.80

Compare

MX202B/C

List Price: ~~$213.00~~

Your Price: $198.80

Vendor Name

MX202B/C

Quantity:

Shure

Microflex wverhead Microphones

Condenser: Lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances. Powered by battery or phantom power supply.

It is hard to believe that such small, unobtrusive microphones can produce such great sound, but it's true. Available in black or white finishes, and with in-line or plate mount preamps, MX202 Microflex Overhead condenser microphones capture high-quality sound in a compact, adjustable package. Each model features a choice of interchangeable cardioid or supercardioid condenser microphone cartridges attached to a flexible, four inch gooseneck with a 30 foot cable.

Available Options: MX202B/C Black mini-condenser Cardioid mic, w/cable, in-line preamp, stand adapter

Features:

Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges that provide an optimal polar pattern choice for each application
Balanced, transformerless output for increased immunity to noise over long cable runs
Supplied stand-mount adapter for portable applications (in-line preamplifier versions only)
White or black finish that blends unobtrusively with most surroundings
Preamp options available offer easy installation in ceilings or microphone stands
When combined with the high sensitivity cartridge's wide frequency response, these microphones provide accurate sound reproduction with minimum RF interference or electromagnetic hum