Ikey-Audio

10" Active Subwoofer

The M-10Sv2 Active Subwoofer is a 10” powered bass enclosure that puts out 175 watts (peak) and provides a frequency response between 35Hz and 200Hz to give you thundering, yet accurate bass for your mixes The front-firing bass port ensures the M-10Sv2 is sending powerful and accurate bass to the listener, rather than to the room. Also, you’ve got to admit: the red looks pretty cool!

The all-new iKEY-AUDIO MV2 Series Active Studio Monitors take value-priced monitors to a whole new performance level. All the amazing sound quality and performance, including all the dynamics of the original M-Series are all still there (front-firing bass port, soft-domed tweeter, glass aramid composite woofer), but the MV2 Series feature a refined voicing and new sleek look that provides even better monitoring accuracy.

Designed for class and built for power and precision, the MV2 Series Active Studio Monitors easily produce a crisp and extensive range of frequencies, perfect for professional studios seeking versatile monitors. From small mixing environments to multi-channel surround sound setups, these monitors provide a truly professional level of accuracy, sonic clarity and transparency, giving you the ultimate combination of full range monitoring.

Features:

• 175W high efficiency Class-D amplifier
• 10’’ red woven glass aramid composite woofer
• Balanced (XLR & ¼”) input
• Built in crossover
• Pass through capability for direct connection to monitors
• Slotted ports for reduced distortion
• Attractive design with rounded edges and Red woofer
• Magnetically shielded
• Volume Control
• Power indicator

Weight: 33.2Lbs/15.1kgs
Dimensions (W x H x D): 12.5” x 15” x 15”
Dimensions (W x H x D): 318 x 381 x 381 mm

Yorkville

YSS2

150w 10-inch Active Studio Subwoofer

The ultra-compact 150-watt Yorkville YSS2 active studio subwoofer is the ideal companion for any DAW, project or midi studio where additional bottom end in the monitoring system is required, yet space may be at a premium. Designed for easy hook-up to any source, the YSS2 offers stereo RCA In/Outs for connection between mixer and active monitors, as well as speaker push-terminal In/Outs for connection between power amplifier and passive monitors. In either case, the stereo inputs are internally summed to mono for the YSS2’s power module.

Rear panel features on the YSS2 include a Level control, a Phase inversion switch and a 50 to 200Hz “Crossover” control for low-pass filter regulation of the YSS2’s upper frequencies so that it can be matched with the natural bass-rolloff of full-range monitors. The back panel also features a 3-postion power switch with an Auto setting that instantly powers up the YSS2’s amplifier when signal appears at either the RCA or speaker-tab inputs.

Features:

• 10-inch, 150-watt studio subwoofer
• Stereo RCA and Speaker Terminal In/Outs
• Stereo inputs are summed to create a mono subwoofer mix
• Stereo source input is passed through the system unaffected to the near field monitor system
• Level Control
• Phase Inversion switch
• Selectable sweepable high pass filter (50 to 200Hz)
• Auto-on function powers up subwoofer when receiving a signal

System Type: Studio Subwoofer
Active or Passive: Active
Program Power (Watts): 150
Max SPL (dB): 105
Frequency Response (Hz +/- 3db): 45 - 300
LF Driver(s): 10-inch ceramic magnet driver
LF Power Amplifier (Watts): 150
LF Distortion: Less than 0.05%
Power Cable: IEC Detachable
Power Switch: Yes
Inputs: 2 x RCA (L&R) / 2 x Speaker push terminal (L&R)
Mixer Controls: : Level, High Pass Filter Frequency, Phase, Auto On
Other Controls / Features: Thru Puts: 2 x RCA (L&R) / 2 x Speaker push terminal (L&R)
Feet: Yes
Dimensions (DWH xbackW, inches): 15 x 14.5 x 15
Dimensions (DWH xbackW, cm): 38 x 37 x 38
Weight (lbs/kg): 37 / 17

TC Electronic

BM9S

Active subwoofer, one 10" woofer.

The BM 9S subwoofer is intended to operate with the BM series monitors, more specifically, the BM 5A monitor. It is extremely well-suited for that extra punch to the bottom in setups where space is limited. The BM 9S delivers a clear, crispy and surprisingly powerful punch when you take its almost diminutive size into account. The BM 9S will complement stereo and multichannel monitoring equally well and when daisy-chaining of subwoofers is needed, it sports a low level LFE input/output.

For significant control and enhancement of the general performance, the BM 9S is a closed cabinet type. This creates an internal pressure by which the woofer gains a considerable amount of precision when it comes to the reproduction of low frequent signals. This precision is easily audible and it augments the feeling of reality that the listener experiences.

The BM 9S is very suitable for the following production environments:

• Post Production
• Music Recording and Mixing
• Film Editing (smaller rooms)
• DVD authoring and Mastering
• Multichannel Production (Audio or Audio for pictures)
• Broadcast
• Edit suites
• OB vans

The BM 9S is designed according to the strict BM series specifications. With a 10” woofer and 200 Watts of power, and virtually minute dimensions, this sub is tailor-made to take care of even the most comprehensive challenges where space is scarce. Being every bit as versatile as the rest of the BM series, BM 9S is a very competent partner for smaller stereo and multichannel setups, giving a very powerful system for even the most demanding users across the globe.

The Auto On/Off function, provides a minimized idle energy usage by shutting off after minutes of no input signal. The auto sensing circuit enables BM9S to automatically come to life when input signal is detected.

The satellite filters that this sub sports, provides high-pass filtering of the monitor source signal allowing 60Hz or 80Hz corner frequencies.
This is a huge advantage for the monitor performance, as the satellites do not need to deal with power consuming lower frequencies. This leaves all the satellite power to greatly accelerate performance and precision.

Features:

• 10" woofer
• Phase adjustment in 0° / 180°
• Auto on/off, power LED
• Mode selection, LFE or slave
• Adjustment of low-pass corner frequencies (50-150Hz)
• SAT/SUB high-pass adjustment, Flat, 60 Hz, 80 Hz
• Small dimensions: 11.6" X 11.4" X 12.5"
• 200 W @ 4 Ohms
• Discrete LFE input, slave output for linking
• Closed cabinet for extremely precise low frequency reproduction

System: Active Subwoofer
Frequency Response (+/- 3 dB): 29 Hz - 250 Hz
Low Frequency Limit: 29 Hz
High Frequency Limit: 50 Hz - 250 Hz
Amplifier Power: 200 W @ 4 Ohm
Crossover Frequencies HP Sat:: Flat / 60 Hz / 80 Hz
Low Pass Filter: 50 – 150 Hz
Crossover Slope: 2nd order Butterworth
Crossover Bypass: Yes (Flat)
Phase adjustment: 0° / 180°
Inputs: Balanced/XLR
Input Sensitivity for Full Output: 75mV - 5V
Maximum Input: 10Vrms
Input Impedance: 20 k (+ branch) 10k (- branch)
Output: Balanced/XLR
Master / Slave Link: Yes
Drive Unit: 10" (24 cm), long throw
Magnetic Shielding: Yes
Internal Cabinet Volume: 15,9 litres
Bass Principle: Closed
Power Consumption Max.: 325 W
Power Consumption Standby: 16 W
Mains Voltage: 100-120V 50/60Hz or 220-240V 50/60Hz
Weight (net): 10 kg / 22 lbs
Dimensions (W x H x D): 294 x 289 x 318 mm / 11.6" x 11.4" x 12.5"
EMC: -
Complies with: EN 55103-1 and EN 55103-2, FCC part 15 class B, CISPR 22 class B
Safety: -
Certified to: IEC 60065, EN 60065, UL 6500 and CSA E60065 CSA FILE LR108093
Enviroment: -
Operating temperature: 32° F to 122° F (0° C to 50° C)
Storage temperature: -22° F to 167° F (-30° C to 70° C)
Humidity: Max. 90 % non-condensing
Warranty
2 years on parts and labor
Depending on setting
Please refer to your local network

TC Electronic

BM14S

Active subwoofer, one 12” woofer

The BM 14S subwoofer is perfectly aligned for operation with the BM and M series monitors.
For larger multichannel setups with e.g. five M1.5's, multiple BM 14S's will be a preferred choice.

The BM 14S is designed to take care of the most challenging requests and it will compliment larger stereo and multichannel setups in even the most demanding studios.

The BM 14S has been designed as a closed cabinet type subwoofer. This type of cabinet design gives you significant control and enhancement of the general performance as the closed cabinet creates an internal pressure. This adds considerably to the amount of accurately reproduced low frequency signals. When audio reproduction is more accurate, it will add to the sense of reality, and the BM 14S ensures exactly that.

The BM 14S is very suitable for the following production environments:

• Post Production
• Music Recording and Mixing
• Film Editing
• DVD authoring and Mastering
• Multichannel Production (Audio or Audio for pictures)
• Broadcast
• Edit suites

With a substantial 300 watts of power coming from the 12” woofer and an impressive low frequency limit of 18 Hz, this subwoofer is the perfect match for the BM and M series monitors.
With an auto On/Off function, energy usage shuts off after minutes of no input signal, thereby saving energy when the subwoofer is idle. As soon as an input is detected, the auto sensing circuit enables the subwoofer to come back to life.

A satellite filter feature is provided by the BM 14S, enabling adjustment of low-pass corner frequencies from 50 to 150Hz of the monitor source signal. The subwoofer will thus take care of the lower and power consuming frequencies, and thereby adding to the performance and clarity of the monitors in the system. This is due to the high-pass filtering feature that the BM 14S comes with. If the need arises to daisy-chain more subwoofers to the same system, the low level LFE output gives you exactly that choice.

Features:

• 12" woofer
• Phase adjustment in 0° / 180°
• Auto on/off, power LED
• Mode selection, LFE or slave
• Seamless adjustment of low-pass corner Frequencies
• SAT/SUB high-pass adjustment, Flat, 60 Hz, 80 Hz
• Dimensions: 13.8" x 14.5" x 16.5" / 350 x 368 x 420 mm
• 300 W @ 4 Ohms
• Discrete LFE input, slave output for linking
• Closed cabinet for extremely precise low frequency reproduction

System: Active Subwoofer
Frequency Response (+/- 3 dB): 18 Hz - 250 Hz Sub input, 18 Hz - 250 Hz LFE input
Low Frequency Limit: 18 Hz
High Frequency Limit: 50 Hz - 250 Hz Sub input, 150 Hz LFE input
Amplifier Power: 300 W @ 4 Ohms
Crossover Frequencies HP Sat:: Flat / 60 Hz / 80 Hz
Low Pass filter: 50 – 150 Hz
Crossover Slope: 2nd order Butterworth
Crossover Bypass: Yes (Flat)
Phase adjustment: 0° / 180°
Inputs: Balanced/XLR
Input Sensitivity for Full Output: 75 mV – 5 V
Maximum Input: 10 Vrms
Input Impedance: 10kohms
Output: Balanced / XLR
Master / Slave Link: Yes
Drive Unit: 12" (30 cm), long throw
Magnetic Shielding: Yes
Internal Cabinet Volume: 31 litres
Bass Principle: Closed
Power Consumption: Max. 325 W
Power Consumption Standby: < 3 W
Mains Voltage: 100-120 V @ 50 - 60Hz
Weight (net): 21 kg
Dimensions (W x H x D): 350 x 368 x 420 mm / 13.8" x 14.5" x 16.5"