Pro Audio & Lighting, Pro Audio, Pro Lighting, DJ Equipment, DJ Gear, Karaoke, Cases, Computer, Studio, Instruments, Percussion, Uplighting, up lighting, Custom Gobos, Gobos, wedding gobo, gobo, stock gobos, stock gobo, wedding gear
TWO WAYS TO SAVE
WARREN, MI
(586) 582-0871
ONLINE SALES
(800) 357-8991
Welcome Guest
LiveZilla Live Help

Recently Viewed Categories

Direct Boxes

Sort By: Name | Price

DB-1_Thumb.jpg

DB-1
$16.99
Compare
Nady

DB-1

Passive direct box

Features:

  • Enables connection of any unbalanced audio source signal (such as an electric instrument, keyboard, or amp speaker output) to any mic level balanced input (such as a mixer)
  • Parallel Output allows simultaneous connection to two separate inputs (e.g., to an amp and mixer)
  • Translates high-impedance instrument outputs into low-impedance balanced signals, or balanced low-impedance signals into unbalanced outputs
  • Converts unbalanced +10dB DJ mixer signals to balanced mic level signals, enabling easier interfacing with consoles and longer cable runs
  • Eliminates need for a direct box on multiple keyboard setups plugged into an instrument amp — input directly to a console mixer by connecting the speaker outputs of the amp to the console input through the DB-1
  • 3-position input attenuation switch (0dB, -20dB, -40dB) facilitates proper output signal levels for optimum level matching to connected equipment
  • Switchable ground lift eliminates ground loop hum problems
  • Rugged, roadworthy all-steel construction for years of reliability
  • 0.9 lbs (.453 kg)

DI400P_Thumb.jpg

DI400P
$19.99
Compare
Behringer
High-Performance Passive DI-Box

The ULTRA-DI DI400P is a passive DI (Direct Injection) box for connecting a guitar, bass or keyboard directly to your mixer. With the DI400P as your go-between, impedance-matching problems become a thing of the past, and long cable runs will not sacrifice all of your precious tone.

Directly to the Point
With its parallel 1/4" IN and OUT jacks, the DI400P allows you to plug in your instrument and send the same signal to your onstage amplifier, while the XLR OUTPUT sends a balanced signal to your mixer. A ground lift switch eliminates hum associated with ground loops and our high-performance transformer provides the ultimate in signal integrity.

Great Sound, Exceptional Value
The ULTRA-DI DI400P is also ultra-compact and we house it in a tough, road-ready metal case. This means the DI box will give you great sound gig after gig, session after session. And thanks to its low price, you can afford to outfit the entire band. See for yourself at your nearest BEHRINGER dealer.

Features:
  • Professional and multi-purpose direct injection box for stage and studio applications
  • Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers
  • Ultra-flat frequency response due to renowned BEHRINGER OT-2 transformer
  • Allows direct connection to speaker outputs with up to 3,000 Watts
  • Ground Lift switch eliminates typical ground loop problems
  • Thru/Out jack lets you send the unbalanced signal to an onstage amplifier while the balanced signal is routed to the mixer
  • ¼“ TRS and gold-plated XLR connectors
  • Ultra-rugged, road-suitable metal case
  • High-quality components and exceptionally rugged construction ensure long life and durability
  • Conceived and designed by BEHRINGER Germany
DIB-443_Thumb.jpg

DIB-443
$19.99
Compare
Hosa
DIB-443

Sidekick Passive DI Box, 1/4 in TS to XLR3M

The Sidekick Passive DI Box by Hosa Technology makes it easy to connect your guitar, bass, or keyboard directly to a mixing console! It features an isolation transformer that transforms an instrument-level signal to a line-level signal.

It works with each of the following:
  • Electric guitars, basses, and keyboards
  • Pedal effects and effects processors
  • Any electronic musical instrument with a mono phone output
Use the Sidekick to “go direct” for a pure, clean, noise-free tone that is perfect for Digital Signal Processing (DSP) or throw the INST/SPKR switch to SPKR position to allow your amp to drive the line for a natural, overdriven tone. Either way, it's your sound - all of it!
DB-2_Thumb.jpg

DB-2
$19.99
Compare
Nady

DB-2

Dual passive direct box

The DB-2 Dual Channel Direct Box is one of the most useful, versatile tools available — indispensable for easy interfacing and connection between various audio gear in numerous applications.

Features:

  • Dual channels allow the connection of any two unbalanced audio source signals (e.g., electric instruments, keyboards, unbalanced mics, stereo outputs, even amp speaker outputs) to any two mic or line level balanced inputs (e.g., mixer)
  • Two paralleled input/output jacks per channel allow simultaneous connection to two separate inputs per channel or the ability to break into the signal path between instruments and amplifiers, or amps and speakers, by using one jack as the input and the other as the output
  • Converts unbalanced DJ mixer signals to balanced mic or line level signals; enables simpler interface with consoles and longer cable runs
  • Facilitates multiple keyboard setups plugged into both instrument amp and house console mixer
  • Each channel’s 3–position input attenuation switch (0dB, -20dB, -40dB) facilitates proper output signal levels for optimal level matching
  • Features Stereo/Mono switch for splitting signal input to both balanced XLR outs
  • Switchable ground lift eliminates hum problems
  • Rugged, roadworthy all-steel construction for superb reliability

DB25b-Direct-Box_Thumb.jpg

DB25b Direct Box
$24.99
Compare
Rolls
DB25b Direct Box

The DB25b is a transformer balanced, passive direct box. It features a Ground Lift switch for hum elimination, and an Attenuator control for padding the input signal from -20dB to -infinity dB. Padding the input signal provides a way to connect the DB25b to a line level signal, even a speaker level signal and connecting it to a balanced line or Mic input on a mixer. The two 1/4 inch; inputs are paralleled pass-throughs to also send the input signal to a tuner, pre amp, etc..

Features:
  • Mounting Tabs make it easy to attach to any surface
  • Attenuator knob to dial in the exact level you want
  • Controls only on the front and back for "brick wall" multiples
  • Basic black color for matching any decor
DI20_Thumb.jpg

DI20
$24.99
Compare
Behringer
Professional Active 2-Channel DI-Box/Splitter

The ULTRA-DI DI20 is a one-of-a-kind DI (direct injection) box that can convert up to two separate unbalanced 1/4" TRS lines into two balanced XLR outputs, or function as a signal splitter. Electric guitarists, keyboardists and bassists will love the flexibility this incredible box provides.

Mono, Stereo or Double the Amps
By flipping a switch, you can use the DI20 as a launching pad for two separate mono signals, a stereo signal, or a split-signal feeding two separate amps. The DI20 also features a ground lift switch and the 3-position input attenuator can accommodate input levels of up to +48 dBu. This handy built-in attenuator allows you to connect to your amplifier’s speaker outputs, even amps rated as high as 3,000 Watts. You can power the DI20 with either a 9 V battery or your mixer’s phantom power supply (+18 to +48 V DC). The whole package is wrapped in an ultra compact, road-suitable and rugged metal housing.

Be Direct
If you're a working musician who demands uncompromising functionality and durability, the ULTRA-DI DI20 will astound you—and so will its very affordable price tag. See what the DI20 can do for your sound today at your nearest BEHRINGER dealer.

Features:
  • Professional and multi-purpose direct injection box for stage and studio applications
  • Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers
  • Converts 2 independent unbalanced 1/4'' TRS line inputs into 2 balanced XLR outputs
  • Additional Split mode (channel 1 assigns signal to both XLR outputs)
  • Ultra-flat frequency response due to servo-balanced operation
  • Internal battery automatically shuts off when phantom power is applied
  • Allows direct connection to speaker outputs with up to 3,000 Watts
  • Ground Lift switch eliminates typical ground loop problems
  • Input 2 usable as channel 1 Link output (additional to XLR output)
  • ¼“ TRS and gold-plated XLR connectors
  • Ultra-rugged, road-suitable metal case
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany
ZDIRECT_Thumb.jpg

ZDIRECT
$25.00
Compare
ART
ZDIRECT

Professional Passive Direct Box


The Zdirect is a high quality totally passive interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input thru a high performance audio isolation transformer. The high impedance single-ended 1/4" input is converted by the transformer into an isolated balanced low impedance signal source. The Zdirects audio transformer has an extremely flat and wide frequency response and can handle high signal levels while still maintaining an isolated balanced low impedance output. This gives the Zdirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.

The Input Attenuator switches allow for a wide range of signal levels and the Input Thru jack allows for tapping off of your signal chain. The Ground Lift switch lets you totally separate the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing hum and ground-loop noise.

What further sets the Zdirect apart from other "DI" boxes are its extended features and versatility. We have added a switchable low pass Filter that cuts out all very high frequency interference. This Bessel filter on the output is placed out of the audio range and is primarily intended to reduce radio frequency interference before it gets into the main system. The filter is also very effective in reducing any digital computer noise artifacts when using the Zdirect as an interface between a computer based audio workstation and your monitors. The Phase Invert switch, while not normally included with your run of the mill D.I. box, has been added to allow you to switch signal polarity right at the source. This feature is especially handy when you are combining a direct tap with a microphone feed in the mix.

The compact black anodized all aluminum case and it's passive design allow the Zdirect to provide years of trouble free service in Live Sound, Permanent/Fixed Install, D.J., and virtually any PA application. It's full feature set, rugged construction, and high-end specifications make the Zdirect the obvious choice.
DB500_Thumb.jpg

DB500
$29.95
Compare
On Stage
DB500

Converts any high-impedance ¼" source into a low-impedance (XLR) signal. Passive design features a high quality transformer and ground lift switch in a rugged metal casing.
The DB500 Direct Box transforms any high-impedance 1/4" source into a low-impedance (XLR) signal ready to be sent long distances to a mixing board or recording console. Its passive design features a high quality transformer, ground lift switch, and does not require batteries or phantom power. Perfect for bass/acoustic guitar, keyboards, and DJ equipment.
ADI-1_Thumb.jpg

ADI-1
$29.99
Compare
Nady
ADI-1

Active DI (direct inject) box

Features:
  • Eliminates impedance mismatch problems and converts any sound source at almost any level into a clean, noise-free balanced signal
  • Full-featured controls and connections include On/Off, Ground Lift, and Guitar/Speaker source select input attenuation switches
  • Unbalanced ¼” TS input and Parallel Link Output jacks
  • Servo-balanced XLR output jack
  • Parallel link output allows ultimate hookup flexibility by enabling applications such as connection to the input of the backline or monitor amplifier
  • Portable aircraft aluminum extruded case for ultimate roadworthiness, long life and reliability
  • Powered either by consoles +48V phantom power or internal 9V battery
DI600P_Thumb.jpg

DI600P
$29.99
Compare
Behringer
High-Performance Passive DI-Box

The ULTRA-DI DI600P is a passive DI (Direct Injection) box for connecting a guitar, bass or keyboard directly to your mixer. With the DI600P as your go-between, impedance-matching problems become a thing of the past, and long cable runs will not sacrifice all of your precious tone.

Directly to the Point
With its parallel 1/4" IN and OUT jacks, the DI600P allows you to plug in your instrument and send the same signal to your onstage amplifier, while the XLR OUTPUT sends a balanced signal to your mixer. A ground lift switch eliminates hum associated with ground loops and our high-performance transformer provides the ultimate in signal integrity.

Special Feature
Just flip the INST/AMP switch and the DI600P can easily accommodate either the low-level signal of a high-impedance mic or guitar (INST mode), or the speaker output of a guitar amplifier (AMP mode). Even if your amp cranks out as much as 3,000 Watts, you get a perfect signal every time!

Great Sound, Exceptional Value
The ULTRA-DI DI600P is also ultra-compact, and we house it in a tough, road-ready metal case. This means the DI box will give you great sound gig after gig, session after session. And thanks to its low price, you can afford to outfit the entire band. See for yourself at your nearest BEHRINGER dealer.

Features:
  • Professional and multi-purpose direct injection box for stage and studio applications
  • Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers
  • Ultra-flat frequency response due to renowned BEHRINGER OT-2 transformer
  • Allows direct connection to speaker outputs with up to 3,000 Watts
  • Ground Lift switch eliminates typical ground loop problems
  • Filter switch reduces annoying hiss and buzz
  • Thru/Out jack lets you send the unbalanced signal to an onstage amplifier while the balanced signal is routed to the mixer
  • ¼“ TRS and gold-plated XLR connectors
  • Ultra-rugged, road-suitable metal case
  • High-quality components and exceptionally rugged construction ensure long life and durability
  • Conceived and designed by BEHRINGER Germany
GI100_Thumb.jpg

GI100
$39.99
Compare
Behringer
Professional Battery/Phantom Powered DI-Box with Guitar Speaker Emulation

Whether you're recording or on stage, you need a great DI (direct injection) box to get your guitar sound to the console with full dynamics and power—and free of noise. The ULTRA-G GI100 active DI box gives you all the full-rock glory of a cranked 4x12 cabinet—at a fraction of the weight and floor space.

Portable Rock Power
The GI100 works like a standard DI box. You can use it to tap into your amplifier's speaker outputs, even high-powered rigs with ratings of up to 3,000 Watts. Or, just plug your guitar directly into the GI100, switch on the unbelievably realistic 4x12 cabinet simulation designed by renowned engineer Juergen Rath, and you've got rock royalty-sized tone in a package the size of a cheeseburger! You may never mic your speakers again!

Ready for Action
The DI100 sounds amazing, and it comes equipped to meet the most common needs of gigging and recording, as well as the travel in between. There's a ground lift switch that eliminates typical ground loop problems, and when phantom power is connected, this DI box automatically shuts off the internal battery. The DI100 is housed in cool-looking red aluminum and features stackable, oversized rubber corners.

Direct Perfection
The DI100 goes way beyond the typical abilities of a DI box to give you the sound and performance you’d expect from a super-charged vintage half-stack, plus enough power to have your audience wondering where you hid the amp. And no need to worry, you can definitely afford it, with money left over for strings and things! Drop by your nearest BEHRINGER dealer and introduce your axe to the guitar-loving DI100.

Features:
  • Professional and multi-purpose direct injection box for stage and studio applications
  • Authentic 4 x 12" speaker emulation by renowned amp designer Jurgen Rath
  • Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers
  • Ultra-flat frequency response due to renowned BEHRINGER OT-1 transformer
  • Internal battery automatically shuts off when phantom power is applied
  • Allows direct connection to speaker outputs with up to 3,000 Watts
  • Switchable input attenuation allows input levels of up to +50 dB
  • Ground Lift switch eliminates typical ground loop problems
  • ¼“ TRS and gold-plated XLR connectors
  • Ultra-rugged, road-suitable aluminum case
  • Stackable oversized rubber corners
  • High-quality components and exceptionally rugged construction ensure long life and durability
  • Conceived and designed by BEHRINGER Germany
DI100_Thumb.jpg

DI100
$39.99
Compare
Behringer
Professional Battery/Phantom Powered DI-Box

With the DI100, you can rest assured that your sound source will reach the console balanced and noise-free. BEHRINGER's take on the all-important active DI box gives you functionality, durability and incredible sound at a remarkable price.

Be Direct
Plug into the DI100's balanced 1/4" TRS or XLR input, then send a signal to your console via the balanced XLR output. You can even plug your guitar or bass amp's speaker output into the DI100, which can handle ratings of up to 3,000 Watts and still deliver a perfect signal. It also features a 1/4" LINK jack to send your signal to an on-stage amplifier. The DI100 also has a switchable attenuation pad, allowing input levels of up to +50 dB. There is also a ground lift switch to eliminate noise associated with ground loops. The DI100 also features BEHRINGER's renowned OT-1 output transformer.

Superior Sound, Incredible Value
DI boxes are an essential part of any stage or studio, and the DI100 delivers the exceptional sound you expect, wrapped up in a rugged, road-proof aluminum case with stackable rubber corners. Find out how the ultra-affordable DI100 can improve your sound at your nearest BEHRINGER dealer.

Features:
  • Professional and multi-purpose direct injection box for stage and studio applications
  • Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers
  • Ultra-flat frequency response due to renowned BEHRINGER OT-1 transformer
  • Internal battery automatically shuts off when phantom power is applied
  • Allows direct connection to speaker outputs with up to 3,000 Watts
  • Switchable input attenuation allows input levels of up to +50 dB
  • Ground Lift switch eliminates typical ground loop problems
  • ¼" TRS and gold-plated XLR connectors
  • Ultra-rugged, road-suitable aluminum case
  • Stackable oversized rubber corners
  • High-quality components and exceptionally rugged construction ensure long life and durability
  • Conceived and designed by BEHRINGER Germany
DUALZDIRECT_Thumb.jpg

DUALZDIRECT
$40.00
Compare
ART
DUALZDIRECT

Dual Professional Passive Direct Box


The DUALZDirect provides two independent high quality totally passive interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs through high performance audio isolation transformers. Each of the high impedance single-ended 1/4" inputs is converted by a transformer into an isolated, balanced, low impedance signal output. The DUALZDirect's audio transformers have an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALZDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.

The input ATTENUATOR switches allow for a wide range of signal levels and the input THRU jacks allows for tapping off of your signal chain. The GROUND LIFT switches let you totally separate the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing hum and ground-loop noise.

What further sets the DUALZDirect apart from other "DI" boxes are its extended features and versatility. We have added switchable low pass FILTERs that cut out all very high frequency interference. These Bessel filters on the outputs are placed out of the audio range and are primarily intended to reduce radio frequency interference before it gets into the main system. The filters are also very effective in reducing any digital computer noise artifacts when using the DUALZDirect as an interface between a computer-based audio workstation and your monitors. The PHASE INVERT switches, while not normally included with your "run of the mill" DI box, have been added to allow you to switch signal polarity right at the source. This feature is especially handy when you are combining a direct tap with a microphone feed in the mix.

The compact black-anodized all aluminum case and it's passive design allow the DUALZDirect to provide years of trouble free service in Live Sound, Permanent/Fixed Install, D.J., and virtually any PA application. It's full feature set, rugged construction, and high-end specifications make the DUALZDirect the obvious choice.

Features:
  • Fully passive, high performance transformer design. No battery required
  • Converts 50k Ohm inputs into 600 Ohm balanced outputs
  • Switchable input attenuation (0, -20, -40 dB)
  • Switchable low pass filter
  • Switchable phase invert
  • Switchable ground lift (fully isolates inputs from chassis and outputs)
  • XLR connectors for balanced outputs
  • Rugged extruded aluminum case
ADB2-Active-Direct-Box_Thumb.jpg

ADB2 Active Direct Box
$42.99
Compare
Rolls
ADB2 Active Direct Box

The ADB2 is powered by standard microphone phantom power from 9-48 VDC and uses a discrete low-noise differential driver to make it very quiet. The ADB2 has two 1/4" Input jacks wired in parallel, a male XLR Output and a 3 position attenuator and ground lift switches.

Features:
  • Input: -10 to +40 dB unbal
DPDB_Thumb.jpg

DPDB
$48.00
Compare
ART
DPDB

Dual Passive Direct Box


The new DPDB Passive Direct Box features two high-quality direct boxes in one portable enclosure. It is a rock solid, roadworthy DI for connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced inputs. It also allows connection of a music source to an instrument amplifier while simultaneously patching it to a mixer.

The DPDB features switchable Input Attenuation (0 dB, -20dB, -40dB), a 50k Ohm Instrument Input, 50k Ohm Parallel Link jack, a 600 Ohm XLR Output Jack, and a switchable Ground Lift.

The DPDB excels at impedance matching and improving the sound of any instrument plugged into it.

The ART DPDB is a must-have in any audio tool kit. Enclosed in a rugged steel chassis, it is designed and manufactured to the highest standards to provide years of quiet, reliable performance.

DPDB Applications:

  • Electric guitar and bass pick up output signals - The high impedance signal from a guitar or bass guitar pickup is translated by the dPDB into a low impedance balanced signal required by mixing consoles.
  • Keyboards and line level signals - The dPDB automatically balances and matches the line level outputs of modern electronic keyboards. If you are using a multiple keyboard setup and your keyboards are all plugged into a single instrument amplifier, the dPDB can be used to replace individual direct boxes. Simply send the output of the instrument amplifier to the dPDB and then to the console (instead of a separate DI box for each keyboard).
  • DJ console output signals - DJ mixers often supply only an unbalanced -10dB signal. The dPDB converts this signal to a balanced line level signal before it reaches the console, while providing a convenient method of connector transition with the capability to run long cables.
  • Speaker level signals - The dPDB's ability to accept speaker level inputs from a power amplifier's output allows post-amplifier, post eq and effects signals to be fed directly to the console. In this manner, a particular effect or amplifier sound can be sent directly to the mix.

ADI-2_Thumb.jpg

ADI-2
$49.99
Compare
Nady
ADI-2

Dual active DI (direct inject) box

Features:
  • Eliminates impedance mismatch problems and converts any sound source at almost any level into a clean, noise-free balanced signal
  • Full-featured controls and connections include On/Off, Ground Lift, and Guitar/Speaker source select input attenuation switches
  • Unbalanced ¼” TS input and Parallel Link Output jacks
  • Servo-balanced XLR output jack
  • Parallel link output allows ultimate hookup flexibility by enabling applications such as connection to the input of the backline or monitor amplifier
  • Portable aircraft aluminum extruded case for ultimate roadworthiness, long life and reliability
  • Powered either by consoles +48V phantom power or internal 9V battery
DUALXDIRECT_Thumb.jpg

DUALXDIRECT
$55.00
Compare
ART
DUALXDIRECT

Dual Professsional Active Direct Box


The DUALXDirect provides two independent high quality active interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs. Each of the high impedance 1/4" and XLR inputs (provided via "combo" jacks) are buffered and converted by very low noise active electronics into an isolated, balanced, low impedance signal output. The DUALXDirect has an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALXDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.

The input ATTENUATOR switches allow for a wide range of signal levels and the input THRU jacks allow for tapping off of your signal chain. The GROUND LIFT switches let you totally separate the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing hum and ground-loop noise.

The DUALXDirect''s active circuitry is powered by phantom voltage from the OUTPUT connections or by an internal 9V battery, when external power is not available. When powered by a battery, it draws less than 7.5 mA which should provide more than 100 hours of operation with a new battery (alkaline recommended). If phantom power is available, then the DUALXDirect will automatically draw its power from the external source. The POWER ON/OFF switch lights more dimly when the unit is running off of the battery, lights more brightly when it is running off of phantom power, and is off when the unit is inactive.

The compact black-anodized all aluminum case and it's active design allow the DUALXDirect to provide years of trouble free service in Live Sound, Permanent/Fixed Install, D.J., and virtually any PA application. It's full feature set, rugged construction, and high-end specifications make the DUALXDirect the obvious choice.

Features:
  • Fully active design
  • Phantom voltage or 9V battery powered
  • Converts high-impedance balanced / unbalanced inputs into 600 Ohm balanced outputs
  • Switchable input attenuation (0, -30 dB)
  • Switchable ground lift
  • 1/4" TRS / XLR combo connector inputs
  • XLR connectors for balanced outputs
  • Rugged extruded aluminum case
AVDIBOX_Thumb.jpg

AVDIBOX
$56.00
Compare
ART

AVDIBOX

ART Pro Audio AVDIBOX AV Stereo Direct Box

DTI_Thumb.jpg

DTI
$60.00
Compare
ART
DTI

Dual Transformer/Isolator


The DTI (Dual Transformer/Isolater) is a high quality totally passive audio interface that uses a pair of high performance transformers to totally separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise. The DTI's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 Ohms to 100k Ohms.

What further sets the DTI apart from other lesser isolation boxes is its connection versatility. We have provided XLR, 1/4" phone, and RCA type phono connections on all inputs and outputs. This allows it to easily fit into virtually any audio system and be the clean patch point between all types of systems.

Whether you need an interface between a computer based audio workstation and your monitor system, isolation on long cable runs in a fixed installation, isolation of a signal source from your recording equipment, or in many cases, just a safer connection between two audio systems, the DTI can accommodate.

The compact black anodized all aluminum case and it's passive design allow the DTI to provide years of trouble free service in Live Sound, Permanent/Fixed Install, D.J., and virtually any PA application. It's full feature set, rugged construction, and high-end specifications make the DTI the obvious choice.

DB225-Professional-Direct-Box_Thumb.jpg

DB225 ProfessionalDirect Box
$64.99
Compare
Rolls

DB225 ProfessionalDirect Box

The DB225 is a transformer balanced, passive professional direct box. It features a Ground Lift switch for hum elimination, and an Attenuator switch for padding the input signal from -20 or -40dB. Padding the input signal provides a way to connect the DB225 to a line level signal, even a speaker level signal and connecting it to a balanced line or Mic input on a mixer. The two 1/4 inch; inputs are paralleled pass-through to also send the input signal to a tuner, pre amp, etc..

Features:
  • Attenuator switch to select the exact level you want
  • Ground lift switch to help eliminate ground loops
  • Very heavy all metal chassis
  • small compact size
  • MADE IN USA!!! This product will last.
CLEANBOXPRO_Thumb.jpg

CLEANBOXPRO
$65.00
Compare
ART
CLEANBOXPRO

Dual Channel Level Converter


The CLEANBoxPro provides two channels of unbalanced to balanced level conversion and two channels of balanced to unbalanced level conversion in a rugged, compact, and portable unit. Balanced lines offer increased immunity to external electrical noise, such as hum. Since a balanced system minimizes induced noise, it is the preferred method of connecting audio gear, especially when long lengths of cable are used.

One section of the CLEANBoxPro converts two channels of consumer-level unbalanced input signals into two channels of pro line-level balanced output signals. It has two RCA jack inputs and a stereo mini-phone jack input connected in parallel. The balanced output feeds two XLR male jacks.

The other section of the CLEANBoxPro converts two channels of line-level balanced input signals into two channels of consumer unbalanced output signals. It has two XLR female input jacks. The unbalanced output feeds two RCA jacks and a stereo mini-phone jack connected in parallel.

Each section has stereo level controls to optimize signal levels. An LED indicator lights when power is applied.

The CLEANBoxPro can be an invaluable tool in application areas including (but not limited to!): home or professional recording studios, live sound, PA, permanent installs, DJ, AV, consumer HiFi, podcasting and broadcasting. The CLEANBoxPro can be used with: mixers, audio processors, laptop computers, computer sound cards, CD/DVD players, video gaming machines, MP3 player/recorders, powered monitors and digital audio workstations.

Features:
  • XLR connectors for balanced inputs and outputs
  • RCA phono jacks and stereo 1/8" mini-phone jacks for unbalanced inputs and outputs
  • Unbalanced output level control
  • Balanced output level control
  • Rugged extruded aluminum case
  • Lighted On/Off switch
  • Comes with external power supply for operation with AC mains
  • Low noise, low distortion circuitry
DADB_Thumb.jpg

DADB
$65.00
Compare
ART
DADB

Dual Active Direct Box


The ART dADB dual active direct box acts as two independent, high quality active interfaces for connecting instrument, line, or speaker level signals to balanced inputs. The high impedance ¼-inch inputs are buffered and converted by extremely low noise active electronics to deliver isolated, balanced, low impedance outputs.

The dADB delivers an extremely flat and wide frequency response even at high input levels, making it a virtually acoustically transparent DI solution.

Input attenuation on each channel allows for a wide range of source signal levels. Independent parallel thru jacks allow for tapping the signal chains. A Ground Lift on each channel allows for totally separate the input and output signal grounds to isolate two systems when required, thus reducing hum and ground-loop noise.

Switchable low pass Bessel filters eliminate high frequency interference. Operating outside of the audio range these complex and effective filter circuits are primarily intended to eliminate radio frequency interference before it gets into the main system. They also effectively reduce digital computer noise making the dADB the ideal DI solution for laptops, computer workstations and peripherals when used in stereo PA applications.

The dADB's active circuitry is powered by phantom power or by an internal 9V battery when external power is not available. Low current draw (less than 7.5 mA) should provide more than 100 hours of operation with a new battery (alkaline recommended).

The compact black all steel case and active design ensure unmatched long-term reliability in Live Sound, Permanent/Fixed Install, D.J., or virtually any PA application.

Features:
  • Fully Active Design
  • Operates on Phantom Power or 9V Battery
  • Converts High-Impedance Balanced / Unbalanced Inputs Into 600 Ohm Balanced Outputs
  • Switchable Input Attenuation (0, -20, -40 dB)
  • Independently Switchable Low Pass Filter on each Channel
  • Independently Switchable Phase Invert on each Channel
  • Independently Switchable Ground Lift on each Channel
  • ¼-inch TRS Connector Inputs and Thru Connections
  • XLR Connectors for Balanced Outputs
  • Rugged Steel Case
SDI_Thumb.jpg

SDI
$69.99
Compare
Peavey
SDI

Speaker Level Direct Interface

Features:
  • Transformer isolation
  • Adjustable speaker simulation
  • Output level control
  • Balanced mic level output
  • Ground lift switch
  • Weight Unpacked: 0.44 lb(0.2 kg)
  • Weight Packed: 0.44 lb(0.2 kg)
  • Width Packed: 6"(15.24 cm)
  • Height Packed: 9"(22.86 cm)
  • Depth Packed: 2.25"(5.715 cm)

CT1-Cable-Detective_Thumb.jpg

CT1 Cable Detective
$72.00
Compare
Rolls
CT1 Cable Detective

Any Musician or sound person knows how difficult it is to maintain cables. The CT 1 provides an efficient way to detect shorted or open cables. The unit tests 1/4" TS, 1/4" TRS, RCA, XLR and MIDI cables. Plus - it will test combinations of the above. This unit is a MUST-HAVE.
DIB-307A_Thumb.jpg

DIB-307A
$76.99
Compare
Hosa
DIB-307A

Active DI Box, 1/4 in TS to XLR3M

The Hosa Active DI Box utilizes a built-in preamplifier to convert a guitar-level signal to line level, preserving more of a guitar’s tonal character and frequency range than a passive DI box.

Features include:
  • Phantom power operation (when phantom power is present)
  • 9 V battery (power adaptor sold separately)
  • Extruded aluminum chassis
REDBOX_Thumb.jpg

REDBOX
$79.20
Compare
Hughes & Kettner
REDBOX

The guitar DI-Box with tone


Spare the mic and sweeten up the sound
Red Box Classic is the latest version of our industry-standard DI box with speaker simulation. Particularly for live applications, this amazing tool warrants consistent sound quality at every gig and puts an end to crosstalk. Thanks to its clear, direct sound, the Red Box will endear you to every seasoned PA tech – total tonal satisfaction guaranteed. And in the studio, it saves precious time by sparing you the hassles of experimenting with microphone placement. The secret behind many of today’s bestsounding guitar tracks is that they are double-tracked with a microphone and a Red Box Classic. This enables a perfect mix of room ambience and ultra-direct attack. Red Box Classic – the “toneful” way to get the full tone!
dB10_Thumb.jpg

dB10
$79.95
Compare
DBX
dB10

At dbx, when we do something, we do it right. So when we decided to create our new direct injection boxes, we didn’t settle for the same old tired approach to direct box design. With our dbx name on the line, how could we? One look at our new dB10 Passive and dB12 Active direct boxes will tell you that these are clearly different. With their bullet-proof construction, and extraordinary audio performance to rival their looks, finally there’s a direct box worthy of the dbx name.

Utilizing custom dbx mu-metal-shielded audio transformers, high-quality Neutrik® connectors, and low-noise circuitry preserves the sonic integrity and true characteristics of the signal source. Both boxes include a pad switch that accomodates instrument, line and even speaker level signals. Take even more control of your sound by utilizing the polarity invert switch to set the phase relationship between the direct and mic'd sound.

As a professional, you don’t have time for interference, so we’ve included a ground lift switch to solve potential hum and buzz problems due to ground loops. And between the combined shielding of the cast metal chassis and the custom-wound transformer, you can be doubly assured of a clean signal free from interference. All of this sits atop a solid, stable footprint, that will keep the box from being dragged around the stage, and the unique contoured underside allows secure stacking of multiple units.

So whether you need to control the level, placement in the mix, or overall characteristics of 4 independent signals or control the gain leveling on a couple of stereo pairs, the dbx dB10 dB12 is for you.

Features:

  • Premium Performance
  • Rugged Design
  • Stackable Chassis with Durable Rubber Foot
  • Gold-plated Neutrik® XLR Connector
  • Premium Chrome Toggle Switches
  • Hi-Z 1/4" Input Jack
  • Parallel 1/4" Thru Jack
  • Transformer Isolated
  • Premium Shielded Custom dbx Transformer
  • Balanced XLR Lo-Z Output
  • 3-Way 0/20/40 dB Pad Switch
  • Flat/High-Cut Filter Switch
  • Output Polarity Invert Switch
  • Ground Lift Switch
  • 4 Year Warranty!
ADI-C_Thumb.jpg

ADI-C
$79.99
Compare
Peavey
ADI-C

Active Direct Interface with Compressor

Features:
  • Active high-impedance input
  • Soft-knee compressor
  • Soft-knee noise gate
  • Local amplifier output
  • Balanced mic level output
  • Ground lift switch
  • Phantom power or external 15VDC (option)
  • Weight Unpacked: 0.44 lb(0.2 kg)
  • Weight Packed: 0.44 lb(0.2 kg)
  • Width Packed: 6"(15.24 cm)
  • Height Packed: 9"(22.86 cm)
  • Depth Packed: 2.25"(5.715 cm)
ADI-Q_Thumb.jpg

ADI-Q
$79.99
Compare
Peavey
ADI-Q

Active Direct Interface with EQ

Features:
  • Active high-impedance input
  • Bass control (shelving)
  • Mid sweep EQ control
  • High EQ control
  • Local amplifier output
  • Balanced mic level output
  • Ground lift switch
  • Phantom power or external 15VDC (option)
  • Weight Unpacked: 0.62 lb(0.28 kg)
  • Weight Packed: 0.74 lb(0.335 kg)
  • Width Packed: 6"(15.24 cm)
  • Height Packed: 9"(22.86 cm)
  • Depth Packed: 2.875"(7.3025 cm)

ISO-1_Thumb.jpg

ISO-1
$79.99
Compare
Peavey
ISO-1

Transformer Interface

Features:
  • Great low frequency response at high levels
  • Low THD
  • XLR and TRS inputs
  • XLR and TRS outputs
  • Weight Unpacked: 0.83 lb(0.375 kg)
  • Weight Packed: 0.95 lb(0.43 kg)
  • Width Packed: 6"(15.24 cm)
  • Height Packed: 9"(22.86 cm)
  • Depth Packed: 2.875"(7.3025 cm)

USB-P_Thumb.jpg

USB-P
$79.99
Compare
Peavey
USB-P

USB Playback

Features:
  • Standard USB audio device
  • Transformer isolation
  • Ground lifted balanced outputs
  • Playback only
  • USB powered
  • Stereo/Mono output switch
  • Weight Unpacked: 0.44 lb(0.2 kg)
  • Weight Packed: 0.44 lb(0.2 kg)
  • Width Packed: 6"(15.24 cm)
  • Height Packed: 9"(22.86 cm)
  • Depth Packed: 2.25"(5.715 cm)
MB15b-ProMatch-Stereo-Converter_Thumb.jpg

MB15b ProMatch Stereo Converter
$90.00
Compare
Rolls

MB15b ProMatch Stereo Converter

The MB15 ProMatch converts consumer level stereo RCA signals to balanced XLR professional line level, and back. One side of the unit, labeled 1, has two XLR inputs and stereo RCA outputs. The other side labeled 2, has stereo RCA inputs and two XLR outputs. Each side has stereo level controls, and an LED indicates that power is applied to the unit. An additional benefit of the MB15 is that it will act as a balanced XLR line level control. By adding a stereo pair jumper between the four RCA jacks (connecting ins to outs), the two Level controls may be inserted into any balanced XLR line.

Features:

  • Stereo Direct Box
  • Stereo RCA to stereo XLR
  • Stereo Level control for each channel
  • Works as stereo balanced line level control
  • 1/8” Headphone level to line level adaptor

DB24-Stereo-D-I_Thumb.jpg

DB24 Stereo D/I
$90.00
Compare
Rolls
DB24 Stereo D/I

introducing the new DB24 Stereo Direct Interface. This unit is a two channel isolation device designed to connect high impedance devices to low impedance. The unit is completely passive, and utilizes Rolls proprietary audio transformers for superior sound. A heavy duty steel chassis was chosen to provide maximum reliability when used in demanding live sound reinforcement applications. A variety of inputs are provided including stereo and mono 1/4", stereo RCA, and stereo 1/8" (3.5mm). The DB24 is an ideal impedance matching device for connecting any unbalanced stereo signal to a balanced system. Consumer audio equipment such as CD players, DVD players, MP3 players, etc., may be easily connected to a professional audio system.

Features:

  • Stereo RCA, 1/8" (3.5mm), and dual 1/4 Inputs
  • Balanced XLR Outputs
  • Ground Lift for each channel
  • Individual variable attenuators
dB12_Thumb.jpg

dB12
$99.95
Compare
DBX
dB12

At dbx, when we do something, we do it right. So when we decided to create our new direct injection boxes, we didn’t settle for the same old tired approach to direct box design. With our dbx name on the line, how could we? One look at our new dB10 Passive and dB12 Active direct boxes will tell you that these are clearly different. With their bullet-proof construction, and extraordinary audio performance to rival their looks, finally there’s a direct box worthy of the dbx name.

Utilizing custom dbx mu-metal-shielded audio transformers, high-quality Neutrik® connectors, and low-noise circuitry preserves the sonic integrity and true characteristics of the signal source. Both boxes include a pad switch that accomodates instrument, line and even speaker level signals. Take even more control of your sound by utilizing the polarity invert switch to set the phase relationship between the direct and mic'd sound.

As a professional, you don’t have time for interference, so we’ve included a ground lift switch to solve potential hum and buzz problems due to ground loops. And between the combined shielding of the cast metal chassis and the custom-wound transformer, you can be doubly assured of a clean signal free from interference. All of this sits atop a solid, stable footprint, that will keep the box from being dragged around the stage, and the unique contoured underside allows secure stacking of multiple units.

So whether you need to control the level, placement in the mix, or overall characteristics of 4 independent signals or control the gain leveling on a couple of stereo pairs, the dbx dB12 is for you.

Features:
  • Premium Performance
  • Rugged Design
  • Stackable Chassis with Durable Rubber Foot
  • Gold-plated Neutrik XLR Connector
  • Premium Chrome Toggle Switches
  • Hi-Z 1/4" Input Jack
  • Parallel 1/4" Thru Jack
  • Transformer Isolated
  • Premium Shielded Custom dbx Transformer
  • Balanced XLR Lo-Z Output
  • 3-Way 0/20/40 dB Pad Switch
  • Flat/High-Cut Filter Switch
  • Output Polarity Invert Switch
  • Ground Lift Switch
  • 4 Year Warranty!
Additional dB12 Features
  • Phantom Powered
  • Green LED Phantom Power Indicator
  • +48V Phantom Operation
  • Low-Noise Active Circuitr
Magnum-DI_Thumb.jpg

Magnum DI
$99.99
Compare
BBE
Magnum DI

Applications
  • Recording studio
  • Live concerts
Features:
  • Rugged, ergonomic 14-gauge steel chassis
  • Military-grade PCB
  • 2-way selectable pad (0dB/-20dB)
  • Ground lift
  • Powered by +48v phantom power
PDI_Thumb.jpg

PDI
$99.99
Compare
Peavey
PDI

Passive Direct Interface

Features:
  • Quality transformer with faraday shield
  • Instrument input and thru
  • Stereo input for electronic instruments
  • Balanced mono output
  • Ground lift switch
  • Mono/Stereo input selector
  • Weight Unpacked: 0.65 lb(0.295 kg)
  • Weight Packed: 0.77 lb(0.35 kg)
  • Width Packed: 6"(15.24 cm)
  • Height Packed: 9"(22.86 cm)
  • Depth Packed: 2.875"(7.3025 cm)
DI800_Thumb.jpg

DI800
$119.99
Compare
Behringer
Professional Mains/Phantom Powered 8-Channel DI-Box

The ULTRA-DI PRO DI800 is a professional mains/phantom powered 8-channel active DI-box. If you need a rack-mountable DI unit with enough inputs to accommodate everyone on stage or in the studio, plug into the DI800.

PRO-Active
Direct Injection (DI) boxes make it possible to connect guitars, basses and keyboards (as well as other line-level devices) to audio mixers and recorders. They are absolutely essential for proper impedance matching and to maintain signal integrity. BEHRINGER active DIs feature “buffered” inputs that won’t degrade the source signal like passive DI boxes can. Balanced signals leaving the DI800 are extremely low impedance (typically less than 680 O), and far less susceptible to noise and interference.

1/4" In, XLR Out—Is That All?
When it comes right down to it, all DI boxes do the same thing, right? Yes, but the DI800 does much more than just “bass guitar in, mic level signal out.” It really is a highly versatile input-signal toolkit.

Here are just two special features that differentiate the DI800 from most standard DI boxes:
  • Maybe you’d like to connect your guitar amp’s speaker output to your mixer? Not a problem, the DI800 features a -30 dB attenuation switch, allowing you to connect to speaker outputs (up to 3,000 Watts!) and convert them to balanced XLR outs.
  • Got a weak incoming signal? The DI800 has a +20 dB switch, which really comes in handy for boosting low-level input signals.
Of course, the DI800 provides a LINK output for easy connection to other equipment, such as onstage amplifiers and monitor consoles. Servo-balanced performance guarantees ultra-flat frequency response, and the gold-plated XLR output connectors provide reliable, low-noise operation. Per channel ground lift switches eliminate ground-loop hum problems. The DI800 does everything a standalone DI can do—times eight!

Power Trip
Unlike their passive counterparts, active DI boxes require a power source to make their internal electronics work. The DI800 provides two power options: 120 – 240 V~ from the nearest wall outlet or power strip, or +18 to +48 V DC from your mixer’s phantom power supply.

Superior Sound, Incredible Value
The 8-channel ULTRA-DI PRO DI800 delivers exceptional sound quality—at an extremely affordable price. Find out how the DI800 can help improve your sound at your nearest BEHRINGER dealer.

Features:
  • Professional and multi-purpose 8-channel direct injection box for stage and studio applications
  • Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers
  • Ultra-flat frequency response due to servo-balanced operation
  • Optional mains or phantom-powered operation
  • Allows direct connection to speaker outputs with up to 3,000 Watts
  • +20 dB gain switch for pre-amplification of low-level signals
  • Switchable input attenuation allows input levels of up to +40 dB
  • Ground Lift switch eliminates typical ground loop problems
  • Link output for easy connection to further equipment
  • 1/4" TRS and gold-plated XLR connectors
  • Illuminated switches enable perfect operation in dark stage environments
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany
DI-1_Thumb.jpg

DI-1
$149.99
Compare
Boss
DI-1

Direct Box

The DI-1 is a high-quality direct box with crystal-clear sound for transforming high-impedance, unbalanced instrument outputs to the low-impedance, balanced inputs of a mixing console.
DI-100X_Thumb.jpg

DI-100x
$149.99
Compare
BBE
DI-100X

The DI-100x is a professional-grade active Direct Input ("DI") box built primarily for recording applications. Designed with paramount importance placed on maintaining the highest sonic integrity, its major advantage over other high-end DI boxes on the market is its built-in Sonic Maximizer processor which employs the BBE 4th-generation processing engine.

Features:
  • BBE Sonic Maximizer included
  • 15dB pad switch
  • Ground lift switch
  • Recessed switches to reduce damage
  • No-slip full-bottom pad to stop slippage and prevent ground contamination through chassis-to-chassis contact
  • 5-year warranty
572690_Thumb.jpg

572690
$149.99
Compare
Peavey
572690

MSDI

Features
  • MSDI (Microphone Simulated Direct Interface)is a specially voiced direct interface used to connect guitar amplification gear to PA or recording mic inputs
  • Input from amplifier - 1/4" jack is used to interface your amp's speaker output and speaker OR your amp's line out/send to the MSDI output
  • 100% Passive circuitry - NO clipping in the MSDI and NO power supply is required
  • Features include speaker/load input, tone selector, output level control, transformer balanced XLR microphone simulated output w/ground lift
  • Weight Unpacked: 0.88 lb(0.401 kg)
  • Weight Packed: 1.00 lb(0.454 kg)
  • Width Packed: 6"(15.24 cm)
  • Height Packed: 9"(22.86 cm)
  • Depth Packed: 2.75"(6.985 cm)

Sort By: Name | Price

Results 1-40 of 5712