The VHF-1001 VHF Wireless Microphone System is designed to provide clear natural sound quality in any environment. With a range of up to 100 feet you are provided the freedom to meander and interact with the crowd.
VHF-1001M has a HANDHELD unidirectional dynamic mic
The VHF-1001M comes with the VHF-1001 receiver and a VHF-04HHM unidirectional dynamic pop resistant microphone for feedback rejection and high-SPL handling.
The VHF-1001 is the perfect affordable wireless microphone for presentations, houses of worship, vocalists, musicians, DJ’s and public speaking venues.
Features:
High quality single channel VHF receiver with 100’ range
4 different channels that are matched to 4 different frequencies
The BRIDGE is the latest in portable vocal technology. With 2 wireless microphones, stereo RCA inputs, 1/8? audio input and an FM transmitter, it allows you to sing along to your favorite discs or Mp3s in the car or bus for hours of on-the-road fun. It also has a 1/8? audio input to connect your portable DVD Player, iPod, Laptop, or other audio device, for a total Mobile Vocal Experience.
Features:
Transmits music and vocals to FM radio
Two wireless microphones with individual volume controls
Choose from 3 FM stations: 87.9 FM, 87.7 FM, and 88.5 FM
1/4" (6.3mm) Mic-only vocals output
1/8" (3.5mm) input jack for connecting an iPod, Portable DVD Player, Laptop, or other audio device
Separate Left and Right stereo channel volume controls for music
Echo Level and Delay controls
FM send LED indicator shows when the FM transmitter is on
Shipping Dimensions: 13 3/4" (L) x 13 1/4" (W) x 3" (H)
High-band VHF (170-216 MHz) operation for interference-free performance
Advanced companding circuitry for a wide dynamic range (no overloading for loud inputs or background hiss during quiet use)
Full frequency response from 40-20,000 Hz
250 ft. typical operating range, up to 500+ ft. line-of-sight
DKW-1 mini portable receiver with unique space-saving, vertical design and Power On/Off switch; ¼” audio output jack; easily visible extra-large LED indicators for Power On, Transmitter On, and Audio Peak
WHT Handheld Microphone Transmitter:
Operates on a separate single frequency in the VHF 170-216MHz band
Features the Nady DM-10D unidirectional neodymium dynamic cartridge for optimum true sound, maximum feedback rejection and minimal handling noise
Off/Standby/On switch allows convenient audio muting with the transmitter on
Low-battery LED indicator flashes once for Unit On; lights steady for low-battery alert
Uses one 9V alkaline battery for 15+ hours operation
ATW-R250 receiver and ATW-T202 handheld ATW252 *Factory Refurbished* Box damage or minor blemish. FULL MANUFACTURERS WARRANTY*
ATW-R250 receiver and ATW-T202 handheld microphone/transmitter.
Audio-Technica’s Freeway 200 Series Wireless Systems are designed to provide reliable performance, easy setup and clear, natural sound quality. Available in handheld, headworn, guitar, lavalier and body-pack configurations, the 200 Series Freeway Wireless Systems are single-channel, fixed-frequency systems available in three VHF frequencies (169.505, 170.245, and 171.905 MHz).
Each 200 Series Freeway Wireless System includes the ATW-R250 receiver and either a body-pack transmitter or handheld microphone/ transmitter. The ATW-R250 is a non-diversity, single-channel receiver with advanced dipole antenna design for extended operating range, which improves operation by providing a ground element in addition to the usual signal element.
Easy operation and clear, natural sound quality
Reliable performance and durable construction
Advanced dipole antenna system for extended operating range
Power, RF, and AF Peak indicators
Volume control, ¼” output jack and space-saving power supply
Rugged unidirectional dynamic element on handheld microphone/transmitter
Variable microphone trim control and easily accessible On/Standby/Off switch on transmitters
Professional locking connector on UniPak body-pack transmitter
Available in 7 system configurations
OVERALL SYSTEM SPECIFICATIONS Operating Frequency: VHF high band, 169 MHz to 172 MHz Number of Channels: Fixed channel Frequency Stability: ±0.005% Modulation Mode: FM Maximum Deviation: ±15 kHz Operating Range: 200' typical Operating Temperature Range: 40° F (4° C) to 110° F (43° C) Frequency Response: 80 Hz to 13 kHz
RECEIVER SPECIFICATIONS Receiving System: Non-diversity, single-channel, dual antenna system Image Rejection: 50 dB minimum Signal-to-noise Ratio: 80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz Total Harmonic Distortion: <=1% (10 kHz deviation at 1 kHz) Sensitivity: 20 dBµV for 60 dB S/N (IEC-weighted) Audio Output: 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load) Output Connector: 1/4" TS ("mono") phone jack Power Supply: 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply Dimensions: 7.48" (190.0 mm) W x 1.65" (42.0 mm) H x 5.12" (130.0 mm) D Net Weight: 11.0 oz (311 g) Accessory Included: Power supply
BODY-PACK TRANSMITTER SPECIFICATIONS RF Power Output: 10 mW High position, 2 mW Low position, typical Spurious Emissions: Under federal regulations Dynamic Range: >=90 dB, A-weighted Input Connections: High impedance, low impedance, bias Battery: 9V (NEDA type 1604) alkaline, not included Current Consumption: 30 mA typical Battery Life: Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern) Dimensions: 2.56" (65.0 mm) W x 4.33" (110.0 mm) H x 1.00" (25.4 mm) D Net Weight: 2.8 oz (78 g) (without battery)
HANDHELD TRANSMITTER SPECIFICATIONS RF Power Output: 10 mW High position, 2 mW Low position, typical Spurious Emissions: Under federal regulations Dynamic Range: >=90 dB, A-weighted Microphone Element: Dynamic unidirectional Battery: 9V (NEDA type 1604) alkaline, not included Current Consumption: 30 mA typical Battery Life: Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern) Dimensions: 9.50" (241.3 mm) long, 2.10" (53.3 mm) maximum diameter Net Weight: 12.7 oz (360 g) (without battery) Accessory Included: AT8456a Quiet-Flex stand clamp
The VHF-2001 VHF Wireless Microphone System is designed to provide clear natural sound quality in any environment. With a range of up to 100 feet you are provided the freedom to meander and interact with the crowd.
VHF-2001M comes with two HANDHELD unidirectional dynamic mics
The VHF-2001M comes with the VHF-1001 receiver and two VHF-04HHM unidirectional dynamic pop resistant microphones for feedback rejection and high-SPL handling.
Features:
High quality dual channel VHF receiver with 100’ range
4 different channels that are matched to 4 different frequencies
The VHF-1000 Series Single Channel Wireless Microphones provides freedom for you to roam and mix with the crowd while ensuring you are heard above it all. Use the unidirectional, handheld dynamic pop resistant microphone or for total hands free operation, choose the combo Headset/Lavalier Mic with Belt Pack Transmitter. The VHF-1000 Series boosts affordability with high performance features for DJ's, Musicians, Vocalists, Public Speaker and Presentation venues or for any event to ensure people hear you. The system has a range of 100 feet and by using different frequencies; up to four VHF Series Wireless Microphones can be used at the same time.
FEATURES:
Reciever
High quality single channel VHF receiver with 100" range
Four separate preset frequencies between 176.6 MHz & 204.6 MHz
AF & RF LED indicators for monitoring incoming signal strength
Auto mute with squelch control & built in noise reduction
Ever find yourself thinking "if only I had one more wireless mic," or wanting to add a wireless mic to a non-wireless system? Now you can, thanks to the UHF-18 from VocoPro.
The UHF-18 is a single channel UHF wireless microphone module that can add wireless capability to any system with a 1/4" input. Designed as a plug-in module for VocoPro's HERO-RV, CHAMPION-RV and SOUNDMAN series, the UHF-18 is also a stand alone module that can hook up to any audio system with a 1/4" input.
So if you are looking to add a wireless mic to your system without the cost and bulk of a multiple mic system, pick up a UHF-18 today.
Features:
Complies with New FCC Frequency Rules
Can Be Used as a Plug-In Device or Independently
UHF Antenna Connects Securely with BNC Plug
Volume Control with Power Switch
1/4" Mic Out and DC Input for Independent Operation
Fits Expansion Ports on the HERO-RV, CHAMPION-RV, DVD-SOUNDMAN and SOUNDMAN
ATW-R800 receiver and ATW-T802 handheld dynamic unidirectional microphone/transmitter. Includes AT8456a Quiet-Flex stand clamp.
Featuring sleek, stackable, contemporary styling, Audio-Technica's System 8 Wireless Systems are designed for reliable performance, easy setup and clear, natural sound quality. Available in handheld, headworn, guitar, lavalier and body-pack configurations, these single-channel, fixed-frequency systems are available in three traveling VHF frequencies (169.505, 170.245, and 171.905 MHz).
Features:
Easy operation and clear, natural sound quality
Reliable performance and durable construction
Advanced dipole antenna system for extended operating range
Power, RF, and AF Peak indicators
Volume control, 1/4" output jack and user-adjustable squelch
Rugged unidirectional dynamic element on handheld microphone/transmitter
Variable microphone trim control and multi-color battery/power indicator, AA operation on transmitters
Professional locking connector on UniPak body-pack transmitter
Available in 7 system configurations
OVERALL SYSTEM SPECIFICATIONS Operating Frequency: VHF highband, 169 MHz to 172 MHz Modulation Mode: FM Maximum Deviation: +/-10 kHz Dynamic Range: >/=90 dB (A-weighted), typical Total Harmonic Distortion: <1% (at 1 kHz, +/-10 kHz deviation) Operating Range: 200' (60 m) typical Open range environment with no interfering signals Operating Temperature Range: 40° F (4° C) to 110° F (43° C) Battery performance may be reduced at very low temperatures Frequency Response: 80 Hz to 13 kHz
RECEIVER SPECIFICATIONS Receiving System: Non-diversity, single-channel, dual antenna system Image Rejection: 50 dB minimum RF Sensitivity: 20 dBuV at 60 dB S/N ratio (50 ohms termination) Audio Output: 1/4" (6.3 mm), unbalanced: 700 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load), nominal Power Supply: 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply Dimensions: 7.48" (190.0 mm) W x 1.82" (46.2 mm) H x 5.06" (128.5 mm) D Net Weight: 11.8 oz (335 grams) Accessory Included: Power supply
BODY-PACK TRANSMITTER SPECIFICATIONS RF Power Output: 10 mW Spurious Emissions: Following federal and national regulations Input Connections: Four-pin Locking Connector Pin 1: GND Pin 2: INST INPUT Pin 3: MIC INPUT Pin 4: DC BIAS +9V Batteries: Two 1.5V AA Alkaline (not included) Battery Life: 8 hours (alkaline) Depending on battery type and use pattern Dimensions: 2.76" (70.2 mm) W x 4.08" (103.7 mm) H x 0.98" (24.9 mm) D Net Weight: 3.0 oz (84.5 grams) (without battery)
HANDHELD TRANSMITTER SPECIFICATIONS RF Power Output: 10 mW Spurious Emissions: Following federal and national regulations Batteries: Two 1.5V AA Alkaline (not included) Battery Life: 8 hours (alkaline) Depending on battery type and use pattern Dimensions: 9.91" (251.8 mm) long, 2.11" (53.5 mm) diameter Net Weight: 9.2 oz (260 grams) (without battery) Accessory Included: AT8456a Quiet-Flex stand clamp
ATW-R250 receiver and ATW-T202 handheld microphone/transmitter.
Audio-Technica’s Freeway 200 Series Wireless Systems are designed to provide reliable performance, easy setup and clear, natural sound quality. Available in handheld, headworn, guitar, lavalier and body-pack configurations, the 200 Series Freeway Wireless Systems are single-channel, fixed-frequency systems available in three VHF frequencies (169.505, 170.245, and 171.905 MHz).
Each 200 Series Freeway Wireless System includes the ATW-R250 receiver and either a body-pack transmitter or handheld microphone/ transmitter. The ATW-R250 is a non-diversity, single-channel receiver with advanced dipole antenna design for extended operating range, which improves operation by providing a ground element in addition to the usual signal element.
Easy operation and clear, natural sound quality
Reliable performance and durable construction
Advanced dipole antenna system for extended operating range
Power, RF, and AF Peak indicators
Volume control, ¼” output jack and space-saving power supply
Rugged unidirectional dynamic element on handheld microphone/transmitter
Variable microphone trim control and easily accessible On/Standby/Off switch on transmitters
Professional locking connector on UniPak body-pack transmitter
Available in 7 system configurations
OVERALL SYSTEM SPECIFICATIONS Operating Frequency: VHF high band, 169 MHz to 172 MHz Number of Channels: Fixed channel Frequency Stability: ±0.005% Modulation Mode: FM Maximum Deviation: ±15 kHz Operating Range: 200' typical Operating Temperature Range: 40° F (4° C) to 110° F (43° C) Frequency Response: 80 Hz to 13 kHz
RECEIVER SPECIFICATIONS Receiving System: Non-diversity, single-channel, dual antenna system Image Rejection: 50 dB minimum Signal-to-noise Ratio: 80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz Total Harmonic Distortion: <=1% (10 kHz deviation at 1 kHz) Sensitivity: 20 dBµV for 60 dB S/N (IEC-weighted) Audio Output: 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load) Output Connector: 1/4" TS ("mono") phone jack Power Supply: 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply Dimensions: 7.48" (190.0 mm) W x 1.65" (42.0 mm) H x 5.12" (130.0 mm) D Net Weight: 11.0 oz (311 g) Accessory Included: Power supply
BODY-PACK TRANSMITTER SPECIFICATIONS RF Power Output: 10 mW High position, 2 mW Low position, typical Spurious Emissions: Under federal regulations Dynamic Range: >=90 dB, A-weighted Input Connections: High impedance, low impedance, bias Battery: 9V (NEDA type 1604) alkaline, not included Current Consumption: 30 mA typical Battery Life: Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern) Dimensions: 2.56" (65.0 mm) W x 4.33" (110.0 mm) H x 1.00" (25.4 mm) D Net Weight: 2.8 oz (78 g) (without battery)
HANDHELD TRANSMITTER SPECIFICATIONS RF Power Output: 10 mW High position, 2 mW Low position, typical Spurious Emissions: Under federal regulations Dynamic Range: >=90 dB, A-weighted Microphone Element: Dynamic unidirectional Battery: 9V (NEDA type 1604) alkaline, not included Current Consumption: 30 mA typical Battery Life: Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern) Dimensions: 9.50" (241.3 mm) long, 2.10" (53.3 mm) maximum diameter Net Weight: 12.7 oz (360 g) (without battery) Accessory Included: AT8456a Quiet-Flex stand clamp
The Gemini UHF-116 UHF Wireless Microphone System is designed to provide clear, natural sound in any environment over longer distances. The UHF-116 system provides users with a range of up to 250 feet over 16 selectable frequencies to ensure optimal transmission with no interference.
UHF-116M has a HANDHELD unidirectional dynamic mic
The UHF-116M includes the UHF-116 receiver and the UHF-16 HHM unidirectional dynamic pop resistant microphone for feedback rejection and high-SPL handling.
The UHF-116 provides unmatched performance and affordability in a wireless system for presentations, houses of worship, vocalists, musicians, DJ’s and public speaking venues.
Features:
High quality (single channel) UHF receiver with 250’ range
US: 16 operating frequencies between 682 MHz and 697 MHz
EUR: 16 operating frequencies between 854 MHz and 864 MHz
Phase Locked Loop (PLL) circuitry for increased reception
RF and AF LED indicators for monitoring incoming signal strength
Auto mute with squelch control and built-in noise reduction
The Audio-Technica 200 Series FreeWay Wireless Microphone System offers a reliable, cost-effective alternative to hardwired microphones. The system is available in a variety of configurations and this system includes an ATW-R200 VHF receiver and ATW-T202 handheld microphone transmitter.
The ATW-R200 VHF receiver is a single channel VHF receiver with dual dipole antennas for greater range and minimal RF noise. The receiver also features Power, AF and RF LED indicators on the front panel. The rear panel features a 1/4" phone output jack.
The ATW-T202 handheld transmitter is a rugged handheld microphone with a cardioid polar pattern for minimizing off-axis noise and feedback. The ATW-202 operates on a single 9V battery and features switchable RF output for increasing range when necessary.
The FreeWay systems are ideal for public address, speech and mobile DJ use.
Reliable VHF Transmission The ATW-R200 receiver features a VHF dipole antenna system that maximizes range while minimizing interference.
Handheld Microphone with Cardioid Pattern The handheld transmitter features a cardioid polar pattern for minimal off-axis noise and feedback.
Dual Output Power Switch The handheld transmitter feature switchable output power for increased range.
System Type of System: VHF Handheld RF Carrier Frequency Range: VHF high band, 169MHz to 172MHz Approx. Working Range: 200-feet (typical) Overall Frequency Response: 80Hz to 13kHz Signal-to-Noise Ratio: 80dB at 10kHz deviation (IEC-weighted), maximum modulation 15 kHz # Of Channels: Single Channel (T8 / 171.905 MHz) # Of Simultaneous Systems: Up to three
Receiver Type of Receiver: ATW-R250 Type of Outputs: 1/4" Phone Headphone Monitoring: No Power Requirements: 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply Battery Type/Approx. Life: No Display: No Antenna Type: Internal Dimensions (WxHxD): 7.48 x 1.65 x 5.12" (190 x 42 x 130mm) Weight: 11.0 oz (311 g)
Transmitter Type of Transmitter: VHF Handheld Type of Input Connector: None, Capsule Attached Type of Microphone: Dynamic Polar Pattern: Unidirectional (Cardioid) Interchangeable Mic Heads: No Battery Type/Approx. Life: 9V Alkaline Approximately 15 hours in High position Approximately 20 hours in Low position (depending on battery type and use pattern) Antenna Type: Dipole Display: Power LED Dimensions: 9.50 x 2.10" (241.3 x 53.3mm) (Length x Diameter) Weight: 12.7 oz (360 g)
The Audio-Technica 200 Series FreeWay Wireless Microphone System offers a reliable, cost-effective alternative to hardwired microphones. The system is available in a variety of configurations and this system includes an ATW-R200 VHF receiver and ATW-T202 handheld microphone transmitter.
The ATW-R200 VHF receiver is a single channel VHF receiver with dual dipole antennas for greater range and minimal RF noise. The receiver also features Power, AF and RF LED indicators on the front panel. The rear panel features a 1/4" phone output jack.
The ATW-T202 handheld transmitter is a rugged handheld microphone with a cardioid polar pattern for minimizing off-axis noise and feedback. The ATW-202 operates on a single 9V battery and features switchable RF output for increasing range when necessary.
The FreeWay systems are ideal for public address, speech and mobile DJ use.
Reliable VHF Transmission The ATW-R200 receiver features a VHF dipole antenna system that maximizes range while minimizing interference.
Handheld Microphone with Cardioid Pattern The handheld transmitter features a cardioid polar pattern for minimal off-axis noise and feedback.
Dual Output Power Switch The handheld transmitter feature switchable output power for increased range.
System Type of System: VHF Handheld RF Carrier Frequency Range: VHF high band, 169MHz to 172MHz Approx. Working Range: 200-feet (typical) Overall Frequency Response: 80Hz to 13kHz Signal-to-Noise Ratio: 80dB at 10kHz deviation (IEC-weighted), maximum modulation 15 kHz # Of Channels: Single Channel (T3 / 170.245 MHz) # Of Simultaneous Systems: Up to three
Receiver Type of Receiver: ATW-R250 Type of Outputs: 1/4" Phone Headphone Monitoring: No Power Requirements: 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply Battery Type/Approx. Life: No Display: No Antenna Type: Internal Dimensions (WxHxD): 7.48 x 1.65 x 5.12" (190 x 42 x 130mm) Weight: 11.0 oz (311 g)
Transmitter Type of Transmitter: VHF Handheld Type of Input Connector: None, Capsule Attached Type of Microphone: Dynamic Polar Pattern: Unidirectional (Cardioid) Interchangeable Mic Heads: No Battery Type/Approx. Life: 9V Alkaline Approximately 15 hours in High position Approximately 20 hours in Low position (depending on battery type and use pattern) Antenna Type: Dipole Display: Power LED Dimensions: 9.50 x 2.10" (241.3 x 53.3mm) (Length x Diameter) Weight: 12.7 oz (360 g)
The Audio-Technica 200 Series FreeWay Wireless Microphone System offers a reliable, cost-effective alternative to hardwired microphones. The system is available in a variety of configurations and this system includes an ATW-R200 VHF receiver and ATW-T202 handheld microphone transmitter.
The ATW-R200 VHF receiver is a single channel VHF receiver with dual dipole antennas for greater range and minimal RF noise. The receiver also features Power, AF and RF LED indicators on the front panel. The rear panel features a 1/4" phone output jack.
The ATW-T202 handheld transmitter is a rugged handheld microphone with a cardioid polar pattern for minimizing off-axis noise and feedback. The ATW-202 operates on a single 9V battery and features switchable RF output for increasing range when necessary.
The FreeWay systems are ideal for public address, speech and mobile DJ use.
Reliable VHF Transmission The ATW-R200 receiver features a VHF dipole antenna system that maximizes range while minimizing interference.
Handheld Microphone with Cardioid Pattern The handheld transmitter features a cardioid polar pattern for minimal off-axis noise and feedback.
Dual Output Power Switch The handheld transmitter feature switchable output power for increased range.
System Type of System: VHF Handheld RF Carrier Frequency Range: VHF high band, 169MHz to 172MHz Approx. Working Range: 200-feet (typical) Overall Frequency Response: 80Hz to 13kHz Signal-to-Noise Ratio: 80dB at 10kHz deviation (IEC-weighted), maximum modulation 15 kHz # Of Channels: Single Channel (T2 / 169.505 MHz) # Of Simultaneous Systems: Up to three
Receiver Type of Receiver: ATW-R250 Type of Outputs: 1/4" Phone Headphone Monitoring: No Power Requirements: 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply Battery Type/Approx. Life: No Display: No Antenna Type: Internal Dimensions (WxHxD): 7.48 x 1.65 x 5.12" (190 x 42 x 130mm) Weight: 11.0 oz (311 g)
Transmitter Type of Transmitter: VHF Handheld Type of Input Connector: None, Capsule Attached Type of Microphone: Dynamic Polar Pattern: Unidirectional (Cardioid) Interchangeable Mic Heads: No Battery Type/Approx. Life: 9V Alkaline Approximately 15 hours in High position Approximately 20 hours in Low position (depending on battery type and use pattern) Antenna Type: Dipole Display: Power LED Dimensions: 9.50 x 2.10" (241.3 x 53.3mm) (Length x Diameter) Weight: 12.7 oz (360 g)
Unprecedented value in a full-featured, single-channel UHF wireless mic system
Interference-free operation in any application or locale on select UHF frequencies
Half-rack receiver design with folding front panel dual antennas
Unique snap-out panel locking tabs for optional single receiver rackmounting or dual receiver (side-by-side) rackmounting
Tone Squelch™ for locking out potential interference
Nady’s proprietary companding circuitry for an industry-best 120dB dynamic range, and the clearest, most natural sound available
UHF-4 receiver with DigiTRU Diversity™ for maximum range and dropout protection; full LED indicators; ¼” unbalanced and XLR balanced outputs; special circuitry for noiseless transmitter On/Off switching
For those who have been looking for a wireless microphone system that's both reliable and super affordable, VocoPro is proud to introduce the VHF-3005. Superior sounding vocals, a clear signal and wireless freedom are what make the VHF-3005 an easy choice for singers and entertainers alike. This dual channel VHF wireless microphone system is the perfect solution for home karaoke, smaller gigs, public speaking and more. Both channels include individual volume controls for precise vocal balancing and individual 1/4" outputs for use with a receiver or mixer, allowing you pro-quality control over your vocal mix. The VHF-3005 is great for home entertainment, yet it has what it takes to withstand the challenges of public use. It is designed to better resist outside RF interference, so you can sing without any unwanted distractions. Set yourself free with a wireless system that's built to last and that will keep you sounding like great for years to come. Head to your local VocoPro dealer and pickup a VHF-3005 today.
Features:
2 wireless handheld mics included
2 mic outputs
Individual Volume controls for precise vocal balancing
Antennas provide clear RF reception
Rugged 1 RU metal receiver chassis
VHF Band (180 MHZ-250MHZ) Quartz Lock for Drift Free Operation
Rack-mountable with included mounting brackets
Shipping Dimensions: 12 3/4" (L) x 17 1/2" (W) x 4" (H)
An affordable, professional, easy-to-use portable wireless microphone system for use with video cameras. Also perfect for many other wireless mic applications, especially those requiring a miniature portable receiver
The Nady VR-3U UHF-3 Series Camera Mount UHF Wireless System includes a VR-3U single-channel receiver and choice of a UH-3 handheld or UB-3 lavalier/headset bodypack transmitter
Available on choice of three single UHF frequencies in the 500MHz UHF range
150 ft. operating range (300 ft. line-of-sight)
VR-3U Receiver:
Ultra-compact receiver can be camera mounted (with Velcro tape) or worn on the body (with removable attached clip)
LED light indicates receiving signal and low-battery
Tone Squelch for locking out potential interference
Convenient operation with 3.5mm balanced audio output jack and volume control with integrated off/on switch
Easy hookup to camcorder or mixer with supplied connecting cable (TRS 3.5mm mini-jack to XLR)
Attached soft-wire antenna
Powered by two AA Alkaline batteries in a convenient “slide open” battery compartment
UH-3 Handheld Microphone Transmitter:
Features the Nady DM-10D unidirectional neodymium dynamic cartridge for optimum true sound, maximum feedback rejection and minimal handling noise
Audio mute switch allows convenient audio muting with the transmitter on
Low-battery LED flashes once for unit on; lights solid red for low-battery alert
Power on LED lights solid green for unit on
Convenient, economical operation with two AA Alkaline batteries
All-metal housing for rugged durability
UB-3 Bodypack Transmitter:
Choice of head-worn or lavalier/lapel microphone operation
Available with LM-14O omni-directional/LM-14U uni-directional lavalier microphone or Headmic Series headworn microphones
Audio mute switch allows convenient audio muting with the transmitter on
Bi-color LED status indicator: Unit on (green); Low-battery alert (orange)
Locking 3.5mm mini jack provides secure connection for removable microphones
Easily accessible input level adjust control for optimum sound
Convenient, economical operation with two AAA Alkaline batteries
Full-range speaker system with built-in amplifier, mixer, and high-band VHF wireless receiver
Features noise reduction companding circuitry for quietest operation with a wide dynamic range
Built-in echo/reverb
Powerful 20W audio output
¼” unbalanced input jacks (Mic/Aux) and one ¼” unbalanced Record Out; treble and bass controls
Powered externally with provided AC adapter, or internally with either the optional RB-120 rechargeable battery or eight “D” cell alkaline or rechargeable batteries
Convenient internal charging ports for 9V rechargeable transmitter batteries (NiCad or Ni-MH) and RB-120 optional rechargeable battery
Available with choice of WHT handheld mic or WLT lavalier/headset mic bodypack transmitters.
WHT Handheld Microphone Transmitter:
Operates on a separate single frequency in the VHF 170-216MHz band
Features the Nady DM-10D unidirectional neodymium dynamic cartridge for optimum true sound, maximum feedback rejection and minimal handling noise
Odff/Standby/On switch allows convenient audio muting with the transmitter “on
Low-battery LED indicator flashes once for Unit On; lights steady for low-battery alert
Uses one 9V alkaline battery for 15+ hours operation
Gemini loves freedom Gemini’s UHF-4100M Wireless Handheld Mic System provides clear, accurate vocal reproduction without the burden of cables, ensuring wired limitations never force you to sacrifice passion or energy during a performance. Ideal for lead singers, MCs, DJs, karaoke enthusiasts and anyone seeking a high-quality wireless handheld solution, the UHF-4100M offers superior reliability and ultra-clear reception at a completely affordable price.
Roadworthy. Crystal clear. Frequency-agile Built to withstand the rigors of heavy touring or consistent use at bars, clubs, auditoriums and houses of worship, the UHF-4100M features a robust 100-channel UHF receiver with a range of 250 feet. Using Phase Locked Loop (PLL) circuitry to prevent phasing issues that plague other wireless systems, the receiver’s front panel provides a Power button and rotary Volume control, along with Group and Channel adjustments for setting the desired frequency. RF and AF LED indicators also let you monitor incoming signal strength, while balanced XLR and unbalanced ¼-inch outputs offer true connecting convenience. The unit even gives you the option to set your frequency manually or allow the receiver to automatically find an optimal frequency.
Professional vocal reproduction in the palm of your hand The UHF-4100M’s dynamic handheld microphone transmitter features a high-sensitivity cardioid capsule that gives your vocals the professional sound you crave, while noise absorption components within the mic barrel eliminate switch shock and handling noise. The transmitter also provides a convenient Power/Mute button and runs on two AA batteries with up to eight hours of battery life.
Ditch the cables Why restrict your performance with wires when the UHF-4100M gives you total freedom of mobility? Ditch the cables and let your natural energy electrify the crowd with this high-quality wireless solution.
Single UHF receiver with 250' range
US: 100 operating frequencies between 682MHz and 698MHz
EUR: 100 operating frequencies between 854MHz and 865MHz
Allows up to 8 mics to be used simultaneously without interference
Switchable automatic/manual frequency selection
Phase Locked Loop (PLL) circuitry for increased reception
RF and AF LED indicators for monitoring signal strength
RECEIVER Frequency range: USA: 682-698MHz Europe: 854-865Mhz Receiving system: PLL synthesized Frequency Stability: +/- 0.005% Frequency Response: 50Hz-15kHz +/- 3dB Signal-to-Noise Ration: 90dB Modulation Mode: FM IF Frequency: 80.5 MHz T.H.D.: 1% (1kHz) Sensitivity: 10dBuV (FM: 40kHz, S/N>85dB) Power Supply: 12V DC Audio Output: Balanced XLR Unbalanced 1/4" Dimensions 210 x 138 x 45 mm
TRANSMITTER RF Power Output: <10dBm Oscillation Mode: PLL Synthesized Spurious Emission: > 50dB below carrier freq. Frequency Stability: 30.005% with quartz control Max Modulation: +/-60kHz Current Consumption: 100mA Battery Type: Two (2) AA Alkaline Battery Life: 8 hours Microphone Element: Unidirectional Dynamic Mic Polar Pattern: Cardioid Dimensions: 250x38 mm
The Gemini UHF-216 UHF Wireless Microphone System is designed to provide clear, natural sound in any environment over longer distances. The UHF-216 system provides users with a range of up to 250 feet over 16 selectable frequencies to ensure optimal transmission with no interference.
UHF-116M comes with two HANDHELD unidirectional dynamic mics
The UHF-216M includes the UHF-116 receiver and two UHF-16 HHM unidirectional dynamic pop resistant microphones for feedback rejection and high-SPL handling.
The UHF-216 provides unmatched performance and affordability in a wireless system for presentations, houses of worship, vocalists, musicians, DJ’s and public speaking venues.
Features:
High quality (dual channel) UHF receivers with 250’ range
US: 16 operating frequencies per channel between 682 MHz and 697 MHz
EUR: 16 operating frequencies per channel between 854 MHz and 864 MHz
Phase Locked Loop (PLL) circuitry for increased reception
RF and AF LED indicators for monitoring incoming signal strength
Auto mute with squelch control and built-in noise reduction
Ever find yourself wanting to add wireless mics to a non-wireless system? Now you can, thanks to the UHF-28 from VocoPro.
The UHF-28 is a dual channel UHF wireless microphone module that can add wireless capability to any system with a 1/4" input. Designed as a plug-in module for VocoPro?s HERO-RV, CHAMPION-RV and SOUNDMAN series, the UHF-28 is also a stand alone module that can hook up to any audio system with a 1/4" input.
So if you are looking to add wireless mics to your system without the cost and bulk of a larger multiple mic system, pick up a UHF-28 today.
Features:
Complies with New FCC Frequency Rules
Can Be Used as a Plug-In Device or Independently
UHF Antenna Connects Securely with BNC Plug
Independent channel Volume Controls
1/4" Mic Out and DC Input for Independent Operation
Fits Expansion Ports on the HERO-RV, CHAMPION-RV, DVD-SOUNDMAN and SOUNDMAN
Microphones Requires Two AA Batteries Each
Power Adapter and 1/4" Patch Cable Included
Actual Dimensions: 6" (W) x 4.25" (D) x 1.25" (H)
Actual Weight: 2lbs.
Shipping Dimensions: 10.2" (L) x 14.2" (W) x 2.6" (H)
Clear channel UHF operation for optimum interference-free performance in any application or locale
Half-rack receiver design with folding front panel dual antennas
Unique snap-out panel locking tabs for optional single receiver rackmounting or dual receiver (side-by-side) rackmounting
Nady’s proprietary companding circuitry for an industry best 120dB dynamic range, and the clearest, most natural sound available
Tone Squelch for locking out potential interference
UHF-3 receiver with DigiTRU Diversity for maximum range and dropout protection, full LED indicators, ¼” unbalanced and XLR balanced outputs; special circuitry for noiseless transmitter On/Off switching
Choice of two transmitters: UH-3 or UB-3
UH-3 Handheld Microphone Transmitter:
Features the Nady DM-10D unidirectional neodymium dynamic cartridge for optimum true sound, maximum feedback rejection and minimal handling noise
Audio mute switch allows convenient audio muting with the transmitter on
Battery status LED (red) indicator flashes once for Battery OK; lights steady for low-battery alert
TX LED (green) indicator lights steady
Uses two AA alkaline or NiMH batteries
Rugged, all-metal housing
UB-3 Bodypack Transmitter:
Choice of instrument or headworn/lavalier microphone bodypack transmitter
Audio mute switch allows convenient audio muting with the transmitter on
Bi-color LED status indicator: Unit On (green); low-battery alert (orange)
Locking 3.5mm mini-jack provides secure connection for removable microphone or instrument cable
2 Channnel VHF Recharchable Wireless Microphone System
Need the freedom from cables that a wireless system provides but tired of constantly replacing batteries? Then the VHF-3300 is your answer, delivering fully rechargeable dual wireless microphones. The best part is how simple it is to recharge the batteries, and the bonus is the money and waste you'll save by going rechargeable. Just setting each mic in the terminal on top of the receiver while not in use is all you'll need to do to prepare the VHF-3300 for your next performance. It's that easy--no additional connections to worry about. VocoPro was the first to offer a rechargeable system that charges from it's own receiver stand, and we've done it again with the amazingly affordable VHF-3300.
Features:
2 Microphone Output via a Dual Antenna VHF Receiver
Unique HDAP (High Definition Audio Performance) technology ensures the best possible, most realistic sound at any time. The SR 40 Mini2 receiver provides three status LEDs each for channels 1 and 2, indicating ON/OFF status, received signal strength (RF OK), and audio clipping (AF CLIP). The VOLUME control sets the level at the ¼" output jack.
Each receiver comes with a universal 12-V switched mode power supply with EU, UK, and US adapters. The illuminated ON/OFF button switches both channels on and off simultaneously.
The rugged HT 40 Mini handheld transmitter features an ON/OFF/MUTE switch and a sturdy wire-mesh cap protecting the cardioid dynamic microphone element. Battery life is the same legendary 30 hours off a single AA battery as for the standard WMS 40 models, reducing the need to replace batteries and thus saving real money in the long run.
The system includes an SR 40 MINI2 receiver, 2 HT 40 MINI handheld transmitters, a universal power supply with US/UK/EU adapters, and 2 AA size dry batteries.
The Nady UWS-100 HT Handheld Wireless System includes a UWS-100 receiver and a WHT Handheld Microphone Transmitter.
The Nady UWS-100 receiver is a 100-channel, select UHF Wireless System with 100 frequencies per 24MHz wide band, that are manually selectable or by autoscan feature for open channels. The UWS-100 offers unsurpassed state-of-the-art PLL UHF performance with 120dB dynamic range and operation up to 500' line-of-sight.
Other UWS-100 features include: ASC (Auto-Sync Channels) download which sends selected Group/Channel information to the transmitter using the IR sender for easy frequency synchronization; Tone Squelch circuitry for protection from RF interference; Front Panel Touch control buttons for ease-of-channel selection; ASC operation; and DigiTRU Diversity for maximum range and dropout protection.
The Nady WHT Handheld Microphone Transmitter uses a Nady DM-10D unidirectional neodymium dynamic cartridge for optimum true sound, maximum feedback rejection and minimal handling noise.
Nady UWS-100 Unsurpassed state-of-the-art PLL UHF performance with 120dB dynamic range and operation, up to 500 ft. (line-of-sight) 100 user-switchable UHF frequencies per band, or automatic open channel selection with convenient auto-scan feature ASC (Auto-Sync Channels) download feature sends selected Group/Channel information to transmitter via IR sender for easy frequency synchronization Front panel touch control buttons for ease of channel selection and ASC operation Tone Squelch circuitry for protection from RF interference DigiTRU Diversity for maximum range and dropout protection AF level displays and folding dual antennas Front panel On/Off button (with Power On LED indicator); full LED indicators including A/B diversity, Group/Channel selected, ASC transfer status, and bi color (green/red) Back panel balanced XLR fixed Mic Level and adjustable unbalanced ¼" jack audio Line Level outputs; squelch (RF mute) adjust; DC input jack; volume control for ease of operation Externally powered with included DC adapter (15 VDC 400 mA) Rugged all-metal receiver designed for long-term durability.
WHT Handheld Microphone Transmitter Operates on a separate single frequency in the VHF 170-216MHz band Features the Nady DM-10D unidirectional neodymium dynamic cartridge for optimum true sound, maximum feedback rejection and minimal handling noise Off/Standby/On switch allows convenient audio muting with transmitter on Low-battery LED indicator flashes once for Unit On; lights steady for low-battery alert Uses one 9V alkaline battery for 15+ hours operation
Two discrete UHF wireless receivers in one housing for simultaneous operation of two transmitters
Back panel balanced XLR Mic Level outputs; unbalanced ¼” jack Line Level sum output; separate volume and external adjustable mute controls for each channel
Front panel LED display indicates TX signal received and 5-segment AF Level displays for each channel
Front panel dual telescoping retractable antennas
Exclusive patented companding circuitry and highest quality audio for unsurpassed 120dB dynamic range
Tone Squelch circuitry eliminates On/Off “pop” and provides protection from RF interference
Unique snap-out panel locking tabs for optional single receiver rackmounting or dual receiver (side-by-side) rackmounting
Externally powered with DC adapter (15VDC/0.4A) included
Choice of two transmitters: UH-4 or UB-4
UH-4 Handheld Microphone Transmitter:
Features the Nady DM-10D unidirectional neodymium dynamic cartridge for optimum true sound, maximum feedback rejection and minimal handling noise
Off/Standby/On switch allows convenient audio muting while transmitter on
Status LED indicator flashes once for Unit On; lights steady for low-battery alert
Gemini loves freedom. Gemini’s UHF-4200M Dual Wireless Handheld Mic System provides clear, accurate vocal reproduction without the burden of cables, ensuring wired limitations never force you to sacrifice passion or energy during a performance. Ideal for lead singers, MCs, DJs, karaoke enthusiasts and anyone seeking a high-quality wireless handheld solution, the UHF-4200M offers superior reliability and ultra-clear reception at a completely affordable price.
Roadworthy. Crystal clear. Frequency-agile. Built to withstand the rigors of heavy touring or consistent use at bars, clubs, auditoriums and houses of worship, the UHF-4200M features robust dual 100-channel UHF receivers with a range of 250 feet. Using Phase Locked Loop (PLL) circuitry to prevent phasing issues that plague other wireless systems, both receivers are housed in a single discreet enclosure with a front panel Power button. Each receiver has individual rotary Volume control, along with Group and Channel adjustments for setting the desired frequency. RF and AF LED indicators also let you monitor incoming signal strength, while balanced XLR and unbalanced ¼-inch outputs offer true connecting convenience. The unit even gives you the option to set your frequency manually or allow the receivers to automatically find an optimal frequency.
Professional vocal reproduction in the palm of your hand. The UHF-4200M’s dynamic handheld microphone transmitters feature high-sensitivity cardioid capsules that give your vocals the professional sound you crave, while noise absorption components within the mic barrels eliminate switch shock and handling noise. The transmitters also provide convenient Power/Mute buttons and run on two AA batteries with up to eight hours of battery life.
Ditch the cables. Why restrict your performance with wires when the UHF-4200M gives you total freedom of mobility? Ditch the cables and let your natural energy electrify the crowd with this high-quality wireless solution.
Dual UHF receivers with 250' range
US: 100 operating frequencies between 682MHz and 698MHz
EUR: 100 operating frequencies between 854MHz and 864MHz
Allows up to 8 mics to be used simultaneously without interference
Switchable automatic/manual frequency selection
Phase Locked Loop (PLL) circuitry for increased reception
RF and AF LED indicators for monitoring incoming signal strength
RECEIVER Frequency range: USA: 682-698MHz Europe: 854-865Mhz Receiving system: PLL synthesized Frequency Stability: +/- 0.005% Frequency Response: 50Hz-15kHz +/- 3dB Signal-to-Noise Ration: 90dB Modulation Mode: FM IF Frequency: 80.5 MHz T.H.D.: 1% (@ 1kHz) Sensitivity: 10dBuV (FM: 40kHz, S/N>85dB) Power Supply: 12V DC Audio Output: Balanced XLR Unbalanced 1/4" Dimensions 210 x 138 x 45 mm
TRANSMITTER RF Power Output: <10dBm Oscillation Mode: PLL Synthesized Spurious Emission: > 50dB below carrier freq. Frequency Stability: 30.005% with quartz control Max Modulation: +/-60kHz Current Consumption: 100mA Battery Type: Two (2) AA Alkaline Battery Life: 8 hours Microphone Element: Unidirectional Dynamic Mic Polar Pattern: Cardioid Dimensions: 250x38 mm
The UHF-3200 operates on the less-crowded UHF frequency band giving you a clearer, interference-free sound. Each mic channel has its own volume control and you can either output both channels independently or together using the "mixed output" channel. Enjoy wireless freedom at home or in the club with the UHF-3200.
Features:
Complies with New FCC Frequency Rules
2 wireless handheld mics included
2 unbalanced mic outputs (1/4") and 1 mixed output (1/4")
Rugged mic grills protect the microphone cartridge and prevent the mic from rolling
Individual volume controls for precise vocal balancing
Low battery indicator (LED) on mics
Dual antennas provide clear signal reception
Rugged 1 RU metal reciever chassis
Interference-resistant UHF Band operation
Shipping Dimensions: 12 3/4" (L) x 14 3/4" (W) x 3 3/4" (H)