The Gemini UHF-116 UHF Wireless Microphone System is designed to provide clear, natural sound in any environment over longer distances. The UHF-116 system provides users with a range of up to 250 feet over 16 selectable frequencies to ensure optimal transmission with no interference.
UHF-116HL comes with HEADSET/LAVALIER combo mic
The UHF-116HL comes with the UHF-116 receiver and the HSL-08 combo headset/lavaliere that provides crisp, clear hands free sound.
The UHF-116 provides unmatched performance and affordability in a wireless system for presentations, houses of worship, vocalists, musicians, DJ’s and public speaking venues.
Features:
High quality (single channel) UHF receiver with 250’ range
US: 16 operating frequencies between 682 MHz and 697 MHz
EUR: 16 operating frequencies between 854 MHz and 864 MHz
Phase Locked Loop (PLL) circuitry for increased reception
RF and AF LED indicators for monitoring incoming signal strength
Auto mute with squelch control and built-in noise reduction
Nady Encore I LT/HM-3 Headset Systems Loaded with top professional operating features Available on selected frequencies in the VHF high-band (171-216 MHz) for interference-free, long-range performance Half-rack receiver design with retractable front panel antenna(s) RF and AF 5-LED displays for monitoring incoming signal strength and audio level Balanced XLR and unbalanced adjustable 1/4" jack outputs (Encore Duet: Dual XLR and single mixed 1/4" outputs) Unique snap-out panel locking tab
The Nady Encore II LT/HM3 is loaded with top professional operating features. Designed specifically for wireless, cable-free transmission of vocals. The HM-3 headset has a high quality condensor mic suitable for both speaking and singing.
HM-3 Headset The included HM-3 headset has a high quality, omni-directional condensor microphone that is suitable for both singing and speaking applications. The condensor mic is powered by the WLT-15 transmitter. The headset is lightweight and designed for long comfortable wear. The omni-directional condenser element provides exceptional audio with excellent transparency and gain before feedback.
Encore II VHF Receiver Available on selected frequencies in the VHF high-band (171-216 MHz) for interference-free, long-range performance. Convenient half-rack receiver design with retractable front panel antennas. Includes both RF and AF 5-LED displays for monitoring incoming signal strength and audio level. The receiver has balanced XLR and unbalanced adjustable 1/4" jack outputs to work with any amplifier, mixer or PA system. Includes a unique snap-out panel locking tabs for single receiver or dual receiver (side-by-side) optional rack mounting.
The Encore II receiver includes Nady's proprietary DigiTRU Diversityâ„¢ digital processing circuitry to eliminate dropouts and maximize operating range. A specially designed circuit provides noiseless transmitter ON/OFF switching to avoid "pop".
WLT-15 Bodypack Transmitter The included WLT-15 transmitter connects directly to the included headset and clips onto your belt for convenient access. An OFF/STANDBY/ON swith allows convenient audio muting withthe transmitter "ON". There is also an easily accessible input level adjust control for optimum sound. A low battery LED indicator flashes once for unit "ON"; lights steady for low battery alert. Operates on a single 9V alkaline battery operation.
The Encore I Wireless Headset Systems are full of top professional operating features and are hands free, thanks to the HM Series Headset. The Wireless Headset Systems are great for any type of performance or conference that requires vocals and you need your hands free.
Features:
Loaded with top professional operating features
Available on selected frequencies in the VHF high-band (171-216 MHz) for interference-free, long-range performance
Half-rack receiver design with retractable front panel antennas; single or dual receiver (side-by-side) optional rackmounting
RF and AF 5-LED displays for monitoring incoming signal strength and audio level; balanced XLR and unbalanced adjustable ¼” jack output
Unique snap-out panel locking tabs for single receiver or dual receiver (side-by-side) optional rackmounting
Noiseless transmitter On/Off switching
Features the Nady DM-20 unidirectional dynamic cartridge for optimum true sound, maximum feedback rejection and minimal handling noise
Operates up to 15 hours on a single 9V alkaline battery
Locking 3.5mm mini-jack provides secure connection for removable microphone or instrument cable
Easily accessible Input Level Adjust for optimum sound
Choice of three transmitters: WHT, WLT/WGT, or WPM-1V
WLT Bodypack Transmitters:
Choice of instrument, Headmic™ or lapel microphone bodypack transmitter for use with LM-14O omnidirectional or LM-14U unidirectional lapel microphone or Headmic™ Series microphones
Off/Standby/On switch allows convenient audio muting with the transmitter on
Input level adjust
Locking 3.5mm jack
LED status indicator flashes once for unit on, lights steady for low-battery alert
HM1 Headset:
Uni-directional dynamic element for top audio response — perfect for even the most exacting singing/performance applications
Adjustable gooseneck which can be set at any angle required by the user. The head worn support system is extremely light and
comfortable, and is designed to be visually unobtrusive while worn
Its ear rests and temple provide maximum stability during use, even while moving, dancing, or shaking the head. The durable cable
assembly and internal construction are designed to minimize handling noise from contact and movement
Available with Mini-XLR or 3.5mm phone plug for wired and wireless applications (fits most standard wireless bodypack transmitters)
The Nady Encore 1 LT/HM-10 is a high-band VHF wireless headband mic system for reliable and interference-free, long-range wireless performance. With a WLT-15 bodypack transmitter and an HM-10 dynamic headband mic included, the Nady Encore 1 LT/HM-3 provides about 250 feet (depending on conditions of site, 500+ optimum line-of-sight) of operating range, so you're no longer stuck with a measly 20 or 30 foot cord! And, the fully featured, single-antenna Encore 1 R receiver connects to any receiver or amp with 1/4" or XLR inputs, while the front panel displays RF and audio signal levels. This system is also available with an included condenser headband mic: the Encore 1 LT/HM-3 headband wireless mic system.
Another key feature of the Encore are the unique snap-out panel locking tabs for single receiver or dual receiver (side by side) optional rack mounting.
Upgrades from this item include the Encore II full diversity microphone system with choices of the ENC11HT handheld microphone, or the ENC11LT lavaliere microphone; the Encore Duet microphone system with your choice of a lavaliere microphone ENCDLT, or both; model number ENCDHTLT.
The other optional upgrade is the fully loaded Nady 401 microphone systems with four channels and your choice of any four microphones; the 401 HT with four handheld microphones; the 401 LT with four lavaliere microphones; and the 401 LT/HT with two handheld and two lavaliere microphones.
If you are interested in a wireless microphone system with a dual channel receiver and your choice of microphones, you may want to consider the T1288/85 from Shure.
Features:
Easy to use
5 LED displays for monitoring incoming signal strength and audio level
Receiver designed with retractable front panel antennas
VHF high-band
Loaded with top professional features
Balanced XLR and unbalanced adjustable 1/4" inputs
The Encore II Wireless Headset Systems are full of top professional operating features and are hands free, thanks to the HM Series Headset. The Wireless Headset Systems are great for any type of performance or conference that requires vocals and you need your hands free.
Features:
Loaded with top professional operating features
Available on selected frequencies in the VHF high-band (171-216 MHz) for interference-free, long-range performance
Half-rack receiver design with retractable front panel antennas; single or dual receiver (side-by-side) optional rackmounting
RF and AF 5-LED displays for monitoring incoming signal strength and audio level; balanced XLR and unbalanced adjustable ¼” jack output
Unique snap-out panel locking tabs for single receiver or dual receiver (side-by-side) optional rackmounting
Noiseless transmitter On/Off switching
Features the Nady DM-20 unidirectional dynamic cartridge for optimum true sound, maximum feedback rejection and minimal handling noise
Operates up to 15 hours on a single 9V alkaline battery
Locking 3.5mm mini-jack provides secure connection for removable microphone or instrument cable
Easily accessible Input Level Adjust for optimum sound
Choice of three transmitters: WHT, WLT/WGT, or WPM-1V
WLT Bodypack Transmitters:
Choice of instrument, Headmic or lapel microphone bodypack transmitter for use with LM-14O omnidirectional or LM-14U unidirectional lapel microphone or Headmic™ Series microphones
Off/Standby/On switch allows convenient audio muting with the transmitter on
Input level adjust
Locking 3.5mm jack
LED status indicator flashes once for unit on, lights steady for low-battery alert
HM1 Headset:
Uni-directional dynamic element for top audio response — perfect for even the most exacting singing/performance applications
Adjustable gooseneck which can be set at any angle required by the user. The head worn support system is extremely light and
comfortable, and is designed to be visually unobtrusive while worn
Its ear rests and temple provide maximum stability during use, even while moving, dancing, or shaking the head. The durable cable
assembly and internal construction are designed to minimize handling noise from contact and movement
Available with Mini-XLR or 3.5mm phone plug for wired and wireless applications (fits most standard wireless bodypack transmitters)
The Encore II Wireless Headset Systems are full of top professional operating features and are hands free, thanks to the HM Series Headset. The Wireless Headset Systems are great for any type of performance or conference that requires vocals and you need your hands free.
Features:
Loaded with top professional operating features
Available on selected frequencies in the VHF high-band (171-216 MHz) for interference-free, long-range performance
Half-rack receiver design with retractable front panel antennas; single or dual receiver (side-by-side) optional rackmounting
RF and AF 5-LED displays for monitoring incoming signal strength and audio level; balanced XLR and unbalanced adjustable ¼” jack output
Unique snap-out panel locking tabs for single receiver or dual receiver (side-by-side) optional rackmounting
Noiseless transmitter On/Off switching
Features the Nady DM-20 unidirectional dynamic cartridge for optimum true sound, maximum feedback rejection and minimal handling noise
Operates up to 15 hours on a single 9V alkaline battery
Locking 3.5mm mini-jack provides secure connection for removable microphone or instrument cable
Easily accessible Input Level Adjust for optimum sound
Choice of three transmitters: WHT, WLT/WGT, or WPM-1V
WLT Bodypack Transmitters:
Choice of instrument, Headmic or lapel microphone bodypack transmitter for use with LM-14O omnidirectional or LM-14U unidirectional lapel microphone or Headmic Series microphones
Off/Standby/On switch allows convenient audio muting with the transmitter on
Input level adjust
Locking 3.5mm jack
LED status indicator flashes once for unit on, lights steady for low-battery alert
HM10 Headset:
Wide bandwidth omni-directional electret condenser mic ensures clean transparent audio and enhanced vocal pickup with improved gain before feedback
Durable thin-metal frame can be easily molded to any user
Ergonomic design and comfortable fit with or without glasses, hats, or headphones and no hairstyle hindrance
Available with Mini-XLR or 3.5mm phone plug for wired and wireless applications (fits most standard wireless bodypack transmitters). Available in black or beige color
Require low voltage phantom power as supplied by most wireless bodypack transmitters
WA-120 systems consist of a WA-120 portable wireless PA, and choice of WHT-15 handheld, or WLT-15 Lavalier or body pack transmitter with detachable microphones.
Features:
Available with choice of handheld mic or lavalier/headset mic bodypack transmitter (VHF)
Powerful 20W audio output
Three 1/4" unbalanced input jacks (2 mic, 1 aux) and one 1/4" unbalanced recording out, treble and bass control
External AC, DC(12-15V) or internal battery powered (8 x "D" alkaline or rechargeable batteries, 2 x "AA" and one 9V)
Unique convenient internal recharger for transmitter batteries - one 2 x AA and one 9V (NiCad or NiMh)
Small and lightweight - only 8.3" x 5.4" x 10.6" (211 x 137 x 270mm); weight 6.3lbs. (2.86 Kg)
Available on selected frequencies in the VHF high-band (171-216 MHz) for interference-free, long-range performance
Half-rack receiver design with retractable front panel antennas; single or dual receiver (side-by-side) optional rackmounting
RF and AF 5-LED displays for monitoring incoming signal strength and audio level; balanced XLR and unbalanced adjustable ¼” jack output
Unique snap-out panel locking tabs for single receiver or dual receiver (side-by-side) optional rackmounting
Noiseless transmitter On/Off switching
Features the Nady DM-20 unidirectional dynamic cartridge for optimum true sound, maximum feedback rejection and minimal handling noise Operates up to 15 hours on a single 9V alkaline battery
Locking 3.5mm mini-jack provides secure connection for removable microphone or instrument cable
Easily accessible Input Level Adjust for optimum sound
Choice of three transmitters: WHT, WLT/WGT, or WPM-1V
The Audio-Technica 200 Series FreeWay Wireless Microphone System offers a reliable, cost-effective alternative to hardwired microphones. The system is available in a variety of configurations and this system includes an ATW-R250 VHF receiver, ATW-T201 bodypack transmitter and PRO 8HEcW microphone.
The ATW-R250 VHF receiver is a single channel VHF receiver with dual dipole antennas for greater range and minimal RF noise. The receiver also features Power, AF and RF LED indicators on the front panel. The rear panel features a 1/4" phone output jack.
The ATW-T201 bodypack transmitter is a rugged miniature unit with a headset microphone. The ATW-201 operates on a single 9V battery and features switchable RF output for increasing range when necessary.
The FreeWay systems are ideal for public address, speech and mobile DJ use.
Reliable VHF Transmission The ATW-R250 receiver features a VHF dipole antenna system that maximizes range while minimizing interference. Bodypack Transmitter with Headset Microphone The bodypack transmitter includes the PRO 8 HEcW headset microphone for hands-free speech capturing.
Dual Output Power Switch The bodypack transmitter feature switchable output power for increased range.
System: Type of System: VHF Bodypack Headset RF Carrier Frequency Range: VHF high band, 169 MHz to 172 MHz Approx. Working Range: 200' (typical) Overall Frequency Response: 80Hz to 13kHz Signal-to-Noise Ratio: 80dB at 10kHz deviation (IEC-weighted), maximum modulation 15 kHz Of Channels: Single Channel (T3 / 170.245 MHz) Of Simultaneous Systems: Up to three
Receiver: Type of Receiver: ATW-R250 Type of Outputs: 1/4" Phone Headphone Monitoring: No Power Requirements: 100-240VAC (50/60 Hz) to 12VDC 1A (center positive) switched mode external power supply Battery Type/Approx. Life: No Display: No Mounting Options: Not Specified By Manufacturer Antenna Type: Internal Dimensions: 7.48 x 1.65 x 5.12" (190 x 42 x 130mm) Weight: 11.0 oz (311 g)
Transmitter: Type of Transmitter: VHF Bodypack Type of Input Connector: High impedance, low impedance, bias Type of Microphone: Pro 8 HEcW Headset Polar Pattern: Hyper-cardioid Interchangeable Mic Heads: No Battery Type/Approx. Life: 9V Alkaline Approximately 15 hours in High position Approximately 20 hours in Low position (depending on battery type and use pattern) Mute Switch: Not Specified by Manufacturer Level Control: Not Specified by Manufacturer Antenna Type: Internal Display: Power LED Dimensions (WxDxH): 2.56 x 1.00 x 4.33" (65.0 x 25.4 x 110mm) Weight: 2.8 oz (78 g) (without battery)
The Audio-Technica 200 Series FreeWay Wireless Microphone System offers a reliable, cost-effective alternative to hardwired microphones. The system is available in a variety of configurations and this system includes an ATW-R250 VHF receiver, ATW-T201 bodypack transmitter and PRO 8HEcW microphone.
The ATW-R250 VHF receiver is a single channel VHF receiver with dual dipole antennas for greater range and minimal RF noise. The receiver also features Power, AF and RF LED indicators on the front panel. The rear panel features a 1/4" phone output jack.
The ATW-T201 bodypack transmitter is a rugged miniature unit with a headset microphone. The ATW-201 operates on a single 9V battery and features switchable RF output for increasing range when necessary.
The FreeWay systems are ideal for public address, speech and mobile DJ use. Reliable VHF Transmission The ATW-R250 receiver features a VHF dipole antenna system that maximizes range while minimizing interference.
Bodypack Transmitter with Headset Microphone The bodypack transmitter includes the PRO 8 HEcW headset microphone for hands-free speech capturing. Dual Output Power Switch The bodypack transmitter feature switchable output power for increased range.
System: Type of System: VHF Bodypack Headset RF Carrier Frequency Range: VHF high band, 169 MHz to 172 MHz Approx. Working Range: 200' (typical) Overall Frequency Response: 80Hz to 13kHz Signal-to-Noise Ratio: 80dB at 10kHz deviation (IEC-weighted), maximum modulation 15 kHz Of Channels: Single Channel (T2 / 169.505 MHz) Of Simultaneous Systems: Up to three
Receiver: Type of Receiver: ATW-R250 Type of Outputs: 1/4" Phone Headphone Monitoring: No Power Requirements: 100-240VAC (50/60 Hz) to 12VDC 1A (center positive) switched mode external power supply Battery Type/Approx. Life: No Display: No Mounting Options: Not Specified By Manufacturer Antenna Type: Internal Dimensions: 7.48 x 1.65 x 5.12" (190 x 42 x 130mm) Weight: 11.0 oz (311 g)
Transmitter: Type of Transmitter: VHF Bodypack Type of Input Connector: High impedance, low impedance, bias Type of Microphone: Pro 8 HEcW Headset Polar Pattern: Hyper-cardioid Interchangeable Mic Heads: No Battery Type/Approx. Life: 9V Alkaline Approximately 15 hours in High position Approximately 20 hours in Low position (depending on battery type and use pattern) Mute Switch: Not Specified by Manufacturer Level Control: Not Specified by Manufacturer Antenna Type: Internal Display: Power LED Dimensions (WxDxH): 2.56 x 1.00 x 4.33" (65.0 x 25.4 x 110mm) Weight: 2.8 oz (78 g) (without battery)
ATW-R800 receiver and ATW-T801 UniPak transmitter with PRO 8HEcW headworn microphone.
Featuring sleek, stackable, contemporary styling, Audio-Technica's System 8 Wireless Systems are designed for reliable performance, easy setup and clear, natural sound quality. Available in handheld, headworn, guitar, lavalier and body-pack configurations, these single-channel, fixed-frequency systems are available in three traveling VHF frequencies (169.505, 170.245, and 171.905 MHz).
Features:
Easy operation and clear, natural sound quality
Reliable performance and durable construction
Advanced dipole antenna system for extended operating range
Power, RF, and AF Peak indicators
Volume control, 1/4" output jack and user-adjustable squelch
Rugged unidirectional dynamic element on handheld microphone/transmitter
Variable microphone trim control and multi-color battery/power indicator, AA operation on transmitters
Professional locking connector on UniPak body-pack transmitter
Available in 7 system configurations
OVERALL SYSTEM SPECIFICATIONS Operating Frequency: VHF highband, 169 MHz to 172 MHz Modulation Mode: FM Maximum Deviation: +/-10 kHz Dynamic Range: >/=90 dB (A-weighted), typical Total Harmonic Distortion: <1% (at 1 kHz, +/-10 kHz deviation) Operating Range: 200' (60 m) typical Open range environment with no interfering signals Operating Temperature Range: 40° F (4° C) to 110° F (43° C) Battery performance may be reduced at very low temperatures Frequency Response: 80 Hz to 13 kHz
RECEIVER SPECIFICATIONS Receiving System: Non-diversity, single-channel, dual antenna system Image Rejection: 50 dB minimum RF Sensitivity: 20 dBuV at 60 dB S/N ratio (50 ohms termination) Audio Output: 1/4" (6.3 mm), unbalanced: 700 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load), nominal Power Supply: 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply Dimensions: 7.48" (190.0 mm) W x 1.82" (46.2 mm) H x 5.06" (128.5 mm) D Net Weight: 11.8 oz (335 grams) Accessory Included: Power supply BODY-PACK TRANSMITTER SPECIFICATIONS RF Power Output: 10 mW Spurious Emissions: Following federal and national regulations Input Connections: Four-pin Locking Connector Pin 1: GND Pin 2: INST INPUT Pin 3: MIC INPUT Pin 4: DC BIAS +9V Batteries: Two 1.5V AA Alkaline (not included) Battery Life: 8 hours (alkaline) Depending on battery type and use pattern Dimensions: 2.76" (70.2 mm) W x 4.08" (103.7 mm) H x 0.98" (24.9 mm) D Net Weight: 3.0 oz (84.5 grams) (without battery)
HANDHELD TRANSMITTER SPECIFICATIONS RF Power Output: 10 mW Spurious Emissions: Following federal and national regulations Batteries: Two 1.5V AA Alkaline (not included) Battery Life: 8 hours (alkaline) Depending on battery type and use pattern Dimensions: 9.91" (251.8 mm) long, 2.11" (53.5 mm) diameter Net Weight: 9.2 oz (260 grams) (without battery) Accessory Included: AT8456a Quiet-Flex stand clamp
ATW-R250 receiver, ATW-T201 transmitter and PRO 8HEcW headworn microphone.
Audio-Technica’s Freeway 200 Series Wireless Systems are designed to provide reliable performance, easy setup and clear, natural sound quality. Available in handheld, headworn, guitar, lavalier and body-pack configurations, the 200 Series Freeway Wireless Systems are single-channel, fixed-frequency systems available in three VHF frequencies (169.505, 170.245, and 171.905 MHz).
Each 200 Series Freeway Wireless System includes the ATW-R250 receiver and either a body-pack transmitter or handheld microphone/ transmitter. The ATW-R250 is a non-diversity, single-channel receiver with advanced dipole antenna design for extended operating range, which improves operation by providing a ground element in addition to the usual signal element. The ATW-R250 also offers volume control along with AF Peak, RF and Power indicator lights.
Features:
Easy operation and clear, natural sound quality
Reliable performance and durable construction
Advanced dipole antenna system for extended operating range
Power, RF, and AF Peak indicators
Volume control, ¼” output jack and space-saving power supply
Rugged unidirectional dynamic element on handheld microphone/transmitter
Variable microphone trim control and easily accessible On/Standby/Off switch on transmitters
Professional locking connector on UniPak body-pack transmitter
Available in 7 system configurations
Overall System Specifications: Operating Frequency: VHF high band, 169 MHz to 172 MHz Number of Channels: Fixed channel Frequency Stability: ±0.005% Modulation Mode: FM Maximum Deviation: ±15 kHz Operating Range: 200' typical Operating Temperature Range: 40° F (4° C) to 110° F (43° C) Frequency Response: 80 Hz to 13 kHz
Receiver Specifications: Receiving System: Non-diversity, single-channel, dual antenna system Image Rejection: 50 dB minimum Signal-to-noise Ratio: 80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz Total Harmonic Distortion: <=1% (10 kHz deviation at 1 kHz) Sensitivity: 20 dBµV for 60 dB S/N (IEC-weighted) Audio Output: 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load) Output Connector: 1/4" TS ("mono") phone jack Power Supply: 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply Dimensions: 7.48" (190.0 mm) W x 1.65" (42.0 mm) H x 5.12" (130.0 mm) D Net Weight: 11.0 oz (311 g) Accessory Included: Power supply
Body-pack Transmitter Specifications: RF Power Output: 10 mW High position, 2 mW Low position, typical Spurious Emissions: Under federal regulations Dynamic Range: >=90 dB, A-weighted Input Connections: High impedance, low impedance, bias Battery: 9V (NEDA type 1604) alkaline, not included Current Consumption: 30 mA typical Battery Life: Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern) Dimensions: 2.56" (65.0 mm) W x 4.33" (110.0 mm) H x 1.00" (25.4 mm) D Net Weight: 2.8 oz (78 g) (without battery)
Handheld Transmitter Specifications: RF Power Output: 10 mW High position, 2 mW Low position, typical Spurious Emissions: Under federal regulations Dynamic Range: >=90 dB, A-weighted Microphone Element: Dynamic unidirectional Battery: 9V (NEDA type 1604) alkaline, not included Current Consumption: 30 mA typical Battery Life: Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern) Dimensions: 9.50" (241.3 mm) long, 2.10" (53.3 mm) maximum diameter Net Weight: 12.7 oz (360 g) (without battery) Accessory Included: AT8456a Quiet-Flex stand clamp
The Audio-Technica 200 Series FreeWay Wireless Microphone System offers a reliable, cost-effective alternative to hardwired microphones. The system is available in a variety of configurations and this system includes an ATW-R250 VHF receiver, ATW-T201 bodypack transmitter and PRO 8HEcW microphone.
The ATW-R250 VHF receiver is a single channel VHF receiver with dual dipole antennas for greater range and minimal RF noise. The receiver also features Power, AF and RF LED indicators on the front panel. The rear panel features a 1/4" phone output jack.
The ATW-T201 bodypack transmitter is a rugged miniature unit with a headset microphone. The ATW-201 operates on a single 9V battery and features switchable RF output for increasing range when necessary.
The FreeWay systems are ideal for public address, speech and mobile DJ use. Reliable VHF Transmission The ATW-R250 receiver features a VHF dipole antenna system that maximizes range while minimizing interference.
Bodypack Transmitter with Headset Microphone The bodypack transmitter includes the PRO 8 HEcW headset microphone for hands-free speech capturing. Dual Output Power Switch The bodypack transmitter feature switchable output power for increased range.
System: Type of System: VHF Bodypack Headset RF Carrier Frequency Range: VHF high band, 169 MHz to 172 MHz Approx. Working Range: 200' (typical) Overall Frequency Response: 80Hz to 13kHz Signal-to-Noise Ratio: 80dB at 10kHz deviation (IEC-weighted), maximum modulation 15 kHz Of Channels: Single Channel (T8 / 171.905 MHz) Of Simultaneous Systems: Up to three
Receiver: Type of Receiver: ATW-R250 Type of Outputs: 1/4" Phone Headphone Monitoring: No Power Requirements: 100-240VAC (50/60 Hz) to 12VDC 1A (center positive) switched mode external power supply Battery Type/Approx. Life: No Display: No Mounting Options: Not Specified By Manufacturer Antenna Type: Internal Dimensions: 7.48 x 1.65 x 5.12" (190 x 42 x 130mm) Weight: 11.0 oz (311 g) Transmitter: Type of Transmitter: VHF Bodypack Type of Input Connector: High impedance, low impedance, bias Type of Microphone: Pro 8 HEcW Headset Polar Pattern: Hyper-cardioid Interchangeable Mic Heads: No Battery Type/Approx. Life: 9V Alkaline Approximately 15 hours in High position Approximately 20 hours in Low position (depending on battery type and use pattern) Mute Switch: Not Specified by Manufacturer Level Control: Not Specified by Manufacturer Antenna Type: Internal Display: Power LED Dimensions (WxDxH): 2.56 x 1.00 x 4.33" (65.0 x 25.4 x 110mm) Weight: 2.8 oz (78 g) (without battery)
Gemini loves freedom. Gemini’s UHF-4100HL Wireless Headset/Lavalier System provides clear, accurate vocal reproduction without the burden of cables, ensuring wired limitations never force you to sacrifice passion or energy during a performance. Ideal for DJs, presenters, fitness instructors, singers, MCs and anyone seeking a high-quality wireless headset or lavalier solution, the UHF-4100HL offers superior reliability and ultra-clear reception at a completely affordable price.
Roadworthy. Crystal clear.Frequency-agile. Built to withstand the rigors of consistent use at events, meetings, auditoriums, fitness studios and houses of worship, the UHF-4100HL features a robust 100-channel UHF receiver with a range of 250 feet. Using Phase Locked Loop (PLL) circuitry to prevent phasing issues that plague other wireless systems, the receiver’s front panel provides a Power button and rotary Volume control, along with Group and Channel adjustments for setting the desired frequency. RF and AF LED indicators also let you monitor incoming signal strength, while balanced XLR and unbalanced ¼-inch outputs offer true connecting convenience. The unit even gives you the option to set your frequency manually or allow the receiver to automatically find an optimal frequency.
Two wireless solutions in one package. For outstanding versatility, the UHF-4100HL includes a comfortable and convertible lightweight headset with a detachable lavalier microphone. So, whether you’re leading a fitness class or giving a presentation, this system has you covered. And to ensure exceptional audio quality, the UHF-4100HL’s professional-grade microphone employs a condenser element with a cardioid polar pattern and includes foam inserts to reduce wind noise and popping. The discreet belt pack transmitter also provides a convenient Power/Mute button and runs on two AA batteries with up to eight hours of battery life.
Ditch the cables. Why restrict your performance with wires when the UHF-4100HL gives you total freedom of mobility? Ditch the cables and let your natural energy electrify the crowd with this high-quality wireless solution.
Single UHF receiver with 250' range
US: 100 operating frequencies between 682MHz and 698MHz
EUR: 100 operating frequencies between 854MHz and 865MHz
Allows up to 8 mics to be used simultaneously without interference
Switchable automatic/manual frequency selection
Phase Locked Loop (PLL) circuitry for increased reception
RF and AF LED indicators for monitoring incoming signal strength
Auto mute with built-in noise reduction
Front panel output level control
Balanced XLR and unbalanced 1/4" outputs
Microphone On/Off switch
Convertible, comfortable lightweight headset/lavalier mic with sensitivity and pop control
Discreet, lightweight belt pack transmitter
RECEIVER Frequency range: USA: 682-698MHz Europe: 854-865Mhz Receiving system: PLL synthesized Frequency Stability: +/- 0.005% Frequency Response: 50Hz-15kHz +/- 3dB Signal-to-Noise Ration: 90dB Modulation Mode: FM IF Frequency: 80.5 MHz T.H.D.: 1% (@ 1kHz) Sensitivity: 10dBuV (FM: 40kHz, S/N>85dB) Power Supply: 12V DC Audio Output: Balanced XLR Unbalanced 1/4" Dimensions 210 x 138 x 45 mm
TRANSMITTER RF Power Output: <10dBm Oscillation Mode: PLL Synthesized Spurious Emission: > 50dB below carrier freq. Frequency Stability: 30.005% with quartz control Max Modulation: +/-60kHz Current Consumption: 100mA Battery Type: Two (2) AA Alkaline Battery Life: 8 hours Microphone Element: Condenser Mic Polar Pattern: Cardioid Dimensions: 63x20x110mm
Nady WA-120/HM-1 WA-120 systems consist of a WA-120 portable wireless PA, and choice of WHT-15 handheld, or WLT-15 Lavalier or body pack transmitter with detachable microphones. Product Overview: Portable P.A. w/ built-in VHF wireless microphone receiver The new WA-120 is the most afforable and compact of Nady ' s growing, popular line of wireless PA ' s. Ideal for many applications -- classrooms, conference/meeting rooms, churches, health clubs, and small auditoriums -- the WA-120 is powerful, lightweight and easily portable.
Features: Available with choice of handheld mic or lavalier/headset mic bodypack transmitter (VHF) Powerful 20W audio output Three 1/4 " unbalanced input jacks (2 mic, 1 aux) and one 1/4 " unbalanced recording out, treble and bass control External AC, DC(12-15V) or internal battery powered (8 x " D " alkaline or rechargeable batteries, 2 x " AA " and one 9V) Unique convenient internal recharger for transmitter batteries - one 2 x AA and one 9V (NiCad or NiMh) Small and lightweight - only 8.3 " x 5.4 " x 10.6 " (211 x 137 x 270mm); weight 6.3lbs. (2.86 Kg).
Professional combo dual channel VHF with handheld cardoid and headset omni microphone wireless system with DigiTRU Diversity
Features:
Loaded with top professional operating features
Available on selected frequencies in the VHF high-band (171-216 MHz) for interference-free, long-range performance
Half-rack receiver design with retractable front panel antennas
Unique snap-out panel locking tabs for optional single receiver rackmounting or dual receiver (side-by-side) rackmounting
RF and AF 5-LED displays for monitoring incoming signal strength and audio level; balanced XLR and unbalanced adjustable ¼" jack output
Noiseless transmitter On/Off switching
Operates up to 15 hours on a single 9V alkaline battery
Locking 3.5mm mini-jack provides secure connection for removable microphone or instrument cable
Easily accessible Input Level Adjust for optimal sound
Choice of three transmitters: WHT, WLT/WGT, or WPM-1V
WHT Handheld Microphone Transmitter:
Operates on a separate single frequency in the VHF 170-216MHz band
Features the Nady DM-10D unidirectional neodymium dynamic cartridge for optimum true sound, maximum feedback rejection and minimal handling noise
Off/Standby/On switch allows convenient audio muting with transmitter on
Low-battery LED indicator flashes once for Unit On; lights steady for low-battery alert
Uses one 9V alkaline battery for 15+ hours operation
WLT/WGT Bodypack Transmitters:
Choice of instrument, Headmic or lapel microphone bodypack transmitter for use with LM-14O omnidirectional or LM-14U unidirectional lapel microphone or Headmic Series microphones
Off/Standby/On switch allows convenient audio muting with the transmitter on
Input level adjust
Locking 3.5mm jack
LED status indicator flashes once for unit on, lights steady for low-battery alert
The Encore Duet Wireless Headset Systems are full of top professional operating features and are hands free, thanks to the HM Series Headset. The Wireless Headset Systems are great for any type of performance or conference that requires vocals and you need your hands free.
Features:
Loaded with top professional operating features
Available on selected frequencies in the VHF high-band (171-216 MHz) for interference-free, long-range performance
Half-rack receiver design with retractable front panel antennas; single or dual receiver (side-by-side) optional rackmounting
RF and AF 5-LED displays for monitoring incoming signal strength and audio level; balanced XLR and unbalanced adjustable ¼” jack output
Unique snap-out panel locking tabs for single receiver or dual receiver (side-by-side) optional rackmounting
Noiseless transmitter On/Off switching
Features the Nady DM-20 unidirectional dynamic cartridge for optimum true sound, maximum feedback rejection and minimal handling noise
Operates up to 15 hours on a single 9V alkaline battery
Locking 3.5mm mini-jack provides secure connection for removable microphone or instrument cable
Easily accessible Input Level Adjust for optimum sound
Choice of three transmitters: WHT, WLT/WGT, or WPM-1V
WLT Bodypack Transmitters:
Choice of instrument, Headmic or lapel microphone bodypack transmitter for use with LM-14O omnidirectional or LM-14U unidirectional lapel microphone or Headmic Series microphones
Off/Standby/On switch allows convenient audio muting with the transmitter on
Input level adjust
Locking 3.5mm jack
LED status indicator flashes once for unit on, lights steady for low-battery alert
HM3 Headset:
Uni-directional dynamic element for top audio response — perfect for even the most exacting singing/performance applications
Adjustable gooseneck which can be set at any angle required by the user. The head worn support system is extremely light and comfortable, and is designed to be visually unobtrusive while worn
Its ear rests and temple provide maximum stability during use, even while moving, dancing, or shaking the head. The durable cable assembly and internal construction are designed to minimize handling noise from contact and movement
Available with Mini-XLR or 3.5mm phone plug for wired and wireless applications (fits most standard wireless bodypack transmitters)
ATW-R800 receiver and ATW-T801 UniPak transmitter with PRO 92cW-TH headworn microphone (beige).
Featuring sleek, stackable, contemporary styling, Audio-Technica's System 8 Wireless Systems are designed for reliable performance, easy setup and clear, natural sound quality. Available in handheld, headworn, guitar, lavalier and body-pack configurations, these single-channel, fixed-frequency systems are available in three traveling VHF frequencies (169.505, 170.245, and 171.905 MHz).
Features:
Easy operation and clear, natural sound quality
Reliable performance and durable construction
Advanced dipole antenna system for extended operating range
Power, RF, and AF Peak indicators
Volume control, 1/4" output jack and user-adjustable squelch
Rugged unidirectional dynamic element on handheld microphone/transmitter
Variable microphone trim control and multi-color battery/power indicator, AA operation on transmitters
Professional locking connector on UniPak body-pack transmitter
Available in 7 system configurations
OVERALL SYSTEM SPECIFICATIONS Operating Frequency: VHF highband, 169 MHz to 172 MHz Modulation Mode: FM Maximum Deviation: +/-10 kHz Dynamic Range: >/=90 dB (A-weighted), typical Total Harmonic Distortion: <1% (at 1 kHz, +/-10 kHz deviation) Operating Range: 200' (60 m) typical Open range environment with no interfering signals Operating Temperature Range: 40° F (4° C) to 110° F (43° C) Battery performance may be reduced at very low temperatures Frequency Response: 80 Hz to 13 kHz RECEIVER SPECIFICATIONS Receiving System: Non-diversity, single-channel, dual antenna system Image Rejection: 50 dB minimum RF Sensitivity: 20 dBuV at 60 dB S/N ratio (50 ohms termination) Audio Output: 1/4" (6.3 mm), unbalanced: 700 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load), nominal Power Supply: 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply Dimensions: 7.48" (190.0 mm) W x 1.82" (46.2 mm) H x 5.06" (128.5 mm) D Net Weight: 11.8 oz (335 grams) Accessory Included: Power supply
BODY-PACK TRANSMITTER SPECIFICATIONS RF Power Output: 10 mW Spurious Emissions: Following federal and national regulations Input Connections: Four-pin Locking Connector Pin 1: GND Pin 2: INST INPUT Pin 3: MIC INPUT Pin 4: DC BIAS +9V Batteries: Two 1.5V AA Alkaline (not included) Battery Life: 8 hours (alkaline) Depending on battery type and use pattern Dimensions: 2.76" (70.2 mm) W x 4.08" (103.7 mm) H x 0.98" (24.9 mm) D Net Weight: 3.0 oz (84.5 grams) (without battery) HANDHELD TRANSMITTER SPECIFICATIONS RF Power Output: 10 mW Spurious Emissions: Following federal and national regulations Batteries: Two 1.5V AA Alkaline (not included) Battery Life: 8 hours (alkaline) Depending on battery type and use pattern Dimensions: 9.91" (251.8 mm) long, 2.11" (53.5 mm) diameter Net Weight: 9.2 oz (260 grams) (without battery) Accessory Included: AT8456a Quiet-Flex stand clamp
The Audio-Technica 200 Series FreeWay Wireless Microphone System offers a reliable, cost-effective alternative to hardwired microphones. This system includes the 92CW single-ear headworn microphone for completely hands-free operation. The system is available in a variety of configurations and this system includes an ATW-R250 VHF receiver and ATW-T201 bodypack transmitter.
The ATW-R250 VHF receiver is a single channel VHF receiver with dual dipole antennas for greater range and minimal RF noise. The receiver also features Power, AF and RF LED indicators on the front panel. The rear panel features a 1/4" phone output jack.
The ATW-T201 bodypack transmitter is a rugged miniature unit. The ATW-201 operates on a single 9V battery and features switchable RF output for increasing range when necessary.
The FreeWay systems are ideal for public address, speech and mobile DJ use.
Pro-92CW Omnidirectional Headworn Microphone The Pro-92CW headworn microphone is an ideal solution for presenters, DJs, performers and musicians who prefer hands-free wireless microphone operation.
Bodypack Transmitter The bodypack transmitter is lightweight and portable. Compatible Audio-Technica lavalier and head-worn microphones are available for use with the transmitter. Reliable VHF Transmission The ATW-R250 receiver features a VHF dipole antenna system that maximizes range while minimizing interference. Dual Output Power Switch The bodypack transmitter feature switchable output power for increased range.
System: Type of System: VHF Bodypack RF Carrier Frequency Range: VHF high band, 169 MHz to 172 MHz Approx. Working Range: 200' (typical) Overall Frequency Response: 80Hz to 13kHz Signal-to-Noise Ratio: 80dB at 10kHz deviation (IEC-weighted), maximum modulation 15 kHz Of Channels: Single Channel (T3 / 170.245 MHz) Of Simultaneous Systems: Up to three
Receiver: Type of Receiver: ATW-R250 Type of Outputs: 1/4" Phone Headphone Monitoring: No Power Requirements: 100-240VAC (50/60 Hz) to 12VDC 1A (center positive) switched mode external power supply Battery Type/Approx. Life: No Display: No Mounting Options: Not Specified By Manufacturer Antenna Type: Internal Dimensions: 7.48 x 1.65 x 5.12" (190 x 42 x 130mm) Weight: 11.0 oz (311 g)
Transmitter: Type of Transmitter: VHF Bodypack Type of Input Connector: High impedance, low impedance, bias Type of Microphone: Pro-92CW Headworn Microphone Polar Pattern: No Applicable Interchangeable Mic Heads: No Battery Type/Approx. Life: 9V Alkaline Approximately 15 hours in High position Approximately 20 hours in Low position (depending on battery type and use pattern) Mute Switch: Not Specified by Manufacturer Level Control: Not Specified by Manufacturer Antenna Type: Internal Display: Power LED Dimensions (WxDxH): 2.56 x 1.00 x 4.33" (65.0 x 25.4 x 110mm) Weight: 2.8 oz (78 g) (without battery)
ATW-R800 receiver and ATW-T801 UniPak transmitter with PRO 92cW headworn microphone.
Featuring sleek, stackable, contemporary styling, Audio-Technica's System 8 Wireless Systems are designed for reliable performance, easy setup and clear, natural sound quality. Available in handheld, headworn, guitar, lavalier and body-pack configurations, these single-channel, fixed-frequency systems are available in three traveling VHF frequencies (169.505, 170.245, and 171.905 MHz).
Features:
Easy operation and clear, natural sound quality
Reliable performance and durable construction
Advanced dipole antenna system for extended operating range
Power, RF, and AF Peak indicators
Volume control, 1/4" output jack and user-adjustable squelch
Rugged unidirectional dynamic element on handheld microphone/transmitter
Variable microphone trim control and multi-color battery/power indicator, AA operation on transmitters
Professional locking connector on UniPak body-pack transmitter
Available in 7 system configurations
OVERALL SYSTEM SPECIFICATIONS Operating Frequency: VHF highband, 169 MHz to 172 MHz Modulation Mode: FM Maximum Deviation: +/-10 kHz Dynamic Range: >/=90 dB (A-weighted), typical Total Harmonic Distortion: <1% (at 1 kHz, +/-10 kHz deviation) Operating Range: 200' (60 m) typical Open range environment with no interfering signals Operating Temperature Range: 40° F (4° C) to 110° F (43° C) Battery performance may be reduced at very low temperatures Frequency Response: 80 Hz to 13 kHz
RECEIVER SPECIFICATIONS Receiving System: Non-diversity, single-channel, dual antenna system Image Rejection: 50 dB minimum RF Sensitivity: 20 dBuV at 60 dB S/N ratio (50 ohms termination) Audio Output: 1/4" (6.3 mm), unbalanced: 700 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load), nominal Power Supply: 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply Dimensions: 7.48" (190.0 mm) W x 1.82" (46.2 mm) H x 5.06" (128.5 mm) D Net Weight: 11.8 oz (335 grams) Accessory Included: Power supply
BODY-PACK TRANSMITTER SPECIFICATIONS RF Power Output: 10 mW Spurious Emissions: Following federal and national regulations Input Connections: Four-pin Locking Connector Pin 1: GND Pin 2: INST INPUT Pin 3: MIC INPUT Pin 4: DC BIAS +9V Batteries: Two 1.5V AA Alkaline (not included) Battery Life: 8 hours (alkaline) Depending on battery type and use pattern Dimensions: 2.76" (70.2 mm) W x 4.08" (103.7 mm) H x 0.98" (24.9 mm) D Net Weight: 3.0 oz (84.5 grams) (without battery) HANDHELD TRANSMITTER SPECIFICATIONS RF Power Output: 10 mW Spurious Emissions: Following federal and national regulations Batteries: Two 1.5V AA Alkaline (not included) Battery Life: 8 hours (alkaline) Depending on battery type and use pattern Dimensions: 9.91" (251.8 mm) long, 2.11" (53.5 mm) diameter Net Weight: 9.2 oz (260 grams) (without battery) Accessory Included: AT8456a Quiet-Flex stand clamp
The Audio-Technica 200 Series FreeWay Wireless Microphone System offers a reliable, cost-effective alternative to hardwired microphones. This system includes the 92CW single-ear headworn microphone for completely hands-free operation. The system is available in a variety of configurations and this system includes an ATW-R250 VHF receiver and ATW-T201 bodypack transmitter.
The ATW-R250 VHF receiver is a single channel VHF receiver with dual dipole antennas for greater range and minimal RF noise. The receiver also features Power, AF and RF LED indicators on the front panel. The rear panel features a 1/4" phone output jack.
The ATW-T201 bodypack transmitter is a rugged miniature unit. The ATW-201 operates on a single 9V battery and features switchable RF output for increasing range when necessary.
The FreeWay systems are ideal for public address, speech and mobile DJ use.
Pro-92CW Omnidirectional Headworn Microphone The Pro-92CW headworn microphone is an ideal solution for presenters, DJs, performers and musicians who prefer hands-free wireless microphone operation. Bodypack Transmitter The bodypack transmitter is lightweight and portable. Compatible Audio-Technica lavalier and head-worn microphones are available for use with the transmitter.
Reliable VHF Transmission The ATW-R250 receiver features a VHF dipole antenna system that maximizes range while minimizing interference.
Dual Output Power Switch The bodypack transmitter feature switchable output power for increased range.
System: Type of System: VHF Bodypack RF Carrier Frequency Range: VHF high band, 169 MHz to 172 MHz Approx. Working Range: 200' (typical) Overall Frequency Response: 80Hz to 13kHz Signal-to-Noise Ratio: 80dB at 10kHz deviation (IEC-weighted), maximum modulation 15 kHz Of Channels: Single Channel (T8 / 178.905 MHz) Of Simultaneous Systems: Up to three
Receiver: Type of Receiver: ATW-R250 Type of Outputs: 1/4" Phone Headphone Monitoring: No Power Requirements: 100-240VAC (50/60 Hz) to 12VDC 1A (center positive) switched mode external power supply Battery Type/Approx. Life: No Display: No Mounting Options: Not Specified By Manufacturer Antenna Type: Internal Dimensions: 7.48 x 1.65 x 5.12" (190 x 42 x 130mm) Weight: 11.0 oz (311 g) Transmitter: Type of Transmitter: VHF Bodypack Type of Input Connector: High impedance, low impedance, bias Type of Microphone: Pro-92CW Headworn Microphone Polar Pattern: No Applicable Interchangeable Mic Heads: No Battery Type/Approx. Life: 9V Alkaline Approximately 15 hours in High position Approximately 20 hours in Low position (depending on battery type and use pattern) Mute Switch: Not Specified by Manufacturer Level Control: Not Specified by Manufacturer Antenna Type: Internal Display: Power LED Dimensions (WxDxH): 2.56 x 1.00 x 4.33" (65.0 x 25.4 x 110mm) Weight: 2.8 oz (78 g) (without battery)
panel. The rear panel features a 1/4" phone output jack.
The ATW-T201 bodypack transmitter is a rugged miniature unit. The ATW-201 operates on a single 9V battery and features switchable RF output for increasing range when necessary.
The FreeWay systems are ideal for public address, speech and mobile DJ use. Pro-92CW Omnidirectional Headworn Microphone The Pro-92CW headworn microphone is an ideal solution for presenters, DJs, performers and musicians who prefer hands-free wireless microphone operation. Bodypack Transmitter The bodypack transmitter is lightweight and portable. Compatible Audio-Technica lavalier and head-worn microphones are available for use with the transmitter.
Reliable VHF Transmission The ATW-R250 receiver features a VHF dipole antenna system that maximizes range while minimizing interference.
Dual Output Power Switch The bodypack transmitter feature switchable output power for increased range.
System: Type of System: VHF Bodypack RF Carrier Frequency Range: VHF high band, 169 MHz to 172 MHz Approx. Working Range: 200' (typical) Overall Frequency Response: 80Hz to 13kHz Signal-to-Noise Ratio: 80dB at 10kHz deviation (IEC-weighted), maximum modulation 15 kHz Of Channels: Single Channel (T3 / 170.245 MHz) Of Simultaneous Systems: Up to three
Receiver: Type of Receiver: ATW-R250 Type of Outputs: 1/4" Phone Headphone Monitoring: No Power Requirements: 100-240VAC (50/60 Hz) to 12VDC 1A (center positive) switched mode external power supply Battery Type/Approx. Life: No Display: No Mounting Options: Not Specified By Manufacturer Antenna Type: Internal Dimensions: 7.48 x 1.65 x 5.12" (190 x 42 x 130mm) Weight: 11.0 oz (311 g)
Transmitter: Type of Transmitter: VHF Bodypack Type of Input Connector: High impedance, low impedance, bias Type of Microphone: Pro-92CW Headworn Microphone Polar Pattern: No Applicable Interchangeable Mic Heads: No Battery Type/Approx. Life: 9V Alkaline Approximately 15 hours in High position Approximately 20 hours in Low position (depending on battery type and use pattern) Mute Switch: Not Specified by Manufacturer Level Control: Not Specified by Manufacturer Antenna Type: Internal Display: Power LED Dimensions (WxDxH): 2.56 x 1.00 x 4.33" (65.0 x 25.4 x 110mm) Weight: 2.8 oz (78 g) (without battery)
The Audio-Technica 200 Series FreeWay Wireless Microphone System offers a reliable, cost-effective alternative to hardwired microphones. This system includes the 92CW single-ear headworn microphone for completely hands-free operation. The system is available in a variety of configurations and this system includes an ATW-R250 VHF receiver and ATW-T201 bodypack transmitter.
The ATW-R250 VHF receiver is a single channel VHF receiver with dual dipole antennas for greater range and minimal RF noise. The receiver also features Power, AF and RF LED indicators on the front panel. The rear panel features a 1/4" phone output jack.
The ATW-T201 bodypack transmitter is a rugged miniature unit. The ATW-201 operates on a single 9V battery and features switchable RF output for increasing range when necessary.
The FreeWay systems are ideal for public address, speech and mobile DJ use.
Pro-92CW Omnidirectional Headworn Microphone The Pro-92CW headworn microphone is an ideal solution for presenters, DJs, performers and musicians who prefer hands-free wireless microphone operation.
Bodypack Transmitter The bodypack transmitter is lightweight and portable. Compatible Audio-Technica lavalier and head-worn microphones are available for use with the transmitter.
Reliable VHF Transmission The ATW-R250 receiver features a VHF dipole antenna system that maximizes range while minimizing interference. Dual Output Power Switch The bodypack transmitter feature switchable output power for increased range.
System: Type of System: VHF Bodypack RF Carrier Frequency Range: VHF high band, 169 MHz to 172 MHz Approx. Working Range: 200' (typical) Overall Frequency Response: 80Hz to 13kHz Signal-to-Noise Ratio: 80dB at 10kHz deviation (IEC-weighted), maximum modulation 15 kHz Of Channels: Single Channel (T2 / 169.505 MHz) Of Simultaneous Systems: Up to three
Receiver: Type of Receiver: ATW-R250 Type of Outputs: 1/4" Phone Headphone Monitoring: No Power Requirements: 100-240VAC (50/60 Hz) to 12VDC 1A (center positive) switched mode external power supply Battery Type/Approx. Life: No Display: No Mounting Options: Not Specified By Manufacturer Antenna Type: Internal Dimensions: 7.48 x 1.65 x 5.12" (190 x 42 x 130mm) Weight: 11.0 oz (311 g)
Transmitter: Type of Transmitter: VHF Bodypack Type of Input Connector: High impedance, low impedance, bias Type of Microphone: Pro-92CW Headworn Microphone Polar Pattern: No Applicable Interchangeable Mic Heads: No Battery Type/Approx. Life: 9V Alkaline Approximately 15 hours in High position Approximately 20 hours in Low position (depending on battery type and use pattern) Mute Switch: Not Specified by Manufacturer Level Control: Not Specified by Manufacturer Antenna Type: Internal Display: Power LED Dimensions (WxDxH): 2.56 x 1.00 x 4.33" (65.0 x 25.4 x 110mm) Weight: 2.8 oz (78 g) (without battery)
The Audio-Technica 200 Series FreeWay Wireless Microphone System offers a reliable, cost-effective alternative to hardwired microphones. This system includes the 92CW single-ear headworn microphone for completely hands-free operation. The system is available in a variety of configurations and this system includes an ATW-R250 VHF receiver and ATW-T201 bodypack transmitter.
The ATW-R250 VHF receiver is a single channel VHF receiver with dual dipole antennas for greater range and minimal RF noise. The receiver also features Power, AF and RF LED indicators on the front panel. The rear panel features a 1/4" phone output jack.
The ATW-T201 bodypack transmitter is a rugged miniature unit. The ATW-201 operates on a single 9V battery and features switchable RF output for increasing range when necessary.
The FreeWay systems are ideal for public address, speech and mobile DJ use.
Pro-92CW Omnidirectional Headworn Microphone The Pro-92CW headworn microphone is an ideal solution for presenters, DJs, performers and musicians who prefer hands-free wireless microphone operation.
Bodypack Transmitter The bodypack transmitter is lightweight and portable. Compatible Audio-Technica lavalier and head-worn microphones are available for use with the transmitter. Reliable VHF Transmission The ATW-R250 receiver features a VHF dipole antenna system that maximizes range while minimizing interference. Dual Output Power Switch The bodypack transmitter feature switchable output power for increased range.
System: Type of System: VHF Bodypack RF Carrier Frequency Range: VHF high band, 169 MHz to 172 MHz Approx. Working Range: 200' (typical) Overall Frequency Response: 80Hz to 13kHz Signal-to-Noise Ratio: 80dB at 10kHz deviation (IEC-weighted), maximum modulation 15 kHz Of Channels: Single Channel (T8 / 178.905 MHz) Of Simultaneous Systems: Up to three
Receiver: Type of Receiver: ATW-R250 Type of Outputs: 1/4" Phone Headphone Monitoring: No Power Requirements: 100-240VAC (50/60 Hz) to 12VDC 1A (center positive) switched mode external power supply Battery Type/Approx. Life: No Display: No Mounting Options: Not Specified By Manufacturer Antenna Type: Internal Dimensions: 7.48 x 1.65 x 5.12" (190 x 42 x 130mm) Weight: 11.0 oz (311 g)
Transmitter: Type of Transmitter: VHF Bodypack Type of Input Connector: High impedance, low impedance, bias Type of Microphone: Pro-92CW Headworn Microphone Polar Pattern: No Applicable Interchangeable Mic Heads: No Battery Type/Approx. Life: 9V Alkaline Approximately 15 hours in High position Approximately 20 hours in Low position (depending on battery type and use pattern) Mute Switch: Not Specified by Manufacturer Level Control: Not Specified by Manufacturer Antenna Type: Internal Display: Power LED Dimensions (WxDxH): 2.56 x 1.00 x 4.33" (65.0 x 25.4 x 110mm) Weight: 2.8 oz (78 g) (without battery)
ATW-R250 receiver, ATW-T201 transmitter and PRO 92cW omnidirectional condenser headworn microphone (black).
Audio-Technica’s Freeway 200 Series Wireless Systems are designed to provide reliable performance, easy setup and clear, natural sound quality. Available in handheld, headworn, guitar, lavalier and body-pack configurations, the 200 Series Freeway Wireless Systems are single-channel, fixed-frequency systems available in three VHF frequencies (169.505, 170.245, and 171.905 MHz).
Each 200 Series Freeway Wireless System includes the ATW-R250 receiver and either a body-pack transmitter or handheld microphone/ transmitter. The ATW-R250 is a non-diversity, single-channel receiver with advanced dipole antenna design for extended operating range, which improves operation by providing a ground element in addition to the usual signal element. The ATW-R250 also offers volume control along with AF Peak, RF and Power indicator lights.
Features:
Easy operation and clear, natural sound quality
Reliable performance and durable construction
Advanced dipole antenna system for extended operating range
Power, RF, and AF Peak indicators
Volume control, ¼” output jack and space-saving power supply
Rugged unidirectional dynamic element on handheld microphone/transmitter
Variable microphone trim control and easily accessible On/Standby/Off switch on transmitters
Professional locking connector on UniPak body-pack transmitter
Available in 7 system configurations
Overall System Specifications: Operating Frequency: VHF high band, 169 MHz to 172 MHz Number of Channels: Fixed channel Frequency Stability: ±0.005% Modulation Mode: FM Maximum Deviation: ±15 kHz Operating Range: 200' typical Operating Temperature Range: 40° F (4° C) to 110° F (43° C) Frequency Response: 80 Hz to 13 kHz
Receiver Specifications: Receiving System: Non-diversity, single-channel, dual antenna system Image Rejection: 50 dB minimum Signal-to-noise Ratio: 80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz Total Harmonic Distortion: <=1% (10 kHz deviation at 1 kHz) Sensitivity: 20 dBµV for 60 dB S/N (IEC-weighted) Audio Output: 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load) Output Connector: 1/4" TS ("mono") phone jack Power Supply: 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply Dimensions: 7.48" (190.0 mm) W x 1.65" (42.0 mm) H x 5.12" (130.0 mm) D Net Weight: 11.0 oz (311 g) Accessory Included: Power supply
Body-pack Transmitter Specifications: RF Power Output: 10 mW High position, 2 mW Low position, typical Spurious Emissions: Under federal regulations Dynamic Range: >=90 dB, A-weighted Input Connections: High impedance, low impedance, bias Battery: 9V (NEDA type 1604) alkaline, not included Current Consumption: 30 mA typical Battery Life: Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern) Dimensions: 2.56" (65.0 mm) W x 4.33" (110.0 mm) H x 1.00" (25.4 mm) D Net Weight: 2.8 oz (78 g) (without battery)
Handheld Transmitter Specifications: RF Power Output: 10 mW High position, 2 mW Low position, typical Spurious Emissions: Under federal regulations Dynamic Range: >=90 dB, A-weighted Microphone Element: Dynamic unidirectional Battery: 9V (NEDA type 1604) alkaline, not included Current Consumption: 30 mA typical Battery Life: Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern) Dimensions: 9.50" (241.3 mm) long, 2.10" (53.3 mm) maximum diameter Net Weight: 12.7 oz (360 g) (without battery) Accessory Included: AT8456a Quiet-Flex stand clamp
The Audio-Technica 200 Series FreeWay Wireless Microphone System offers a reliable, cost-effective alternative to hardwired microphones. This system includes the 92CW single-ear headworn microphone for completely hands-free operation. The system is available in a variety of configurations and this system includes an ATW-R250 VHF receiver and ATW-T201 bodypack transmitter.
The ATW-R250 VHF receiver is a single channel VHF receiver with dual dipole antennas for greater range and minimal RF noise. The receiver also features Power, AF and RF LED indicators on the front panel. The rear panel features a 1/4" phone output jack.
The ATW-T201 bodypack transmitter is a rugged miniature unit. The ATW-201 operates on a single 9V battery and features switchable RF output for increasing range when necessary.
The FreeWay systems are ideal for public address, speech and mobile DJ use.
Pro-92CW Omnidirectional Headworn Microphone The Pro-92CW headworn microphone is an ideal solution for presenters, DJs, performers and musicians who prefer hands-free wireless microphone operation.
Bodypack Transmitter The bodypack transmitter is lightweight and portable. Compatible Audio-Technica lavalier and head-worn microphones are available for use with the transmitter.
Reliable VHF Transmission The ATW-R250 receiver features a VHF dipole antenna system that maximizes range while minimizing interference. Dual Output Power Switch The bodypack transmitter feature switchable output power for increased range.
System: Type of System: VHF Bodypack RF Carrier Frequency Range: VHF high band, 169 MHz to 172 MHz Approx. Working Range: 200' (typical) Overall Frequency Response: 80Hz to 13kHz Signal-to-Noise Ratio: 80dB at 10kHz deviation (IEC-weighted), maximum modulation 15 kHz Of Channels: Single Channel (T2 / 169.505 MHz) Of Simultaneous Systems: Up to three Receiver: Type of Receiver: ATW-R250 Type of Outputs: 1/4" Phone Headphone Monitoring: No Power Requirements: 100-240VAC (50/60 Hz) to 12VDC 1A (center positive) switched mode external power supply Battery Type/Approx. Life: No Display: No Mounting Options: Not Specified By Manufacturer Antenna Type: Internal Dimensions: 7.48 x 1.65 x 5.12" (190 x 42 x 130mm) Weight: 11.0 oz (311 g)
Transmitter: Type of Transmitter: VHF Bodypack Type of Input Connector: High impedance, low impedance, bias Type of Microphone: Pro-92CW Headworn Microphone Polar Pattern: No Applicable Interchangeable Mic Heads: No Battery Type/Approx. Life: 9V Alkaline Approximately 15 hours in High position Approximately 20 hours in Low position (depending on battery type and use pattern) Mute Switch: Not Specified by Manufacturer Level Control: Not Specified by Manufacturer Antenna Type: Internal Display: Power LED Dimensions (WxDxH): 2.56 x 1.00 x 4.33" (65.0 x 25.4 x 110mm) Weight: 2.8 oz (78 g) (without battery)
Gemini loves freedom. Gemini’s UHF-4200HL Dual Wireless Headset/Lavalier System provides clear, accurate vocal reproduction without the burden of cables, ensuring wired limitations never force you to sacrifice passion or energy during a performance. Ideal for DJs, presenters, fitness instructors, singers, MCs and anyone seeking a high-quality wireless headset or lavalier solution, the UHF-4200HL offers superior reliability and ultra-clear reception at a completely affordable price.
Roadworthy. Crystal clear. Frequency-agile. Built to withstand the rigors of consistent use at events, meetings, auditoriums, fitness studios and houses of worship, the UHF-4200HL features robust dual 100-channel UHF receivers with a range of 250 feet. Using Phase Locked Loop (PLL) circuitry to prevent phasing issues that plague other wireless systems, both receivers are housed in a single discreet enclosure with a front panel Power button. Each receiver has individual rotary Volume control, along with Group and Channel adjustments for setting the desired frequency. RF and AF LED indicators also let you monitor incoming signal strength, while balanced XLR and unbalanced ¼-inch outputs offer true connecting convenience. The unit even gives you the option to set your frequency manually or allow the receiver to automatically find an optimal frequency.
Two wireless solutions in one package. For outstanding versatility, the UHF-4200HL includes two comfortable and convertible lightweight headsets with detachable lavalier microphones. So, whether you’re leading a fitness class or giving a presentation, this system has you covered. And to ensure exceptional audio quality, the UHF-4200HL’s professional-grade microphones employ condenser elements with cardioid polar patterns and include foam inserts to reduce wind noise and popping. The discreet belt pack transmitters also provide convenient Power/Mute buttons and run on two AA batteries with up to eight hours of battery life.
Ditch the cables. Why restrict your performance with wires when the UHF-4200HL gives you total freedom of mobility? Ditch the cables and let your natural energy electrify the crowd with this high-quality wireless solution.
Dual UHF receivers with 250' range
US: 100 operating frequencies between 682MHz and 698MHz
EUR: 100 operating frequencies between 854MHz and 865MHz
Allows up to 8 mics to be used simultaneously without interference
Switchable automatic/manual frequency selection
Phase Locked Loop (PLL) circuitry for increased reception
RF and AF LED indicators for monitoring incoming signal strength
Auto mute with built-in noise reduction
Front panel output level control
Balance XLR and unbalanced 1/4" outputs
Microphone On/Off switch
Convertible, comfortable headset/lavalier mics with sensitivity and pop control
Discreet, lightweight belt pack transmitters
RECEIVER Frequency range: USA: 682-698MHzEurope: 854-865Mhz Receiving system: PLL synthesized Frequency Stability: +/- 0.005% Frequency Response: 50Hz-15kHz +/- 3dB Signal-to-Noise Ration: 90dB Modulation Mode: FM IF Frequency: 80.5 MHz T.H.D.: 1% (1kHz) Sensitivity: 10dBuV (FM: 40kHz, S/N>85dB) Power Supply: 12V DC Audio Output: Balanced XLR Unbalanced 1/4" Dimensions 210 x 138 x 45 mm
TRANSMITTER RF Power Output: <10dBm Oscillation Mode: PLL Synthesized Spurious Emission: 50dB below carrier freq. Frequency Stability: 30.005% with quartz control Max Modulation: +/-60kHz Current Consumption: 100mA Battery Type: Two (2) AA Alkaline Battery Life: 8 hours Microphone Element: Condenser Mic Polar Pattern: Cardioid Dimensions: 63x20x110mm
A 100-channel receiver, a bodypack transmitter, and headworn microphone.
The Nady UWS-100 HM3 Headset Wireless System includes a UWS-100 receiver, a WLT bodypack transmitter, and a uni-directional condenser HM-3 Headmic.
The Nady UWS-100 receiver is a 100-channel, select UHF Wireless System with 100 frequencies per 24MHz wide band, that are manually selectable or by autoscan feature for open channels. The UWS-100 offers unsurpassed state-of-the-art PLL UHF performance with 120dB dynamic range and operation up to 500' line-of-sight.
Other UWS-100 features include: ASC (Auto-Sync Channels) download which sends selected Group/Channel information to the transmitter using the IR sender for easy frequency synchronization; Tone Squelch circuitry for protection from RF interference; Front Panel Touch control buttons for ease-of-channel selection; ASC operation; and DigiTRU Diversity for maximum range and dropout protection.
The Nady WLT bodypack transmitter works perfectly with the UWS-100 and is designed for use with lapel microphones or the included HM3 Headmic.
Features:
Unsurpassed state-of-the-art PLL UHF performance with 120dB dynamic range and operation, up to 500 ft. (line-of-sight)
100 user-switchable UHF frequencies per band, or automatic open channel selection with convenient auto-scan feature
ASC (Auto-Sync Channels) download feature sends selected Group/Channel information to transmitter via IR sender for easy frequency synchronization
Front panel touch control buttons for ease of channel selection and ASC operation
Tone Squelch circuitry for protection from RF interference
DigiTRU Diversity for maximum range and dropout protection
AF level displays and folding dual antennas
Front panel On/Off button (with Power On LED indicator); full LED indicators including A/B diversity, Group/Channel selected, ASC transfer status, and bi color (green/red)
Back panel balanced XLR fixed Mic Level and adjustable unbalanced ¼" jack audio Line Level outputs; squelch (RF mute) adjust; DC input jack; volume control for ease of operation
Externally powered with included DC adapter (15 VDC 400 mA)
Rugged all-metal receiver designed for long-term durability.
WLT Bodypack Transmitters:
Off/Standby/On switch allows convenient audio muting with the transmitter on
Input level adjust
Locking 3.5mm jack
LED status indicator flashes once for unit on, lights steady for low-battery alert
HM-3 Condenser Headmic
Lightweight and designed for long comfortable wear
Omnidirectional condenser element provides exceptional audio with excellent transparency and gain before feedback
Comes with Mini-XLR or 3.5mm phone plug for your wireless bodypack transmitter
Requires low voltage phantom power as supplied by most wireless bodypack transmitters
Liberate your performance. Gemini’s UHF-5100HL Wireless Headset/Lavalier System provides clear, accurate vocal reproduction without the burden of cables, ensuring wired limitations never force you to sacrifice passion or energy during a performance. Ideal for DJs, presenters, fitness instructors, singers, MCs and anyone seeking a high-quality wireless headset or lavalier solution, the UHF-5100HL offers superior reliability, ultra-clear reception and an amazing amount of operating frequencies at a completely affordable price.
Crystal clear reception with frequencies to spare. Built to withstand the rigors of heavy use at events, meetings, auditoriums, fitness studios and houses of worship, the UHF-5100HL features a robust 1156-channel UHF receiver with a range of 250 feet. Using Phase Locked Loop (PLL) circuitry to prevent phasing issues that plague other wireless systems, the receiver’s front panel provides a Power button and rotary Volume control, along with Group and Channel adjustments for setting the desired frequency. RF and AF LED indicators also let you monitor incoming signal strength, while balanced XLR and unbalanced ¼-inch outputs offer true connecting convenience. The unit even gives you the option to set your frequency manually or allow the receiver to automatically find an optimal frequency.
Two wireless solutions for the price of one. For outstanding versatility, the UHF-5100HL includes a comfortable and convertible lightweight headset with a detachable lavalier microphone. So, whether you’re leading a spin class or giving a presentation, this system has you covered. And to ensure exceptional audio quality, the UHF-5100HL’s professional-grade microphone employs a condenser element with a cardioid polar pattern and includes foam inserts to reduce wind noise and popping. The discreet belt pack transmitter also provides a convenient Power/Mute button and runs on two AA batteries with up to eight hours of battery life.
Ditch the cables. Why restrict your performance with wires when the UHF-5100HL gives you total freedom of mobility? Ditch the cables and let your natural energy electrify the crowd with this high-quality wireless solution.
Single UHF receiver with 250' range
US: 1156 operating frequencies between 668MHz and 698MHz
EUR: 1156 operating frequencies between 835MHz and 865MHz
Allows up to 20 mics to be used simultaneously without interference
Switchable automatic/manual frequency selection
Phase Locked Loop (PLL) circuitry for increased reception
RF and AF LED indicators for moonitoring incoming signal strength
Auto mute with built-in noise reduction
Front panel output level control
Balance XLR and unbalanced 1/4" outputs
Microphone On/Off switch
Convertible, comfortable headset/lavalier mic with sensitivity and pop control
Discreet, lightweight belt pack transmitter
RECEIVER Frequency range: USA: 668-698MHz Europe: 835-865Mhz Receiving system: PLL synthesized Frequency Stability: +/- 0.005% Frequency Response: 50Hz-15kHz +/- 3dB Signal-to-Noise Ration: 95dB Modulation Mode: FM3 IF Frequency: 110 MHz; 10.7 MHz T.H.D.: 0.5%(1kHz0) Sensitivity: 6.5dBuV (FM: 40kHz, S/N>85dB Power Supply: 12V DC Audio Output: Balanced XLR Unbalanced 1/4" Dimensions 210 x 138 x 45 mm
TRANSMITTER RF Power Output: <10dBm Oscillation Mode: PLL Synthesized Spurious Emission: 50dB below carrier freq. Frequency Stability: 30.005% with quartz control Max Modulation: +/-70kHz Current Consumption: 120mA Battery Type: Two (2) AA Alkaline Battery Life: 6 hours Microphone Element: Condenser Mic Polar Pattern: Cardioid Dimensions: 63x20x110mm
The Encore Duet Wireless Headset Systems are full of top professional operating features and are hands free, thanks to the HM Series Headset. The Wireless Headset Systems are great for any type of performance or conference that requires vocals and you need your hands free.
Features:
Loaded with top professional operating features
Available on selected frequencies in the VHF high-band (171-216 MHz) for interference-free, long-range performance
Half-rack receiver design with retractable front panel antennas; single or dual receiver (side-by-side) optional rackmounting
RF and AF 5-LED displays for monitoring incoming signal strength and audio level; balanced XLR and unbalanced adjustable ¼” jack output
Unique snap-out panel locking tabs for single receiver or dual receiver (side-by-side) optional rackmounting
Noiseless transmitter On/Off switching
Features the Nady DM-20 unidirectional dynamic cartridge for optimum true sound, maximum feedback rejection and minimal handling noise
Operates up to 15 hours on a single 9V alkaline battery
Locking 3.5mm mini-jack provides secure connection for removable microphone or instrument cable
Easily accessible Input Level Adjust for optimum sound
Choice of three transmitters: WHT, WLT/WGT, or WPM-1V
WLT Bodypack Transmitters:
Choice of instrument, Headmic or lapel microphone bodypack transmitter for use with LM-14O omnidirectional or LM-14U unidirectional lapel microphone or Headmic Series microphones
Off/Standby/On switch allows convenient audio muting with the transmitter on
Input level adjust
Locking 3.5mm jack
LED status indicator flashes once for unit on, lights steady for low-battery alert
HM1 Headset:
Uni-directional dynamic element for top audio response — perfect for even the most exacting singing/performance applications
Adjustable gooseneck which can be set at any angle required by the user. The head worn support system is extremely light and
comfortable, and is designed to be visually unobtrusive while worn
Its ear rests and temple provide maximum stability during use, even while moving, dancing, or shaking the head. The durable cable
assembly and internal construction are designed to minimize handling noise from contact and movement
Available with Mini-XLR or 3.5mm phone plug for wired and wireless applications (fits most standard wireless bodypack transmitters)
The Encore Duet Wireless Headset Systems are full of top professional operating features and are hands free, thanks to the HM Series Headset. The Wireless Headset Systems are great for any type of performance or conference that requires vocals and you need your hands free.
Features:
Loaded with top professional operating features
Available on selected frequencies in the VHF high-band (171-216 MHz) for interference-free, long-range performance
Half-rack receiver design with retractable front panel antennas; single or dual receiver (side-by-side) optional rackmounting
RF and AF 5-LED displays for monitoring incoming signal strength and audio level; balanced XLR and unbalanced adjustable ¼” jack output
Unique snap-out panel locking tabs for single receiver or dual receiver (side-by-side) optional rackmounting
Noiseless transmitter On/Off switching
Features the Nady DM-20 unidirectional dynamic cartridge for optimum true sound, maximum feedback rejection and minimal handling noise
Operates up to 15 hours on a single 9V alkaline battery
Locking 3.5mm mini-jack provides secure connection for removable microphone or instrument cable
Easily accessible Input Level Adjust for optimum sound
Choice of three transmitters: WHT, WLT/WGT, or WPM-1V
WLT Bodypack Transmitters:
Choice of instrument, Headmic or lapel microphone bodypack transmitter for use with LM-14O omnidirectional or LM-14U unidirectional lapel microphone or Headmic Series microphones
Off/Standby/On switch allows convenient audio muting with the transmitter on
Input level adjust
Locking 3.5mm jack
LED status indicator flashes once for unit on, lights steady for low-battery alert
HM10 Headset:
Wide bandwidth omni-directional electret condenser mic ensures clean transparent audio and enhanced vocal pickup with improved gain before feedback
Durable thin-metal frame can be easily molded to any user
Ergonomic design and comfortable fit with or without glasses, hats, or headphones and no hairstyle hindrance
Available with Mini-XLR or 3.5mm phone plug for wired and wireless applications (fits most standard wireless bodypack transmitters). Available in black or beige color
Require low voltage phantom power as supplied by most wireless bodypack transmitters
A 100-channel receiver, a bodypack transmitter, and headworn microphone.
The Nady UWS-100 HM1 Headset Wireless System includes a UWS-100 receiver, a WLT bodypack transmitter, and a uni-directional condenser HM-1 Headmic.
The Nady UWS-100 receiver is a 100-channel, select UHF Wireless System with 100 frequencies per 24MHz wide band, that are manually selectable or by autoscan feature for open channels. The UWS-100 offers unsurpassed state-of-the-art PLL UHF performance with 120dB dynamic range and operation up to 500' line-of-sight.
Other UWS-100 features include: ASC (Auto-Sync Channels) download which sends selected Group/Channel information to the transmitter using the IR sender for easy frequency synchronization; Tone Squelch circuitry for protection from RF interference; Front Panel Touch control buttons for ease-of-channel selection; ASC operation; and DigiTRU Diversity for maximum range and dropout protection.
Features:
Unsurpassed state-of-the-art PLL UHF performance with 120dB dynamic range and operation, up to 500 ft. (line-of-sight)
100 user-switchable UHF frequencies per band, or automatic open channel selection with convenient auto-scan feature
ASC (Auto-Sync Channels) download feature sends selected Group/Channel information to transmitter via IR sender for easy frequency synchronization
Front panel touch control buttons for ease of channel selection and ASC operation
Tone Squelch circuitry for protection from RF interference
DigiTRU Diversity for maximum range and dropout protection
AF level displays and folding dual antennas
Front panel On/Off button (with Power On LED indicator); full LED indicators including A/B diversity, Group/Channel selected, ASC transfer status, and bi color (green/red)
Back panel balanced XLR fixed Mic Level and adjustable unbalanced ¼" jack audio Line Level outputs; squelch (RF mute) adjust; DC input jack; volume control for ease of operation
Externally powered with included DC adapter (15 VDC 400 mA)
Rugged all-metal receiver designed for long-term durability.
WLT Bodypack Transmitter
Off/Standby/On switch allows convenient audio muting with the transmitter on
Input level adjust
Locking 3.5mm jack
LED status indicator flashes once for unit on, lights steady for low-battery alert
HM-1 Headmic
Uni-directional dynamic element for top audio response—perfect for even the most exacting singing/performance applications
Adjustable gooseneck which can be set at any angle required by the user
The head worn support system is extremely light and
comfortable, and is designed to be visually unobtrusive while worn
Its ear rests and temple provide maximum stability during use, even while moving, dancing, or shaking the head
The durable cable assembly and internal construction are designed to minimize handling noise from contact and movement