|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recently Viewed Categories
|
|
|
![]()
Click Image to Enlarge
|
|
Martin
Stagebar 2
Item #Stagebar 2
List Price:
$2,650.00
Your Price:
Call for Best Price
Call for Best Price
|
|
|
Different Views & Angles
|
|
|
|
|
Description
Specification
Video
Manual
Review
Stagebar 2 With twice the lumen output and 10 times the intensity of the Stagebar 54, the Stagebar 2 is an extremely capable LED pixel bar and wash luminaire. This exceptional performance is obtained by combining the latest LED technology with an advanced lens design. The Stagebar 2 offers a wide range of shades from an RGBAW color mixing system and is useful for displaying imagery and video or for floodlighting surfaces and stages.
Features
- RGBAW color mixing system for outstanding color palette
- Factory color calibration
- Over 3,000 lm per ft (almost 10,000 lm per meter)
- Super high intensity and tighter beam due to advanced lens design
- Opal diffuser lens for scenic on-camera looks
- Quiet operation
- Daisy chained power and data
- Battery-powered control menu for off-site setup without power
Physical
Length: 420 mm (16.5 in.), Stagebar 2 S
Length: 630 mm (24.8 in.), Stagebar 2 L
Width: 190 mm (7.5 in.)
Height: 105 mm (4.1 in.)
Weight: 5.5 kg (12.1 lbs.) without bracket, Stagebar 2 S
Weight: 7.3 kg (16.1 lbs.) without bracket, Stagebar 2 L
Dynamic Effects
Color mixing: RGBAW
Red: 0 - 100%
Green: 0 - 100%
Blue: 0 - 100%
Amber: 0 - 100%
White: 0 - 100%
Control and Programming
Color control modes: RGBAW, RGB, HSI, HSIC
DMX channels: 3 - 30
Grouped pixel control options: 6 x 1 (individual), 3 x 2, 2 x 3 or 1 x 6 (all as one group) pixels
DMX address setting: Manual, auto addressing and auto address copy
Fixture setup: Onboard control panel with display
Display: Battery-powered backlit LCD, 2 x 16 characters
16-bit control (internal): RGBAW, RGB, HSI, HSIC
Protocol: USITT DMX512-A
Receiver: RS-485
Firmware update: Serial upload via DMX link
Photometric Data
Light source: Cree XP-E high power emitters
Total LED power per bar: 150 W
Even pitch across adjacent fixtures: Horizontal/vertical (Stagebar 2 L), horizontal (Stagebar 2 S)
Total output (max.): 3650 lm
Construction
Color: Black
Housing: Steel and aluminum
Finish: Electrostatic powder-coated
Protection rating: IP20
Installation
Mounting points: Adjustable mounting bracket, 1/4-turn locks, four M6 threaded holes
Orientation: Any
Connections
Power in/out: Neutrik PowerCon
Data in/out: 5-pin locking XLR
Electrical
AC power: 100-240 V nominal, 50/60 Hz
Power supply unit: Integrated, auto-sensing multi-voltage
Power output fuse: 15 AT (slow blow)
Main fuse: 4 AT (slow blow)
Typical Power and Current
100 V, 50 Hz: 238 W. 2.5 A, PF 0.998
100 V, 60 Hz: 240 W, 2.5 A, PF 0.998
110 V, 60 Hz: 237 W, 2.3 A, PF 0.997
120 V, 60 Hz: 233 W, 2.1 A, PF 0.996
208 V, 60 Hz: 228 W, 1.2 A, PF 0.986
220 V, 50 Hz: 227 W, 1.1 A, PF 0.986
220 V, 60 Hz: 244 W, 1.3 A, PF 0.984
230 V, 50 Hz: 225 W, 1.1 A, PF 0.986
240 V, 50 Hz: 224 W, 1.0 A, PF 0.984
Figures apply to both S and L models with all LEDs at max. intensity. Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Thermal
Cooling: Filtered forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
Maximum surface temperature, steady state, Ta=40° C: 90° C (194° F)
Total heat dissipation (calculated, +/- 10%): 860 BTU/hr.
Licensing
Available under license from Color Kinetics Incorporated
|
|
|
|
|
|
|
|
|
|
0 Item
Download Product Features
