Featuring an impressive brightness of 3200 ANSI lumens, a ultra-high contrast ratio of 10000:1 and a WXGA resolution, the MW712 offers a stunning full-screen presentation with the finest details regardless of the ambient light level.
World-Leading SmartEco Technology
for a Greener Environment
Schools today face the challenge of introducing new technologies and teaching tools into their classrooms and cut down on energy costs. In the effort to help schools meet the learning needs of their students as well as the green goals set by the school district, BenQ has collaborated with Philips Lighting in developing the perfect solution - the SmartEco Technology.
The SmartEco Technology brings a new way of operating the projector lamp system. Intuitive to use and environmentally friendly, this technology brings together the finest picture quality and maximum energy saving. With the SmartEco Technology, students and teachers get to make the most out of their classroom experience - and schools reduce the total cost of ownership with extended lamp life and lowered maintenance needs.
Eco Blank Mode
The Eco Blank mode allows teachers to blank the projection screen whenever they need to direct their students' focus back on them - or simply when the projector is not in use. When activated, this special feature dims the lamp power automatically, lowering the total power consumption by up to 70%.
The SmartEco mode is designed to use only the exact amount of lamp power a projector needs to deliver the best contrast performance. With this feature, schools get to provide students and teachers uncompromised projection quality and reduce the total cost of ownership by extending the lamp life and lowering power consumption.
No Source Detected Mode
There will be times when a projector is turned on without a display source, such as a classroom PC or notebook. To avoid a projector from running with full lamp power, BenQ created the No Source Detected Mode to lower the projector lamp brightness to 30% after the projector has remained unconnected to a display source for more than three minutes.
The Perfect Sound Solution
Built-in 10W Big Audio Power
The MW712 features one built-in 10W speaker to help enrich every lesson with top quality audio performances. These speakers are sealed and secured within the projector housing by BenQ's anti-shake design to ensure projection stability at all times.
Projection System: DLP
Native Resolution: WXGA (1280 x 800)
Brightness: 3200 ANSI Lumens
Contrast Ratio: 10000:1
Display Color: 1.07 Billion Colors
Lens: F=2.55-3.06, f=21-25.6mm
Aspect Ratio: Native 16:10 (5 aspect ratio selectable)
Throw Ratio: 1.46-1.60 (62.25"@ 6.56ft)
Image Size (Diagonal): 30"~300"
Zoom Ratio: 1.2:1
Lamp (Normal/Economic Mode)*: 230W, 3500/5000 hours (up to 6500 hours under SmartEco mode)
Keystone Adjustment: Manual, Vertical ± 40 degrees
Projection Offset: 120%±5%
Resolution Support: VGA(640 x 480) to UXGA(1600 x 1200)
Horizontal Frequency: 31K~102KHz
Vertical Scan Rate: 23~120Hz
Computer Compatibility: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Computer in (D-sub 15pin) x 2 (Share with Component)
Monitor out (D-sub 15pin) x 1
HDMI(v1.3) x 1
Composite Video in (RCA) x 1
S-Video in (Mini DIN 4pin) x
Audio in (Mini Jack) x 2
Audio L/R in (RCA) x 2
Audio out (Mini Jack) x 1
Speaker 10W x 1
LAN (RJ45) x 1
USB (Type B) x1 (Download & page/down)
RS232 (DB-9pin) x 1
IR Receiver x2 (Front+Top)
Dimensions(W x H x D): 11.89 x 4.88 x 9.16 in (302x124x232.7 mm)
Video Compatibility: NTSC, PAL, SECAM
Weight: 5.39lbs. (2.45 kg)
Audible Noise: 29/27 dBA (Normal/Economic mode)
Power Supply: AC100 to 240 V, 50 to 60 Hz
Power Consumption: 285W(Typical), Standby<1W
Picture Modes: Dynamic/Presentation/sRGB/Cinema/User 1/User 2
3D Support and Compatibility:
PC: 120Hz Frame Sequential 3D for resolutions up to WXGA,
PC: 60Hz Top-bottom 3D for resolutions up to SXGA+
Video: 60Hz Frame Sequential 3D for resolutions up to 480i