Gooseneck Mics

Sort By: Name | Price

Gooseneck Mics

MX400SMP

$119.00

Compare

U855QL

$130.00

Compare

U855QL

List Price: ~~$130.00~~

Your Price: $130.00

Vendor Name

U855QL

Quantity:

Audio Technica

U855QL

Designed for use as a high-quality talk-back, paging and dispatch microphone in entertainment, commercial and industrial applications, the U855QL features a versatile gooseneck design which allows for flexible positioning and dependable performance. Its tailored frequency response ensures excellent intelligibility in environments with excessive ambient noise. An XLRM-type connector insert at the base allows the microphone to be plugged directly into an XLRF-type panel jack or microphone cable.

Features:

Designed for use as a high-quality talk-back, paging & dispatch microphone in entertainment, commercial and industrial applications
Extremely rugged all-metal construction for long-lasting performance
Quick-mount design with 3-pin XLRM-type connector insert at base plugs into any standard XLRF-type surface or cable connector
Low-profile element provides uniform cardioid polar pattern with 120º acceptance angle
Easy-to-adjust, rugged gooseneck permits quick positioning
Frequency response tailored for excellent intelligibility in environments with excessive ambient noise
Polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Protective screen reduces wind noise and “popping” when used extremely close

Element: Dynamic
Polar Pattern: Cardioid
Frequency Response: 150-16,000 Hz
Open Circuit Sensitivity: –53 dB (2.2 mV) re 1V at 1 Pa
Impedance: 600 ohms
Weight: 278 g (9.8 oz)
Dimensions: 448.0 mm (17.64") long,
30.0 mm (1.18") head diameter,
19.0 mm (0.75") base diameter
Output Connector: Integral 3-pin XLRM-type

PRO 49Q

$159.00

Compare

PRO 49Q

List Price: ~~$165.00~~

Your Price: $159.00

Vendor Name

PRO 49Q

Quantity:

Audio Technica

PRO 49Q

The PRO49Q quick-mount double-gooseneck cardioid condenser microphone is designed to plug into any standard XLRF-type surface or cable connector. With a flat, smooth frequency response and self-contained electronics, this mic features a quiet, fixed-placement, long-life gooseneck and wide-range condenser element with low-mass diaphragm for superior performance. Available in two lengths: 13.07" (PRO49Q); 16.46" (PRO49QL).

Features:

Wide-range condenser element with low-mass diaphragm for superior performance
Self-contained electronics eliminate need for external power modules
Flat, smooth frequency response
Quiet, fixed-placement long-life gooseneck
Plugs into any standard XLRF-type surface or cable connector
Overall length of 13.07" (332.0 mm)
Also available in a 16.46" (418.0 mm)-long version as PRO49QL

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 70-16,000 Hz
Open Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 106 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 66 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 9-52V DC, 2 mA typical
Weight: 2.8 oz (80 g)
Dimensions: 13.07" (332.0 mm) long, 0.47" (12.0 mm) head diameter, 0.74" (18.9 mm) base diameter
Output Connector: Integral 3-pin XLRM-type

MX405RLP/N

$161.00

Compare

MX405RLP/N

List Price: ~~$172.00~~

Your Price: $161.00

Vendor Name

MX405RLP/N

Quantity:

Shure

MX405RLP/N

5" Shock-Mounted Miniature Gooseneck Microphone, Supercardioid, Less Preamplifier

Flexible in more ways than one, Microflex Miniature Gooseneck microphones deliver unsurpassed style and performance for conference rooms and similar applications. Offering desktop or mounted bases, wired or wireless options, and even interchangeable cartridges, it's easy to get the perfect fit for your conferencing installation. Fully compatible with SLX wireless systems.

Features:

Available in 5 inch (127 mm) and 10 inch (254 mm) lengths
Cardioid and SuperCardioid Polar Patterns
Bi-color status indicator or single color light ring
Programmable Mute switch (desktop models only)
Logic Input/Output for remote LED and Mute control
Surface-mount and wired or wireless desktop base options
CommShield Technology for improved RF filtering

Type: Condenser (Electret Bias)
Frequency Response: 50-17000 Hz
Polar Pattern:- MX405/C, MX410/C: Cardioid- MX405/S, MX410/S: SuperCardioid
Output Impedance: EIA Rated at 150 &Amp;#937; (170 &Amp;#937; actual)
Output Configuration: Active Balanced
Sensitivity (at 1 kHz , open circuit Voltage):Cardioid: -35 dBV/PA (18 mV)SuperCardioid: -34 dBV/PA (21 mV)1 Pascal=94 dB SPL
Maximum SPL (1 kHz at 1% THD, 1 k&Amp;#937; load):Cardioid: 121 dBSupercardioid: 120 dB
Equivalent Output Noise (A-Weighted):Cardioid: 28 dB SPLSupercardioid: 27 dB SPL
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz):Cardioid: 66 dBSupercardioid: 68 dB
Dynamic Range (1 k&Amp;#937; load at 1 kHz): 93 dB
Common Mode Rejection (10 Hz to 100 kHz): 45 dB minimum
Preamplifier Output Clipping Level (1% THD): -8 dBV (0.4 V)
Polarity:3-Pin XLR: Positive Sound Pressure on Diaphragm produces positive Voltage on pin 2 relative to pin 3 of output XLR Connector.5-Pin XLR: Positive Sound Pressure on Diaphragm produces positive Voltage on pin 4 relative to pin 2 of output XLR Connector.
Net Weight:MX405: 0.054 kg (0.119 lbs)MX410: 0.068 kg (0.150 lbs)MX400DP: 0.516 kg (1.138 lbs)MX400SMP (w/ Kit): 0.125 kg (0.275 lbs)
Logic Connections:LED IN: Active low (&Amp;#8804;1.0V), TTL compatible. Absolute maximum Voltage: -0.7V to 50V.LOGIC OUT: Active low (&Amp;#8804;1.0V), sinks up to 20mA, TTL compatible. Absolute maximum Voltage: -0.7V to 50V (up to 50V through 3k&Amp;#937;).
Mute Switch Attenuation: -50 dB minimum
Cable: MX400DP: 6.1 m (20 ft) attached cable with shielded Audio pair terminated at a 3-pin male XLR and three unterminated conductors for logic control
Environmental Conditions:Operating Temperature: -18-57 C (0-135 F)Storage Temperature: -29-74 C (-20-165 F)Relative Humidity: 0-95%
Power Requirements: 48-52 Vdc phantom, 8.0 mA

MX410RLP/N

$161.00

Compare

MX410RLP/N

List Price: ~~$172.00~~

Your Price: $161.00

Vendor Name

MX410RLP/N

Quantity:

Shure

Microflex Modular Gooseneck Microphone

Microflex Modular Gooseneck microphones deliver unsurpassed style, flexibility and performance for conference rooms and similar applications. Offering desktop or mounted bases, wired or wireless options, and even interchangeable cartridges, it’s easy to get the perfect fit for your conferencing installation. Fully compatible with SLX Wireless Systems when used with MX890 Wireless Desktop Base.

Available Options:

MX410RLP/N: 0" (25.4 cm), light ring, less preamp (no microphone cartridge)

Features:

Available in 5" (12.7 cm), 10" (25.4 cm), and 15" (38.1 cm) lengths
Cardioid and supercardioid polar patterns
Bi-color status indicator or single color light ring
Programmable mute switch (desktop models only)
Logic input/output for remote LED and mute control
Surface-mount and wired or wireless desktop base options
CommShield Technology for improved RF filtering

Type: Condenser (electret bias)
Frequency Response: 50 to 17000 Hz
Polar Pattern: MX405/C, MX410/C, MX415/C: Cardioid, MX405/S, MX410/S, MX415/S: Supercardioid
Output Impedance: EIA Rated at 150 Ohms (170 Ohms actual)
Output Configuration: Active balanced
Sensitivity (at 1 kHz , open circuit voltage): Cardioid: -35 dBV/Pa (18 mV), Supercardioid: -34 dBV/Pa (21 mV),(1 Pascal=94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kilohm load): Cardioid: 121 dB, Supercardioid: 120 dB
Equivalent Output Noise (A-weighted): Cardioid: 28 dB SPL, Supercardioid: 27 dB SPL
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): Cardioid: 66 dB, Supercardioid: 68 dB
Dynamic Range (1 kilohm load at 1 kHz): 3 dB
Common Mode Rejection (10 Hz to 100 kHz): 45 dB minimum
Preamplifier Output Clipping Level (1% THD): -8 dBV (0.4 V)
Polarity: 3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector, 5-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector
Net Weight: MX410: 0.150 lbs (0.068 kg)
Logic Connections: LED IN: Active low (=1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V, LOGIC OUT: Active low (=1.0V), syncs up to 20mA, TTL compatible, Absolute maximum voltage: -0.7V to 50V (up to 50V through 3 kilohms)
Mute Switch Attenuation: -50 dB minimum
Cable: MX400DP: 20 ft (6.1 m) attached cable with shielded audio pair terminated at a 3-pin male XLR and three unterminated conductors for logic control
Environmental Conditions: Operating Temperature: -18 to 57 deg. C (0 to 135 deg. F), Storage Temperature: -29 to 74 deg. C (-20 to 165 deg. F), Relative Humidity: 0 to 95%
Power Requirements: 48 to 52 Vdc phantom, 8.0 mA

PRO 49QL

$165.00

Compare

PRO 49QL

List Price: ~~$165.00~~

Your Price: $165.00

Vendor Name

PRO 49QL

Quantity:

Audio Technica

PRO 49QL

The PRO49QL quick-mount double-gooseneck cardioid condenser microphone is designed to plug into any standard XLRF-type surface or cable connector. With a flat, smooth frequency response and self-contained electronics, this mic features a quiet, fixed-placement, long-life gooseneck and wide-range condenser element with low-mass diaphragm for superior performance. Available in two lengths: 13.07" (PRO49Q); 16.46" (PRO49QL).

Features:

Wide-range condenser element with low-mass diaphragm for superior performance
Self-contained electronics eliminate need for external power modules
Flat, smooth frequency response
Quiet, fixed-placement long-life gooseneck
Plugs into any standard XLRF-type surface or cable connector
Overall length of 16.46" (418.0 mm)
Also available in a 13.07" (332.0 mm)-long version as PRO49Q

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 70-16,000 Hz
Open Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 106 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 66 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 9-52V DC, 2 mA typical
Weight: 3.0 oz (84 g)
Dimensions: 16.46" (418.0 mm) long, 0.47" (12.0 mm) head diameter, 0.74" (18.9 mm) base diameter
Output Connector: Integral 3-pin XLRM-type

MX412/N

$169.40

Compare

MX412/N

List Price: ~~$181.00~~

Your Price: $169.40

Vendor Name

MX412/N

Quantity:

Shure

Microflex Standard Gooseneck Microphones

Microflex Standard Gooseneck microphones bring a whole new meaning to the word flexible with their fully adjustable gooseneck. Designed for easy replacement and available in cardioid, supercardioid and omnidirectional polar patterns, the interchangeable cartridges offer wide frequency response and accurate sound reproduction for a wide variety of applications, such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the Microflex product line for enhanced convenience and consistent sound.

Features:
Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive.

Gooseneck Microphones:
- 12" Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen

Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

Frequency Response: 50 to 17,000 Hz
Output Impedance: 180 ohms actual (EIA rated at 150 ohms)
Sensitivity (At 1,000 Hz, open circuit voltage*): Cardioid: -35.0 dBV/Pa (17.8 mV), Supercardioid: -33.5 dBV/Pa (21.1 mV), Omnidirectional: -27.5 dBV/Pa (42.2 mV), (All values -12 dB at 0 gain, *1 Pascal = 94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kilohm load): Cardioid: 124.2 dB, Supercardioid: 122.7 dB, Omnidirectional: 116.7 dB, (All values +6 dB at 0 gain)
Equivalent Output Noise (A-weighted): Cardioid: 28.0 dB SPL, Supercardioid: 26.5 dB SPL, Omnidirectional: 20.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL): Cardioid: 66.0 dB, Supercardioid: 67.5 dB, Omnidirectional: 73.5 dB
Dynamic Range at 1 kilohm load 96.2 dB: 100 dB at 0 gain
Common Mode Rejection: 45.0 dB minimum
Preamplifier Output Clipping Level (1% THD): -6.0 dBV (0.5 V), -12 dBV at 0 gain
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements: Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F), Relative Humidity: 0 to 95%

MX418/N

$169.40

Compare

MX418/N

List Price: ~~$181.00~~

Your Price: $169.40

Vendor Name

MX418/N

Quantity:

Shure

Microflex Standard Gooseneck Microphones

Microflex Standard Gooseneck microphones bring a whole new meaning to the word flexible with their fully adjustable
gooseneck. Designed for easy replacement and available in cardioid, supercardioid and omnidirectional polar patterns, the interchangeable cartridges offer wide frequency response and accurate sound reproduction for a wide variety of applications, such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the Microflex product line for enhanced convenience and consistent sound.

Features:

Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive.
Gooseneck Microphones:
- 18" Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

Frequency Response (Figure 1): 50 to 17,000 Hz
Output Impedance (at 1000 Hz): Rated at 150 Omega (180 Omega actual)
Sensitivity (At 1,000 Hz, open circuit voltage*): Cardioid: -35.0 dBV/Pa (17.8 mV), Supercardioid: -33.5 dBV/Pa (21.1 mV), Omnidirectional: -27.5 dBV/Pa (42.2 mV), (All values -12 dB at 0 gain, *1 Pascal = 94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kO load): Cardioid: 124.2 dB, Supercardioid: 122.7 dB, Omnidirectional: 116.7 dB, (All settings +6 dB at 0 gain)
Equivalent Output Noise (A-weighted): Cardioid: 28.0 dB SPL, Supercardioid: 26.5 dB SPL, Omnidirectional: 20.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL): Cardioid: 66.0 dB, Supercardioid: 67.5 dB, Omnidirectional: 73.5 dB
Dynamic Range at 1 kOmega Load: 96.2 dB, (100 dB at 0 gain)
Common Mode Rejection: 45.0 dB minimum
Mute Switch Attenuation (switched models only): 50.0 dB minimum
Preamplifier Output Clipping Level (1% THD): –6.0 dBV (0.5 V), (–12 dB at 0 gain)
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements: Operating Temperature Range: –18° C to 57° C (0° F to 135° F), Relative Humidity: 0 to 95%

MX418SE/N

$183.40

Compare

MX418SE/N

List Price: ~~$197.00~~

Your Price: $183.40

Vendor Name

MX418SE/N

Quantity:

Shure

Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive.
Gooseneck Microphones:
- 18" In-Line Preamp, Shock & Flange Mount, 10' Side- (or Bottom-) Exit Cable, Snap-Fit Foam Windscreen
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

Frequency Response (Figure 1): 50 to 17,000 Hz
Output Impedance (at 1000 Hz): Rated at 150 Omega (180 Omega actual)
Sensitivity (At 1,000 Hz, open circuit voltage): Cardioid: -35.0 dBV/Pa (17.8 mV), Supercardioid: -33.5 dBV/Pa (21.1 mV), Omnidirectional: -27.5 dBV/Pa (42.2 mV), (All values -12 dB at 0 gain, *1 Pascal = 94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kO load): Cardioid: 124.2 dB, Supercardioid: 122.7 dB, Omnidirectional: 116.7 dB, (All settings +6 dB at 0 gain)
Equivalent Output Noise (A-weighted): Cardioid: 28.0 dB SPL, Supercardioid: 26.5 dB SPL, Omnidirectional: 20.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL): Cardioid: 66.0 dB, Supercardioid: 67.5 dB, Omnidirectional: 73.5 dB
Dynamic Range at 1 kOmega Load: 96.2 dB, (100 dB at 0 gain)
Common Mode Rejection: 45.0 dB minimum
Mute Switch Attenuation (switched models only): 50.0 dB minimum
Preamplifier Output Clipping Level (1% THD): –6.0 dBV (0.5 V), (–12 dB at 0 gain)
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements: Operating Temperature Range: –18° C to 57° C (0° F to 135° F), Relative Humidity: 0 to 95%

MX412SE/N

$183.40

Compare

MX412SE/N

List Price: ~~$197.00~~

Your Price: $183.40

Vendor Name

MX412SE/N

Quantity:

Shure

Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive.
Gooseneck Microphones:
- 12" In-Line Preamp, Shock & Flange Mount, 10' Side- (or Bottom-) Exit Cable, Snap-Fit Foam Windscreen
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

Frequency Response (Figure 1): 50 to 17,000 Hz
Output Impedance (at 1000 Hz): Rated at 150 Omega (180 Omega actual)
Sensitivity (At 1,000 Hz, open circuit voltage*): Cardioid: -35.0 dBV/Pa (17.8 mV) , Supercardioid: -33.5 dBV/Pa (21.1 mV),Omnidirectional: -27.5 dBV/Pa (42.2 mV), (All values -12 dB at 0 gain, *1 Pascal = 94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kO load): Cardioid: 124.2 dB, Supercardioid: 122.7 dB, Omnidirectional: 116.7 dB, (All settings +6 dB at 0 gain)
Equivalent Output Noise (A-weighted): Cardioid: 28.0 dB SPL, Supercardioid: 26.5 dB SPL, Omnidirectional: 20.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL): Cardioid: 66.0 dB, Supercardioid: 67.5 dB, Omnidirectional: 73.5 dB
Dynamic Range at 1 kOmega Load: 96.2 dB, (100 dB at 0 gain)
Common Mode Rejection: 45.0 dB minimum
Mute Switch Attenuation (switched models only): 50.0 dB minimum
Preamplifier Output Clipping Level (1% THD): –6.0 dBV (0.5 V), (–12 dB at 0 gain)
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements: Operating Temperature Range: –18° C to 57° C (0° F to 135° F), Relative Humidity: 0 to 95%

PRO 47TL

$185.00

Compare

PRO 47TL

List Price: ~~$185.00~~

Your Price: $185.00

Vendor Name

PRO 47TL

Quantity:

Audio Technica

PRO 47TL

This double-gooseneck cardioid condenser microphone with integral power module and 5/8"-27 adapter-mount is ideal for boardroom, school, government, house of worship and other installed applications. Featuring a wide-range condenser element with low-mass diaphragm for superior performance, the microphone's self-contained electronics eliminate need for external power modules. Available in two lengths: 15.79" (PRO47TL) and 12.40" (PRO47T).

Features:

Wide-range condenser element with low-mass diaphragm for superior performance
Self-contained electronics eliminate need for external power modules
Flat, smooth frequency response
Quiet, fixed-placement, long-life gooseneck
Direct mounts to any 5/8"-27 stand, or to included threaded mounting stud
9.8' (3.0 m) cable permanently attached between microphone and XLRM-type connector
Overall length of 15.79" (401.0 mm)
Also available in a 12.40" (315.0 mm)-long version as PRO47T

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 70-16,000 Hz
Open Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 106 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 66 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 9-52V DC, 2 mA typical
Weight: 2.4 oz (67 g)
Dimensions: 15.79" (401.0 mm) long, 0.47" (12.0 mm) head diameter
Output Connector: 3-pin XLRM-type on cable
Cable: 9.8' (3.0 m) long, permanently attached
Accessories: AT8146 windscreen; AT8425 5/8"-27 threaded mounting stud

PRO 47T

$185.00

Compare

PRO 47T

List Price: ~~$185.00~~

Your Price: $185.00

Vendor Name

PRO 47T

Quantity:

Audio Technica

PRO 47T

This double-gooseneck cardioid condenser microphone with integral power module and 5/8"-27 adapter-mount is ideal for boardroom, school, government, house of worship and other installed applications. Featuring a wide-range condenser element with low-mass diaphragm for superior performance, the microphone self-contained electronics eliminate need for external power modules. Available in two lengths: 12.40" (PRO47T) and 15.79" (PRO47TL).

Features:

Wide-range condenser element with low-mass diaphragm for superior performance
Self-contained electronics eliminate need for external power modules
Flat, smooth frequency response
Quiet, fixed-placement, long-life gooseneck
Direct mounts to any 5/8"-27 stand, or to included threaded mounting stud
9.8' (3.0 m) cable permanently attached between microphone and XLRM-type connector
Overall length of 12.40" (315.0 mm)
Also available in a 15.79" (401.0 mm)-long version as PRO47TL

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 70-16,000 Hz
Open Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 106 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 66 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 9-52V DC, 2 mA typical
Weight: 2.2 oz (63 g)
Dimensions: 12.40" (315.0 mm) long, 0.47" (12.0 mm) head diameter
Output Connector: 3-pin XLRM-type on cable
Cable: 9.8' (3.0 m) cable permanently attached between microphone and XLRM-type connector
Accessories: AT8146 windscreen; AT8425 5/8"-27 threaded mounting stud

MX418S/N

$191.80

Compare

MX418S/N

List Price: ~~$205.00~~

Your Price: $191.80

Vendor Name

MX418S/N

Quantity:

Shure

Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive.
Gooseneck Microphones:
- 18" Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen, Mute Switch, LED Indicator
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

MX412S/N

$191.80

Compare

MX412S/N

List Price: ~~$205.00~~

Your Price: $191.80

Vendor Name

MX412S/N

Quantity:

Shure

Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive.
Gooseneck Microphones:
- 12" Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen, Mute Switch, LED Indicator
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

Frequency Response (Figure 1): 50 to 17,000 Hz
Output Impedance (at 1000 Hz): Rated at 150 Omega (180 Omega actual)
Sensitivity (At 1,000 Hz, open circuit voltage*): Cardioid: -35.0 dBV/Pa (17.8 mV), Supercardioid: -33.5 dBV/Pa (21.1 mV), Omnidirectional: -27.5 dBV/Pa (42.2 mV, (All values -12 dB at 0 gain, *1 Pascal = 94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kO load): Cardioid: 124.2 dB, Supercardioid: 122.7 dB, Omnidirectional: 116.7 dB, (All settings +6 dB at 0 gain)
Equivalent Output Noise (A-weighted): Cardioid: 28.0 dB SPL, Supercardioid: 26.5 dB SPL, Omnidirectional: 20.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL): Cardioid: 66.0 dB, Supercardioid: 67.5 dB, Omnidirectional: 73.5 dB
Dynamic Range at 1 kOmega Load: 96.2 dB, (100 dB at 0 gain)
Common Mode Rejection: 45.0 dB minimum
Mute Switch Attenuation (switched models only): 50.0 dB minimum
Preamplifier Output Clipping Level (1% THD): –6.0 dBV (0.5 V), (–12 dB at 0 gain)
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements: Operating Temperature Range: –18° C to 57° C (0° F to 135° F), Relative Humidity: 0 to 95%

MX405LP/C

$207.20

Compare

MX405LP/C

List Price: ~~$221.00~~

Your Price: $207.20

Vendor Name

MX405LP/C

Quantity:

Shure

MX405LP/C

5" Shock-Mounted Miniature Gooseneck Microphone, Cardioid, Less Preamplifier

Flexible in more ways than one, Microflex Miniature Gooseneck microphones deliver unsurpassed style and performance for conference rooms and similar applications. Offering desktop or mounted bases, wired or wireless options, and even interchangeable cartridges, it's easy to get the perfect fit for your conferencing installation. Fully compatible with SLX wireless systems.

Features:

Available in 5 inch (127 mm) and 10 inch (254 mm) lengths
Cardioid and SuperCardioid Polar Patterns
Bi-color status indicator or single color light ring
Programmable Mute switch (desktop models only)
Logic Input/Output for remote LED and Mute control
Surface-mount and wired or wireless desktop base options
CommShield Technology for improved RF filtering

MX410LP/C

$207.20

Compare

MX410LP/C

List Price: ~~$221.00~~

Your Price: $207.20

Vendor Name

MX410LP/C

Quantity:

Shure

MX410LP/C: 10" (25.4 cm), bi-color status indicator, less preamp (cardioid polar pattern)

Features:

Available in 5" (12.7 cm), 10" (25.4 cm), and 15" (38.1 cm) lengths
Cardioid and supercardioid polar patterns
Bi-color status indicator or single color light ring
Programmable mute switch (desktop models only)
Logic input/output for remote LED and mute control
Surface-mount and wired or wireless desktop base options
CommShield Technology for improved RF filtering

Type: Condenser (electret bias)
Frequency Response: 50 to 17000 Hz
Polar Pattern: MX405/C, MX410/C, MX415/C: Cardioid
Output Impedance: EIA Rated at 150 Ohms (170 Ohms actual)
Output Configuration: Active balanced
Sensitivity (at 1 kHz , open circuit voltage): Cardioid: -35 dBV/Pa (18 mV), (1 Pascal=94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kilohm load): Cardioid: 121 dB
Equivalent Output Noise (A-weighted): Cardioid: 28 dB SPL
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): Cardioid: 66 dB
Dynamic Range (1 kilohm load at 1 kHz): 3 dB
Common Mode Rejection (10 Hz to 100 kHz): 45 dB minimum
Preamplifier Output Clipping Level (1% THD): -8 dBV (0.4 V)
Polarity: 3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector, 5-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector
Net Weight: MX410: 0.150 lbs (0.068 kg)
Logic Connections: LED IN: Active low (=1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V, LOGIC OUT: Active low (=1.0V), syncs up to 20mA, TTL compatible, Absolute maximum voltage: -0.7V to 50V (up to 50V through 3 kilohms)
Mute Switch Attenuation: -50 dB minimum
Cable: MX400DP: 20 ft (6.1 m) attached cable with shielded audio pair terminated at a 3-pin male XLR and three unterminated conductors for logic control
Environmental Conditions: Operating Temperature: -18 to 57 deg. C (0 to 135 deg. F), Storage Temperature: -29 to 74 deg. C (-20 to 165 deg. F), Relative Humidity: 0 to 95%
Power Requirements: 48 to 52 Vdc phantom, 8.0 mA

U859QL

$210.00

Compare

U859QL

List Price: ~~$210.00~~

Your Price: $210.00

Vendor Name

U859QL

Quantity:

Audio Technica

U859QL

Designed to plug directly into a panel- or desk-mounted XLRF-type connector, the U859QL features an ultra-flexible small-diameter gooseneck and accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine line cardioid polar patterns. Equipped with self-contained electronics, the phantom-powered microphone also offers an 80 Hz low-cut UniSteep filter that reduces pickup of low-frequency ambient noise. The microphone is 18.90" long.

Features:

Designed for high-quality sound reinforcement, professional recording and broadcasting
Superior off-axis rejection for maximum gain before feedback
Easy-to-adjust, rugged, small-diameter, alternating gooseneck with virtually no 'memory' permits quick positioning into desired shape
UniSteep filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
Self-contained electronics eliminate need for external power module
Quick-mount design with 3-pin XLRM-type connector insert at base plugs into any standard XLRF-type surface or cable connector

Element: Fixed-charge back plate permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 100-16,000 Hz
Low Frequency Roll Off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: 43 dB (7.0 mV) re 1V at 1 Pa
Impedance: 250 ohms
Maximum Input Sound Level: 140 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 111 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 65 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 2 mA typical
Switch: Flat, roll-off
Weight: 5.4 oz (152 g)
Dimensions: 18.90" (480.0 mm) long, 0.48" (12.3 mm) head diameter, 0.74" (18.9 mm) base diameter
Output Connector: Integral 3-pin XLRM-type

MX410LP/S

$214.20

Compare

MX410LP/S

List Price: ~~$229.00~~

Your Price: $214.20

Vendor Name

MX410LP/S

Quantity:

Shure

MX410LP/S: 10" (25.4 cm), bi-color status indicator, less preamp (supercardioid polar pattern)

Features:

Available in 5" (12.7 cm), 10" (25.4 cm), and 15" (38.1 cm) lengths
Cardioid and supercardioid polar patterns
Bi-color status indicator or single color light ring
Programmable mute switch (desktop models only)
Logic input/output for remote LED and mute control
Surface-mount and wired or wireless desktop base options
CommShield Technology for improved RF filtering

Type: Condenser (electret bias)
Frequency Response: 50 to 17000 Hz
Polar Pattern: MX405/S, MX410/S, MX415/S: Supercardioid
Output Impedance: EIA Rated at 150 Ohms (170 Ohms actual)
Output Configuration: Active balanced
Sensitivity (at 1 kHz , open circuit voltage): Supercardioid: -34 dBV/Pa (21 mV), (1 Pascal=94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kilohm load): Supercardioid: 120 dB
Equivalent Output Noise (A-weighted): Supercardioid: 27 dB SPL
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): Supercardioid: 68 dB
Dynamic Range (1 kilohm load at 1 kHz): 3 dB
Common Mode Rejection (10 Hz to 100 kHz): 45 dB minimum
Preamplifier Output Clipping Level (1% THD): -8 dBV (0.4 V)
Polarity: 3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector, 5-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector
Net Weight: MX410: 0.150 lbs (0.068 kg)
Logic Connections: LED IN: Active low (=1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V, LOGIC OUT: Active low (=1.0V), syncs up to 20mA, TTL compatible, Absolute maximum voltage: -0.7V to 50V (up to 50V through 3 kilohms)
Mute Switch Attenuation: -50 dB minimum
Cable: MX400DP: 20 ft (6.1 m) attached cable with shielded audio pair terminated at a 3-pin male XLR and three unterminated conductors for logic control
Environmental Conditions: Operating Temperature: -18 to 57 deg. C (0 to 135 deg. F), Storage Temperature: -29 to 74 deg. C (-20 to 165 deg. F), Relative Humidity: 0 to 95%
Power Requirements: 48 to 52 Vdc phantom, 8.0 mA

MX405LP/S

$214.20

Compare

MX405LP/S

List Price: ~~$229.00~~

Your Price: $214.20

Vendor Name

MX405LP/S

Quantity:

Shure

MX405LP/S

5" Shock-Mounted Miniature Gooseneck Microphone, Supercardioid, Less Preamplifier

Flexible in more ways than one, Microflex Miniature Gooseneck microphones deliver unsurpassed style and performance for conference rooms and similar applications. Offering desktop or mounted bases, wired or wireless options, and even interchangeable cartridges, it's easy to get the perfect fit for your conferencing installation. Fully compatible with SLX wireless systems.

Features:

Available in 5 inch (127 mm) and 10 inch (254 mm) lengths
Cardioid and SuperCardioid Polar Patterns
Bi-color status indicator or single color light ring
Programmable Mute switch (desktop models only)
Logic Input/Output for remote LED and Mute control
Surface-mount and wired or wireless desktop base options
CommShield Technology for improved RF filtering

US690

$219.00

Compare

US690

List Price: ~~$316.50~~

Your Price: $219.00

Vendor Name

US690

Quantity:

Electro Voice

Gooseneck Microphone

US690 12” flexible gooseneck microphone’s neodymium magnet structure provides up to 6 dB more sensitivity than conventional designs. The US690 terminates with an XLRtype connector and plug-in mount. Its rugged design and mic element make the US690 ideal for the most demanding applications where superb sound is required

Features:

Designed for Commercial Sound/Life Safety, House of Worship, and other applications.
12” gooseneck
Dynamic element
Cardioid polar pattern
Powerful neodymium magnet structure
XLR termination

MX418/C

$221.20

Compare

MX418/C

List Price: ~~$237.00~~

Your Price: $221.20

Vendor Name

MX418/C

Quantity:

Shure

Microflex Standard Gooseneck Microphones

Microflex Standard Gooseneck microphones bring a whole new meaning to the word flexible with their fully adjustable
gooseneck. Designed for easy replacement and available in cardioid, supercardioid and omnidirectional polar patterns, the interchangeable cartridges offer wide frequency response and accurate sound reproduction for a wide variety of applications, such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the Microflex product line for enhanced convenience and consistent sound.

Features:

Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive.
Gooseneck Microphones:
- 18" Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

Frequency Response (Figure 1): 50 to 17,000 Hz
Output Impedance (at 1000 Hz): Rated at 150 Omega (180 Omega actual)
Sensitivity (At 1,000 Hz, open circuit voltage*): Cardioid: -35.0 dBV/Pa (17.8 mV), (All values -12 dB at 0 gain, *1
Pascal = 94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kO load): Cardioid: 124.2 dB, (All settings +6 dB at 0 gain)
Equivalent Output Noise (A-weighted): Cardioid: 28.0 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL): Cardioid: 66.0 dB
Dynamic Range at 1 kOmega Load: 96.2 dB, (100 dB at 0 gain)
Common Mode Rejection: 45.0 dB minimum
Mute Switch Attenuation (switched models only): 50.0 dB minimum
Preamplifier Output Clipping Level (1% THD): –6.0 dBV (0.5 V), (–12 dB at 0 gain)
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements: Operating Temperature Range: –18° C to 57° C (0° F to 135° F), Relative Humidity: 0 to 95%

MX412/C

$221.20

Compare

MX412/C

List Price: ~~$237.00~~

Your Price: $221.20

Vendor Name

MX412/C

Quantity:

Shure

Gooseneck Microphones:
- 12" Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

Frequency Response (Figure 1): 50 to 17,000 Hz
Output Impedance (at 1000 Hz): Rated at 150 Omega (180 Omega actual)
Open Circuit Sensitivity (at 1 kHz, ref. 1 V/Pascal): Cardioid: –35.0 dB (17.8 mV), (All settings –12 dB at 0 gain,
*1 Pascal = 94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kO load): Cardioid: 124.2 dB, (All settings +6 dB at 0 gain)
Equivalent Output Noise (A-weighted): Cardioid: 28.0 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL): Cardioid: 66.0 dB
Dynamic Range at 1 kOmega Load: 96.2 dB, (100 dB at 0 gain)
Common Mode Rejection: 45.0 dB minimum
Mute Switch Attenuation (switched models only): 50.0 dB minimum
Preamplifier Output Clipping Level (1% THD): –6.0 dBV (0.5 V), (–12 dB at 0 gain)
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements: Operating Temperature Range: –18° C to 57° C (0° F to
135° F), Relative Humidity: 0 to 95%

MX400DP

$222.60

Compare

MX415LP/C

$226.00

Compare

MX415LP/C

List Price: ~~$226.00~~

Your Price: $226.00

Vendor Name

MX415LP/C

Quantity:

Shure

Microflex Modular Gooseneck Microphones

Condenser: Lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances. Powered by battery or phantom power supply.

Microflex Modular Gooseneck microphones deliver unsurpassed style, flexibility and performance for conference rooms and similar applications. Offering desktop or mounted bases, wired or wireless options, and even interchangeable cartridges, it’s easy to get the perfect fit for your conferencing installation. Fully compatible with SLX Wireless Systems when used with MX890 Wireless Desktop Base.

Available Options: MX415LP/C 15" (38.1 cm) gooseneck, less preamp, bi-color status indicator (cardioid or supercardioid polar pattern)

Features:

Available in 5" (12.7 cm), 10" (25.4 cm), and 15" (38.1 cm) lengths
Cardioid and supercardioid polar patterns
Bi-color status indicator or single color light ring
Programmable mute switch (desktop models only)
Logic input/output for remote LED and mute control
Surface-mount and wired or wireless desktop base options
CommShield Technology for improved RF filtering

Type: Condenser (electret bias)
Frequency Response: 50 to 17000 Hz
Polar Pattern: MX415/C: Cardioid
Output Impedance: EIA Rated at 150 Ohms (170 Ohms actual)
Output Configuration: Active balanced
Sensitivity (at 1 kHz , open circuit voltage): Cardioid: -35 dBV/Pa (18 mV), 1 Pascal=94 dB SPL
Maximum SPL (1 kHz at 1% THD, 1 kilohm load): Cardioid: 121 dB
Equivalent Output Noise (A-weighted): Cardioid: 28 dB SPL
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): Cardioid: 66 dB
Dynamic Range (1 kilohm load at 1 kHz): 3 dB
Common Mode Rejection (10 Hz to 100 kHz): 45 dB minimum
Preamplifier Output Clipping Level (1% THD): -8 dBV (0.4 V)
Polarity: 3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
5-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector
Net Weight: MX415: .154 lbs (.07kg)
Logic Connections: LED IN: Active low (=1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V, LOGIC OUT: Active low (=1.0V), syncs up to 20mA, TTL compatible, Absolute maximum voltage: -0.7V to 50V (up to 50V through 3 kilohms)
Mute Switch Attenuation: -50 dB minimum
Cable: MX400DP: 20 ft (6.1 m) attached cable with shielded audio pair terminated at a 3-pin male XLR and three unterminated conductors for logic control
Environmental Conditions:
Operating Temperature: -18 to 57 deg. C (0 to 135 deg. F)
Storage Temperature: -29 to 74 deg. C (-20 to 165 deg. F)
Relative Humidity: 0 to 95%
Power Requirements: 48 to 52 Vdc phantom, 8.0 mA

MX412/S

$228.20

Compare

MX412/S

List Price: ~~$245.00~~

Your Price: $228.20

Vendor Name

MX412/S

Quantity:

Shure

Gooseneck Microphones:
- 12" Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen

Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

Frequency Response: 50 to 17,000 Hz
Output Impedance: 180 ohms actual (EIA rated at 150 ohms)
Sensitivity (At 1,000 Hz, open circuit voltage*): Supercardioid: -33.5 dBV/Pa (21.1 mV), (All values -12 dB at 0 gain, *1 Pascal = 94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kilohm load): Supercardioid: 122.7 dB, (All values +6 dB at 0 gain)
Equivalent Output Noise (A-weighted): Supercardioid: 26.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL): Supercardioid: 67.5 dB
Dynamic Range at 1 kilohm load 96.2 dB: 100 dB at 0 gain
Common Mode Rejection: 45.0 dB minimum
Preamplifier Output Clipping Level (1% THD): -6.0 dBV (0.5 V), -12 dBV at 0 gain
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements: Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F), Relative Humidity: 0 to 95%

MX418/S

$228.20

Compare

MX418/S

List Price: ~~$245.00~~

Your Price: $228.20

Vendor Name

MX418/S

Quantity:

Shure

Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive.
Gooseneck Microphones:
- 18" Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

Frequency Response (Figure 1): 50 to 17,000 Hz
Output Impedance (at 1000 Hz): Rated at 150 Omega (180 Omega actual)
Sensitivity (At 1,000 Hz, open circuit voltage*): Supercardioid: -33.5 dBV/Pa (21.1 mV), (All values -12 dB at 0 gain, *1 Pascal = 94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kO load): Supercardioid: 122.7 dB, (All settings +6 dB at 0 gain)
Equivalent Output Noise (A-weighted): Supercardioid: 26.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL): Supercardioid: 67.5 dB
Dynamic Range at 1 kOmega Load: 96.2 dB, (100 dB at 0 gain)
Common Mode Rejection: 45.0 dB minimum
Mute Switch Attenuation (switched models only): 50.0 dB minimum
Preamplifier Output Clipping Level (1% THD): –6.0 dBV (0.5 V), (–12 dB at 0 gain)
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements: Operating Temperature Range: –18° C to 57° C (0° F to 135° F), Relative Humidity: 0 to 95%

MX405R/N

$231.00

Compare

MX405R/N

List Price: ~~$247.00~~

Your Price: $231.00

Vendor Name

MX405R/N

Quantity:

Shure

MX405R/N

5" Shock-Mounted Miniature Gooseneck Microphone, No Capsule, with LED Ring, Includes Shock-Mount/Preamplifier

Flexible in more ways than one, Microflex Miniature Gooseneck microphones deliver unsurpassed style and performance for conference rooms and similar applications. Offering desktop or mounted bases, wired or wireless options, and even interchangeable cartridges, it's easy to get the perfect fit for your conferencing installation. Fully compatible with SLX wireless systems.

Features:

Available in 5 inch (127 mm) and 10 inch (254 mm) lengths
Cardioid and SuperCardioid Polar Patterns
Bi-color status indicator or single color light ring
Programmable Mute switch (desktop models only)
Logic Input/Output for remote LED and Mute control
Surface-mount and wired or wireless desktop base options
CommShield Technology for improved RF filtering

MX410R/N

$231.00

Compare

MX410R/N

List Price: ~~$247.00~~

Your Price: $231.00

Vendor Name

MX410R/N

Quantity:

Shure

MX410R/N: 10" (25.4 cm), light ring, includes surface mount preamp (no microphone cartridge)

Features:

Available in 5" (12.7 cm), 10" (25.4 cm), and 15" (38.1 cm) lengths
Cardioid and supercardioid polar patterns
Bi-color status indicator or single color light ring
Programmable mute switch (desktop models only)
Logic input/output for remote LED and mute control
Surface-mount and wired or wireless desktop base options
CommShield Technology for improved RF filtering

MX418SE/C

$236.60

Compare

MX418SE/C

List Price: ~~$253.00~~

Your Price: $236.60

Vendor Name

MX418SE/C

Quantity:

Shure

Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive.
Gooseneck Microphones:
- 18" In-Line Preamp, Shock & Flange Mount, 10' Side- (or Bottom-) Exit Cable, Snap-Fit Foam Windscreen
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

Frequency Response (Figure 1): 50 to 17,000 Hz
Output Impedance (at 1000 Hz): Rated at 150 Omega (180 Omega actual)
Sensitivity (At 1,000 Hz, open circuit voltage): Cardioid: -35.0 dBV/Pa (17.8 mV), (All values -12 dB at 0 gain, *1 Pascal = 94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kO load): Cardioid: 124.2 dB, (All settings +6 dB at 0 gain)
Equivalent Output Noise (A-weighted): Cardioid: 28.0 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL): Cardioid: 66.0 dB
Dynamic Range at 1 kOmega Load: 96.2 dB, (100 dB at 0 gain)
Common Mode Rejection: 45.0 dB minimum
Mute Switch Attenuation (switched models only): 50.0 dB minimum
Preamplifier Output Clipping Level (1% THD): –6.0 dBV (0.5 V), (–12 dB at 0 gain)
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements: Operating Temperature Range: –18° C to 57° C (0° F to 135° F), Relative Humidity: 0 to 95%

MX412SE/C

$236.60

Compare

MX412SE/C

List Price: ~~$253.00~~

Your Price: $236.60

Vendor Name

MX412SE/C

Quantity:

Shure

Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive.
Gooseneck Microphones:
- 12" In-Line Preamp, Shock & Flange Mount, 10' Side- (or Bottom-) Exit Cable, Snap-Fit Foam Windscreen
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

MX412D/N

$242.20

Compare

MX412D/N

List Price: ~~$346.00~~

Your Price: $242.20

Vendor Name

MX412D/N

Quantity:

Shure

Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive.
Desktop Gooseneck Microphones:
- 12" Desktop Base with 10' Cable, Logic Functions, Programmable Switch, LED Indicator, Snap-Fit Foam Windscreen
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

Frequency Response (Figure 1): 50 to 17,000 Hz
Output Impedance (at 1000 Hz): Rated at 150 Omega (180 Omega actual)
Sensitivity (At 1,000 Hz, open circuit voltage*): Cardioid: -35.0 dBV/Pa (17.8 mV), (All settings –12 dB at 0 gain, *1 Pascal = 94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kO load): Cardioid: 124.2 dB, Supercardioid: -33.5 dBV/Pa (21.1 mV), Omnidirectional: -27.5 dBV/Pa (42.2 mV), (All settings +6 dB at 0 gain)
Equivalent Output Noise (A-weighted): Cardioid: 28.0 dB SPL, Supercardioid: 26.5 dB SPL, Omnidirectional: 20.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL): Cardioid: 66.0 dB, Supercardioid: 67.5 dB, Omnidirectional: 73.5 dB
Dynamic Range at 1 kOmega Load: 96.2 dB, (100 dB at 0 gain)
Common Mode Rejection: 45.0 dB minimum
Mute Switch Attenuation (switched models only): 50.0 dB minimum
Preamplifier Output Clipping Level (1% THD): –6.0 dBV (0.5 V), (–12 dB at 0 gain)
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements: Operating Temperature Range: –18° C to 57° C (0° F to 135° F), Relative Humidity: 0 to 95%

MX418D/N

$242.20

Compare

MX418D/N

List Price: ~~$346.00~~

Your Price: $242.20

Vendor Name

MX418D/N

Quantity:

Shure

Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive.
Gooseneck Microphones:
- 18" Desktop Base with 10' Cable, Logic Functions, Programmable Switch, LED Indicator, Snap-Fit Foam Windscreen
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

Frequency Response (Figure 1): 50 to 17,000 Hz
Output Impedance (at 1000 Hz): Rated at 150 Omega (180 Omega actual)
Sensitivity (At 1,000 Hz, open circuit voltage): Cardioid: -35.0 dBV/Pa (17.8 mV), Supercardioid: -33.5 dBV/Pa (21.1 mV) , Omnidirectional: -27.5 dBV/Pa (42.2 mV), (All values -12 dB at 0 gain, *1 Pascal = 94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kO load): Cardioid: 124.2 dB, Supercardioid: 122.7 dB, Omnidirectional: 116.7 dB, (All settings +6 dB at 0 gain)
Equivalent Output Noise (A-weighted): Cardioid: 28.0 dB SPL, Supercardioid: 26.5 dB SPL, Omnidirectional: 20.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL): Cardioid: 66.0 dB, Supercardioid: 67.5 dB, Omnidirectional: 73.5 dB
Dynamic Range at 1 kOmega Load: 96.2 dB, (100 dB at 0 gain)
Common Mode Rejection: 45.0 dB minimum
Mute Switch Attenuation (switched models only): 50.0 dB minimum
Preamplifier Output Clipping Level (1% THD): –6.0 dBV (0.5 V), (–12 dB at 0 gain)
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements: Operating Temperature Range: –18° C to 57° C (0° F to 135° F), Relative Humidity: 0 to 95%

MX418SE/S

$243.60

Compare

MX418SE/S

List Price: ~~$261.00~~

Your Price: $243.60

Vendor Name

MX418SE/S

Quantity:

Shure

Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive.
Gooseneck Microphones:
- 18" In-Line Preamp, Shock & Flange Mount, 10' Side- (or Bottom-) Exit Cable, Snap-Fit Foam Windscreen
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

Frequency Response (Figure 1): 50 to 17,000 Hz
Output Impedance (at 1000 Hz): Rated at 150 Omega (180 Omega actual)
Sensitivity (At 1,000 Hz, open circuit voltage): Supercardioid: -33.5 dBV/Pa (21.1 mV), (All values -12 dB at 0 gain, *1 Pascal = 94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kO load): Supercardioid: 122.7 dB, (All settings +6 dB at 0 gain)
Equivalent Output Noise (A-weighted): Supercardioid: 26.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL): Supercardioid: 67.5 dB
Dynamic Range at 1 kOmega Load: 96.2 dB, (100 dB at 0 gain)
Common Mode Rejection: 45.0 dB minimum
Mute Switch Attenuation (switched models only): 50.0 dB minimum
Preamplifier Output Clipping Level (1% THD): –6.0 dBV (0.5 V), (–12 dB at 0 gain)
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements: Operating Temperature Range: –18° C to 57° C (0° F to 135° F), Relative Humidity: 0 to 95%

MX412S/C

$243.60

Compare

MX412S/C

List Price: ~~$261.00~~

Your Price: $243.60

Vendor Name

MX412S/C

Quantity:

Shure

Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive.
Gooseneck Microphones:
- 12" Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen, Mute Switch, LED Indicator
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

Frequency Response (Figure 1): 50 to 17,000 Hz
Output Impedance (at 1000 Hz): Rated at 150 Omega (180 Omega actual)
Sensitivity (At 1,000 Hz, open circuit voltage*): Cardioid: -35.0 dBV/Pa (17.8 mV), (All values -12 dB at 0 gain, *1 Pascal = 94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kO load): Cardioid: 124.2 dB, (All settings +6 dB at 0 gain)
Equivalent Output Noise (A-weighted): Cardioid: 28.0 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL): Cardioid: 66.0 dB
Dynamic Range at 1 kOmega Load: 96.2 dB, (100 dB at 0 gain)
Common Mode Rejection: 45.0 dB minimum
Mute Switch Attenuation (switched models only): 50.0 dB minimum
Preamplifier Output Clipping Level (1% THD): –6.0 dBV (0.5 V), (–12 dB at 0 gain)
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements: Operating Temperature Range: –18° C to 57° C (0° F to 135° F), Relative Humidity: 0 to 95%

MX418S/C

$243.60

Compare

MX418S/C

List Price: ~~$261.00~~

Your Price: $243.60

Vendor Name

MX418S/C

Quantity:

Shure

Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive.
Gooseneck Microphones:
- 18" Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen, Mute Switch, LED Indicator
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

Frequency Response (Figure 1): 50 to 17,000 Hz
Output Impedance (at 1000 Hz): Rated at 150 Omega (180 Omega actual)
Sensitivity (At 1,000 Hz, open circuit voltage): Cardioid: -35.0 dBV/Pa (17.8 mV), (All values -12 dB at 0 gain, *1 Pascal = 94 dB SPL)
Maximum SPL (1 kHz at 1% THD, 1 kO load): Cardioid: 124.2 dB, (All settings +6 dB at 0 gain)
Equivalent Output Noise (A-weighted): Cardioid: 28.0 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL): Cardioid: 66.0 dB
Dynamic Range at 1 kOmega Load: 96.2 dB, (100 dB at 0 gain)
Common Mode Rejection: 45.0 dB minimum
Mute Switch Attenuation (switched models only): 50.0 dB minimum
Preamplifier Output Clipping Level (1% THD): –6.0 dBV (0.5 V), (–12 dB at 0 gain)
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements: Operating Temperature Range: –18° C to 57° C (0° F to 135° F), Relative Humidity: 0 to 95%

MX412SE/S

$243.60

Compare

MX412SE/S

List Price: ~~$261.00~~

Your Price: $243.60

Vendor Name

MX412SE/S

Quantity:

Shure

Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive.
Gooseneck Microphones:
- 12" In-Line Preamp, Shock & Flange Mount, 10' Side- (or Bottom-) Exit Cable, Snap-Fit Foam Windscreen
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

MX415RLP/N

$243.85

Compare

MX415RLP/N

List Price: ~~$244.00~~

Your Price: $243.85

Vendor Name

MX415RLP/N

Quantity:

Shure

Microflex Modular Gooseneck Microphones

Condenser: Lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances. Powered by battery or phantom power supply.

Microflex Modular Gooseneck microphones deliver unsurpassed style, flexibility and performance for conference rooms and similar applications. Offering desktop or mounted bases, wired or wireless options, and even interchangeable cartridges, it’s easy to get the perfect fit for your conferencing installation. Fully compatible with SLX Wireless Systems when used with MX890 Wireless Desktop Base.

Available Options: MX415RLP/N 15" (38.1 cm) gooseneck, less preamp, light ring (no microphone cartridge)

Features:

Available in 5" (12.7 cm), 10" (25.4 cm), and 15" (38.1 cm) lengths
Cardioid and supercardioid polar patterns
Bi-color status indicator or single color light ring
Programmable mute switch (desktop models only)
Logic input/output for remote LED and mute control
Surface-mount and wired or wireless desktop base options
CommShield Technology for improved RF filtering

Type: Condenser (electret bias)
Frequency Response: 50 to 17000 Hz
Polar Pattern: MX415/C: Cardioid
Output Impedance: EIA Rated at 150 Ohms (170 Ohms actual)
Output Configuration: Active balanced
Dynamic Range (1 kilohm load at 1 kHz): 3 dB
Common Mode Rejection (10 Hz to 100 kHz): 45 dB minimum
Preamplifier Output Clipping Level (1% THD): -8 dBV (0.4 V)
Polarity: 3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
5-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector
Net Weight: MX415: .154 lbs (.07kg)
Logic Connections: LED IN: Active low (=1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V, LOGIC OUT: Active low (=1.0V), syncs up to 20mA, TTL compatible, Absolute maximum voltage: -0.7V to 50V (up to 50V through 3 kilohms)
Mute Switch Attenuation: -50 dB minimum
Cable: MX400DP: 20 ft (6.1 m) attached cable with shielded audio pair terminated at a 3-pin male XLR and three unterminated conductors for logic control
Environmental Conditions:
Operating Temperature: -18 to 57 deg. C (0 to 135 deg. F)
Storage Temperature: -29 to 74 deg. C (-20 to 165 deg. F)
Relative Humidity: 0 to 95%
Power Requirements: 48 to 52 Vdc phantom, 8.0 mA

MX415LP/S

$244.00

Compare

MX415LP/S

List Price: ~~$244.00~~

Your Price: $244.00

Vendor Name

MX415LP/S

Quantity:

Shure

Microflex Modular Gooseneck Microphones

Condenser: Lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances. Powered by battery or phantom power supply.

Microflex Modular Gooseneck microphones deliver unsurpassed style, flexibility and performance for conference rooms and similar applications. Offering desktop or mounted bases, wired or wireless options, and even interchangeable cartridges, it’s easy to get the perfect fit for your conferencing installation. Fully compatible with SLX Wireless Systems when used with MX890 Wireless Desktop Base.

Available Options: MX415LP/S 15" (38.1 cm) gooseneck, less preamp, bi-color status indicator (cardioid or supercardioid polar pattern)

Features:

Available in 5" (12.7 cm), 10" (25.4 cm), and 15" (38.1 cm) lengths
Cardioid and supercardioid polar patterns
Bi-color status indicator or single color light ring
Programmable mute switch (desktop models only)
Logic input/output for remote LED and mute control
Surface-mount and wired or wireless desktop base options
CommShield Technology for improved RF filtering

Type: Condenser (electret bias)
Frequency Response: 50 to 17000 Hz
Polar Pattern: MX415/C: Cardioid
Output Impedance: EIA Rated at 150 Ohms (170 Ohms actual)
Output Configuration: Active balanced
Sensitivity (at 1 kHz , open circuit voltage): Supercardioid: -34 dBV/Pa (21 mV) , 1 Pascal=94 dB SPL
Maximum SPL (1 kHz at 1% THD, 1 kilohm load): Supercardioid: 120 dB
Equivalent Output Noise (A-weighted): Supercardioid: 27 dB SPL
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): Supercardioid: 68 dB
Dynamic Range (1 kilohm load at 1 kHz): 3 dB
Common Mode Rejection (10 Hz to 100 kHz): 45 dB minimum
Preamplifier Output Clipping Level (1% THD): -8 dBV (0.4 V)
Polarity: 3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
5-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector
Net Weight: MX415: .154 lbs (.07kg)
Logic Connections: LED IN: Active low (=1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V, LOGIC OUT: Active low (=1.0V), syncs up to 20mA, TTL compatible, Absolute maximum voltage: -0.7V to 50V (up to 50V through 3 kilohms)
Mute Switch Attenuation: -50 dB minimum
Cable: MX400DP: 20 ft (6.1 m) attached cable with shielded audio pair terminated at a 3-pin male XLR and three unterminated conductors for logic control
Environmental Conditions:
Operating Temperature: -18 to 57 deg. C (0 to 135 deg. F)
Storage Temperature: -29 to 74 deg. C (-20 to 165 deg. F)
Relative Humidity: 0 to 95%
Power Requirements: 48 to 52 Vdc phantom, 8.0 mA

MX418S/S

$250.60

Compare

MX418S/S

List Price: ~~$269.00~~

Your Price: $250.60

Vendor Name

MX418S/S

Quantity:

Shure

Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive.
Gooseneck Microphones:
- 18" Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen, Mute Switch, LED Indicator
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

MX412S/S

$250.60

Compare

MX412S/S

List Price: ~~$269.00~~

Your Price: $250.60

Vendor Name

MX412S/S

Quantity:

Shure

Available with a variety of heights and mounting styles to choose from. The S/C, S/S, and S/N models include a silent mute switch with LED indicator, a Shure Microflex exclusive.
Gooseneck Microphones:
- 12" Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen, Mute Switch, LED Indicator
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs
Shock mount provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
Snap-fit foam windscreen
Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)