FC-KJ1

Features:

• Flight Case holds one KJ-6000 mixer and two CDG-1020 PRO players
• Spring-loaded handle
• Removable hinged top cover and folding front panel
• Road ready and built to last!
• Shipping Dimensions: 16" (L) x 35" (W) x 9" (H)
• Shipping Weight: 30 lbs

G-TOUR EFX2

ATA Wood Flight Rack Case 2U 15" Deep

Features:

• 9mm plywood construction with PVC exterior
• Red recessed twist latches and spring-loaded rubber-gripped handles
• Heavy-duty commercial grade plated hardware and reinforced stackable ball corners
• 3.2mm thick front and rear rack rails
• Tongue and groove extruded aluminum valance

G-TOUR EFX4

ATA Wood Flight Rack Case 4U 15" Deep

Features:

• 9mm plywood construction with PVC exterior
• Red recessed twist latches and spring-loaded rubber-gripped handles
• Heavy-duty commercial grade plated hardware and reinforced stackable ball corners
• 3.2mm thick front and rear rack rails
• Tongue and groove extruded aluminum valance

• Fixed back single section welded frame construction
• Comes with removable 18 gauge mounting panel for easy wall installation
• 18 gauge removable side panels with spring latch
• 18 gauge SPCC cold rolled steel top and bottom
• Fan ready perforated top
• 11 gauge drilled and tapped front and rear rack rails
• Rack U number printed on the rack rails
• 10/32 rack screws
• 1/2", 5/8", 3/4", 1"1 and 1 1/2" cable entry knockouts on top and bottom
• 5/8" knockout design to be used for VHF/UHF antenna
• 10" x 10" rear access knockout for cable entry
• Front door features 18 gauge solid steel

G-TOUR EFX6

ATA Wood Flight Rack Case 6U 15" Deep

Features:

• 9mm plywood construction with PVC exterior
• Red recessed twist latches and spring-loaded rubber-gripped handles
• Heavy-duty commercial grade plated hardware and reinforced stackable ball corners
• 3.2mm thick front and rear rack rails
• Tongue and groove extruded aluminum valance

• Reversible wall mounted hinged rack
• Rear mounting section offers "shelf" design for easier installation
• Hinged back double welded frame construction
• 16 gauge removable side panels with spring latch
• 16 gauge cold rolled steel top and bottom
• 11 gauge drilled and tapped front and rear rack rails
• Rack U numbers printed on the rack rails
• 10/32 rack screws
• 1/2", 5/8", 3/4", 1"1 and 1 1/2" cable entry knockouts on top and bottom
• 5/8" knockout design to be used for VHF/UHF antenna
• 10" x 10" rear access knockout for cable entry
• Front door features 18 gauge solid steel

• Fixed back single section welded frame construction
• Comes with removable 18 gauge mounting panel for easy wall installation
• 18 gauge removable side panels with spring latch
• 18 gauge SPCC cold rolled steel top and bottom
• Fan ready perforated top
• 11 gauge drilled and tapped front and rear rack rails
• Rack U number printed on the rack rails
• 10/32 rack screws
• 1/2", 5/8", 3/4", 1"1 and 1 1/2" cable entry knockouts on top and bottom
• 5/8" knockout design to be used for VHF/UHF antenna
• 10" x 10" rear access knockout for cable entry
• Front door features toughened glass with vented sides and spring loaded push and turn locking system

• Fixed back single section welded frame construction
• Comes with removable 18 gauge mounting panel for easy wall installation
• 18 gauge removable side panels with spring latch
• 18 gauge SPCC cold rolled steel top and bottom
• Fan ready perforated top
• 11 gauge drilled and tapped front and rear rack rails
• Rack U number printed on the rack rails
• 10/32 rack screws
• 1/2", 5/8", 3/4", 1"1 and 1 1/2" cable entry knockouts on top and bottom
• 5/8" knockout design to be used for VHF/UHF antenna
• 10" x 10" rear access knockout for cable entry
• Front door features 18 gauge solid steel

• Reversible wall mounted hinged rack
• Rear mounting section offers "shelf" design for easier installation
• Hinged back double welded frame construction
• 16 gauge removable side panels with spring latch
• 16 gauge cold rolled steel top and bottom
• 11 gauge drilled and tapped front and rear rack rails
• Rack U numbers printed on the rack rails
• 10/32 rack screws
• 1/2", 5/8", 3/4", 1"1 and 1 1/2" cable entry knockouts on top and bottom
• 5/8" knockout design to be used for VHF/UHF antenna
• 10" x 10" rear access knockout for cable entry
• Front door features 18 gauge solid steel

FC-90

Features:

• Heavy-duty protection
• for pro-audio components
• ATA-approved flight case
• 21 RUs of rack-space: 8 RUs on the front,
• 13 RUs on top
• 2 spring-loaded handles on each side
• Removable front and rear covers
• Road ready and built to last!
• Shipping Dimensions:
• 29” (L) x 22” (W) x 29” (H)
• Shipping Weight: 54 lbs

• Hinged back double section welded frame construction
• 18 gauge removable side panels with spring latch
• 18 gauge SPCC cold rolled steel top and bottom
• Fan ready perforated top
• 11 gauge drilled and tapped front and rear rack rails
• Rack U number printed on the rack rails
• 10/32 rack screws
• 1/2", 5/8", 3/4", 1"1 and 1 1/2" cable entry knockouts on top and bottom
• 5/8" knockout design to be used for VHF/UHF antenna
• 10" x 10" rear access knockout for cable entry
• Also available with M6 rails
• Front door features 18 gauge solid steel

FC-99

Features:

• Heavy-duty protection
• for pro-audio components
• ATA-approved flight case
• 23 RUs of rack-space: 10 RUs on the
• front, 13 RUs on top
• 2 spring-loaded handles on each side
• Removable front and rear covers
• Road ready and built to last!
• Shipping Dimensions:
• 29” (L) x 22” (W) x 33” (H)
• Shipping Weight: 56 lbs

G-SHOCK-4L

• Lightweight polyethylene construction
• Independent rubber shock absorbers at each corner
• 360 degree air ventilation around equipment
• Threaded, field replaceable 7mm zinc-plated steel rack rails
• Adjustable interior sliding support on each side of rack adjusts from to back and up and down for rear support of gear
• Comfortable recessed side handles and locking lids
• Heat-treated 10/32 rail bolts & washers included

• Hinged back double section welded frame construction
• 18 gauge removable side panels with spring latch
• 18 gauge SPCC cold rolled steel top and bottom
• Fan ready perforated top
• 11 gauge drilled and tapped front and rear rack rails
• Rack U number printed on the rack rails
• 10/32 rack screws
• 1/2", 5/8", 3/4", 1"1 and 1 1/2" cable entry knockouts on top and bottom
• 5/8" knockout design to be used for VHF/UHF antenna
• 10" x 10" rear access knockout for cable entry
• Also available with M6 rails
• Front door features toughened glass with vented sides and spring loaded push and turn locking system

• Fixed back single section welded frame construction
• Comes with removable 18 gauge mounting panel for easy wall installation
• 18 gauge removable side panels with spring latch
• 18 gauge SPCC cold rolled steel top and bottom
• Fan ready perforated top
• 11 gauge drilled and tapped front and rear rack rails
• Rack U number printed on the rack rails
• 10/32 rack screws
• 1/2", 5/8", 3/4", 1"1 and 1 1/2" cable entry knockouts on top and bottom
• 5/8" knockout design to be used for VHF/UHF antenna
• 10" x 10" rear access knockout for cable entry
• Front door features toughened glass with vented sides and spring loaded push and turn locking system

• Reversible wall mounted hinged rack
• Rear mounting section offers "shelf" design for easier installation
• Hinged back double welded frame construction
• 16 gauge removable side panels with spring latch
• 16 gauge cold rolled steel top and bottom
• 11 gauge drilled and tapped front and rear rack rails
• Rack U numbers printed on the rack rails
• 10/32 rack screws
• 1/2", 5/8", 3/4", 1"1 and 1 1/2" cable entry knockouts on top and bottom
• 5/8" knockout design to be used for VHF/UHF antenna
• 10" x 10" rear access knockout for cable entry
• Image shows steel front door, actual front door features toughened glass with vented sides and spring loaded push and turn locking system

• Lightweight polyethylene construction
• Independent rubber shock absorbers at each corner
• 360 degree air ventilation around equipment
• Threaded, field replaceable 7mm zinc-plated steel rack rails
• Adjustable interior sliding support on each side of rack adjusts from to back and up and down for rear support of gear
• Comfortable recessed side handles and locking lids
• Heat-treated 10/32 rail bolts & washers included

• Hinged back double section welded frame construction
• 18 gauge removable side panels with spring latch
• 18 gauge SPCC cold rolled steel top and bottom
• Fan ready perforated top
• 11 gauge drilled and tapped front and rear rack rails
• Rack U number printed on the rack rails
• 10/32 rack screws
• 1/2", 5/8", 3/4", 1"1 and 1 1/2" cable entry knockouts on top and bottom
• 5/8" knockout design to be used for VHF/UHF antenna
• 10" x 10" rear access knockout for cable entry
• Also available with M6 rails
• Front door features 18 gauge solid steel

• Reversible wall mounted hinged rack
• Rear mounting section offers "shelf" design for easier installation
• Hinged back double welded frame construction
• 16 gauge removable side panels with spring latch
• 16 gauge cold rolled steel top and bottom
• 11 gauge drilled and tapped front and rear rack rails
• Rack U numbers printed on the rack rails
• 10/32 rack screws
• 1/2", 5/8", 3/4", 1"1 and 1 1/2" cable entry knockouts on top and bottom
• 5/8" knockout design to be used for VHF/UHF antenna
• 10" x 10" rear access knockout for cable entry
• Image shows steel front door, actual front door features toughened glass with vented sides and spring loaded push and turn locking system

• Reversible wall mounted hinged rack
• Rear mounting section offers "shelf" design for easier installation
• Hinged back double welded frame construction
• 16 gauge removable side panels with spring latch
• 16 gauge cold rolled steel top and bottom
• 11 gauge drilled and tapped front and rear rack rails
• Rack U numbers printed on the rack rails
• 10/32 rack screws
• 1/2", 5/8", 3/4", 1"1 and 1 1/2" cable entry knockouts on top and bottom
• 5/8" knockout design to be used for VHF/UHF antenna
• 10" x 10" rear access knockout for cable entry
• Front door features 18 gauge solid steel

• Reversible wall mounted hinged rack
• Rear mounting section offers "shelf" design for easier installation
• Hinged back double welded frame construction
• 16 gauge removable side panels with spring latch
• 16 gauge cold rolled steel top and bottom
• 11 gauge drilled and tapped front and rear rack rails
• Rack U numbers printed on the rack rails
• 10/32 rack screws
• 1/2", 5/8", 3/4", 1"1 and 1 1/2" cable entry knockouts on top and bottom
• 5/8" knockout design to be used for VHF/UHF antenna
• 10" x 10" rear access knockout for cable entry
• Front door features 18 gauge solid steel

G-SHOCK-12L

ATA Molded PE Shock Rack with Rubber Shock Suspension 12U

Features:

• Lightweight polyethylene construction
• Independent rubber shock absorbers at each corner
• 360 degree air ventilation around equipment
• Threaded, field replaceable 7mm zinc-plated steel rack rails
• Adjustable interior sliding support on each side of rack adjusts from to back and up and down for rear support of gear
• Comfortable recessed side handles and locking lids
• Heat-treated 10/32 rail bolts & washers included

• Reversible wall mounted hinged rack
• Rear mounting section offers "shelf" design for easier installation
• Hinged back double welded frame construction
• 16 gauge removable side panels with spring latch
• 16 gauge cold rolled steel top and bottom
• 11 gauge drilled and tapped front and rear rack rails
• Rack U numbers printed on the rack rails
• 10/32 rack screws
• 1/2", 5/8", 3/4", 1"1 and 1 1/2" cable entry knockouts on top and bottom
• 5/8" knockout design to be used for VHF/UHF antenna
• 10" x 10" rear access knockout for cable entry
• Image shows steel front door, actual front door features toughened glass with vented sides and spring loaded push and turn locking system

• Hinged back double section welded frame construction
• 18 gauge removable side panels with spring latch
• 18 gauge SPCC cold rolled steel top and bottom
• Fan ready perforated top
• 11 gauge drilled and tapped front and rear rack rails
• Rack U number printed on the rack rails
• 10/32 rack screws
• 1/2", 5/8", 3/4", 1"1 and 1 1/2" cable entry knockouts on top and bottom
• 5/8" knockout design to be used for VHF/UHF antenna
• 10" x 10" rear access knockout for cable entry
• Also available with M6 rails
• Front door features toughened glass with vented sides and spring loaded push and turn locking system

• Reversible wall mounted hinged rack
• Rear mounting section offers "shelf" design for easier installation
• Hinged back double welded frame construction
• 16 gauge removable side panels with spring latch
• 16 gauge cold rolled steel top and bottom
• 11 gauge drilled and tapped front and rear rack rails
• Rack U numbers printed on the rack rails
• 10/32 rack screws
• 1/2", 5/8", 3/4", 1"1 and 1 1/2" cable entry knockouts on top and bottom
• 5/8" knockout design to be used for VHF/UHF antenna
• 10" x 10" rear access knockout for cable entry
• Image shows steel front door, actual front door features toughened glass with vented sides and spring loaded push and turn locking system

• Reversible wall mounted hinged rack
• Rear mounting section offers "shelf" design for easier installation
• Hinged back double welded frame construction
• 16 gauge removable side panels with spring latch
• 16 gauge cold rolled steel top and bottom
• 11 gauge drilled and tapped front and rear rack rails
• Rack U numbers printed on the rack rails
• 10/32 rack screws
• 1/2", 5/8", 3/4", 1"1 and 1 1/2" cable entry knockouts on top and bottom
• 5/8" knockout design to be used for VHF/UHF antenna
• 10" x 10" rear access knockout for cable entry
• Front door features 18 gauge solid steel

• Hinged back double section welded frame construction
• 18 gauge removable side panels with spring latch
• 18 gauge SPCC cold rolled steel top and bottom
• Fan ready perforated top
• 11 gauge drilled and tapped front and rear rack rails
• Rack U number printed on the rack rails
• 10/32 rack screws
• 1/2", 5/8", 3/4", 1"1 and 1 1/2" cable entry knockouts on top and bottom
• 5/8" knockout design to be used for VHF/UHF antenna
• 10" x 10" rear access knockout for cable entry
• Also available with M6 rails
• Front door features 18 gauge solid steel

G-SHOCK-16L

ATA Molded PE Shock Rack with Rubber Shock Suspension 16U

Features:

• Lightweight polyethylene construction
• Independent rubber shock absorbers at each corner
• 360 degree air ventilation around equipment
• Threaded, field replaceable 7mm zinc-plated steel rack rails
• Adjustable interior sliding support on each side of rack adjusts from to back and up and down for rear support of gear
• Comfortable recessed side handles and locking lids
• Heat-treated 10/32 rail bolts and washers included

GR-WH5B1822TB

Reversible Wall Hanging Hinged Rack Steel Door 18U 22" Deep

Features:

• Reversible wall mounted hinged rack
• Rear mounting section offers "shelf" design for easier installation
• Hinged back double welded frame construction
• 16 gauge removable side panels with spring latch
• 16 gauge cold rolled steel top and bottom
• 11 gauge drilled and tapped front and rear rack rails
• Rack U numbers printed on the rack rails
• 10/32 rack screws
• 1/2", 5/8", 3/4", 1"1 and 1 1/2" cable entry knockouts on top and bottom
• 5/8" knockout design to be used for VHF/UHF antenna
• 10" x 10" rear access knockout for cable entry
• Front door features 18 gauge solid steel

• Hinged back double section welded frame construction
• 18 gauge removable side panels with spring latch
• 18 gauge SPCC cold rolled steel top and bottom
• Fan ready perforated top
• 11 gauge drilled and tapped front and rear rack rails
• Rack U number printed on the rack rails
• 10/32 rack screws
• 1/2", 5/8", 3/4", 1"1 and 1 1/2" cable entry knockouts on top and bottom
• 5/8" knockout design to be used for VHF/UHF antenna
• 10" x 10" rear access knockout for cable entry
• Also available with M6 rails
• Front door features toughened glass with vented sides and spring loaded push and turn locking system

GR-WH5B1817TD

Reversible Wall Hanging Hinged Rack Glass Door 18U 17" Deep

Features:

• Reversible wall mounted hinged rack
• Rear mounting section offers "shelf" design for easier installation
• Hinged back double welded frame construction
• 16 gauge removable side panels with spring latch
• 16 gauge cold rolled steel top and bottom
• 11 gauge drilled and tapped front and rear rack rails
• Rack U numbers printed on the rack rails
• 10/32 rack screws
• 1/2", 5/8", 3/4", 1"1 and 1 1/2" cable entry knockouts on top and bottom
• 5/8" knockout design to be used for VHF/UHF antenna
• 10" x 10" rear access knockout for cable entry
• Image shows steel front door, actual front door features toughened glass with vented sides and spring loaded push and turn locking system

GR-WH5B1822TD

Reversible Wall Hanging Hinged Rack Glass Door 18U 22" Deep

Features:

• Reversible wall mounted hinged rack
• Rear mounting section offers "shelf" design for easier installation
• Hinged back double welded frame construction
• 16 gauge removable side panels with spring latch
• 16 gauge cold rolled steel top and bottom
• 11 gauge drilled and tapped front and rear rack rails
• Rack U numbers printed on the rack rails
• 10/32 rack screws
• 1/2", 5/8", 3/4", 1"1 and 1 1/2" cable entry knockouts on top and bottom
• 5/8" knockout design to be used for VHF/UHF antenna
• 10" x 10" rear access knockout for cable entry
• Image shows steel front door, actual front door features toughened glass with vented sides and spring loaded push and turn locking system