GVX powered subs combine a sleek, unobtrusive design with meticulous engineering to produce the finest subwoofers in Gemini’s rich history.With clean, powerful bass that’s effective without being overwhelming, the GVX-SUB12P provides that beefy sub-bass you’ve been looking for.
With over 35 years of speaker and amplifier production experience, Gemini has always placed the highest emphasis on reliability, durability and accurate, pristine sound reproduction.And these guiding standards have yielded Gemini’s best sounding subs to date.
The GVX-SUB12P offers enough power to ensure everyone in the room feels it.The built-in amplifier supplies 300 watts RMS (1200 watts peak) to its 12-inch speaker for a big bass sound that’s clear, strong and tasteful.All this bottom-end power makes the GVX-SUB12P equally ideal for gigging DJs and fixed installation applications, particularly clubs, bars and performance spaces.Plus, ergonomic handles and lightweight MDF construction make the GVX-SUB12P a compact, portable option for mobile DJs.
For exceptional reliability, the sub’s amp features thermal, short-circuit and DC protection, as well as a limiter circuit.Its electronic crossover also offers adjustable frequency control (55Hz ~ 200Hz), while its metal grille, robust construction and water-resistant paint ensure a longstanding presence in even the most demanding touring or installation environments.
The sub’s rear panel is equipped with balanced XLR/ ¼” (6.35 mm) combo inputs, as well as balanced XLR Full Range outputs and High Pass outputs.Volume and frequency controls, along with a phase switch, also give you added command over your levels and sound.
Thanks to cutting-edge sound technology and adept engineering, the new GVX series offers powerful, full-range audio accuracy at an unmatched price point from a legacy name you can trust.
Features:
300W RMS, 1200W peak
12-inch woofer with 2-inch (50.8 mm) voice coil and 50oz magnet
Built-in amp with limiter circuit
Perforated steel mesh grille
Recessed flush handles
Water-resistant textured black paint
Balanced XLR/ ¼” (6.5 mm) combo input
Balanced XLR full range output and high pass output
Electronic crossover with adjustable frequency control (55Hz ~ 200Hz)
Linear frequency response between 47Hz – 250Hz
Phase inverter switch
35mm Pole mount fitting
System Power Rating: 300 W RMS / 1200 W PEAK Frequency range: 47 Hz - 250 Hz Maximum Sound pressure level: 128 dB Woofer size: 12” Woofer Magnet: 50oz Low frequency driver: 2.0” (50.8 mm) Voice Coil Crossover frequency adjust: 55Hz to 200Hz Enclosure: 18 mm (3/4”), MDF Finish: Black acrylic lacquer Grille: Metal grille Handles: 1 Ergonomic handle on each side Pole mount: diameter 35 mm Weight: 52.9 Lbs/ 24 kgs Dimensions (WxHxD): 15.7” x 19.7” x 19.3” (398 mm x 500 mm x 490 mm)
Like its predecessor the SUB-1200, the SUB-1500 was tested thoroughly, but this time in live Karaoke, as well as full-scale club environments, ensuring a solid performance in the Karaoke and club arenas. Its small footprint design and recessed side-handles makes placement and relocation practical. With its reinforced shell construction and aviation grade carpeting, it is well protected from the elements and attractive to the eye. You won't have any trouble integrating the SUB-1500, as it has both line-level and high-level connection options. Once you experience the full-spectrum sound that the SUB-1500 brings to a sound system, you won't want to hear audio the "old" way ever again!
Features
200W of booming bass
15" Long-throw woofer to reproduce low frequencies
Dual port enclosure provides optimal power handling and low-distortion output
Very low frequency response to 20 Hz
Adjustable Crossover for variable low-pass filtering
Inputs/outputs for line-level RCA and high-level MDP connections
GVX powered subs combine a sleek, unobtrusive design with meticulous engineering to produce the finest subwoofers in Gemini’s rich history.With clean, powerful bass that’s effective without being overwhelming, the GVX-SUB15P provides that beefy sub-bass you’ve been looking for.
With over 35 years of speaker and amplifier production experience, Gemini has always placed the highest emphasis on reliability, durability and accurate, pristine sound reproduction.And these guiding standards have yielded Gemini’s best sounding subs to date.
The GVX-SUB15P offers enough power to ensure everyone in the room feels it.The built-in amplifier supplies 400 watts RMS (1600 watts peak) to its 15-inch speaker for a big bass sound that’s clear, strong and tasteful.All this bottom-end power makes the GVX-SUB15P equally ideal for gigging DJs and fixed installation applications, particularly clubs, bars and performance spaces.
For exceptional reliability, the sub’s amp features thermal, short-circuit and DC protection, as well as a limiter circuit.Its electronic crossover also offers adjustable frequency control (55Hz ~ 200Hz), while its metal grille, robust construction and water-resistant paint ensure a longstanding presence in even the most demanding touring or installation environments.
The sub’s rear panel is equipped with balanced XLR/ ¼” (6.35 mm) combo inputs, as well as balanced XLR Full Range outputs and High Pass outputs.Volume and frequency controls, along with a phase switch, also give you added command over your levels and sound.
Thanks to cutting-edge sound technology and adept engineering, the new GVX series offers powerful, full-range audio accuracy at an unmatched price point from a legacy name you can trust.
Features:
400W RMS, 1600W peak
15-inch woofer with 2.5-inch (63.5 mm) voice coil and 60oz magnet
Built-in amp with limiter circuit
Perforated steel mesh grille
Recessed flush handles
Water resistant textured black paint
Balanced XLR/ ¼” (6.5 mm) combo input
Balanced XLR Full Range Output and High Pass Output
Electronic crossover with adjustable frequency control (55Hz ~ 200Hz)
Linear frequency response between 40Hz – 250Hz
Phase inverter switch
35mm pole mount fitting
System Power Rating: 400 W RMS / 1600 W PEAK Frequency range: 40 Hz - 250 Hz Maximum Sound pressure level: 132 dB Woofer size: 15” Woofer Magnet: 60oz Low frequency driver: 2.5” (63.5 mm) Voice Coil Crossover frequency adjust: 55Hz to 200Hz Enclosure: 18 mm (3/4”), MDF Finish: Black acrylic lacquer Grille: Metal grille Handles: 2 Ergonomic handles on each side Pole mount: diameter 35 mm Weight: 65 Lbs/ 29.5 kgs Dimensions (WxHxD): 17.3” x 20.9” x 20.7” (440 mm x 530 mm x 526 mm)
High-Performance Active 1400-Watt 15" PA Subwoofer With Built-In Stereo Crossover
Our EUROLIVE B1500D-PRO and B1800D-PRO active subwoofers are destined to become the new standard in low-frequency reproduction. Packed with an incredible array of truly professional features, these brutes provide extreme levels of low-end punch, with the kind of definition and clarity typically reserved for much larger systems.
Class-D amplifiers (with switch-mode power supplies) drive the custom-designed low frequency drivers for sonically optimized output. And the best part of all—these new B1500D-PRO and B1800D-PRO provide a much better power-to weight ratio than many competing active subwoofers. Powered by 1400 Watts — in your choice of 15" and 18" versions. As always, the speakers are made by BEHRINGER in our own factory.
Put simply, these cool-running systems are much lighter, making them ultra-easy to transport and set up— and our no-compromise design means you get amazingly-deep, chestpounding bass that will keep the party going all night long. They’ll add needed bottom-end to your active full-range speaker system.
What is Class-D Technology? Instead of operating relatively continuously like Class AB circuits, Class-D amps switch on and off thousands of times per second, delivering power only when needed. In other words, the amplifier is either fully on or fully off , which significantly reduces power losses from the output devices given off as heat. Less heat means our amps don’t need massive heat sinks, and that means we can make them lighter. Our no-compromise design means the B1500D-PRO and B1800D-PRO will deliver full power with incredible fidelity all night long, without the need for lengthy rest cycles.
When used in conjunction with switching-mode power supplies, which don’t require huge and heavy transformers, our Class-D amplifiers provide tremendous dynamic punch and superior fidelity. The resulting speaker systems are much lighter, making them easy to transport and set up.
Custom-Designed Transducers The transducers (woofers and tweeters) are the only part of a sound system you actually hear, so we don’t cut any corners. We custom-design and built our transducers from scratch. Not only do we wind our own voice coils, we process the paper pulp into cones and even machine our own backplates. This enables us to control the quality, and frankly, make better components.
Take control The B1500D-PRO and B1800D-PRO feature balanced XLR inputs and outputs, as well as balanced XLR THRU jacks for connecting additional enclosures. A BOOST FREQUENCY knob targets a boost frequency between 45 Hz and 90 Hz. Flick the BOOST switch to give your selected frequency a +6 dB boost. These subs also feature a HIGH CUT dial to control the upper corner frequency for the subwoofer’s amplifier. The HIGH CUT dial does not affect the THRU signals, only signals directed to the subwoofer (however, it does affect the signals sent out through the Output sockets of the subwoofer to reach the full-range speakers). A LEVEL knob controls the input gain, and the PHASE switch reverses output phase to compensate for frequency cancellation between the subwoofer and satellite speakers. LEDs show operational status at a glance, including power, signal present and input overloads.
Which Speaker Do I Need? As you have probably noticed, we make these subwoofers in two different woofer sizes. Which one is right for you? An 18" woofer has more surface area with which to move air than a 15". If you’re engineering sound for a small jazz combo in a small club, the B1500D-PRO might be all the speaker you need. If you need to provide pounding techno sounds to a standing room only nightclub, the B1800D-PRO might be the better choice.
Features:
High-performance 1400-Watt powered subwoofer for PA applications
Powerful 15'' long-excursion transducer with high temperature voice coil provides incredibly accurate and pulse-pounding bass
Extremely high sound pressure level (126 dB half space 1 W @ 1 m)
Precise reproduction of ultra-low frequencies (35 – 150 Hz) for "bulletproof" punch and impact
State-of-the-art 1400-Watt Class-D amplifier with comprehensive over-excursion, thermal and clip limit protection
Built-in active stereo crossover provides high-pass filtered outputs for full-range loudspeakers
Tunable and switchable Bass Boost plus Phase switch for ultimate low-frequency performance
Variable High Cut control for perfect sound alignment
Subwoofer Level control to adjust the balance between subwoofer and the full-range speakers
Power, Signal and Clip LEDs for perfect monitoring
Intelligent limiter for maximum sound performance and woofer protection
Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption
Pole socket for mounting with commercial spacer poles
Ergonomically shaped handles for easy transport
Rugged steel grill for optimal speaker protection
High-quality components and exceptionally rugged construction ensure long life
GVX powered subs combine a sleek, unobtrusive design with meticulous engineering to produce the finest subwoofers in Gemini’s rich history.With clean, powerful bass that’s effective without being overwhelming, the GVX-SUB18P provides that beefy sub-bass you’ve been looking for.
With over 35 years of speaker and amplifier production experience, Gemini has always placed the highest emphasis on reliability, durability and accurate, pristine sound reproduction.And these guiding standards have yielded Gemini’s best sounding subs to date.
The GVX-SUB18P offers enough power to ensure everyone in the room feels it.The built-in amplifier supplies 500 watts RMS (2000 watts peak) to its 18-inch speaker for a big bass sound that’s clear, strong and tasteful.All this bottom-end power makes the GVX-SUB18P equally ideal for gigging DJs and fixed installation applications, particularly clubs, bars and performance spaces.
For exceptional reliability, the sub’s amp features thermal, short-circuit and DC protection, as well as a limiter circuit.Its electronic crossover also offers adjustable frequency control (55Hz ~ 200Hz), while its metal grille, robust construction and water-resistant paint ensure a longstanding presence in the most demanding touring or installation environments.
The sub’s rear panel is equipped with balanced XLR/ ¼” (6.35 mm) combo inputs, as well as balanced XLR Full Range outputs and High Pass outputs.Volume and frequency controls, along with a phase switch, also give you added command over your levels and sound.
Thanks to cutting-edge sound technology and adept engineering, the new GVX series offers powerful, full-range audio accuracy at an unmatched price point from a legacy name you can trust.
Features:
500W RMS, 2000W peak
18-inch woofer with 3-inch (76.2 mm) voice coil and 62oz magnet
Built-in amp with limiter circuit
Perforated steel mesh grille
Recessed flush handles
Water resistant textured black paint
Balanced XLR/ ¼” (6.35 mm) combo Input
Balanced XLR Full range Output and High Pass output
Electronic crossover with adjustable frequency control (55Hz ~ 200Hz)
Linear frequency response between 37Hz – 250Hz
Phase inverter switch
35mm Pole mount fitting
System Power Rating: 500 W RMS / 2000 W PEAK Frequency range: 37 Hz - 250 Hz Maximum Sound pressure level: 137 dB Woofer size: 18” Woofer Magnet: 62 oz Low frequency driver: 3” (76.2 mm) Voice Coil Crossover frequency adjust: 55Hz to 200Hz Enclosure: 18 mm (3/4”), MDF Finish: Black acrylic lacquer Grille: Metal grille Handles: 2 Ergonomic handles on each side Pole mount: diameter 35 mm Weight: 103.6 Lbs/ 47 kgs Dimensions (WxHxD): 22.04” x 26.8” x 22.8” (560 mm x 680 mm x 580 mm)
High-Performance Active 1400-Watt 18" PA Subwoofer With Built-In Stereo Crossover
Our EUROLIVE B1500D-PRO and B1800D-PRO active subwoofers are destined to become the new standard in low-frequency reproduction. Packed with an incredible array of truly professional features, these brutes provide extreme levels of low-end punch, with the kind of definition and clarity typically reserved for much larger systems.
Class-D amplifiers (with switch-mode power supplies) drive the custom-designed low frequency drivers for sonically optimized output. And the best part of all—these new B1500D-PRO and B1800D-PRO provide a much better power-to weight ratio than many competing active subwoofers. Powered by 1400 Watts — in your choice of 15" and 18" versions. As always, the speakers are made by BEHRINGER in our own factory.
Put simply, these cool-running systems are much lighter, making them ultra-easy to transport and set up— and our no-compromise design means you get amazingly-deep, chestpounding bass that will keep the party going all night long. They’ll add needed bottom-end to your active full-range speaker system.
What is Class-D Technology? Instead of operating relatively continuously like Class AB circuits, Class-D amps switch on and off thousands of times per second, delivering power only when needed. In other words, the amplifier is either fully on or fully off , which significantly reduces power losses from the output devices given off as heat. Less heat means our amps don’t need massive heat sinks, and that means we can make them lighter. Our no-compromise design means the B1500D-PRO and B1800D-PRO will deliver full power with incredible fidelity all night long, without the need for lengthy rest cycles.
When used in conjunction with switching-mode power supplies, which don’t require huge and heavy transformers, our Class-D amplifiers provide tremendous dynamic punch and superior fidelity. The resulting speaker systems are much lighter, making them easy to transport and set up.
Custom-Designed Transducers The transducers (woofers and tweeters) are the only part of a sound system you actually hear, so we don’t cut any corners. We custom-design and built our transducers from scratch. Not only do we wind our own voice coils, we process the paper pulp into cones and even machine our own backplates. This enables us to control the quality, and frankly, make better components.
Take control The B1500D-PRO and B1800D-PRO feature balanced XLR inputs and outputs, as well as balanced XLR THRU jacks for connecting additional enclosures. A BOOST FREQUENCY knob targets a boost frequency between 45 Hz and 90 Hz. Flick the BOOST switch to give your selected frequency a +6 dB boost. These subs also feature a HIGH CUT dial to control the upper corner frequency for the subwoofer’s amplifier. The HIGH CUT dial does not affect the THRU signals, only signals directed to the subwoofer (however, it does affect the signals sent out through the Output sockets of the subwoofer to reach the full-range speakers). A LEVEL knob controls the input gain, and the PHASE switch reverses output phase to compensate for frequency cancellation between the subwoofer and satellite speakers. LEDs show operational status at a glance, including power, signal present and input overloads.
Which Speaker Do I Need? As you have probably noticed, we make these subwoofers in two different woofer sizes. Which one is right for you? An 18" woofer has more surface area with which to move air than a 15". If you’re engineering sound for a small jazz combo in a small club, the B1500D-PRO might be all the speaker you need. If you need to provide pounding techno sounds to a standing room only nightclub, the B1800D-PRO might be the better choice.
Features:
High-performance 1400-Watt powered subwoofer for PA applications
Powerful 18'' long-excursion transducer with high temperature voice coil provides incredibly accurate and pulse-pounding bass
Extremely high sound pressure level (127 dB half space 1 W @ 1 m)
Precise reproduction of ultra-low frequencies (35 – 150 Hz) for "bulletproof" punch and impact
State-of-the-art 1400-Watt Class-D amplifier with comprehensive over-excursion, thermal and clip limit protection
Built-in active stereo crossover provides high-pass filtered outputs for full-range loudspeakers
Tunable and switchable Bass Boost plus Phase switch for ultimate low-frequency performance
Variable High Cut control for perfect sound alignment
Subwoofer Level control to adjust the balance between subwoofer and the full-range speakers
Power, Signal and Clip LEDs for perfect monitoring
Intelligent limiter for maximum sound performance and woofer protection
Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption
Pole socket for mounting with commercial spacer poles
Ergonomically shaped handles for easy transport
Rugged steel grill for optimal speaker protection
High-quality components and exceptionally rugged construction ensure long life
Extending the ZXA1's size-defying performance and sleek styling into the low-end realm, the ZXA1-Sub from Electro-Voice packs 700-W of self-powered punch into a low-profile wood enclosure. Match ZXA1 with ZXA1-Sub and hear just how big a small rig can sound, whether you want to add a tight thump to a DJ set or give the highs and mids some breathing room in a live performance.
Features:
Lightweight 700-W Class-D amplifier: 126-dB maximum SPL
12-inch high-output woofer
Dual XLR stereo inputs and outputs
DSP with low-end boost and polarity control
Pole mount for full-range systems
9-ply/15-mm internally braced wood enclosure with textured paint
46 pounds, with handle for easy carrying
Amplifier Power 800 Watts (RMS)
Color Black
Coverage (Nominal -6 dB) Omnidirectional
Input Connections (2) XLR Stereo Input
Power Requirement 120V: 90V-132v, 1.0 A, 50-60Hz 230V: 190V-264V, 0.6A, 50-60Hz
Speaker Type Powered Subwoofer
Frequency Response (-3 dB) 53–93 Hz
Frequency Response (-10 dB) 44–118 Hz
Max. SPL/1m (calc) 126 dB Half Space
System Power Handling (Continuous/Program/Peak) 700 Watts
LF Transducer (1) EVS-12S, 305mm (12”) Woofer
Crossover Frequency 100 Hz
Enclosure Material 9-ply, 15mm Plywood, Internally Braced, with Textured Paint
Outdoor No
Grill 16GA Steel with Black Powdercoat
Height 15.75" (400mm)
Width 17.5" (444.5mm)
Depth 18" (457.2 mm)
Weight Net 46.08 lbs (20.9 kg)
The elite LS200P is an ultra-compact powered subwoofer that features a single 10" speaker and a built in 600 watt (Peak) power module. The precisely tuned band-pass enclosure of the LS200P provides rock-solid low frequency output previously available only from much larger cabinets. In fact, the unique combination of high-excursion woofers, electronic control and proprietary, series-loaded box design results in higher acoustic output than many single 18" enclosures which are 30-50% larger!
Yorkville’s powered élite subwoofers reflect the synergistic advantage of integrating electronic and acoustic elements into one attractive package that is very versatile, transportable and, above all – great sounding! These enclosures offer the ultimate in ‘plug and play’ convenience while maximizing sonic performance. Advanced sensing circuitry offers sonically transparent limiting and thermal driver protection for maximum reliability.
Features:
Integrated 600 Watt Amplifier (200 Watts Program)
10-inch High Efficiency Woofer
Max SPL 130dB Peak (125dB Continuous)
50Hz – 110Hz Frequency Response
Paralleled 1/4-inch Selectable Line or Speaker Level Inputs
Excursion, Peak and Thermal Woofer Protection
Integrated All Metal Speaker Pole Mount Adaptor
Solid 5/8-inch (15mm) Birch Plywood Construction
Made in Canada
System Type: Subwoofer Active or Passive: Active Program Power (Watts): 200 Watts (600 Watts Peak) Max SPL (dB): 130dB Peak (125dB Continuous) Frequency Response (Hz +/- 3db): 50 - 110 Driver Configuration: 10-inch Long Excursion Woofer LF Protection: Electronic Limiting (excursion, thermal, clip) Power Cable: Yes Power Switch: Yes Inputs - 1/4" Jacks: 2 line inputs, 2 link (in/out) Level Controls: Main Volume Other Controls / Features: Selectable line or speaker level input Ground lift switch Corners: Black Steel Feet: Plastic Glides Bar Handles: 1 Side mounted Pole Mount Adapter (1 3/8"-3.5cm): 1 Top Enclosure Materials: 15mm (5/8inch) 11-ply Russian Birch Grille: Heavy gauge perforated metal Covering / Finish: Black Ozite (Carpet) Dimensions (DWH xbackW, inches): 27 x 17.5 x 14 Dimensions (DWH xbackW, cm): 69 x 44 x 36 Weight (lbs/kg): 55.1 / 25
The new ACTPRO Series is an advanced line of made in the USA powered loudspeaker systems that offer the sonic accuracy, power and reliability demanded by today’s professional performers. Fuelled by B-52’s ultra-efficient Class-G amplifiers, ACTPRO systems deliver rich, clear sound at extreme SPLs. ACTPRO amplifiers employ sophisticated circuitry including acoustically tuned 4th order crossovers, four stages of equalization, a built-in intelligent compressor/limiter and short circuit/over-current protection. An extra high current output stage allows for uninterrupted extended play without risk of thermal shutdown. ACTPRO full-range amplifiers are bi-amped with fully discrete output stages.
The ACTPRO18S subwoofer features a built-in third-order crossover with High-Pass and Full-Range outputs, allowing easy expansion of your ACTPRO system. All ACTPRO cabinets are built in the USA at our state-of-the-art Los Angeles manufacturing facility. Each model features rugged birch plywood construction, durable, black Warnecke® paint finish and 16-gauge wrap-around steel grilles, all designed to withstand the abuse of the road. Custom Celestion loudspeakers and compression drivers are used in all full-range models. The ACTPRO12M is designed to be used as a main speaker or sit as a dedicated stage monitor. The powerful ACTPRO18S 18” subwoofer includes detachable 3” casters.
Sophisticated computer modeling was used to optimize the magnetic and acoustic design of
these ferrite magnet compression drivers to achieve outstanding performance and reliability.
A matched wave front phase corrector produces a perfectly coherent sound wave at the horn throat, for a detailed and dynamic mid and high frequency performance.
The polyamide-insulated, copper-clad aluminum voice coil is edge-wound on a glass fiber former resulting in lower distortion and superior power to weight ratio.
A one-piece, PETP film diaphragm and surround optimizes energy transfer for greater efficiency
The unique patented clamping system contributes directly to low distortion performance while improving the lower mid-band response.
THE PERFECT BASS FOR YOUR 450 RIG The Mackie SRM1801 18" Powered Subwoofer delivers powerful, chest-thumping lows, perfect for your SRM450v2 PA system. The SRM1801 has a ported bass reflex design that produces tight low end. And the lightweight, ultra-efficient Class-D Fast Recovery power amplifier delivers 1000W peak power with less risk of thermal overload. This makes the sub extremely lightweight and portable, without compromising the power and performance that you need. It's the first ever 18" subwoofer specifically designed for use with the best-selling SRM450v2—add some serious low end to your portable PA with the SRM1801.
SHAKE, SHAKE, SHAKE THE ROOM What does 1000W of peak power mean to you? It means having a subwoofer that delivers rump-shaking bass night after night. It means getting class-leading power and output. To accomplish this, the SRM1801 features Class-D Fast Recovery™ amplification. Class-D amps are more efficient and lightweight, with far less waste heat produced versus competing designs. Fast Recovery means you can occasionally push into clipping without a ton of nasty distortion. So, power is no problem... but how does it sound? The SRM1801 benefits from built-in Active electronics, like a precision crossover and tuning filters for accurate bass response. Some subwoofers have decent power, but when you listen, everything sounds loose and flabby. The SRM1801 delivers professional low end that you can feel...custom tuned to be tight and punchy.
SYSTEM FRIENDLY Paired with a Mackie SRM450v2, you have a complete (and completely affordable) “plug and play” system that is ideal for small clubs, DJs or rehearsal spaces. The SRM1801 has both full-range and high-pass stereo outputs for connection to full-range top boxes. Just dial in the appropriate level and use the polarity switch to make sure the sub is in phase with the top boxes. The integrated pole-cup can accommodate a standard mounting pole, so your favorite speaker has a nice place to sit. Or you can just stack your full-range box right on top...the SRM1801 ain't picky. It's also a great match for the popular Mackie TH-15A and can easily integrate into nearly any existing PA setup you may have.
1000W of ultra-efficient Class-D Fast Recovery™ amplification Mackie Active electronics provide total system optimization
Precision crossover (125Hz)
Tuning filters for accurate bass response
18-inch woofer delivers superior output and low-frequency extension (aka Thump) Dual XLR inputs for mono or stereo applications Stereo high-pass and full range outputs User-adjustable level and polarity controls Individual power, signal, OL, and thermal protect indicators Pole receptacle for mounting full-range loudspeakers Solid plywood enclosure with high-durability, textured black paint Extremely lightweight and portable (73 lbs / 33.1 kg)
The NX200S is an ultra-compact powered subwoofer that features a single 10" speaker and a high headroom integrated power module. The precisely tuned band-pass enclosure of the NX200S provides rock-solid low frequency output previously available only from much larger cabinets. In fact, the unique combination of high-excursion woofers, electronic control and proprietary, series-loaded box design results in higher acoustic output than many single 18" enclosures which are 30-50% larger!
Yorkville’s powered NX Series subwoofers reflect the synergistic advantage of integrating electronic and acoustic elements into one attractive package that is very versatile, transportable and, above all – great sounding! These enclosures offer the ultimate in ‘plug and play’ convenience while maximizing sonic performance. Advanced sensing circuitry offers sonically transparent limiting and thermal driver protection for maximum reliability.
Features
Compact Powered Subwoofer
Integrated 600 Watt Amplifier (200 Watts Program)
10-inch High Efficiency Woofer
Max SPL 130dB Peak (125dB Continuous)
50Hz – 110Hz Frequency Response
Paralleled 1/4-inch Selectable Line or Speaker Level Inputs
Excursion, Peak and Thermal Woofer Protection
Integrated All Metal Speaker Pole Mount Adaptor
Solid 5/8-inch (15mm) Birch Plywood Construction
System Type: Subwoofer Active or Passive: Active Program Power (Watts): 200 Watts (600 Watts Peak) Max SPL (dB): 130dB Peak (125dB Continuous) Frequency Response (Hz +/- 3db): 50 - 100 Driver Configuration: 10-inch Long Excursion Woofer Power Cable: yes Power Switch: yes Inputs - 1/4" Jacks: 2 Inputs - Speakon 4-pin: Level Controls: Main Volume Other Controls / Features: Selectable line level input Ground Lift Switch Feet: Plastic Glides Bar Handles: 1 (Side) Pole Mount Adapter (1 3/8"-3.5cm): Yes (Top) Enclosure Materials: 15mm (5/8inch) 11-ply Russian Birch Grille: Perforated Metal Covering / Finish: Black Ultrathane (Paint) Dimensions (DWH xbackW, inches): 27 x 17.5 x 14 Dimensions (DWH xbackW, cm): 69 x 44 x 36 Weight (lbs/kg): 56.4 / 25.6
Clear, powerful and musical Electro-Voice loudspeakers command the stage at high-profile venues and major events worldwide. Born stage-ready, the Live X series includes powered and passive models that all feature EV-engineered components in solid wood cabinets. Wherever performance matters, Live X is serious gear for serious sound.
Designed for Pro Music, and other applications.
Serious Gear. Powered and standard Live X products are built stage-ready. They combine the power and confidence of solid wood cabinets in clean, stackable designs that are lighter than comparable EV-quality composite or plastic boxes.
Serious Sound. Live X products define a new sound for powered-wood cabinets. They feature EV-engineered components that give voice to the legendary EV sound in remarkably affordable live sound products.
Serious Choice. Live X offers a complete selection of in-demand powered and passive configurations and sizes. The series puts EV-quality choices in reach for performers, engineers and live sound businesses that have been holding out for an EV-quality experience.
ELX118P
Optimized for performance with the ELX112P and ELX115P, the ELX118P adds a deep, low-frequency, amplified punch that you can hear and feel.
Features:
Designed for Pro Music, and other applications.
18” woofer for powerful, engaging bass response
32 Hz – 130 Hz frequency range; 134 dB max SPL
700 W Class D lightweight amplifier — runs cool without fans
Rugged wood cabinet — supports pole-mounted or stacked configurations
Case Material
9-ply, 15mm Plywood, Internally Braced, with Texured Paint
The EON518S is an 18-inch, direct radiating, high performance powered compact subwoofer system. Designed to extend low frequency performance of any EON system. It also offers the convenience of an integrated crossover and stereo loop-thru capability. The EON518S is comprised of a 460 mm (18") Differential Drive® woofer driven by a 500 watt Class-D digital amplifier.
Features:
500 watt High-Performance Powered Subwoofer System
True portability weighing only 29.5 kg (65 lb)
Compact enclosure
Designed handles with comfort rubber grips for easy transport
18" Differential Drive® low-frequency driver with neodymium magnet for low-distortion and light weight
Efficient Class-D digital amplifier technology
Stereo balanced loop-through outputs
Integrated and switchable High Pass Filter on loop-through outputs
Easy “daisy-chain” connections for extending the system
Polarity reverse selector
Integrated 36 mm pole mount socket for sub/satellite applications
Rugged DuraFlex™ finish
System Power Rating: 500 W continuous, 1000 W peak Frequency Range (-10 dB): 36 Hz - 130 Hz Dimensions (H x W x D): 617 mm x 569 mm x 652 mm, (24.3 in x 22.4 in x 25.7 in) Frequency Response (±3 dB): 42 Hz - 100 Hz Maximum SPL: 129 dB Crossover Frequency: 120 Hz (HPF selectable on outputs)
Applications:
Live sound reinforcement, speech and vocals, music playback in entertainment, A/V, and institutional venues – especially when ease of use and portability are important factors.
Extending the low-frequency output performance of powered and non-powered full-range speaker systems.
Optimized for complete compatibility with EON® full-range speakers.
For those who prefer the simplicity of a self-powered subwoofer, there's the JRX118SP.
Features:
The rugged enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for durability and improved lowfrequency performance. The enclosure is covered in black carpet.
Heavy duty, all steel handles are used.
A top mounted, cast aluminum 35 mm pole mount receptacle can receive an optional SS3BK pole to facilitate use of the JRX118SP as a base for a mid-high speaker cabinet.
Built-in 500 W (peak), 300 W (continuous) amplifier. Controls, connectors, and indicators are clearly labeled with large, highcontrast graphics for easy operation in poorly lit environments.
Integral, preset limiter prevents clipping distortion. An LED illuminates to indicate that limiting is taking place.
Line-level stereo inputs are summed before being sent to the subwoofer's internal amplifier. This feature allows the JRX118SP to operate in stereo systems using a single subwoofer.
An integral crossover also provides balanced, line-level, stereo, highpassed outputs to feed powered satellite speakers or an external amplifier for passive satellites.
A speaker-level, .25 in TS phone jack is provided. This input is useful in applications, such as those employing powered mixers, in which it is more practical to bring a full-range, speaker-level signal to the subwoofer amplifier.
Power Rating: 300 W / 500 W Frequency Range: 38 Hz - 300 Hz (-10 dB) Dimensions (H x W x D): 597 mm x 516 mm x 597 mm (23.5 in x 20.3 in x 23.5 in) Frequency Response: 55 Hz - 300 Hz (±3 dB) Maximum SPL: 123 dB Weight: 40.4 kg (89 lb) Low Frequency Driver: JBL 2043-G Input Connectors: XLR/M (x2) (line level, balanced): .25 in TS phone jack (x1) (speaker level) Output Connectors: XLR/F (x2) (Selectable, Thru or High Pass)
JBL JRX118SP/230 Powered 18" portable subwoofer system includes a built-in amplifier with 500 watt (peak) and 300 watt (continuous) power; stereo, line-level, crossover with high-passed outputs; carpet-covered enclosure; 3/4" MDF construction; 18 gauge steel grille; 36 mm pole mount socket, and steel handles. Jrx S/M, JRX118SP/230
HOT BASS INJECTION The HD1501 15˝ Powered Subwoofer is the perfect compact sub for your HD Series system, creating a lightweight and portable PA solution that sounds great. The HD1501 is capable of producing 1200W of power and it does so in an extremely compact design that’s easy to move from gig to gig. Class-D Fast Recovery amplification makes the HD1501 ultra-efficient, effortlessly delivering massive power to the 15˝ driver that’s custom-designed to handle the job. Expertly tweaked tuning filters, internal crossovers and protection circuitry are designed by EAW for the ultimate in professional performance. Give your Mackie HD, SRMv2 or any other full-range system a much needed hot bass injection with the Mackie HD1501 Powered Subwoofer.
Portable, Professional PA Just pair up the HD1501 Powered Subwoofer with any HD Series full-range loudspeaker for an extremely portable PA that delivers unmatched clarity and eliminates the need for tons of expensive and heavy outboard gear. The precision-tuned HD1501 is a perfect match for the top boxes, with a high-pass output specifically designed to alleviate the power-hungry low frequencies from getting to your top boxes, allowing them to do what they do best. The entire system features protective circuitry including peak and RMS limiting, over-excursion and thermal protection to keep those lows pumping at all costs. It’s also a great match for your SRM450v2.
Power and Agility The HD1501 Powered Subwoofer delivers 1200 watts of peak power using Mackie’s Class-D Fast Recovery™ amplification. Class-D amps allow for extremely high-output in a design that is much lighter than traditional amplifiers. Normally, a sub that can push that kind of power is no fun to lug around. Okay, we can’t promise a fun load in, but we can say that your subs are now probably lighter than your bassist’s rig. It’s also really compact, which means you might even be able to carry it all by yourself…sorry roadies. Plus, our Fast Recovery™ design allows the amplifier to recover more quickly when pushed into clipping. This means less distortion when things get too loud. Hey, we would just tell you to turn it down, but we’re not the cops or your old man neighbor.
1200W of ultra-efficient Class-D Fast Recovery amplification
600W RMS / 1200W peak power
131 dB SPL max output (peak @ 1m)
36 Hz - 145 Hz operating range
15" high-output woofer with 3" voice coil Active electronics provide complete system optimization
Precision tuning filters for ultra-accurate bass reproduction
Phase alignment to perfectly complement Mackie full-range loudspeakers
Ported, direct-radiating design for maximum punch and low-frequency extension Designed and tuned by Eastern Acoustic Works (EAW) Dual XLR inputs, full-range and high-pass outputs for mono or stereo setups Level control and polarity invert switch with LED indicator Signal/limit and thermal LED indicators Integrated protection and limiting circuitry Rugged all-wood cabinet (15mm birch plywood) Pole mount receptacle for mounting full-range speaker Compact and lightweight (80 lbs / 36.3 kg)
Delivering outstanding low-frequency performance, the 1500 watt (Peak) LS720P powered subwoofer has been designed from the ground up to be the ideal companion for any medium sized live sound or DJ PA. Intended for a variety of applications, the LS720P uses a single long excursion 15-inch woofer to deliver maximum output over the entire 40 to 150 Hz range.
The LS720P has sophisticated processing circuitry that protects the driver while maximizing the use of the available power. This processing has been carefully optimized to complement the characteristics of the driver and enclosure system. The fast limiter protects against clipping and over excursion. It is located with both high and low pass filters on either side of the limiter to guarantee that only the correct frequency content reaches the driver. The slow (RMS) limiter is equalized to adjust for the impedance variations of the loudspeaker system over frequency. This ensures the maximum output of continuous bass prevalent in today's music while ensuring protection of the driver against overheating. The carefully tailored attack and release times ensure that the maximum level is available from the system.
The input section in the LS720P allows for a variety of system configurations. There are two input sections allowing two signals to be blended into the LS720P. This allows stereo left and right signals to be summed into one LS720P while preserving channel seperation of the stereo signals. Each input section has XLR male and female jacks to allow loop thru of line level signals. In addition one input section also has two 1/4-inch jacks that may be used for loop thru of line or speaker level signals. Within each section all jacks are connected in parallel.
Simple controls on the LS720P include input gain (Volume), variable high frequency cut-off and low-frequency tunable bass boost. The variable high frequency cutoff is adjustable from 90 to 150 Hz to trim the subwoofer’s low-pass filter to match any full range cabinet. A low-frequency tunable bass boost adjustable from 45 to 90 Hz has been included to allow subtle customizing of the bass character.
Proven Class D amplifier technology allows the LS720P to operate without a fan while preserving ample thermal margin. The low heat dissipation of this technology eliminates the need for large, heavy heat sinks while the lightweight neodymium-based driver further reduces overall weight.
The LS720P uses a solid 5/8th-inch 11-ply Russian birch plywood cabinet construction with an all-metal heavy gauge perforated grille to protect the speaker and electronic components. Integrated all metal bar handles and metal speaker-stand pole-mount have been included.
Paralleled XLR and 1/4-inch Selectable Line or Speaker Level Inputs
Excursion, Peak and Thermal Woofer Protection
Integrated All Metal Speaker Pole Mount Adaptor
Solid 5/8-inch (15mm) Birch Plywood Construction
Made in Canada
System Type: Powered Subwoofer Active or Passive: Active Program Power (Watts): 720 Watts (1500 Watts Peak) Max SPL (dB): 135dB Peak (128dB Continuous) Frequency Response (Hz +/- 3db): 40 - 150 adjustable Driver Configuration: 15-inch w/ 3-inch voice coil LF Protection: Electronic Limiting (Excursion, Thermal, Clip) Cooling Scheme: Passive convection Power Cable: Detachable IEC Power Switch: Yes Power Consumption (typ/max): 230VAC 50 Hz 1.2A Inputs - 1/4" Jacks: 1 In, 1 Link Out Inputs - XLR: Left and Right Male/Female Link Level Controls: Main Volume EQ Controls: HF Cut-off 90 - 150Hz Limiter: RMS / Peak / Current LED Indicators: Power / Limit / Clip Other Controls / Features: Selectable line or Speaker level input,45Hz - 90Hz variable boost frequency Feet: Rubber Bar Handles: 2 Side Mounted Pole Mount Adapter (1 3/8"-3.5cm): Top Enclosure Materials: 15mm (5/8-inch) 11-ply Russian Birch Grille: Heavy Gauge perforated metal Covering / Finish: Black Ozite Carpet Dimensions (DWH xbackW, inches): 21.5 x 18.1 x 22.75 Dimensions (DWH xbackW, cm): 54.6 x 46 x 57.8 Weight (lbs/kg): 74.5 / 33.8
Yorkville’s powered élite subwoofers reflect the synergistic advantage of integrating electronic and acoustic elements into one attractive package that is very versatile, transportable and, above all – great sounding! These enclosures offer the ultimate in ‘plug and play’ convenience while maximizing sonic performance. Advanced sensing circuitry offers sonically transparent limiting and thermal driver protection for maximum reliability.
The elite LS701P is a low profile, compact high-output, powered subwoofer with two 10-inch cast-frame speakers and a built-in 1200 Watt (Peak) power amplifier.
The precisely tuned band-pass enclosure of the LS701P provides rock-solid low frequency output previously available only from much larger cabinets. In fact, the unique combination of high-excursion woofers, electronic control and proprietary, series-loaded box design results in higher acoustic output than many single 18" enclosures which are 30-50% larger.
Paralleled 1/4-inch Selectable Line or Speaker Level Inputs
Excursion, Peak and Thermal Woofer Protection
Integrated All Metal Speaker Pole Mount Adaptor
Solid 5/8-inch (15mm) Birch Plywood Construction
Made in Canada
System Type: Subwoofer Active or Passive: Active Program Power (Watts): 720 Watts (1200 Watts Peak) Max SPL (dB): 138dB Peak (131dB Continuous) Frequency Response (Hz +/- 3db): 45 - 150 Driver Configuration: 2 x 10 inch, Cast Frame Woofers LF Protection: Electronic Limiting (excursion, thermal, clip) Cooling Scheme: Passive Convection Power Cable: Yes Power Switch: Yes Power Consumption (typ/max): 300/480VA (4A@60hz, 2A@50hz) Inputs: L & R Male/Female XLR Links Inputs - 1/4" Jacks: 1 In, 1 Link Out (line or speaker level) Inputs - XLR: L & R Male/Female XLR Links Level Controls: Main Volume EQ Controls: High Frequency Cut-Off Other Controls / Features: Selectable line or speaker level input Ground lift switch Corners: Black Steel Feet: Plastic Glides Bar Handles: 2 side mounted Enclosure Materials: 15mm (5/8inch) 11-ply Russian Birch Grille: Heavy gauge perforated metal Dimensions (DWH xbackW, inches): 24.5 x 24 x 17.5 Dimensions (DWH xbackW, cm): 62.1 x 61 x 44.5 Weight (lbs/kg): 94.5 / 42.9
SUB-TASTIC VOYAGE The 1600W HD1801 18" Powered Subwoofer is the ideal companion to your HD Series full-range loudspeakers, creating an immensely powerful and truly high-definition PA system that you can actually transport from gig to gig. Class-D Fast Recovery amplification makes the HD1801 ultra-efficient, effortlessly delivering massive power to the 18" driver that’s custom-designed to handle the job. Expertly tweaked tuning filters, internal crossovers and protection circuitry are designed by EAW for the ultimate in professional performance. Take your Mackie HD (or any other) full-range system to the next level with the Mackie HD1801 Powered Subwoofer.
A Massive System in a Snap You’ve probably been to a large club or performance venue that has an installed PA that sounds amazing. You’ve probably dreamed of getting a similar system for your needs, but…you’ve got those pesky “bills” and “child support” to deal with and they are simply out of your reach. Well, an affordable and great-sounding alternative is now available. Just pair HD1801 subwoofers with HD1531 full-range loudspeakers for the ultimate portable, high-definition PA system. The precision-tuned HD1801 is the perfect match for the HD1531, with a high-pass output specifically designed to alleviate the power-hungry low frequencies from getting to your top boxes, allowing them to do what they do best. This powerful HD system features tons of protective circuitry like peak and RMS limiting and over-excursion/thermal protection to keep the sound pumping at all costs. If you need a high-output, simple PA system that compares to some of the most expensive systems out there…look no further than HD Series.
Power and Agility The HD1801 Powered Subwoofer delivers 1600 watts of peak power using Mackie’s Class-D Fast Recovery amplification. Class-D amps allow for extremely high-output in a design that is much lighter than traditional amplifiers. Normally, a sub that can push that kind of power is no fun to lug around. Okay, we can’t promise a fun load in, but we can say that your subs are now probably lighter than your bassist’s rig. It’s also really compact, which means you might even be able to carry it all by yourself…sorry roadies. Plus, our Fast Recovery design allows the amplifier to recover more quickly when pushed into clipping. This means less distortion when things get too loud. Hey, we would just tell you to turn it down, but we’re not the cops or your old man neighbor.
1600W of ultra-efficient Class-D Fast Recovery amplification
800W RMS / 1600W peak power
133 dB SPL max output (peak @ 1m)
35 Hz to 145 Hz operating range
18” high-output woofer with 4” voice coil Active electronics provide complete system optimization
Precision tuning filters for ultra-accurate bass reproduction
Phase alignment to perfectly complement Mackie full-range HD loudspeakers
Ported, direct-radiating design for maximum punch and low-frequency extension Designed and tuned by Eastern Acoustic Works (EAW) Dual XLR inputs, full-range and high-pass outputs for mono or stereo setups Level control and polarity invert switch with LED indicator Signal/limit and thermal LED indicators Integrated protection and limiting circuitry Rugged all-wood cabinet (15mm birch plywood) Pole mount receptacle for mounting full range speaker 12 integrated M10 flypoints Optional Caster Kit (ACC-CK100) Compact and lightweight (106 lbs / 48.1 kg)
The EU 118D features a 1,000-watt Peavey IPR power section and a Low Rider® 18 woofer in a highly rugged enclosure. The EU 118D also features a fourth order Linkwitz-Riley crossover that has eight selectable low frequency crossover points, a crossover in/out switch, low frequency enhancement, and a high-pass output to send the signal out to an EU powered high/mid enclosure.
Features:
1,000W IPR power amplifier
Full power handling down to 34 Hz
Fourth order Linkwitz-Riley crossover with eight discrete low-frequency crossover points
Bass enhancement circuit
Crossover in/out switch
Field-replaceable basket
Compact and lightweight design
Speaker pole mount
Heavy-duty steel handles inset on both sides
HammerHead Polyurethane black finish
Full-length, perforated steel grille for speaker protection
1200-Watt Active 18" Subwoofer — Black-Carpet Finish
Our new generation of ACT-Series subwoofers are the ultimate solution for low frequency sound reinforcement. These innovative active subs deliver up to 135dB of deep, rich, chest pounding bass. At the heart of the ACT subwoofers is our award-winning 1200-watt class H amplifiers. The overbuilt amp design includes a compressor / limiter, subsonic filter, phase switch, stereo XLR inputs and both full-range and high-pass XLR outputs. The built-in 18dB/octave electronic crossover provides 70Hz, 100Hz and 140Hz settings allowing you to perfectly match your top cabinets to this subwoofer. What sets the ACT-18XV2 apart is its ability to ALSO power the passive ACT-18XSV2 subwoofer using the Neutrik™ output on the amplifier panel. Get one active and one passive – connect them together and feel the walls shake!
Active powers the passive The ACT-18XV2 (active) subwoofer is designed to power an additional passive subwoofer (ACT-18XSV2). The passive subwoofer has the same physical dimensions as the active model. Connecting them together increases the available amp power from 800 to 1200 watts. An additional 3dB SPL boost is achieved if subs are placed near each other.
Cabinet features
Superior grade 13-ply Baltic birch plywood
Heavy-duty scratch resistant durable black
Carpet finish with tilt-back handle & 3”
casters (ACT-18V2, ACT-18SV2)
16-gauge perforated steel grille for maximum protection
1200-Watt Active 18" Subwoofer — Black-Paint Finish
Our new generation of ACT-Series subwoofers are the ultimate solution for low frequency sound reinforcement. These innovative active subs deliver up to 135dB of deep, rich, chest pounding bass. At the heart of the ACT subwoofers is our award-winning 1200-watt class H amplifiers. The overbuilt amp design includes a compressor / limiter, subsonic filter, phase switch, stereo XLR inputs and both full-range and high-pass XLR outputs. The built-in 18dB/octave electronic crossover provides 70Hz, 100Hz and 140Hz settings allowing you to perfectly match your top cabinets to this subwoofer. What sets the ACT-18XV2 apart is its ability to ALSO power the passive ACT-18XSV2 subwoofer using the Neutrik output on the amplifier panel. Get one active and one passive – connect them together and feel the walls shake!
Yorkville’s powered élite subwoofers reflect the synergistic advantage of integrating electronic and acoustic elements into one attractive package that is very versatile, transportable and, above all – great sounding! These enclosures offer the ultimate in ‘plug and play’ convenience while maximizing sonic performance. Advanced sensing circuitry offers sonically transparent limiting and thermal driver protection for maximum reliability.
The elite LS701PB is a low profile, compact high-output, powered subwoofer with two 10-inch cast-frame speakers and a built-in 1200 Watt (Peak) power amplifier.
The precisely tuned band-pass enclosure of the LS701PB provides rock-solid low frequency output previously available only from much larger cabinets. In fact, the unique combination of high-excursion woofers, electronic control and proprietary, series-loaded box design results in higher acoustic output than many single 18" enclosures which are 30-50% larger.
Paralleled 1/4-inch Selectable Line or Speaker Level Inputs
Excursion, Peak and Thermal Woofer Protection
Integrated All Metal Speaker Pole Mount Adaptor
Solid 5/8-inch (15mm) Birch Plywood Construction
Made in Canada
System Type: Subwoofer Active or Passive: Active Program Power (Watts): 720 Watts (1200 Watts Peak) Max SPL (dB): 138dB Peak (131dB Continuous) Frequency Response (Hz +/- 3db): 45 - 150 Driver Configuration: 2 x 10 inch, Cast Frame Woofers LF Protection: Electronic Limiting (excursion, thermal, clip) Cooling Scheme: Passive Convection Power Cable: Yes Power Switch: Yes Power Consumption (typ/max): 300/480VA (4A@60hz, 2A@50hz) Inputs: L & R Male/Female XLR Links Inputs - 1/4" Jacks: 1 In, 1 Link Out (line or speaker level) Inputs - XLR: L & R Male/Female XLR Links Level Controls: Main Volume EQ Controls: High Frequency Cut-Off Other Controls / Features: Selectable line or speaker level input Ground lift switch Corners: Black Steel Feet: Plastic Glides Bar Handles: 2 side mounted Enclosure Materials: 15mm (5/8inch) 11-ply Russian Birch Grille: Heavy gauge perforated metal Dimensions (DWH xbackW, inches): 24.5 x 24 x 17.5 Dimensions (DWH xbackW, cm): 62.1 x 61 x 44.5 Weight (lbs/kg): 94.5 / 42.9
The rear panel has mic and line level inputs, allowing you to connect a wide variety of microphones, instruments, music players, mixers, and more. A selectable high-pass filter allows you to use the loudspeaker with a subwoofer for enhanced bass response. The speaker weighs under 20 pounds and has an integrated handle for easy mobility. A pole mount socket lets you mount the unit on a standard speaker pole.
Features:
Compact and lightweight with an integrated carrying handle for easy mobility
Natural enclosure angle, ideal for stage monitoring
8" high-output woofer and 1" true compression tweeter provide a wide frequency response
Internal 800W power amplifier delivers a high-energy performance with low distortion for crisp, clear audio
90 x 50° coverage pattern with a rotatable horn design for terrific flexibility
Mic and line level inputs allow you to connect a wide variety of microphones, instruments, music players, mixers, and more
Selectable high-pass filter lets you use the loudspeaker with a subwoofer for enhanced bass response
Pole mount socket lets you mount the unit on a standard speaker pole
ZXA1-SUB-120V
Extending the ZXA1's size-defying performance and sleek styling into the low-end realm, the ZXA1-Sub from Electro-Voice packs 700-W of self-powered punch into a low-profile wood enclosure. Match ZXA1 with ZXA1-Sub and hear just how big a small rig can sound, whether you want to add a tight thump to a DJ set or give the highs and mids some breathing room in a live performance.
Features:
Lightweight 700-W Class-D amplifier: 126-dB maximum SPL
12-inch high-output woofer
Dual XLR stereo inputs and outputs
DSP with low-end boost and polarity control
Pole mount for full-range systems
9-ply/15-mm internally braced wood enclosure with textured paint
Lightweight portable powered speakers with legendary QSC amplifier power and reliability
1000 watt continuous Class D power module
Extensive DSP enhances system performance
Attractive and professional appearance
Rugged birch plywood enclosure
Tour-grade 18 gauge steel grilles
Comfortable ergonomic handles
Threaded pole socket with speaker pole included
The KSub is a dual-12" bandpass design, constructed of premium birch and includes high-quality, low-noise casters. The subwoofer features a threaded pole receptacle for a positive, wobble free connection to a threaded speaker pole (included).
Remote gain control capability is offered via a potentiometer (not included) connected to the on-board Euroblock connector. In an installed application, multiple K Series speakers can be "daisy-chained" for total gain control from a single remote pot. Auto-standby mode is engaged after 5 minutes of inactivity
Extensive DSP
DMT (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
Intrinsic Correction, first featured in our high-end line-array products maps 65-75 spacially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat bandpass target. The result is a speaker that behaves equally well across the entire sound field.
DEEP and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
GuardRailS protection, first introduced on our GX Series amplifiers protects both the amplifier module and your performance from unnatural and destructive clipping.
Configuration: 4th Order Bandpass Transducers Low-frequency: 2 x 12" cone transducers Frequency Response (-6 dB): 48 Hz - 134 Hz Frequency Range (-10 dB): 44 Hz - 148 Hz Maximum SPL: 130 dB peak
Amplifiers Power Output: 1000 W continuous Class D (2x500 W), 2000 W peak Input Impedance (ohms): XLR / ¼": 40k balanced / 20k unbalanced Controls: Power, Gain, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse), Front LED (On/Off/Limit) Indicators: Power, Signal, Standby, Limit Connectors: Dual balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out, Remote gain control, Locking IEC power connector Cooling: On demand, 50 mm variable speed fan Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail Transducer Protection: Thermal limiting, excursion limiting AC Power Input: Universal power supply 100 - 240 VAC, 50 - 60 Hz AC Power Consumption(1/8 Power): 100 VAC, 2.3 A, 120 VAC, 2.01 A, 230 VAC, 1.13 A
Enclosure Material: Painted birch plywood Finish: Black textured paint Dimensions (HWD): 26" x 14" x 28.1" (including casters), 665 mm x 356 mm x 714 mm Weight (Net): 74 lb / 33.6 kg Available Accessories: KSub COVER
The LX-18AV3 (active) and LX-18V3 (passive) are the third generation of our powerful folded horn subwoofer design, hailed by music professionals for their reliability, performance and affordability. The V3 is bigger, louder and better. V3 improvements include a larger cabinet with an improved horn design and our new overbuilt class H amplifier. At the heart of these folded horn cabinets is the new 18-220X subwoofer which provides higher efficiency and an ultra-efficient heat management system which keeps the speaker cool even when driven at high SPLs.
The LX-18AV3 is powered by our award-winning 1200-watt class H amplifier. The overbuilt design includes a compressor/ limiter, subsonic filter, phase switch, stereo XLR inputs and both full-range and high-pass XLR outputs. The built-in 18dB/octave electronic crossover provides 70Hz, 100Hz and 140Hz settings allowing you to perfectly match your top cabinets to this sub. What sets the LX-18AV3 apart is its ability to ALSO power the passive LX-18V3 subwoofer using the Neutrik output on the amplifier panel. Get one active and one passive – connect them together and feels the walls shake!
Built-in 18dB/octave electronic crossover with 70Hz, 100Hz and 140Hz settings
Subsonic filter: 24dB/octave @ 30 Hz
Built-in compressor/limiter
XLR balanced inputs
XLR balanced FR & HP outputs
0-180° phase switch
Neutrik speaker output
Full thermal & short circuit protection
At the heart of the beast All B-52 folded-horn cabinets are loaded with the new B-52 18-220X subwoofer which provides high-power handling, great efficiency, very low distortion and accurate sound reproduction. Key features include:
4-inch “inside/outside” voice coil wound on both sides of the glass fiber coil former, providing more effective cooling through greater air contact
The light weight and robust cast aluminum frame is shaped to minimize reflections on the back of the cone
The entire loudspeaker is designed to work as a “heat sink” for extreme cooling efficiency
The advanced magnet topology ensures an even distribution of magnetic flux throughout the whole magnet assembly, resulting in symmetrical motor movement preventing stray flux which can cause
interference
The glass-fiber impregnated cone incorporates a sealed surround and added edge-damping to greatly reduce the occurrence of unwanted cone resonances
The vented magnet ensures constant air circulation to drive heat away from the magnet assembly
Built-in compression chamber The 18” subwoofers are housed in a compression chamber that minimizes the excursion of the driver while maximizing the subwoofers’ output. The optimally-sized acoustic aperture of the compression chambers forms the throat of the horn and helps force the air at an increased velocity and pressure. The compression chamber optimizes the horn’s output, allowing for amazing output levels.
Efficient aluminum heatsink design The new aluminum heatsink design dissipates heat in the cabinet’s compression chamber. This provides increased thermal power handling, decreased power compression, increased output and cooler long-term operation.
First choice in active subwoofers, the LS800P combines a cast-frame, neodymium-based 18-inch bass driver with a rear-loaded bass horn enclosure made from 15mm birch ply covered in rugged black carpeting (black ultrathane-painted version - LS800PB - is also available). Now add 1,500 Watts of onboard power featuring full-time "invisible" limiting .Result - a rugged, high-powered "earth mover." Balanced XLR inputs are included along with 1/4-inch TRS inputs which, at the push of a button, can handle either line-level or speaker-level signals (you can simply connect it to any full-range speaker for quick and easy setups). Connections also include both XLRM and 1/4" Output Link jacks for interconnecting up to 10 LS800P's in larger concert systems. An additional XLR 'Mono Blend Input' allows the LS800P to function in a stereo system by blending the balanced L & R signals from a stereo mixer and creating a single in-phase mono signal.
The control panel features a +/- 12dB Level pot for matching the LS800P's output with the rest of the system, a tunable 90 to 150Hz HF Roll off pot to let you match the LS800P to any full-range enclosure without an electronic crossover, a unique Shape control that modifies the bass response, a Line/Speaker Input Level button and LEDs to indicate Power, Limit and Clip.
Hardware includes four steel inset handles, a steel top-mounted pole-stand adapter, a heavy-gauge curved steel grill and tilt-back wheels
System Type: Rear Horn Loaded Subwoofer Active or Passive: Active Program Power (Watts): 1500 Max SPL (dB): 134 Frequency Response (Hz +/- 3db): 45 - 150 LF Driver(s): Single 18 inch w/ 4 inch voicecoil LF Program Power(Watts): 1500 LF Protection: Thermal / Overcurrent / Clip Power Consumption (typ/max): 792/960VA (8A@60hz, 4A@50hz) Inputs - 1/4" Jacks: 2 line/speaker level inputs, 2 link (in/out) Inputs - XLR: 2 line inputs, 2 link (in/out) Level Controls: Master Other Controls / Features: Active Controls: Level Low Pass Filter Frequency Bass Boost Level Corners: Metal Feet: Rubber Bar Handles: 2 (Side), 1 (Rear) Pole Mount Adapter (1 3/8"-3.5cm): 1 (Top) Enclosure Materials: 15mm (5/8inch) 11-ply Russian Birch Grille: Perforated Metal Dimensions (DWH xbackW, inches): 23 x 27.5 x 32 Dimensions (DWH xbackW, cm): 58.4 x 70 x 81.3 Weight (lbs/kg): 137.3 / 62.3
First choice in active subwoofers, the LS801P combines a cast-frame 18-inch bass driver with a rear-loaded bass horn enclosure made from 15mm birch ply covered in rugged black carpeting.Now add 2500 watts of onboard peak power featuring full-time "invisible" limiting. Result - a rugged, high-powered "earth mover." Balanced XLR inputs are included along with 1/4-inch TRS inputs which, at the push of a button, can handle either line-level or speaker-level signals (you can simply connect it to any full-range speaker for quick and easy setups). Connections also include both XLRM and 1/4" Output Link jacks for interconnecting up to 10 LS801P's in larger concert systems. An additional XLR 'Mono Blend Input' allows the LS801P to function in a stereo system by blending the balanced L & R signals from a stereo mixer and creating a single in-phase mono signal.
The control panel features a +/- 12dB Level pot for matching the LS801P's output with the rest of the system, a tunable 90 to 150Hz HF Roll off pot to let you match the LS801P to any full-range enclosure without an electronic crossover, a unique Shape control that modifies the bass response, a Line/Speaker Input Level button and LED's to indicate Power, Limit and Clip.
Hardware includes four steel inset handles, a steel top-mounted pole-stand adapter, a heavy-gauge curved steel grill and tilt-back wheels. Features:
The UCS1P was designed for use with the any of the Unity passive or active loudspeaker systems is ideal active subwoofer to match their acoustic parameters. But as with all Yorkville subs, the UCS1P can be employed with any full-range enclosure, especially those with high output, in many cases without even the need of a crossover.
This 1,500-Watt “earth mover” takes full advantage of its horn-loaded design to deliver fierce bottom end from a surprisingly compact, single 15-inch, back-loaded subwoofer. The high level of performance UCS1P delivers, especially considering its manageable size, is the direct result of outstanding driver, enclosure and electronic design. Optimized horn flare geometry, careful attention to the front and rear internal chamber dimensions, as well as the use of a high performance long excursion 15-inch driver, gives the UCS1 surprisingly high output volume and deep, extended bass response. Added to that, the onboard electronics include a 1,500-Watt amplifier, full-time soft limiting, an active, adjustable low-pass filter (HF Rolloff) and an adjustable pre-EQ curve (Shape) for plug-and-play ease of use!
The UCS1P enclosure is constructed from solid 15mm 11-ply birch and features a heavy gauge perforated metal grill , integrated tilt-back wheels and four strategically placed bar handles to make moving and stacking the UCS1P as easy as it can possibly be for a subwoofer in this class.
First choice in active subwoofers, the LS801P combines a cast-frame
18-inch bass driver with a rear-loaded bass horn enclosure made from
15mm birch ply covered in rugged black carpeting.Now add 2500 watts of
onboard peak power featuring full-time "invisible" limiting. Result - a
rugged, high-powered "earth mover." Balanced XLR inputs are included
along with 1/4-inch TRS inputs which, at the push of a button, can
handle either line-level or speaker-level signals (you can simply
connect it to any full-range speaker for quick and easy setups).
Connections also include both XLRM and 1/4" Output Link jacks for
interconnecting up to 10 LS801P's in larger concert systems. An
additional XLR 'Mono Blend Input' allows the LS801P to function in a
stereo system by blending the balanced L & R signals from a stereo
mixer and creating a single in-phase mono signal.
The control panel features a +/- 12dB Level pot for matching the
LS801P's output with the rest of the system, a tunable 90 to 150Hz HF
Roll off pot to let you match the LS801P to any full-range enclosure
without an electronic crossover, a unique Shape control that modifies
the bass response, a Line/Speaker Input Level button and LED's to
indicate Power, Limit and Clip.
Hardware includes four steel inset handles, a steel top-mounted
pole-stand adapter, a heavy-gauge curved steel grill and tilt-back
wheels.
1 - 6' XLR Cable (To go from Top Sub to top Speaker)
1 - Adjustable Speaker Pole
Information on System:
ZXA1-90B-120V
The rear panel has mic and line level inputs, allowing you to connect a wide variety of microphones, instruments, music players, mixers, and more. A selectable high-pass filter allows you to use the loudspeaker with a subwoofer for enhanced bass response. The speaker weighs under 20 pounds and has an integrated handle for easy mobility. A pole mount socket lets you mount the unit on a standard speaker pole.
Features:
Compact and lightweight with an integrated carrying handle for easy mobility
Natural enclosure angle, ideal for stage monitoring
8" high-output woofer and 1" true compression tweeter provide a wide frequency response
Internal 800W power amplifier delivers a high-energy performance with low distortion for crisp, clear audio
90 x 50° coverage pattern with a rotatable horn design for terrific flexibility
Mic and line level inputs allow you to connect a wide variety of microphones, instruments, music players, mixers, and more
Selectable high-pass filter lets you use the loudspeaker with a subwoofer for enhanced bass response
Pole mount socket lets you mount the unit on a standard speaker pole
ZXA1-SUB-120V
Extending the ZXA1's size-defying performance and sleek styling into the low-end realm, the ZXA1-Sub from Electro-Voice packs 700-W of self-powered punch into a low-profile wood enclosure. Match ZXA1 with ZXA1-Sub and hear just how big a small rig can sound, whether you want to add a tight thump to a DJ set or give the highs and mids some breathing room in a live performance.
Features:
Lightweight 700-W Class-D amplifier: 126-dB maximum SPL
12-inch high-output woofer
Dual XLR stereo inputs and outputs
DSP with low-end boost and polarity control
Pole mount for full-range systems
9-ply/15-mm internally braced wood enclosure with textured paint
The 1400-watt dual 12-inch active PSA1S bass reflex subwoofer is the ideal companion sub for the PSA1 full range loudspeaker system. Solid 15mm birch plywood cabinet construction and an integrated all-metal pole-mount adaptor make the PSA1S the perfect platform for stacking PSA1 cabinets in a scalable array system. Compact design, heavy-duty wheels and handles ensure the PSA1S can easily be handled by a single operator for economical system set-up.
Efficient Class-D power amplifier design provides unmatched long-term reliability in the field. Cable of direct connection to any audio source (including speaker level input) the PSA1S can be easily integrated in to virtually any PA application, making it one of the most versatile active subwoofer solutions Yorkville Sound currently offers.
Features:
Ultra High Performance Compact Active Subwoofer
High Quality Dual 12-inch Speaker Components
Bass Reflex Design
Ideal Companion Subwoofer for PSA1 System
Solid 15mm Birch Cabinet Construction
Integrated Pole Mount Adaptor & Heavy Duty Wheels
Made in Canada
Active or Passive: Active Program Power (Watts): 1400 Watts Program (2800 Watts Peak) Max SPL (dB): 135dB Peak (129dB Continuous) Frequency Response (Hz +/- 3db): 37Hz-100Hz Crossover Frequency (Hz): fixed @ 100Hz Driver Configuration: 2x12-inch (Bass Reflex Cabinet) LF Driver(s): 2x12-inch Ceramic with 3-inch VoiceCoil LF Impedance(Ohms): 2x4 Ohm Load LF Power Amplifier (Watts): Class D Power Consumption (typ/max): 210VA / 440 VA Enclosure Materials: 15mm Birch Baffle Material: 15mm Birch Covering / Finish: Paint Dimensions (DWH xbackW, inches): 22.75 x14 x 32 Dimensions (DWH xbackW, cm): 57.8 x 35.6 x 81.3 Weight (lbs/kg): 75 / 34.2
The KLA Series brings the power and sophistication of a line array system into an easy-to-use product significantly redefining the line array product category. With its simple Lift, Click and Play approach, KLA can be deployed in a fraction of the time required by comparable line array products.
This fixed arcuate, active line array system is ideal for a wide range of portable and permanently installed applications ranging from live entertainment to houses of worship or other venues where a line array system is desired.
KLA Power Module KLA loudspeakers incorporate QSC's DEEP DSP algorithm - providing extended bass response by actively managing potentially damaging low-frequency transients - and GuardRail circuitry protection which prevents the amplifier module from unnatural and destructive clipping.
As an energy saving feature, the Auto Standby mode automatically engages after five minutes of inactivity but upon resumption of audio signal, the power module on the KLA will awaken instantly for immediate output.
In an installed application, multiple KLA Series loudspeakers can be "daisy-chained" for total gain control from a single remote pot wired to the on-board Phoenix-style connector. Additional power module characteristics on KLA include a balanced, line-level XLR input in parallel with an XLR "Thru" connector, PowerCon In and Thru connectors, Attenuation Control and LED indicators for Signal, Limit, Power and Standby status.
KLA181 Subwoofer In addition to DEEP DSP algorithm, GuardRail, Auto Standby, balanced line-level XLR input with an XLR "Thru" connector, Attenuation Control and LED indicators, the KLA181 subwoofer also includes a polarity switch for low frequency directivity control.
Rigging & Deployment For maximum deployment flexibility, KLA loudspeakers can be either ground deployed or flown. As a ground stack, up to two KLA12 enclosures can be mounted over the KLA181 or the KW181 subwoofer via a threaded pole socket, or without a sub using an appropriately rated loudspeaker stand.
Arrays of up to 480 lbs (218 kg) (with a maximum five KLA12 and two KLA181 enclosures) can be flown via the included M10 fittings or the optional KLA AF12 array frame.
Features
1,000 watt power module
18" vented subwoofer
High acoustic output (135 dB SPL peak)
Frequency range down to 33 Hz (-10 dB)
Extensive DSP further enhances and protects performance
powerCON® Input and Thru connections
Threaded pole-cup receptacle for free-standing applications
Suspension made possible via M10 fittings or KLA12AF Array Frame
Integrated threaded pole mount supports up to two KLA12 enclosures
Configuration: 18" subwoofer Transducers Low Frequency: 18" cone transducer Frequency Response (-6 dB): 38 Hz Frequency Range (-10 dB): 33 Hz Maximum SPL (1 meter): 135 dB peak
Amplifiers Power Output: 1000 W Class D continuous Input Impedance (ohms): XLR: 40k balanced / 20k unbalanced Controls: Power, Attenuation, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse), Front LED (Pwr/Limit/Off) Indicators: Power, Signal, Standby, Limit Connectors: Balanced female XLR line level input, Balanced male XLR full range line level out, Remote attenuation control, Locking powerCON power connector AC In, Locking powerCON® power connector AC Out Cooling: On demand, 50 mm variable speed fan Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail™ Transducer Protection: Thermal limiting, excursion limiting AC Power Input: Universal power supply 100 - 240 VAC, 50 - 60 Hz AC Power Consumption(1/8 Power): 100 VAC, 2.3 A, 120 VAC, 2.01 A, 230 VAC, 1.13 A
Enclosure Material: Painted birch plywood Finish: Black or White textured paint Grille: Black or White powder coated 16 gauge steel Dimensions (HWD): 21.6" x 23.1" x 25.7", (547mm x 586mm x 633mm) Weight (Net): 100 lb (45.3 kg) Available Accessories: KW181 POLE